echo "configuring for nmh-$VERSION"
AC_SUBST(VERSION)dnl
-dnl -------------------------
-dnl CHECK COMMAND LINE OPTION
-dnl -------------------------
-dnl What method of posting should post use?
-undefine([mts])dnl
-AC_ARG_WITH(mts,
-[ --with-mts=MTS specify the mail transport agent])
-
-if test x$with_mts = xsmtp; then
- MTS="smtp"
- MTSLIB="mts/smtp/libsmtp.a"
- AC_DEFINE(SMTPMTS)dnl
-elif test x$with_mts = xsendmail; then
- MTS="sendmail"
- MTSLIB="mts/sendmail/libsend.a"
- AC_DEFINE(SENDMTS)dnl
-else
- MTS="smtp"
- MTSLIB="mts/smtp/libsmtp.a"
- AC_DEFINE(SMTPMTS)dnl
-fi
-
-AC_SUBST(MTS)
-AC_SUBST(MTSLIB)
-
-dnl What should be the default editor?
-undefine([editor])dnl
-AC_ARG_WITH(editor,
-[ --with-editor=EDITOR specify the default editor])
-
-if test -n "$with_editor"; then
- editorpath="$with_editor"
-fi
-
-dnl What should be the default pager?
-undefine([pager])dnl
-AC_ARG_WITH(pager,
-[ --with-pager=PAGER specify the default pager])
+dnl --------------------------
+dnl CHECK COMMAND LINE OPTIONS
+dnl --------------------------
+
+dnl Allow users to send email from addresses other than their default?
+undefine([masquerade])dnl
+AC_ARG_ENABLE(masquerade,
+ [ --enable-masquerade[='draft_from[ mmailid[ username_extension]]']
+ enable 3 types of email address masquerading [none]],
+ [if test x"$enable_masquerade" = x"yes"; then
+ masquerade="draft_from mmailid username_extension"
+ else
+ masquerade="$enable_masquerade"
+ fi])
+AC_SUBST(masquerade)dnl
-if test -n "$with_pager"; then
- pagerpath="$with_pager"
-fi
+dnl Do you want to debug nmh?
+undefine([nmh-debug])dnl
+AC_ARG_ENABLE(nmh-debug,
+[ --enable-nmh-debug enable nmh code debugging])
dnl Do you want mhe support?
undefine([nmh-mhe])dnl
dnl mhe support is on by default, so define it unless
dnl explicitly disabled.
-if test x$enable_nmh_mhe != xno; then
+if test x$"enable_nmh_mhe" != x"no"; then
AC_DEFINE(MHE)dnl
fi
undefine([nmh-pop])dnl
AC_ARG_ENABLE(nmh-pop,
[ --enable-nmh-pop enable client-side support for pop])
-if test x$enable_nmh_pop = xyes; then
+if test x"$enable_nmh_pop" = x"yes"; then
AC_DEFINE(POP)dnl
POPLIB=popsbr.o
POPSED='/^%nmhbeginpop%/d;/^%nmhendpop%/d'
AC_SUBST(POPLIB)dnl
AC_SUBST(POPSED)dnl
+dnl What should be the default editor?
+undefine([editor])dnl
+AC_ARG_WITH(editor,
+[ --with-editor=EDITOR specify the default editor])
+
+if test -n "$with_editor"; then
+ editorpath="$with_editor"
+fi
+
+dnl Do you want support for hesiod
+AC_ARG_WITH(hesiod,
+[ --with-hesiod=PREFIX specify location of Hesiod])
+if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
+ AC_DEFINE(HESIOD)dnl
+fi
+
dnl Do you want client-side support for kpop
AC_ARG_WITH(krb4,
[ --with-krb4=PREFIX specify location of Kerberos V4 for kpop support])
-if test x$with_krb4 != x -a x$with_krb4 != xno; then
+if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
AC_DEFINE(KPOP)dnl
AC_DEFINE(KPOP_PRINCIPAL, "pop")dnl
fi
-dnl Do you want support for hesiod
-AC_ARG_WITH(hesiod,
-[ --with-hesiod=PREFIX specify location of Hesiod])
-if test x$with_hesiod != x -a x$with_hesiod != xno; then
- AC_DEFINE(HESIOD)dnl
+dnl What method of posting should post use?
