ac_help="$ac_help
--enable-debug enable nmh code debugging"
ac_help="$ac_help
+ --with-hash-backup use # as the backup prefix (default: ,)"
+ac_help="$ac_help
--enable-masquerade[='draft_from mmailid username_extension']
enable up to 3 types of address masquerading [none]"
ac_help="$ac_help
ac_help="$ac_help
--with-editor=EDITOR specify the default editor"
ac_help="$ac_help
- --with-mts=MTS specify the mail transport agent/service"
+ --with-cyrus-sasl=<dir> Specify location of Cyrus SASL library for auth"
+ac_help="$ac_help
+ --with-mts=MTS specify the default mail transport agent/service"
ac_help="$ac_help
--with-pager=PAGER specify the default pager"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:599: checking host system type" >&5
+echo "configure:603: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:620: checking target system type" >&5
+echo "configure:624: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:638: checking build system type" >&5
+echo "configure:642: checking build system type" >&5
build_alias=$build
case "$build_alias" in
enable_debug=yes
fi
+# Check whether --with-hash-backup or --without-hash-backup was given.
+if test "${with_hash_backup+set}" = set; then
+ withval="$with_hash_backup"
+ :
+fi
+
+if test x"$with_hash_backup" != x -a x"$with_hash_backup" != x"no"; then
+ backup_prefix="#"
+else
+ backup_prefix=","
+fi
+cat >> confdefs.h <<EOF
+#define BACKUP_PREFIX "$backup_prefix"
+EOF
+
# Check whether --enable-masquerade or --disable-masquerade was given.
if test "${enable_masquerade+set}" = set; then
enableval="$enable_masquerade"
editorpath="$with_editor"
fi
+# Check whether --with-cyrus-sasl or --without-cyrus-sasl was given.
+if test "${with_cyrus_sasl+set}" = set; then
+ withval="$with_cyrus_sasl"
+ :
+fi
+
+if test x"$with_cyrus_sasl" != x -a x"$with_cyrus_sasl" != "no"; then
+ cat >> confdefs.h <<\EOF
+#define CYRUS_SASL 1
+EOF
+fi
+
# Check whether --with-mts or --without-mts was given.
if test "${with_mts+set}" = set; then
withval="$with_mts"
if test x"$with_mts" = x"smtp"; then
MTS="smtp"
- MTSLIB="mts/smtp/libsmtp.a"
- cat >> confdefs.h <<\EOF
-#define SMTPMTS 1
-EOF
elif test x"$with_mts" = x"sendmail"; then
MTS="sendmail"
- MTSLIB="mts/sendmail/libsend.a"
- cat >> confdefs.h <<\EOF
-#define SENDMTS 1
-EOF
else
MTS="smtp"
- MTSLIB="mts/smtp/libsmtp.a"
- cat >> confdefs.h <<\EOF
-#define SMTPMTS 1
-EOF
fi
+cat >> confdefs.h <<\EOF
+#define SMTPMTS 1
+EOF
# Check whether --with-pager or --without-pager was given.
if test "${with_pager+set}" = set; then
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:837: checking for $ac_word" >&5
+echo "configure:859: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:867: checking for $ac_word" >&5
+echo "configure:889: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:918: checking for $ac_word" >&5
+echo "configure:940: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:972: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 961 "configure"
+#line 983 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:992: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1014: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:997: checking whether we are using GNU C" >&5
+echo "configure:1019: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1025: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1047: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1075: checking for working const" >&5
+echo "configure:1097: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1080 "configure"
+#line 1102 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x = {0,0};
+typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
; return 0; }
EOF
-if { (eval echo configure:1129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1150: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1172: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1187: checking for a BSD compatible install" >&5
+echo "configure:1209: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1241: checking for $ac_word" >&5
+echo "configure:1263: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1272: checking for $ac_word" >&5
+echo "configure:1294: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1303: checking for $ac_word" >&5
+echo "configure:1325: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1337: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1359: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1345 "configure"
+#line 1367 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "cut", so it can be a program name with args.
set dummy cut; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1382: checking for $ac_word" >&5
+echo "configure:1404: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_cutpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "lclint", so it can be a program name with args.
