1 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
3 * added check in fmt_compile() to handle a single-character
4 format string. fmt_compile() depends on having an array of
5 format characters with an empty item at the end. A
6 single-character format would cause programs using this
7 function to segfault because the algorithm used to decide on
8 the length of the array mistakenly created a single-item array
9 when the format string was one character. This eventually
10 caused problems when the program attempted to test item+1
13 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
15 * Richard Coleman threw out a lot of old MH-specific files in nmh.
16 Much of the stuff, indeed, is not worth saving, but there are
17 nuggets that are very worthwhile, and should probably be added
18 back in. Most important, IMHO, are the MH change logs, as they
19 can help answer questions like "Why is this code like this?" or
20 "How long has this been broken?" or "What was this ever used for?"
22 I've added a new file to the nmh tree called
23 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
24 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
25 to go from newest at the top to oldest at the bottom to match the
26 ChangeLog convention. Unfortunately there are no change logs for
27 versions of MH prior to 3 in the MH tar files available at
28 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
29 are MH-6.6 changes that aren't documented in the logs.
31 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
32 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
33 and its "catman"-type output are a pain to deal with, but I was
34 loath to throw away the formatting, so I converted the file to
35 HTML. The only actual markup in the body are the "<B>" and "<U>"
36 tags, and "<" and ">" instead of '<' and '>', so it's quite
37 doable to view the file in plain ASCII mode as well. Note that
38 some of the changes this file documents as having been made in
39 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
40 and later put in certain 6.8.4 stuff.
42 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
44 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
45 fixing apparent bugs in Dan Winship's new security quoting code:
47 Since upgrading, I've been getting the following errors
48 while attempting to process some MIME messages:
50 (1) Syntax error: Unterminated quoted string
55 (2) line 1/10 (END)Segmentation fault (core dumped)
57 (2) appears to be due to the testing of an unset pointer in
58 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
59 mis-quoting a filename being handed to the shell in
60 mhshowsbr.c:show_content_aux().
62 Resolving the pointer reference issue in
63 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
64 problem in the routine.
66 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
68 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
69 prevent core dumping on packf. Here's the note from his message:
71 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
72 core on a file w/o a From line with a line >= BUFSIZ.
73 I noticed this because I had a junk file in my mail
76 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
78 * wesley.craig@umich.edu did not document his previous KPOP patch,
79 so I did so, and asked him to check what I wrote. Unfortunately
80 he didn't notice my misunderstanding of his patch. I wrote that
81 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
82 exclusively, but if you leave it as "pop3", you can use Wesley's
83 new -kpop switch on a given invocation. Instead, however, -kpop
84 turned out to be necessary on every invocation, and a KPOP user
85 complained. Applied Wesley's new patch, which makes things work
86 like I thought his original patch did. After that, did one more
87 clarifying pass to the documentation in inc.man and msgchk.man.
89 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
91 * When I fixed the long-standing makedir() bugs in January, I had
92 the code call strtoul(..., 0), which I believed to be safe as all
93 modes specified as ASCII constants in the nmh code started with a
94 leading zero (signifying octal), which I did as it would work if
95 internal constants were ever changed to hex. Unfortunately I was
96 unaware of the "Folder-Protect:" .mh_profile entry, which
97 mh-profile.man documents as an octal-only constant, with no
98 leading zero required. I've changed the strtoul() call to an
99 atooi() call and removed the misleading leading zeroes on the
100 ASCII octal constants in the code and man pages. Also changed the
101 "Folder-Protect:" example in the man page to something more
102 interesting than a duplication of the default.
104 * When I added my --enable-masquerade option, you'll note that I
105 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
106 options too wordy and I'm not sure why Richard went that route.
107 I've renamed them to just --enable-*, but the old versions will
108 still work as well (they just aren't advertised).
110 * Added a line to the "nmh configuration" output saying whether
113 * Added a new README.developers file. From the file:
115 This file is intended to provide a few tips for anyone doing
116 development on nmh. Developers who learn things "the hard
117 way" about the nmh codebase (as opposed to local info best
118 encoded in a comment) are encouraged to share their wisdom
121 Currently the topics are "autoconf files" and "directory structure".
123 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
125 * Applied, after some finessing,
126 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
128 Here's a patch that allows you to add
130 --with-smtpservers=<some.host.name>
132 to the ./configure command line to set the "servers: " line in
133 etc/mts.conf. Around here, we use "mailhost" so that all
134 machines in the current domain just talk to a central machine
135 and nothing else runs an MTA. Now, I can use
137 --with-smtpservers=mailhost
139 instead of having to remember to fix this by hand (and often
140 forgetting to do so!).
142 * Inspired by Simon's patch, added an --enable-masquerade option
143 to configure. It will set the "masquerade:" line of mts.conf.
144 You may specify a subset of the three types of masquerading, like
145 --enable-masquerade="draft_from mmailid", or leave off explicit
146 arguments to enable all three types.
148 * Alphabetized the --enable and --with options in configure.in and
149 INSTALL and added documentation of the two new options to the latter.
151 * Added new dependency for mts.conf: Makefile. If this isn't
152 done, then when you reconfigure nmh with new values for
153 --enable-masquerade or --with-smtpservers, you'll fail to get an
154 updated copy of mts.conf.
156 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
158 It seems that some MUA's didn't handle y2k very well - ELM
159 seems to be one of them, and Ultrix's DXmail (based on MH!).
160 I've got a few emails this month that look like:
162 575 Jan 00 Xxxxxx Xxxx 3603 ...
164 22+ Jan 00 Xxx Xxxxx 1771 ...
166 The first has "15 Jan 100" as the date and the second has
167 "19 Jan 00" as the date. The following works around this so
168 that scan, show, sortm, etc work ok.
170 I put Simon's patch under the control of a new #define called
171 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
172 acconfig.h about when you might not want to #define it.
174 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
175 lexed on Solaris 2.6. Added missing dependency in
176 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
178 * Added scan.MMDDYY and scan.YYYYMMDD format files.
180 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
182 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
184 With the patch below, you can add lines like:
186 mhshow-suffix-application/msword: .doc
187 mhshow-suffix-application/PostScript: .ps
189 to the mhn.defaults file to append the given suffix to a
190 scratch file. This allows applications which require a
191 certain suffix to run properly.
193 * Removed -force_html from lynx entry in mhn.defaults.sh (I
194 believe older versions of lynx lack that option) and added
195 "mhshow-suffix-text/html: .html".
197 * Modified username_extension masquerading to only use the
198 extended address on generated [Resent-]From: lines and SMTP
199 envelope From:. With Neil's original implementation, nmh's global
200 idea of the username was changed, which would result in inc lying
201 and saying you had no new mail because it was looking for a
202 mailbox called, for instance, "dan-nmh" (where username was "dan"
203 and $USERNAME_EXTENSION was "-nmh").
205 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
207 There's a wrap-around problem that affects the implementation
208 of Zeller's congruence in dtime.c. This causes the day-of-week
209 calculations to fail for dates after Feb 29, 2000 (probably up
210 until some year far in the future).
212 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
214 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
216 I finally tracked down the problem in msh that was causing
217 errors whenever I tried to examine a 'mmdf' style mailbox.