+undefine([mts])dnl
+AC_ARG_WITH(mts,
+[ --with-mts=MTS specify the mail transport agent])
+
+if test x"$with_mts" = x"smtp"; then
+ MTS="smtp"
+ MTSLIB="mts/smtp/libsmtp.a"
+ AC_DEFINE(SMTPMTS)dnl
+elif test x"$with_mts" = x"sendmail"; then
+ MTS="sendmail"
+ MTSLIB="mts/sendmail/libsend.a"
+ AC_DEFINE(SENDMTS)dnl
+else
+ MTS="smtp"
+ MTSLIB="mts/smtp/libsmtp.a"
+ AC_DEFINE(SMTPMTS)dnl
fi
-dnl Do you want to debug nmh?
-undefine([nmh-debug])dnl
-AC_ARG_ENABLE(nmh-debug,
-[ --enable-nmh-debug enable nmh code debugging])
+AC_SUBST(MTS)dnl
+AC_SUBST(MTSLIB)dnl
+
+dnl What should be the default pager?
+undefine([pager])dnl
+AC_ARG_WITH(pager,
+[ --with-pager=PAGER specify the default pager])
+
+if test -n "$with_pager"; then
+ pagerpath="$with_pager"
+fi
+
+dnl What should be the default mail server(s)?
+undefine([smtpservers])dnl
+AC_ARG_WITH(smtpservers,
+[ --with-smtpservers='SMTPSERVER1[ SMTPSERVER2...]'
+ specify the default smtp server(s) [localhost]])
+if test -n "$with_smtpservers"; then
+ smtpservers="$with_smtpservers"
+else
+ smtpservers="localhost"
+fi
+AC_SUBST(smtpservers)dnl
dnl ----------------------------------------------------
dnl Default location is /usr/local/nmh/{bin,etc,lib,man}
dnl We want these before the checks,
dnl so the checks can modify their values.
test -z "$CFLAGS" && CFLAGS= auto_cflags=1
-if test x$enable_nmh_debug = xyes; then
+if test x"$enable_nmh_debug" = x"yes"; then
test -z "$LDFLAGS" && LDFLAGS=-g
fi
dnl use -O2 and some warning flags
dnl else use -O
if test -n "$auto_cflags"; then
- if test x$enable_nmh_debug = xyes; then
+ if test x"$enable_nmh_debug" = x"yes"; then
if test -n "$GCC"; then
test -z "$CFLAGS" && CFLAGS="-Wall -g" || CFLAGS="$CFLAGS -Wall -g"
else
fi])
if test "$nmh_cv_attvibug" = yes; then
- AC_DEFINE(ATTVIBUG)
+ AC_DEFINE(ATTVIBUG)dnl
fi
dnl ----------------------------------------------------------
fi
AC_SUBST(SETGID_MAIL)dnl
-dnl see if we can determine which group owns the mail spool dir
+dnl Use ls to see which group owns the mail spool directory.
AC_CACHE_CHECK(what group owns the mail spool, nmh_cv_ls_mail_grp,
[nmh_cv_ls_mail_grp=`$lspath -dL $nmh_cv_ls_grpopt $mailspool|$AWK '{print $4}'`
- dnl Should we just set it to whatever ls reports, rather than only allowing
- dnl certain values...?