set dummy lclint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1419: checking for $ac_word" >&5
+echo "configure:1441: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_linttmp1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "lint", so it can be a program name with args.
set dummy lint; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1452: checking for $ac_word" >&5
+echo "configure:1474: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_linttmp2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "libtool", so it can be a program name with args.
set dummy libtool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1492: checking for $ac_word" >&5
+echo "configure:1514: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIBTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "lorder", so it can be a program name with args.
set dummy lorder; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1528: checking for $ac_word" >&5
+echo "configure:1550: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LORDER'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "tsort", so it can be a program name with args.
set dummy tsort; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1557: checking for $ac_word" >&5
+echo "configure:1579: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_TSORT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
TSORT=cat
fi
+echo $ac_n "checking whether tsort can deal with loops""... $ac_c" 1>&6
+echo "configure:1612: checking whether tsort can deal with loops" >&5
+if eval "test \"`echo '$''{'nmh_cv_tsort_loop'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "`echo a b b a | tsort 2>/dev/null | grep a`" ; then
+ nmh_cv_tsort_loop=no
+ else
+ nmh_cv_tsort_loop=yes
+ fi
+fi
+
+echo "$ac_t""$nmh_cv_tsort_loop" 1>&6
+if test x$nmh_cv_tsort_loop = xno ; then
+ LORDER=echo
+ TSORT=cat
+ fi
+
pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
# Extract the first word of "ls", so it can be a program name with args.
set dummy ls; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1593: checking for $ac_word" >&5
+echo "configure:1633: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_lspath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$lspath" != "no"; then
echo $ac_n "checking how to get ls to show us the group ownership of a file""... $ac_c" 1>&6
-echo "configure:1629: checking how to get ls to show us the group ownership of a file" >&5
+echo "configure:1669: checking how to get ls to show us the group ownership of a file" >&5
if eval "test \"`echo '$''{'nmh_cv_ls_grpopt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "more", so it can be a program name with args.
set dummy more; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1647: checking for $ac_word" >&5
+echo "configure:1687: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_morepath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "sendmail", so it can be a program name with args.
set dummy sendmail; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1689: checking for $ac_word" >&5
+echo "configure:1729: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_sendmailpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "vi", so it can be a program name with args.
set dummy vi; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1727: checking for $ac_word" >&5
+echo "configure:1767: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_vipath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for broken vi""... $ac_c" 1>&6
-echo "configure:1766: checking for broken vi" >&5
+echo "configure:1806: checking for broken vi" >&5
if eval "test \"`echo '$''{'nmh_cv_attvibug'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking where mail spool is located""... $ac_c" 1>&6
-echo "configure:1788: checking where mail spool is located" >&5
+echo "configure:1828: checking where mail spool is located" >&5
if eval "test \"`echo '$''{'nmh_cv_mailspool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$lspath" != "no" -a "$cutpath" != "no"; then
echo $ac_n "checking whether the mail spool is world-writable""... $ac_c" 1>&6
-echo "configure:1804: checking whether the mail spool is world-writable" >&5
+echo "configure:1844: checking whether the mail spool is world-writable" >&5
if eval "test \"`echo '$''{'nmh_cv_mailspool_world_writable'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$nmh_cv_mailspool_world_writable" 1>&6
fi
-if test x"$nmh_cv_mailspool_world_writable" = x"no"; then
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1859: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1874 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1880: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1891 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1908 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+ac_safe=`echo "lockfile.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for lockfile.h""... $ac_c" 1>&6
+echo "configure:1940: checking for lockfile.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1945 "configure"
+#include "confdefs.h"
+#include <lockfile.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1950: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ echo $ac_n "checking for lockfile_create in -llockfile""... $ac_c" 1>&6
+echo "configure:1967: checking for lockfile_create in -llockfile" >&5
+ac_lib_var=`echo lockfile'_'lockfile_create | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-llockfile $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 1975 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char lockfile_create();
+
+int main() {
+lockfile_create()
+; return 0; }
+EOF
+if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_lib=HAVE_LIB`echo lockfile | sed -e 's/^a-zA-Z0-9_/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+ LIBS="-llockfile $LIBS"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Extract the first word of "dotlockfile", so it can be a program name with args.