219 It turns out that not enough memory was being allocated with
220 calloc(), causing memory pointers to be overwritten and
223 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
225 * Changed the new "plussed_user" option to mts.conf's
226 "masquerade:" to "username_extension" after getting feedback from
227 qmail users, who use '-' as a separator rather than '+'. Removed
228 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
229 which needs to include the appropriate separator for your MTA
230 ('-', '+', or whatever) as its first character.
232 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
234 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
236 * Added a note to DIFFERENCES stating that it's out-of-date
237 (Richard was the last one to update it) and that we should
238 consider only documenting incompatibilities with MH there.
240 * Implemented (and documented) a third kind of username
241 masquerading: "plussed user" masquerading. This one was suggested
242 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
243 "plussed user" feature, where mail sent to <user>+<string> will be
244 delivered to <user>. When it's enabled, it's controlled by the
245 $USERPLUS environment variable. How is it enabled? Well, that
248 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
249 changed it so that rather than being a boolean, it can be set to
250 any combination of the three values "draft_from", "mmailid", and
251 "plussed_user". Thus it is now possible to enable the three types
252 of masquerading individually.
254 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
255 where if it was turned on, ','s would no longer be considered
256 GECOS field delimiters.
258 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
260 * Changed the GECOS-field '&' translation behavior to be
261 controlled by the BSD42 #define rather than GCOS_HACK, since it's
262 apparently always appropriate on OSes where BSD42 is #defined, and
263 never appropriate on any other OSes. Thanks to Kimmo Suominen for
264 responding to my "What is this code here for?" comment in mts.c
265 and explaining the feature.
267 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
269 * Upped the version number to 1.0.3+dev (ideally this should be
270 done by whoever makes a release tar file, immediately after doing
273 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
274 patch, posted to comp.mail.mh, which he says prevents loss of mail
275 when inc'ing into a full filesystem.
277 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
278 so that stamp-h.in will be different each time configure.in and
279 related files are changed, making it easier to check it in (which
280 is necessary to prevent unnecessary autoconf calls).
282 * My declaration of initgroups() in slocal.c to eliminate the "no
283 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
284 use AC_EGREP_HEADER to see where initgroups() is declared, if
287 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
289 * Fix security hole in mhshowsbr.c which allowed untrusted shell
292 * Released nmh 1.0.3.
294 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
296 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
297 be surrounded by single quotes, as a shell is not spawned when
298 just saving files, and the filenames will end up with literal
299 quotes embedded in them.
301 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
303 * Whoever originally added the -help switch to all the commands
304 got too cute and had the option itself print out as "-(help)" in
305 the -help output. One theory is that they were making reference
306 to the fact that clearly you know about the -help option since
307 you're currently looking at its output. I think it's a bad idea
308 to overload the meaning of the parentheses, however -- they're
309 supposed to indicate what abbreviated prefix of the switch you're
312 The other theory is that because you can say something like
313 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
314 by the same list of switches you get with -help, they were saying
315 you can "sorta" abbreviate "-help" as "-". You don't get the
316 "Usage:" string, though, so it's not really the same thing.
318 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
320 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
322 The following patch fixes a problem with requesting a
323 service key for a machine that has multiple 'A' records. It
324 also makes "-kpop" a command line option, for users who
325 would like to use both "kpop" and "pop".
327 Did no testing of the new features, as I don't have access to a
330 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
332 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
334 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
336 * All %-escapes in mhn.defaults that actually expand to something
337 should be surrounded by single quotes. Added quotes to the ones
338 in mhn.defaults.sh that were missing them.
340 * Added check for lynx to write mhshow-show-text/html line in
343 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
345 * makedir() had multiple bugs dating back to MH. An octal
346 constant was apparently being interpreted as decimal, resulting in
347 directories with no user read or execute permissions, making
348 nested directory creation fail. And there wasn't even an
349 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
350 in .mh_profile) on the outer directories of a nested directory.
352 * A second `make install' would always fail because the check for
353 whether mh_profile.5 existed was written incorrectly.
355 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
357 * Added documentation on both types of masquerading to post's man
360 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
362 * Doug's portability fix of my setgid inc autodetection had a
363 caching bug -- if you re-ran configure, uip/Makefile would be
364 corrupted, and installation would bomb out on OSes where inc needs
367 * Implemented a new kind of email address masquerading. Usually,
368 when a user writes a custom "From:" header in a draft, nmh uses it
369 rather than generating one. However, the user's true address is
370 used in the SMTP envelope "From:" and is revealed in the "Sender:"
371 header. Now, when mmailid is set to non-zero, the envelope
372 "From:" uses the address specified in the draft "From:" header,
373 and there is no "Sender:" header. This is useful when sending on
374 behalf of a remote POP3 account or when remote mail robots
375 incorrectly use the envelope "From:" in preference to the body
376 "From:". This processing has only been implemented for post, not
377 for the undocumented spost (which was already missing some "From:"
378 processing that post has).
380 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
382 * Got rid of the rest of the gcc -Wall warnings that I didn't have
383 time for on 1999-07-15 (and, it would seem, some new ones people
384 introduced since then). The primary ones were the warnings that
385 default prototypes were being used for [v]snprintf() and
386 str[n]casecmp(). As of right now, there are _no_ compilation
387 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
390 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
392 * Move mhtest from bindir to libdir.
394 * Move sendfiles from libdir to bindir.
396 * Updated sendfiles manpage to reflect this change.
398 * Added documentation for -build and -file switches to repl and
399 forw manpages (patch from Peter Maydell).
401 * Fixed interaction between specifying -cc in profile and -group on
404 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
406 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
407 not unanimous support for my proposed even/odd release/developer
408 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
411 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
413 * Upped the version number to 1.0.3. If we don't do this, then
414 when people report bugs against 1.0.2, we won't know "which" 1.0.2
415 they're talking about (since the development source is publically
416 available via CVS). I think the Linux kernel version numbers are
417 a good model, so the next time we roll a tarball, it should be
418 version 1.0.4 (or higher -- anyhow, an even-numbered version).
420 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
422 * Released nmh-1.0.2.
424 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
426 * Added check for whether "libtool" is in fact gnu libtool. If
427 it is, it is not used. This is the wrong behavior. If vendor
428 XYZ later on decides to create yet another libtool, we'll be
429 caught again. This works for now.
431 * Minor updates to MACHINES refering to Mac OS X.
433 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
435 * Added check for "libtool" (a ranlib type tool for Mac OS X)
436 and modified Makefiles so that nmh will build under Mac OS X.
438 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
440 * Changed repl defaults to partly revert to MH behaviour,
441 "-cc all" is now only implied with -group.
443 * The replcomps template includes cc: header again (as in MH).
445 * Updated repl man page to reflect these changes.
447 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
449 * Tweaked configure to handle Solaris and SunOS after the BIND
450 changes. Both need more cleanup.
452 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
454 * Removed BIND define and replaced it with a check for
455 gethostbyname (to determine if the host is DNS aware) and a
456 check for sethostent. This appears to be the right thing to
457 do, but there is no explanation of the reasoning behind the
458 BIND define in the code and it appears to have been used for
461 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
463 * Updated manpages Makefile to link mh-profile.5 to
464 mh_profile.5 after installation. Suggestion from Richard Cohen
465 <richard@jubjub.demon.co.uk>.
467 * Modified configure.in to check for _IO_write_ptr and libio.h
468 to determine whether to define LINUX_STDIO instead of using
471 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
473 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
474 multiple machines in the past where the mail spool was a symlink
475 to a directory on another device with more free space.