- if test x$nmh_cv_ls_mail_grp = xmail; then
- MAIL_SPOOL_GRP="mail"
- elif test x$nmh_cv_ls_mail_grp = xwheel; then
- MAIL_SPOOL_GRP="wheel"
- else
- MAIL_SPOOL_GRP="'0'"
- fi])
+])
+MAIL_SPOOL_GRP=$nmh_cv_ls_mail_grp
AC_SUBST(MAIL_SPOOL_GRP)dnl
dnl ------------------
sighold sigrelse writev lstat uname tzset killpg mkstemp \
sethostent)
-dnl solaris screws ths up
+dnl solaris screws this up
AC_CHECK_FUNC(gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)],
AC_CHECK_LIB(nsl, gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)] ) )
AC_REPLACE_FUNCS(snprintf strerror strdup)
+dnl Look for the initgroups() declaration. On AIX 4.[13], Solaris 4.1.3, and
+dnl ULTRIX 4.2A the function is defined in libc but there's no declaration in
+dnl any system header.
+dnl
+dnl On Solaris 2.[456], the declaration is in <grp.h>. On HP-UX 9-11 and
+dnl (reportedly) FreeBSD 3.[23], it's in <unistd.h>. Any other locations we
+dnl need to check?
+AC_EGREP_HEADER(initgroups, grp.h, AC_DEFINE(INITGROUPS_HEADER, <grp.h>),
+ AC_EGREP_HEADER(initgroups, unistd.h,
+ AC_DEFINE(INITGROUPS_HEADER, <unistd.h>)))
+
dnl On AIX 4.1, snprintf() is defined in libc.a but there's no prototype in
dnl <stdio.h> or elsewhere. Apparently it's not officially supported (though it
dnl seems to work perfectly and IBM apparently uses it in internal code).
dnl ----------------
dnl CHECK FOR HESIOD
dnl ----------------
-if test x$with_hesiod != x -a x$with_hesiod != xno; then
- if test x$with_hesiod != xyes; then
+if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
+ if test x"$with_hesiod" != x"yes"; then
HESIOD_INCLUDES="-I$with_hesiod/include"
HESIOD_LIBS="-L$with_hesiod/lib"
fi
dnl ----------------------------------
dnl CHECK FOR KRB4 (Kerberos4 support)
dnl ----------------------------------
-if test x$with_krb4 != x -a x$with_krb4 != xno; then
- if test x$with_krb4 != xyes; then
+if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
+ if test x"$with_krb4" != x"yes"; then
KRB4_INCLUDES="-I$with_krb4/include"
if test -d "$with_krb4/include/kerberosIV"; then
KRB4_INCLUDES="$KRB4_INCLUDES -I$with_krb4/include/kerberosIV"
etc/Makefile man/Makefile, \
[test -z "$CONFIG_HEADERS" || echo > stamp-h])
+dnl Umm, what's the point of these assignments?? -- <dan-nmh@dilvish.speed.net>
eval "nmhbin=${bindir}"; eval "nmhbin2=${nmhbin}"
eval "nmhsysconf=${sysconfdir}"; eval "nmhsysconf2=${nmhsysconf}"
eval "nmhlib=${libdir}"; eval "nmhlib2=${nmhlib}"
echo "
nmh configuration
-----------------
-nmh version : ${VERSION}
-target os : ${target}
-compiler : ${CC}
-compiler flags : ${CFLAGS}
-linker flags : ${LDFLAGS}
-source code location : ${srcdir}
-binary install path : ${nmhbin2}
-libary install path : ${nmhlib2}
-config files install path : ${nmhsysconf2}
-man page install path : ${nmhman}
-transport system : ${MTS}
-default editor : ${editorpath}
-default pager : ${pagerpath}"
+nmh version : ${VERSION}
+target os : ${target}
+compiler : ${CC}
+compiler flags : ${CFLAGS}
+linker flags : ${LDFLAGS}
+source code location : ${srcdir}
+binary install path : ${nmhbin2}
+libary install path : ${nmhlib2}
+config files install path : ${nmhsysconf2}
+man page install path : ${nmhman}
+transport system : ${MTS}
+default smtp servers : ${smtpservers}
+default editor : ${editorpath}
+default pager : ${pagerpath}
+email address masquerading : ${masquerade}"
echo ""