+set dummy dotlockfile; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2021: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_dotlockfilepath'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$dotlockfilepath" in
+ /*)
+ ac_cv_path_dotlockfilepath="$dotlockfilepath" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_dotlockfilepath="$dotlockfilepath" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_dotlockfilepath="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_dotlockfilepath" && ac_cv_path_dotlockfilepath="no"
+ ;;
+esac
+fi
+dotlockfilepath="$ac_cv_path_dotlockfilepath"
+if test -n "$dotlockfilepath"; then
+ echo "$ac_t""$dotlockfilepath" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "$ac_cv_lib_lockfile_lockfile_create" != "no" ; then
+ if test "$ac_cv_path_dotlockfilepath" != "no" ; then
+ echo $ac_n "checking whether dotlockfile is setgid""... $ac_c" 1>&6
+echo "configure:2057: checking whether dotlockfile is setgid" >&5
+if eval "test \"`echo '$''{'nmh_cv_dotlockfile_setgid'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -g "$ac_cv_path_dotlockfilepath" ; then
+ nmh_cv_dotlockfile_setgid=yes
+ else
+ nmh_cv_dotlockfile_setgid=no
+ fi
+fi
+
+echo "$ac_t""$nmh_cv_dotlockfile_setgid" 1>&6
+ fi
+fi
+
+if test x"$nmh_cv_mailspool_world_writable" = x"no" -a x"$nmh_cv_dotlockfile_setgid" != x"yes" ; then
cat >> confdefs.h <<\EOF
#define MAILGROUP 1
EOF
fi
echo $ac_n "checking what group owns the mail spool""... $ac_c" 1>&6
-echo "configure:1826: checking what group owns the mail spool" >&5
+echo "configure:2080: checking what group owns the mail spool" >&5
if eval "test \"`echo '$''{'nmh_cv_ls_mail_grp'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1842: checking for $ac_hdr that defines DIR" >&5
+echo "configure:2096: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1847 "configure"
+#line 2101 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:1855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2109: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1880: checking for opendir in -ldir" >&5
+echo "configure:2134: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1888 "configure"
+#line 2142 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1921: checking for opendir in -lx" >&5
+echo "configure:2175: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1929 "configure"
+#line 2183 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1963: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 1978 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1995 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2001: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <<EOF
-#line 2012 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2018: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2043: checking for ANSI C header files" >&5
+echo "configure:2217: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2048 "configure"
+#line 2222 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2056: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2230: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2073 "configure"
+#line 2247 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2091 "configure"
+#line 2265 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2112 "configure"
+#line 2286 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2147: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2321: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2152 "configure"
+#line 2326 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2161: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2335: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2182: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2356: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2187 "configure"
+#line 2361 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2203: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:2224: checking whether stat file-mode macros are broken" >&5
+echo "configure:2398: checking whether stat file-mode macros are broken" >&5
if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2229 "configure"
+#line 2403 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2286: checking for $ac_hdr" >&5
+echo "configure:2460: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2291 "configure"
+#line 2465 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2470: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking POSIX termios""... $ac_c" 1>&6
-echo "configure:2325: checking POSIX termios" >&5
+echo "configure:2499: checking POSIX termios" >&5
if eval "test \"`echo '$''{'nmh_cv_sys_posix_termios'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2330 "configure"
+#line 2504 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <unistd.h>
tcgetattr(0, 0);
; return 0; }
EOF
-if { (eval echo configure:2340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
nmh_cv_sys_posix_termios=yes
else