477 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
479 * Fixed a portability problem in Doug's fix of a portability
480 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
482 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
484 * Added config.sub and config.guess to the list of files to be
487 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
488 added if a list of addresses was split over several header lines.
490 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
491 macros, regardless of platform.
493 * Allow q to quit mhshow, and n to skip to next part. Patch from
494 Kimmo Suominen <kim@tac.nyc.ny.us>.
496 * Modified mhstore to recognize attachments created by sendfiles
497 with x-conversions=gzip.
499 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
501 * added explicit cast to long from time_t for tclock in
504 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
505 it's needed for ioctl() anyway. This prevents a warning about
506 implicit definition of ioctl().
508 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
509 "User Configuration" section of config.h (moved @TOP@ in
510 acconfig.h) so they're easier to find, should someone actually
511 want to mess with them.
513 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
515 * updated Makefile.in so it recognized COMPLETION-TCSH and
516 COMPLETION-ZSH (only used in make nmhdist).
518 * added prototype for ruserpas to <h/prototypes.h>. Fixes
519 warnings in mhparse.c and mhbuildsbr.c.
521 * added include checks for <time.h> and <sys/time.h> to
522 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
523 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
525 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
526 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
527 warnings about implicit definition of mts_init().
529 * added <grps.h> to slocal.c to prevent warnings about
532 * added <h/signals.h> to prevent warning about missing SIGNAL
535 * added function prototypes to smtp.c, whatnowproc.c,
536 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
539 * explicitly declared mbx_style in mshcmds.c and lused in
540 fmtdump.c as type static int instead of just static to
543 * various code cleanups to prevent ambiguous statements
544 (brackets for if/thens and parens for complicated if
548 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
550 * commented out _cleanup() in mf.c because it's the only
551 location in all of the source code where it exists. It was
552 preventing compilation on at least linux.
554 * Added check for <db1/ndbm.h> which is the new location where
555 linux systems appear to be stuffing this header file.
557 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
559 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
561 * added mh_profile SEGV patch from Richard Cohen
562 <richard@jubjub.demon.co.uk> that prevents crashing when
563 mh_profile doesn't end in a newline. A similar patch was
564 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
566 * fixed bug in associated with MAILGROUP #define (group "mail"
567 is not universal) -- hard to believe, but true.
569 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
571 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
573 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
575 * Automated #define of MAILGROUP and installation of inc as setgid mail
576 when the mail spool directory isn't world-writable.
578 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
580 * slocal -debug used to leave a file in /tmp for each message
581 processed. Very bad for folks with slocal -debug in their .forward!
583 * Got rid of a ton of compilation warnings. Most were "junk"
584 warnings due to the use of gcc -Wall (without -Wno-parentheses),
585 but a few represented real bugs. There remain many warnings to be
586 tackled that are due to missing function prototypes (e.g. snprintf()).
588 * Default rcvdistcomps no longer puts a copy of all outgoing
589 messages in outbox. Added an rcvdistcomps.outbox that does.
591 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
593 * Updated configure to check for mkstemp (available on OpenBSD) and
594 substitute it for mktemp if available.
596 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
598 * Added config.sub and config.guess and updated acconfig.h and
599 configure.in to automatically detect system type and set the
602 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
604 * Released nmh-1.0.1.
606 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
608 * Fixed flist to properly deal with relative folder names.
609 Problem noted by Jerry Peek <jpeek@jpeek.com>.
611 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
612 well as the Kerberos 5 compat libraries. Based on a patch from
613 Assar Westerlund <assar@sics.se>.
615 * Added a check in configure.in to test if modf is in libc and
616 link with libm if not. This is needed by at least Digital UNIX.
617 Problem pointed out by Kevin Oberman <oberman@es.net>.
619 * Fix a bug from the "mhn -show" to "mhshow" renaming that
620 made the "list" command in whatnow not work for some users.
621 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
623 * Replaced "extern int errno" with "#include <errno.h>" in a
624 number of files. Suggested by Stephen Wilson Bailey
627 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
628 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
630 * Fixed a segmentation fault in inc. Patch originally from Ruud de
631 Rooij <r.c.m.derooij@twi.tudelft.nl>.
633 * Allow display of 8bit encoded messages. From Kimmo Suominen
636 * Fixed repl to not add line breaks in the middle of long
637 addresses when building a reply. From Ruud de Rooij
638 <r.c.m.derooij@twi.tudelft.nl>.
640 * Added -library switch to spost so it can parse user aliases like
641 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
643 * Changed configure.in's check for sigsetjmp to properly deal
644 with systems like Linux where it is a macro. From
645 <elleron@servtech.com>.
647 * Fixed a bug in whatnow that could cause it to sometimes exit
648 without prompting the user. Based on a patch by Richard Geiger
651 * Added code to deal with SIGPIPE in mhl so it doesn't print
652 "Broken pipe" if you quit out of the moreproc.
654 * Documentation: Added a note to MACHINES about Irix make. Added a
655 pointer to the online copy of the MH book in INSTALL. Added
656 some additional information to the whatnow and packf man pages,
657 suggested by Jerry Peek <jpeek@jpeek.com>.
659 * Updated INSTALL, FAQ, etc to not refer to Richard as the
660 maintainer or math.gatech.edu as the home any more.
662 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
666 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
667 mbx_open so that the mode of zero length maildrops
668 would not be changed.
670 * Replaced the substitute version of snprintf() with the
671 one from the Apache web server.
673 * Changed to default mode for creating new messages to 0600
674 (this should have been done a long time ago).
676 * Changed "flist" to handle searching for multiple sequences
677 for each folder. Also flist will now correctly split
678 Unseen-Sequence if it consists of multiple sequences.
680 * Added new switches `-unlink' and `-nounlink' to "refile".
682 * Added new switches `-unlink' and `-nounlink' to "rmm".
684 * More cleanups of slocal output. Changed adorn() to
685 send to stdout, instead of stderr (to match rest of
688 * Merged mbx_create() into mbx_open, so that creating and
689 opening a nonexistent maildrop is done atomically. This
690 removes a bad race condition.
692 * Fixed bug that caused slocal to be unable to save to MMDF
695 * Added new wrapper function usr_folder() to slocal.c to
696 handle adding message to folder (currently, it still uses
697 usr_pipe() to call rcvstore).
699 * seq_list() checks for empty folder before scanning for
700 sequence information.
702 * num_digits() in flist.c and folder.c now returns correct
703 value for 0. Also added sanity check.
705 * folder_delmsgs() now correctly decrements internal message
708 * Don't attempt to read sequence information if folder
711 * Split seq_read into seq_public and seq_private.
713 * Small change to sigmsg.awk, since newer versions of gawk
714 interpret 034 as octal.
716 * In flist, don't scan for sequence information in empty folder.
718 * Updated mhn.defaults.sh to output profile entries for mhshow,
719 mhstore, and mhbuild.
721 * Changed configuration parameter "mhn-access-ftp" to
722 "nmh-access-ftp". Updated man pages
724 * Moved the code in InitMultipart to reverse the order of the
725 parts in a multipart, into its own function "reverse_parts()".
727 * Changed code in mhbuildsbr.c to store unencoded content
728 in the c_cefile structure when building.
730 * Changed code in mhoutsbr.c to look for unencoded content
731 in the c_cefile structure when outputing message.