if test $nmh_cv_sys_posix_termios = yes; then
echo $ac_n "checking TIOCGWINSZ in termios.h""... $ac_c" 1>&6
-echo "configure:2356: checking TIOCGWINSZ in termios.h" >&5
+echo "configure:2530: checking TIOCGWINSZ in termios.h" >&5
if eval "test \"`echo '$''{'nmh_cv_header_termios_h_tiocgwinsz'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2361 "configure"
+#line 2535 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <termios.h>
int x = TIOCGWINSZ;
; return 0; }
EOF
-if { (eval echo configure:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
nmh_cv_header_termios_h_tiocgwinsz=yes
else
if test $nmh_cv_header_termios_h_tiocgwinsz = no; then
echo $ac_n "checking TIOCGWINSZ in sys/ioctl.h""... $ac_c" 1>&6
-echo "configure:2388: checking TIOCGWINSZ in sys/ioctl.h" >&5
+echo "configure:2562: checking TIOCGWINSZ in sys/ioctl.h" >&5
if eval "test \"`echo '$''{'nmh_cv_header_sys_ioctl_h_tiocgwinsz'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2393 "configure"
+#line 2567 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/ioctl.h>
int x = TIOCGWINSZ;
; return 0; }
EOF
-if { (eval echo configure:2401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
nmh_cv_header_sys_ioctl_h_tiocgwinsz=yes
else
ac_safe=`echo "libio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libio.h""... $ac_c" 1>&6
-echo "configure:2424: checking for libio.h" >&5
+echo "configure:2598: checking for libio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2429 "configure"
+#line 2603 "configure"
#include "confdefs.h"
#include <libio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2434: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat > conftest.$ac_ext <<EOF
-#line 2452 "configure"
+#line 2626 "configure"
#include "confdefs.h"
#include <libio.h>
EOF
ac_safe=`echo "sys/ptem.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/ptem.h""... $ac_c" 1>&6
-echo "configure:2474: checking for sys/ptem.h" >&5
+echo "configure:2648: checking for sys/ptem.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2479 "configure"
+#line 2653 "configure"
#include "confdefs.h"
#include <sys/ptem.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2484: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2658: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2510: checking for pid_t" >&5
+echo "configure:2684: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2515 "configure"
+#line 2689 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2544: checking for vfork.h" >&5
+echo "configure:2718: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2549 "configure"
+#line 2723 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2554: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2579: checking for working vfork" >&5
+echo "configure:2753: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2585: checking for vfork" >&5
+echo "configure:2759: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2590 "configure"
+#line 2764 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2613: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2635 "configure"
+#line 2809 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
fi
echo $ac_n "checking for mkstemp in -lmkstemp""... $ac_c" 1>&6
-echo "configure:2753: checking for mkstemp in -lmkstemp" >&5
+echo "configure:2927: checking for mkstemp in -lmkstemp" >&5
ac_lib_var=`echo mkstemp'_'mkstemp | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmkstemp $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2761 "configure"
+#line 2935 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
mkstemp()
; return 0; }
EOF
-if { (eval echo configure:2772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
sethostent getutent
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2804: checking for $ac_func" >&5
+echo "configure:2978: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2809 "configure"
+#line 2983 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:2858: checking for gethostbyname" >&5
+echo "configure:3032: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 3037 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:2886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:2907: checking for gethostbyname in -lnsl" >&5
+echo "configure:3081: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2915 "configure"
+#line 3089 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:2926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for sigsetjmp""... $ac_c" 1>&6
-echo "configure:2953: checking for sigsetjmp" >&5
+echo "configure:3127: checking for sigsetjmp" >&5
cat > conftest.$ac_ext <<EOF
-#line 2955 "configure"
+#line 3129 "configure"
#include "confdefs.h"
#include <setjmp.h>
int main() {
sigsetjmp((void *)0, 0);
; return 0; }
EOF
-if { (eval echo configure:2962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_SIGSETJMP 1
for ac_func in snprintf strerror strdup
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2979: checking for $ac_func" >&5