733 * Changed configuration parameter "mhn-cache" and
734 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
735 since it is used in mhstore, mhlist, and mhshow. Updated man pages
737 * Change configuration parameter "mhn-storage" to
738 "nmh-storage", since it is now used in mhstore, mhlist,
739 and mhshow. Updated man pages
741 * Add autoconf support for KPOP (kerberized pop).
743 * Add autoconf support for Hesiod.
745 * Split routines to output a message given a Content structure
746 (output_message, output_content, write7Bit, etc..) to a new
749 * Split output_content(), into output_content() and build_headers().
751 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
752 list of header fields, rather than reopening the message.
754 * Added free_header() to mhfree.c to free structures containing
755 header field information.
757 * Changed get_content() to use the linked list of header fields
758 when parsing the various MIME headers (Content-XXX).
760 * Changed get_content() to store linked list of header field
761 values when parsing a content.
763 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
764 routines in mhcachesbr.c to handle the content cache.
766 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
767 cache_content) into new file mhcachesbr.c.
769 * More calls to sprintf/strcpy (primarily in mhparse.c
770 and mhbuildsbr.c) converted to snprintf/strncpy.
772 * When a message is displayed with `mhshow', it is now
773 removed from the "unseen" sequence.
775 * Change the default "showmimeproc" to "mhshow".
777 * Split "mhn -show" off into separate command "mhshow".
779 * Split "mhn -store" off into separate command "mhstore".
781 * Split "mhn -list" off into separate command "mhlist".
783 * Add sanity checks to context_find(), context_replace(),
784 and context_del(), to abort if context file hasn't been
787 * Add calls to context_read(), to the beginning of all nmh
788 commands (instead of being called indirectly by context_find).
790 * Changes the "substitute" version of vsnprintf/snprintf for
791 operating systems without native versions, to just call the
792 native vsprintf(), and ignore the buffer length. This is
793 faster, but less secure than the previous version that used
794 temporary files. This should only be a problem for systems
795 which do not have a native snprintf(), and require `inc' to
798 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
800 * Changes client() routine to take additional parameter, which is
801 the buffer length of the parameter "response". Then added
802 buffer length checks for this parameter.
804 * Changed getws() to get_fields(), since that is apparently the
805 name of a wide character version of gets() on some archetitures.
807 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
809 * Change the code in most of the commands that take multiple
810 message names/sequences/ranges on the command, such that
811 the msgs array is expanded dynamically. This removes most
812 of the limits on the length of command lines.
814 * Add additional parameter to copyip(), to specify the
815 maximum number of strings that can be copied (security
818 * Create new function getarguments(), to massage the argument
819 vector before parsing it (add any arguments from your
820 profile to the beginning of the argument vector). This
821 also removed the general limit on the number of command line
824 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
828 * Added a new command "delete", that is available during
829 a "whatnow" session. It is equivalent to "quit -delete".
831 * Added another parameter to editfile (in whatnowsbr.c),
832 that controls whether editfile should remember the last
833 program that was exec'ed. This way the whatnow command
834 "mime", will not be re-executed if "edit" is later given
837 * Changed whatnowsbr.c, so that whatnow doesn't abort if
838 mhbuild returns an error.
840 * Added parameter to sendsbr(), so you may specify whether to
841 rename the draft file.
843 * Pass delay time to splitmsg() as a parameter, rather than
844 use a global variable.
846 * Moved code to rename draft file after sending message from
847 splitmsg and sendaux, to sendsbr.
849 * Removed all the code in viamail to split messages and then
850 mail them. Replaced this with the standard sendsbr.c routines.
852 * Changed sendsbr(), so that when splitting messages into
853 messages of type "message/partial", the header fields that
854 are copied are more compliant with RFC-2046.
856 * Fixed mhbuild to track temporary files better. They are
857 now correctly removed when mhbuild aborts.
859 * Created a new man page for "sendfiles". The information
860 about "mhn -viamail" in the "mhn" man page was moved to
863 * Changed the name of the "viamail" shell script to
864 "sendfiles". Modified "sendfiles" to use the new
867 * Moved the functionality for "mhn -viamail" out of mhn,
868 and into a separate executable called "viamail".
870 * When storing MIME contents to a folder using mhn -store,
871 they are now accumulated in a temporary file, and then added
872 to the folder using folder_addmsg().
874 * Moved code to save content to a folder from store_content
875 to new function output_content_folder.
877 * Moved code to save content to file from store_content to
878 new function output_content_file.
880 * Moved code to parse storage format string from store_content
881 to new function parse_format_string.
883 * Fix copy_some_headers() in mhstoresbr.c, so that the
884 correct header fields in the first enclosing message/partial
885 will be copied (according to RFC2046), when using mhn -store
886 to reassemble messages of type message/partial.
888 * Fixed bug to openFTP() in mhparse.c, that caused the
889 tmp file to not be removed, when transferring a
890 message/external file from ftp.
892 * Moved the code in mhparse.c to process -auto switch (scan
893 contents for the attribute "name"), to a new function
894 "get_storeproc" in mhstoresbr.c.
896 * Moved routines to free data structures related to MIME
897 content from mhparse.c and mhbuildsbr.c, to new file
900 * Moved code to show/display MIME content into new
903 * Moved code to store MIME content from into
904 new file mhstoresbr.c
906 * Moved code to parse MIME content into new
909 * Moved code to list information about MIME content
910 into new file mhlistsbr.c.
912 * Move part_ok(), type_ok(), content_error(), flush_errors(),
913 and set_endian() to new file mhmisc.c.
915 * Start to isolate the code to show, list, and store MIME
916 messages. One side effect is that only one flag (-show,
917 -list, or -store) can be used at a time now.
919 * mhn -store -auto wasn't storing file in correct directory.
921 * Removed a few dead variables from sbr/ruserpass.c
923 * move code for creating tmp files, and renaming the
924 the composition draft in mhbuild, from build_mime()
927 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
928 the -[no]auto switch (which isn't used in mhbuild).
930 * split mhn.c into mhn.c and mhnsbr.c (name later changed
933 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
935 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
939 * Added (unlisted) options [no]dashstuffing to send, post,
940 and whatnow to determine whether to do RFC934 quoting
941 (dashstuffing) for encapsulated BCC messages. The default
942 is still the same (dashstuffing).
944 * Changed the undocumented feature "nodashmunging" in forw
945 and mhl, into the documented feature "nodashstuffing". The
946 default for forw, is still "dashstuffing" for backward
947 compatibility, although I don't believe that bursting
948 RFC934 digests is very common anymore.
950 * Added an option to define REALLYDUMB in the default config.h.
951 But it is not on by default.
953 * moved creation of config file mts.conf from zotnet/mts
954 to etc. This simplified the Makefile in zotnet/mts.
956 * simplified directory support/general to etc.
958 * removed unneeded directory support/bboards.
960 * split getusername() into getusername() and getuserinfo().
962 * Changed getusr() routine to getusername().
964 * Slight cleanup in folder_pack.c on code that records the new
965 number of the "cur" message when packing.
967 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
971 * Change install process, so that hard linking the correct mts
972 library to libmts.a, is not necessary. The final link process
973 uses the original name of the library.
975 * Fixed bug in flist.c and folder.c, so that symbolic links which
976 point to directories, will not decrement the number of directory
979 * Split the function list_content (in mhn.c and mhbuild.c) into
980 list_content and list_debug.