+echo "configure:3153: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2984 "configure"
+#line 3158 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat > conftest.$ac_ext <<EOF
-#line 3035 "configure"
+#line 3209 "configure"
#include "confdefs.h"
#include <grp.h>
EOF
else
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 3049 "configure"
+#line 3223 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
cat > conftest.$ac_ext <<EOF
-#line 3068 "configure"
+#line 3242 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
echo $ac_n "checking for modf""... $ac_c" 1>&6
-echo "configure:3084: checking for modf" >&5
+echo "configure:3258: checking for modf" >&5
if eval "test \"`echo '$''{'ac_cv_func_modf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3089 "configure"
+#line 3263 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char modf(); below. */
; return 0; }
EOF
-if { (eval echo configure:3112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_modf=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for modf in -lm""... $ac_c" 1>&6
-echo "configure:3130: checking for modf in -lm" >&5
+echo "configure:3304: checking for modf in -lm" >&5
ac_lib_var=`echo m'_'modf | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3138 "configure"
+#line 3312 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
modf()
; return 0; }
EOF
-if { (eval echo configure:3149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:3180: checking for gethostbyname" >&5
+echo "configure:3354: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3185 "configure"
+#line 3359 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:3208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:3226: checking for gethostbyname in -lnsl" >&5
+echo "configure:3400: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3234 "configure"
+#line 3408 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:3245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gethostbyname in -lresolv""... $ac_c" 1>&6
-echo "configure:3271: checking for gethostbyname in -lresolv" >&5
+echo "configure:3445: checking for gethostbyname in -lresolv" >&5
ac_lib_var=`echo resolv'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3279 "configure"
+#line 3453 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:3290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:3322: checking for socket" >&5
+echo "configure:3496: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3327 "configure"
+#line 3501 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:3350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:3368: checking for socket in -lsocket" >&5
+echo "configure:3542: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3376 "configure"
+#line 3550 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:3387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
termcap_curses_order="termcap curses ncurses"
for lib in $termcap_curses_order; do
echo $ac_n "checking for tgetent in -l${lib}""... $ac_c" 1>&6
-echo "configure:3421: checking for tgetent in -l${lib}" >&5
+echo "configure:3595: checking for tgetent in -l${lib}" >&5
ac_lib_var=`echo ${lib}'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l${lib} $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3429 "configure"
+#line 3603 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:3440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
done
-ac_safe=`echo "lockfile.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for lockfile.h""... $ac_c" 1>&6
-echo "configure:3464: checking for lockfile.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3469 "configure"
-#include "confdefs.h"
-#include <lockfile.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for maillock in -llockfile""... $ac_c" 1>&6
-echo "configure:3491: checking for maillock in -llockfile" >&5
-ac_lib_var=`echo lockfile'_'maillock | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-llockfile $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3499 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char maillock();
-
-int main() {
-maillock()
-; return 0; }
-EOF
-if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo lockfile | sed -e 's/^a-zA-Z0-9_/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
-
- LIBS="-llockfile $LIBS"
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
echo $ac_n "checking for dbm_open""... $ac_c" 1>&6
-echo "configure:3543: checking for dbm_open" >&5
+echo "configure:3637: checking for dbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3548 "configure"
+#line 3642 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbm_open=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -lndbm""... $ac_c" 1>&6
-echo "configure:3589: checking for dbm_open in -lndbm" >&5
+echo "configure:3683: checking for dbm_open in -lndbm" >&5
ac_lib_var=`echo ndbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lndbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3597 "configure"