982 * Don't pack (folder -pack) an empty folder.
984 * Exit gracefully in flist.c, if no sequence is specified,
985 and no "Unseen-Sequence" is given in nmh profile.
987 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
991 * Small clarification to the man page for `ali'.
993 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
994 are given, that order doesn't matter.
996 * Fix bug in seq_list.c when realloc'ing for
999 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1001 * Released nmh-0.23.
1003 * Add new section on "Transfer Encodings" to man page for mhbuild.
1005 * In mhbuild.c, split compose_content into compose_content
1006 (parse and execute composition string), and scan_content (scan
1007 content, decided transfer encoding, check for clash with boundary
1008 string). I did a good amount of rearranging of this code.
1010 * Moved definitions for data structures for parsing MIME
1011 messages from mhn.c and mhbuild.c to a new include
1014 * Small amount of rearranging in sendsbr.c
1016 * Small changes to MAIL.FILTERING file.
1018 * Add the file MAIL.FILTERING to nmh distribution.
1020 * Add line to packf so that if message begins with
1021 "X-Envelope-From:" field, it is converted to "From ".
1023 * Fix packf to add "From " line to beginning of message,
1024 even if Return-Path doesn't exist.
1026 * Add note to MACHINES file that on Linux, configure
1027 doesn't find the functions sigsetjmp/siglongjmp.
1029 * Fix configuration for machines that don't have (or find)
1030 sigsetjmp/siglongjmp.
1032 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1034 * Released nmh-0.22.
1036 * Add a configure check for sigsetjmp. Add some conditional
1037 #define's in h/signals.h in case it's not found.
1039 * Added additional notes about -auto switch in mhn man page.
1041 * Added note about MM_CHARSET environment variable to
1042 mh-profile(5) man page.
1044 * Fix signal problem in mhn.c (change setjmp/longjmp to
1045 sigsetjmp/siglongjmp).
1047 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1049 * Released nmh-0.22-pre1.
1051 * Changed the first line in mhl.format from
1052 " -- using template mhl.format -- " to a blank line.
1054 * Added note about automimeproc to mh-profile man page.
1056 * Reorganize the main entry point for parsing a MIME message
1057 or file in mhn. Add new function parse_file() as new main
1058 entry point for parsing MIME files.
1060 * Add note to mhn man page, that "mhn -file -" will accept the
1061 source message on the standard input.
1063 * Changed a sanity check in folder_realloc that was too strict.
1065 * -norfc934mode is now the default for mhbuild,
1066 rather than -rfc934mode.
1068 * Fix mhbuild, so that Content-Description and RFC-822 comments
1069 from #forw directive will be correctly included if there is
1072 * Change mhn to correctly default parts of multipart/digest to
1073 message/rfc822 (leftover code from rfc934mode was removed).
1075 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1078 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1080 * Released nmh-0.21.
1082 * If the file given to mhbuild is "-", then accept the draft on
1083 standard input, and output the MIME message to standard output.
1085 * Cleaned up code in mhbuild.c that decides what transfer
1088 * Cleaned up code in mhbuild.c that decides what character set
1089 to use for text contents.
1091 * Removed old hpux specific code from zotnet/tws/lexstring.c
1093 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1095 * Released nmh-0.21-pre2.
1097 * Added the "decode" variable to mhl.format and mhl.header.
1099 * Added new variable "decode" to mhlsbr.c to decode text in
1100 header fields as per RFC-2047.
1102 * Make sure that when decoding RFC-2047 header fields, that any
1103 spaces at the ends of the encoded text are not ignored, but the
1104 spaces between encoded word are.
1106 * Removed #ifdef's for MIME. MIME support is always compiled in.
1108 * scan/inc will now decode both Subject and From lines as
1109 RFC-2047 encoded header fields.
1111 * Added new function write_charset_8bit() to sbr. It returns
1112 the character set to use for 8bit text in composition draft.
1113 Changed mhbuild to use this function.
1115 * Split mhn man page into man pages for mhn and mhbuild.
1117 * mhn -show will only now only use default method for content
1118 of type plain, if it is NOT a part of a multipart/alternative.
1120 * Split mhn -build into mhbuild. Did some code cleanup.
1122 * Added support for %(decode) to fmtdump.c.
1124 * check_charset() now accepts US-ASCII as a subset of any
1125 ISO-8859-X character set.
1127 * Changed the default "showproc" to mhl, instead of the
1130 * When reading file into mhn composition file, only need read
1131 permissions, not write permissions.
1133 * Added own version of strcasecmp to distribution, since
1134 nmh calls it frequently with NULL pointers (ughh).
1136 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1139 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1141 * Released nmh-0.21-pre1.
1143 * If a message is missing charset parameter to text/plain, show
1144 will assume US-ASCII, rather than just calling showmimeproc.
1146 * Change show.c and mshcmds.c to use check_charset to see if text
1147 message contains valid character set.
1149 * Added new scan format file "scan.nomime" to support/general
1150 that doesn't do any RFC-2047 decoding.
1152 * Modified all the scan format files in support/general to do
1153 RFC-2047 decoding of Subject field.
1155 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1156 ignore whitespace between two valid encoded words, but not
1157 between an encoded word and normal text.
1159 * Created new file sbr/check_charset.c. Moved code from
1160 fmt_rfc2047.c to check for valid character set to this file.
1162 * Added format escape %(decode) to decode contents of "str" register
1163 as a RFC-2047 header field.
1165 * The command install-mh now recognizes the switches -version
1168 * Added a new argument to print_help.c to decide whether to
1169 print profile entries (needed for install-mh to prevent weird
1172 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1173 is initialize to max (mp->lowmsg, 1) rather than always 1.
1175 * Changed macros for sequence/attribute manipulation so that
1176 message status array doesn't need to always start at 1.
1178 * Small cleanups in folder_realloc().
1180 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1182 * Released nmh-0.20.
1184 * Added configure option --with-pager=PAGER.
1186 * Added configure option --with-editor=EDITOR.
1188 * Changed the default format file for mhl (mhl.format) to
1189 also ignore (not display) the header fields Content-Type,
1190 Content-Transfer-Encoding, and Content-ID
1192 * Fixed core dump in addrsbr.c when using %(proper) format function
1193 and the To: line was missing.
1195 * Added the file ZSH.COMPLETION to the distribution.
1197 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1199 * Released nmh-0.20-pre2.
1201 * Added new switch -snoop to both `msgchk' and `inc', so you can
1202 watch the POP transaction.
1204 * Changed "replgroupcomps" to check for Mail-Followup-To header
1205 first, and use it if available.
1207 * Changed "replcomps" to check for Mail-Reply-To header
1208 first, and use it if available.
1210 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1212 * Released nmh-0.20-pre1.
1214 * Changed seq_list.c to dynamically enlarge the buffer for
1215 collecting the message ranges in a long sequence line.
1216 This should remove the last hard limit on the size of a
1219 * Changed seq_read.c so that can read long sequence lines.
1220 It will use multiple calls to m_getfld() when m_getfld()
1221 returns the state FLDPLUS.
1223 * Changed brkstring.c to dynamically add more space for pointers
1224 if necessary. This is needed when splitting up large sequence
1227 * Did some small cleanups in seq_save.c.
1229 * Added new switches `-[no]unseen' to rcvstore, to control
1230 whether new messages are added to Unseen-Sequence.
1232 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1234 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1235 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1237 * Changed "replcomps" to not include CC and TO lines so that
1238 that reply message is only directed at the author of the
1239 message to which you are replying.
1241 * Added new switch `-group' to command repl, which causes repl
1242 to use new forms file "replgroupcomps". This is intended for
1243 making group replies.
1245 * Removed #ifdef for ATHENA.
1247 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1249 * Released nmh-0.19.
1251 * Fix repl,forw so that switch `-form file' will not abort
1252 as ambiguious (silly mistake on my part).
1254 * Cleaned up the mhn man page. Added info about a few escapes
1255 for the formatting/display strings that were not documented
1256 (%%, %t). Moved the BNF grammar for the mime composition file,
1257 to the end of the man page.
1259 * Added the options -[no]format to the command repl. The
1260 switch `-format' will filter the message to which you are
1261 replying with the standard message filter "mhl.reply", which
1262 is now included in the distribution. The `-noformat' option
1263 will negate the use of -format or -filter and not include
1264 the message to which you are replying in the draft.
1266 * Did some cleaning and reorganization on many of the man
1269 * Added debugging switch `-debug' to mhparam, which displays
1270 the values of all `procs' (and some other misc configuration
1271 info) that nmh keeps in global variables.
1273 * When using `refile -preserve', if a conflict occurs, then use
1274 the next available number above the message number you wish
1277 * In forw.c, split the code for creating MIME style forwarding
1278 out of copy_draft, and into copy_mime_draft.
1280 * Move routines in mark.c to print sequences, into new
1281 file sbr/seq_print.c
1283 * flist will now update the current folder.
1285 * Added the switches -[no]fast to flist, to replace
1286 -[no]total. The previous switches are still accepted
1287 but now undocumented.
1289 * More reorganization in flist of the code for
1292 * The command "flist +foo -all" will now scan the folder
1293 "foo" and all its 1st level children.
1295 * Add missing include file <h/mh.h> to sbr/snprintf.c
1297 * Fix alarm bug in rcvtty, so that when it calls external
1298 process, the alarm is never longer than 30 minutes.
1300 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1302 * Released nmh-0.18.
1304 * Fixed bug in mark, so that "mark -list -seq foo" will
1305 correctly indicate if "foo" is a private sequence. I found
1306 this bug mentioned in Jerry Peek's book.
1308 * Simplified the code in seq_setcur(), since seq_addmsg() now
1309 retains the public/private status of sequences.
1311 * Changed sequence handling so that if the switches -public
1312 or -nopublic, are not specified for the commands mark, pick,
1313 or rcvstore, then existing sequences will retain their
1314 previous public/private status.
1316 * mhparam now handles the mh-sequences profile entry
1319 * flist -all will now also check readonly folders (for
1322 * Improve the leaf optimization for folder command.
1323 It will now track the number of directories in a folder,
1324 and stop stat'ing files once it has hit all the subfolders.
1326 * Renamed m_getfolder to getfolder. Changed getfolder to
1327 take option to determine whether it should get current
1328 folder, or just default folder (Inbox). Changed rcvstore,
1329 inc, and rmf to use the new getfolder.
1331 * flist now indicates if a sequence is private.
1333 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1334 wait for stopped processes.
1336 * conflict will dynamically allocate space for group names,
1337 so it can now handle system with more than 100 groups.
1339 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1341 * Released nmh-0.18-pre4.
1343 * Check if we have enough message status space, before we
1344 call folder_realloc() in burst, mhpath, and m_draft().
1346 * mhn will now correctly identify a formatting string of "-"
1347 for the option -store, and send content to stdout.
1349 * Change the way that memory for message status is
1350 allocated. It is dynamcially allocated separately from
1351 the folder/message structure. This required changing
1352 folder_read.c, folder_realloc.c, folder_free.c.
1354 * Removed all the MTR code (experimental code for message
1357 * Renamed m_readfolder.c to folder_read.c and simplified
1360 * Renamed m_freefolder.c to folder_free.c.
1362 * Add function trim() to slocal.c to pretty print
1363 the debugging output.
1365 * Changed the name of m_packfolder() to folder_pack().
1366 Changed the name of m_remsg() to folder_realloc().
1368 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1370 * Released nmh-0.18-pre3.
1372 * Changed installation to add `flists' which is hard linked
1373 to `flist'. This is a equivalent to `flist -all'.
1375 * For flist, -showzero is on by default.
1377 * Major changes to flist. Default is now for flist to search
1378 current folder. The switch `-all' is now used to specify
1379 searching all top level folders. The new switch `-showzero'
1380 is used to print out folders that don't contain any messages
1381 in the given sequence.
1383 * Split BuildFolderList in flist.c into 2 functions
1384 (BuildFolderList, BuildFolderListR). Changed these functions
1385 so that flist now does better leaf optimization, and will stop
1386 stat'ing directory entries when it knows it has hit all the
1387 subdirectories of a given directory.
1389 * Reorganized code in folder.c, so that all relevant folders
1390 are scanned first and information recorded. Then all the
1391 folder summaries at printed out at one time.
1393 * Made the options of folder(s) more orthogonal. Now
1394 "folder -all -noheader -nototal" will do the right thing.
1396 * Added `-noall' switch to folder, for completeness.
1398 * Changed the default mode for creation of new folders
1401 * Slightly changed the format for flist. It now indicates
1402 if a folder is current. Also the width of the various
1403 fields are now calculated at runtime.
1405 * Changed the format for folder(s). Folder names
1406 are now left justified. The width of the various fields
1407 are calculated at runtime.
1409 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1411 * Released nmh-0.18-pre2.
1413 * Add paragraph to man page for install-mh and to INSTALL file
1414 about checking for global mh.profile.
1416 * Renamed m_find() to context_find().
1417 Renamed m_replace() to context_replace().
1418 Renamed m_delete() to context_del().
1419 Renamed m_update() to context_save().
1420 Renamed m_getdefs() to context_read().
1421 Renamed m_foil() to context_foil().
1423 * Change rcvstore to use routine folder_addmsg(), instead of
1424 adding message to folder itself.
1426 * Changed refile, so that if the switch -preserve is used,
1427 and a conflict occurs for a particular folder, then folder_addmsg()
1428 will just use next highest available number for that folder,
1431 * Make folder_addmsg() more robust. It will make repeated
1432 attempts to link file into folder if link returns with
1435 * Fix bug, so that that if forking sendmail, HELO will be sent
1436 unless clientname: option is defined but empty (so now it
1437 is the same as the direct smtp code).
1439 * Changed sprintb to snprintb (now we pass the buffer length
1440 to new routine). Changed code to use new function.
1442 * Added snprintf to sbr. Added configure check to build it
1443 if you don't have a native version (but haven't changed much
1444 code to use it yet).
1446 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1448 * Released nmh-0.18-pre1.
1450 * Fixed alarm bug in slocal, so that alarm is never
1451 called with a value larger than 30 mintues.
1453 * Fixed race condition in rmm and refile, so that
1454 context is updated before external rmmproc is called.
1456 * Removed all the OVERHEAD code.
1458 * Move code to add message to folder from refile.c
1461 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1463 * Did some rearranging of the internals of inc.c.
1465 * Make -inplace the default for anno, forw, dist, and repl.
1467 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1469 * Created new directory mts/sendmail for direct sendmail
1470 interface (although it currently still uses SMTP).