+#line 3691 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:3608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3702: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -ldbm""... $ac_c" 1>&6
-echo "configure:3634: checking for dbm_open in -ldbm" >&5
+echo "configure:3728: checking for dbm_open in -ldbm" >&5
ac_lib_var=`echo dbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3642 "configure"
+#line 3736 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:3653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3689: checking for $ac_hdr" >&5
+echo "configure:3783: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3694 "configure"
+#line 3788 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3793: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
HESIOD_LIBS="-L$with_hesiod/lib"
fi
echo $ac_n "checking for res_send""... $ac_c" 1>&6
-echo "configure:3732: checking for res_send" >&5
+echo "configure:3826: checking for res_send" >&5
if eval "test \"`echo '$''{'ac_cv_func_res_send'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3737 "configure"
+#line 3831 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char res_send(); below. */
; return 0; }
EOF
-if { (eval echo configure:3760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_res_send=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for res_send in -lresolv""... $ac_c" 1>&6
-echo "configure:3778: checking for res_send in -lresolv" >&5
+echo "configure:3872: checking for res_send in -lresolv" >&5
ac_lib_var=`echo resolv'_'res_send | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3786 "configure"
+#line 3880 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
res_send()
; return 0; }
EOF
-if { (eval echo configure:3797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for hes_resolve in -lhesiod""... $ac_c" 1>&6
-echo "configure:3827: checking for hes_resolve in -lhesiod" >&5
+echo "configure:3921: checking for hes_resolve in -lhesiod" >&5
ac_lib_var=`echo hesiod'_'hes_resolve | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lhesiod $HESIOD_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3835 "configure"
+#line 3929 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
hes_resolve()
; return 0; }
EOF
-if { (eval echo configure:3846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
KRB4_INCLUDES="-I/usr/include/kerberosIV"
fi
echo $ac_n "checking for krb_rd_req in -lkrb4""... $ac_c" 1>&6
-echo "configure:3880: checking for krb_rd_req in -lkrb4" >&5
+echo "configure:3974: checking for krb_rd_req in -lkrb4" >&5
ac_lib_var=`echo krb4'_'krb_rd_req | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb4 $KRB4_LIBS -ldes425 -lkrb5 -lcrypto -lcom_err $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3888 "configure"
+#line 3982 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
krb_rd_req()
; return 0; }
EOF
-if { (eval echo configure:3899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for krb_rd_req in -lkrb""... $ac_c" 1>&6
-echo "configure:3918: checking for krb_rd_req in -lkrb" >&5
+echo "configure:4012: checking for krb_rd_req in -lkrb" >&5
ac_lib_var=`echo krb'_'krb_rd_req | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb $KRB4_LIBS -ldes $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3926 "configure"
+#line 4020 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
krb_rd_req()
; return 0; }
EOF
-if { (eval echo configure:3937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
+if test x"$with_cyrus_sasl" != x -a x"$with_cyrus_sasl" != "no"; then
+ if test x"$with_cyrus_sasl" != x"yes"; then
+ SASL_INCLUDES="-I$with_cyrus_sasl/include"
+ SASL_LIBS="-L$with_cyrus_sasl/lib"
+ fi
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $SASL_LIBS"
+ echo $ac_n "checking for sasl_client_new in -lsasl""... $ac_c" 1>&6
+echo "configure:4064: checking for sasl_client_new in -lsasl" >&5
+ac_lib_var=`echo sasl'_'sasl_client_new | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsasl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4072 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char sasl_client_new();
+
+int main() {
+sasl_client_new()
+; return 0; }
+EOF
+if { (eval echo configure:4083: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SASL_LIBS="$SASL_LIBS -lsasl"
+else
+ echo "$ac_t""no" 1>&6
+{ echo "configure: error: Cyrus SASL library not found" 1>&2; exit 1; }
+fi
+
+ LDFLAGS="$save_LDFLAGS"
+fi
+
nmh_save_LIBS="$LIBS"
LIBS="$TERMLIB $LIBS"
echo $ac_n "checking if an include file defines ospeed""... $ac_c" 1>&6
-echo "configure:3967: checking if an include file defines ospeed" >&5
+echo "configure:4112: checking if an include file defines ospeed" >&5
if eval "test \"`echo '$''{'nmh_cv_decl_ospeed_include_defines'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3972 "configure"
+#line 4117 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if HAVE_TERMIOS_H
ospeed = 0;
; return 0; }
EOF
-if { (eval echo configure:3985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
nmh_cv_decl_ospeed_include_defines=yes
else
if test $nmh_cv_decl_ospeed_include_defines = no; then
echo $ac_n "checking if you must define ospeed""... $ac_c" 1>&6
-echo "configure:4001: checking if you must define ospeed" >&5
+echo "configure:4146: checking if you must define ospeed" >&5
if eval "test \"`echo '$''{'nmh_cv_decl_ospeed_must_define'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4006 "configure"
+#line 4151 "configure"
#include "confdefs.h"
int main() {
extern short ospeed; ospeed = 0;
; return 0; }
EOF
-if { (eval echo configure:4013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
nmh_cv_decl_ospeed_must_define=yes
else
LIBS="$nmh_save_LIBS"
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:4048: checking return type of signal handlers" >&5
+echo "configure:4193: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4053 "configure"
+#line 4198 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:4070: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4215: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:4089: checking for pid_t" >&5
+echo "configure:4234: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4094 "configure"
+#line 4239 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:4122: checking for off_t" >&5
+echo "configure:4267: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4127 "configure"
+#line 4272 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:4155: checking for uid_t in sys/types.h" >&5
+echo "configure:4300: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4160 "configure"
+#line 4305 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:4189: checking for mode_t" >&5
+echo "configure:4334: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4194 "configure"
+#line 4339 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:4222: checking for size_t" >&5
+echo "configure:4367: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4227 "configure"
+#line 4372 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking for sigset_t""... $ac_c" 1>&6
-echo "configure:4256: checking for sigset_t" >&5
+echo "configure:4401: checking for sigset_t" >&5
if eval "test \"`echo '$''{'nmh_cv_type_sigset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4261 "configure"
+#line 4406 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
sigset_t tempsigset;
; return 0; }
EOF
-if { (eval echo configure:4269: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
nmh_cv_type_sigset_t=yes
else
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:4290: checking for st_blksize in struct stat" >&5
+echo "configure:4435: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4295 "configure"
+#line 4440 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:4303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:4325: checking for tm_gmtoff in struct tm" >&5
+echo "configure:4470: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'nmh_cv_struct_tm_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4330 "configure"
+#line 4475 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
# include <sys/time.h>
struct tm temptm; temptm.tm_gmtoff = 0;
; return 0; }
EOF
-if { (eval echo configure:4346: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
nmh_cv_struct_tm_gmtoff=yes
else
fi
echo $ac_n "checking what style of signals to use""... $ac_c" 1>&6
-echo "configure:4367: checking what style of signals to use" >&5
+echo "configure:4512: checking what style of signals to use" >&5
if test $ac_cv_func_sigaction = yes -a $ac_cv_func_sigprocmask = yes; then
signals_style=POSIX_SIGNALS
cat >> confdefs.h <<\EOF
echo "$ac_t""$signals_style" 1>&6
echo $ac_n "checking where signal.h is located""... $ac_c" 1>&6
-echo "configure:4405: checking where signal.h is located" >&5
+echo "configure:4550: checking where signal.h is located" >&5
if eval "test \"`echo '$''{'nmh_cv_path_signal_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
s%@POPLIB@%$POPLIB%g
s%@POPSED@%$POPSED%g
s%@MTS@%$MTS%g
-s%@MTSLIB@%$MTSLIB%g
s%@smtpservers@%$smtpservers%g
s%@CC@%$CC%g
s%@SET_MAKE@%$SET_MAKE%g
s%@vipath@%$vipath%g
s%@editorpath@%$editorpath%g
s%@mailspool@%$mailspool%g
+s%@CPP@%$CPP%g
+s%@dotlockfilepath@%$dotlockfilepath%g
s%@SETGID_MAIL@%$SETGID_MAIL%g
s%@MAIL_SPOOL_GRP@%$MAIL_SPOOL_GRP%g
-s%@CPP@%$CPP%g
s%@LIBOBJS@%$LIBOBJS%g
s%@TERMLIB@%$TERMLIB%g
s%@HESIOD_INCLUDES@%$HESIOD_INCLUDES%g
s%@HESIOD_LIBS@%$HESIOD_LIBS%g
s%@KRB4_INCLUDES@%$KRB4_INCLUDES%g
s%@KRB4_LIBS@%$KRB4_LIBS%g
+s%@SASL_INCLUDES@%$SASL_INCLUDES%g
+s%@SASL_LIBS@%$SASL_LIBS%g
s%@SIGNAL_H@%$SIGNAL_H%g
CEOF
libary install path : ${nmhlib2}
config files install path : ${nmhsysconf2}
man page install path : ${nmhman}
+backup prefix : ${backup_prefix}
transport system : ${MTS}
default smtp servers : ${smtpservers}
default editor : ${editorpath}
email address masquerading : ${masquerade}
pop is enabled : ${pop_kinds}"
echo ""
-
-
-