1472 * Removed all the TMA (trusted mail agent) code
1474 * Removed all the TTYD (terminal access daemon) code
1476 * Removed all the MF (uucp filtering) code.
1478 * Removed all the code for BERK.
1480 * Removed all the code for stand-alone delivery (MHMTS).
1482 * Split the file mts/sendmail/smail.c into sendmail.c and
1483 smtp.c. Changed the name of the directory to mts/smtp.
1485 * Changed autoconf to use @sysconfdir@ for location of
1486 configuration files.
1488 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1490 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1492 * Released nmh-0.17.
1494 * MAKEDEFS weren't passed down to recursive makes correctly.
1496 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1497 of hard-coding "/etc/utmp".
1499 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1502 * Remove configure checks for ulong and ushort. Changed
1503 code to just use unsigned {short, long}.
1505 * Change addmsg function in refile.c to return new
1506 number of refiled message.
1508 * Added check in get_returnpath for empty unixbuf.
1510 * Cleanup of sbr/pidstatus to use more POSIX macros
1511 for return value of wait().
1513 * Change configure to also check /bin for "more".
1515 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1517 * Released nmh-0.16.
1519 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1521 * Added automimeproc, which should replace automhnproc.
1523 * multipart messages will no longer abort for messages
1524 of type 8bit or binary (although we still can't really
1525 deal with binary messages, yet).
1527 * Fix double free of c_storage. From John MacMillan.
1529 * mhn now treats unknown subtypes of "text" as text/plain.
1531 * mhn changed so that specifying mhn-show-multipart, or
1532 mhn-show-multipart/{mixed, alternate, etc...) will override
1533 the use of the internal method for displaying these types.
1534 Previously mhn would always use the internal method for subtypes
1535 mixed, alternate, digest, and parallel (even if an alternate
1536 method was specified in mhn.defaults).
1538 * mhn show treats unknown subtypes of multipart, as type
1539 multipart/mixed (as specified RFC2046).
1541 * mhn checks for the parameter "name" rather than "x-name".
1542 From MH-6.8.4 patch.
1544 * Fix double free of ctinfo in user_content when using
1545 #forw with single message. From John MacMillan (and
1548 * Changed -mhnproc switch for show, to -showmimeproc.
1550 * Changed profile entry "mhnproc" to "showmimeproc".
1552 * Added "mime" option to "whatnow", which calls the program
1553 "buildmimeproc" (default is mhn -build) to process MIME
1556 * Added -build switch to mhn, to process MIME composition
1559 * Did some reorganizing of mhn.c.
1561 * Changed casting in mts/sendmail/smail.c from (char) to
1562 (signed char) so SMTP reply codes work correctly for machines
1563 which used unsigned chars by default.
1565 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1567 * Released nmh-0.15.
1569 * Added new form "scan.unseen" to distribution. It marks messages
1570 which are in any sequence in Unseen-Sequence.
1572 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1574 * Fix sign extension bugs in fmt_scan.c.
1576 * Fix m_atoi.c so that strings ending in non-digit characters
1579 * Split code in burst.c so that finding delimiters of digested
1580 messages and bursting a message into multiple messages are
1581 two separate functions (find_delim and burst).
1583 * Add workaround fo AC_PATH_PROG in configure.in, so
1584 that BSD4.4 machines can find sendmail, vi, more.
1586 * Added "-width" option to rcvtty.
1588 * Change a few variable names in zotnet/mts/client.c since
1589 they conflict with defines on AIX.
1591 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1592 unsuccessful if resulting file is less than 500 lines long
1593 (rather than 10, which was previous value), since AIX
1594 sed gives mangled file of about 200 lines.
1596 * Extract code in rcvstore.c to link message into folder,
1597 and put in own subroutine.
1599 * Extract code in refile.c to link message into folder,
1600 and put in own subroutine.
1602 * Moved code to remove messages from folder into own
1603 routine "folder_delmsgs" in sbr. Changed rmm.c and
1604 refile.c to use new routine.
1606 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1608 * Renamed m_seqok to seq_nameok.
1610 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1613 * Changed m_seqflag to return the number of a sequence rather
1614 than its bit flag. Changed its name to seq_getnum and renamed
1615 file to sbr/seq_getnum.c.
1617 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1620 * Added zero switch to m_seqadd function to zero out bits before
1621 adding message to sequence.
1623 * Renamed function m_setvis to m_setunseen, and renamed
1624 corresponding file in sbr.
1626 * Renamed function m_setseq to m_setprev, and renamed corresponding
1629 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1631 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1632 all selected messages from a sequence.
1634 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1635 selected messages to a sequence.
1637 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1640 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1642 * Renamed function pack_folder to m_packfolder, and moved it
1643 from uip/folder.c into its own file sbr/m_packfolder.c
1645 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1647 * Changed function m_gmsg to m_readfolder. Renamed file
1648 sbr/m_gmsg.c to sbr/m_readfolder.c.
1650 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1652 * Expanded rcvtty man page, and added small patch from
1653 MH-6.8.4 distribution.
1655 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1657 * Released nmh-0.14.
1659 * Comment out configure test and code for tgetent to allocate its
1660 own termcap buffer when passed a NULL argument.
1662 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1664 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1665 to show. Restructured code to handle options to various
1666 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1667 environment variable.
1669 * Added new man page `mh-draft' which documents the
1670 draft folder facility in nmh.
1672 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1675 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1676 fmtcompile.c to fmt_compile.c, and formataddr.c to
1679 * `send -help' wasn't showing the -(no)mime and -split
1682 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1684 * Released nmh-0.13.
1686 * Changed mhpath so it doesn't abort if a message sequence
1687 such as "mhpath all" expands to more than 1000 messages.
1688 Also mhpath now dynamically reallocated space for message
1689 names (The number of command line arguments is still limited
1692 * Did some general restructuring of the code in folder.c
1693 that checks for folder information, and prints it.
1695 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1697 * Changed `folder' to reallocate space for folder names if
1698 necessary. So `folders' can now handle more than 300 folders.
1700 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1702 * Change configure to use a compile check to see if the tm struct
1703 has tm_gmtoff, rather than using egrep.
1705 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1707 * Released nmh-0.12.
1709 * Had set_exists and unset_exists macros backwards.
1711 * Released nmh-0.11.
1713 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1715 * Added documentation to mh-profile.man about the various
1716 `procs' (mhlproc, showproc, lproc, etc...).
1718 * Replace the bit twiddling for SELECTED, UNSEEN, and
1719 mp->attrstats with macros.
1721 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1724 * Change fstat to stat in m_gmsg.c since Linux wants
1727 * Merge Linux patch sent in by Michel Oosterhof (original
1728 patch from bsa@kf8nh.wariat.org).
1730 * Document an undocumented MH feature. mhn -form mhl.null
1731 will suppress the display of the message header.
1733 * mhparam will now return "mhparam etcdir".
1735 * Add catproc to /config/config.c and use that in show.c
1736 and mshcmds.c, rather than hard coding in /bin/cat.
1738 * Add mhnproc to the list of `procs' in mh-profile.man.
1740 * Add configure test for lorder and tsort commands.
1742 * Commented out the padding in the `msgs` struct in h/mh.h
1744 * Change m_gmsg.c to allocate elements to the `info' array by
1745 500 elements at a time (rather than MAXFOLDERS / 5).
1747 * Add note to man page for mhmail that zero length messages are
1748 not sent. Need to use -body "" to send empty messages.
1750 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1752 * sbr/getcpy.c : assign '\0' to character, not NULL.
1754 * add m_fmsg to most programs in uip so that they explicitly free
1755 folder/message structure when done with folder.
1757 * uip/slocal.c : cleanup processing of sender. Make sure it is
1758 defined even if message is missing "From " line.
1760 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1762 * Released nmh-0.10.
1764 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1766 * Add configure check for <locale.h>. Turn on LOCALE support
1769 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1771 * Reversed previous decision to retain "From " lines in slocal.
1772 The "From " line is now removed from all messages.
1774 * inc now saves the date from the "From " envelope in the
1775 Delivery-Date header for all messages.
1777 * sbr/m_getfld.c: Clean up processing of Return-Path and
1778 Delivery-Date from the "From " envelope.
1780 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1782 * client.c: cast iaddr to int before comparing return value
1783 of inet_addr with NOTOK.
1785 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1787 * Grep test for signal names was failing on some OS'es because
1788 of missing tabs in regex.
1790 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1792 * Released nmh-0.09.
1794 * Move config files and format files to *.old before installing.
1796 * Add configure check for killpg.
1798 * msh.c: include <termios.h> instead of <termio.h> and
1801 * prompter.c: don't include <sys/ioctl.h> anymore.
1803 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1805 * Added `-mime' and `-nomime' options to `repl'.
1808 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1810 * ruserpass.c : removed conflicting prototypes.
1812 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1813 by `mesg' command. Previously only worked on BSD machines.
1815 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1817 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1818 than hard coded "/etc/utmp".
1820 * Released nmh-0.08.
1822 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1823 when accessing ndbm/db file for duplicate suppression, instead of
1824 locking database itself.
1826 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1828 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1830 * Changed the slocal actions `file' and `>' to always deliver in
1831 mbox (uucp) format rather than be determined by RPATHS config
1834 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1835 rather than mmdf format.
1837 * slocal now adds Delivery-Date field to all messages (previously it
1838 only added it to messages when delivering them to a file). The
1839 "From " line is now retained on all messages if compiling with
1840 RPATHS, rather than being discarded.
1842 * rcvpack no longer adds the Delivery-Date field to messages.
1844 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1846 * Removed the script packmbox, since it's functionality has been
1849 * Changed packf so that it uses mbox (uucp) format by default
1850 rather than mmdf format. Added options -mbox and -mmdf to
1851 packf so you can choose the preferred format.
1853 * Changed rcvpack so that it uses mbox (uucp) format by default
1854 rather than mmdf format. Added options -mbox and -mmdf to
1855 rcvpack so you can choose the preferred format.
1857 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1859 * Changed nmh to use dot locking by default (although you
1860 can still easily change this in config.h).
1862 * Simplified locking code. Removed code allowing setting of
1863 locking type in mts.conf. Now the locking type and locking
1864 directory (if any) can only be set at compile time.
1866 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1868 * Prefer getting timezone information from tm->gmtoff rather
1869 than tzset and external timezone variable.
1871 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1873 * Fixed typo in ruserpass.c in the variable toktabs.
1875 * When ruserpass was added to LIBOBJS, it was missing
1878 * Released nmh-0.07.
1880 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1882 * Add check to configure, so that if ruserpass, or _ruserpass
1883 is not found, build version of ruserpass in sbr.
1885 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1886 the code that manipulates internals of stdio, will build
1889 * Added #define to control whether to compile the simple
1890 built-in FTP client in mhn.
1892 * Added configure check for ushort and ulong. Change code
1893 to use ushort/ulong rather than u_short/u_long.
1895 * A couple of small cleanups in locking code.
1897 * Added configure check for gmtoff element in struct tm.
1899 * Added configure check for tzset.
1901 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1903 * Released nmh-0.06.
1905 * Removed code for machines that don't have socket
1906 interface (how could they get mail anyway?).
1908 * Removed code for BSD41 machines. I don't think there are
1909 many such machines around anymore.
1911 * Add configure check for function uname, and prefer it
1912 over gethostname. General cleanup of zotnet/mts/mts.c.
1914 * Change all `lseek' calls to use POSIX symbolic constants
1915 SEEK_SET, SEEK_CUR, SEEK_END.
1917 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1919 * Check lex generated file in zotnet/tws and use
1920 pre-generated version if necessary.
1922 * Released nmh-0.05.
1924 * Change to use reliable signals on all platforms that have
1925 sigaction. Change so that interrupted system calls are
1926 restarted for all signals except SIGALRM. This fixes alarm
1927 handling code in smail.c for BSD based systems.
1929 * Added lorder and tsort commands so that created libs can
1930 be linked in one pass.
1932 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1934 * Changed pidwait so that while it is waiting for a child,
1935 it should block signals rather than ignore them.
1937 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1939 * Add checks to configure for dbm_open and -lndbm.
1941 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1943 * folder -pop and folder -push were freeing some memory too
1944 quickly, which caused the entry popped from the stack to not
1945 become the current folder.
1947 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1949 * Released nmh-0.04.
1951 * Define ospeed and PC in termsbr.c is OS doesn't have
1954 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1956 * editfile will create a symbolic link to the altmsg if it
1957 can't make a link, on any machine supporting lstat. Formerly
1958 this would happen only on BSD42 based machines.
1960 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1962 * traverse (in popsbr.c) wasn't calling va_start before using
1963 variable argument list. Fixes core dump in inc when using POP.
1965 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1967 * The variable pass in remotemail needed to be set to
1968 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1971 * inc and msgchk were using -rpop by default when configured
1972 with POP support. Default is now -norpop.
1974 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1976 * By default, post will now give the SMTP HELO command with
1977 the local hostname. If you specify a hostname with the
1978 clientname: option in mts.conf file, post will give the
1979 HELO command with that name instead. If the argument to the
1980 clientname: option is empty, no HELO command is given.
1981 (From the MH-6.8.4 diff)
1983 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1985 * When using `-help' for a command, it will also print its
1986 profile compents from .mh_profile. (From MH-6.8.4 diff)
1988 * "slocal -file" will now correctly takes its input from
1989 a file (currently need to specify full path).
1991 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1993 * "slocal -debug" will now issue a warning if a non-blank
1994 line in the .maildelivery file has less than 5 fields.
1996 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1998 * Changed slocal so that code for duplicate suppression
1999 (MH config was MSGID) is always built. Added the options
2000 -[no]suppressdup to slocal to turn this on/off.
2002 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2004 * Released nmh-0.03.
2006 * Fixed problem where mark would core dump if no
2007 .mh_sequence file existed.
2009 * Fixed problem where slocal would core dump if -debug
2010 option was given, and certain headers were missing.
2012 * Added patch to slocal to add `folder' (+) action, which
2013 is shorthand for piping message to rcvstore. Updated
2016 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2018 * Changed flist option -unseen to -[no]all. Cleaned up
2021 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2023 * Fixed flist. Changed the profile component `Folder-Order'
2024 to `Flist-Order. Added option `-sequence' to flist, so
2025 you can specify the name of the sequence to search for.
2027 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2029 * A few minor portability cleanups. Changed to use PATH_MAX
2030 rather than MAXPATHLEN. Don't assume ospeed variable exists
2031 in termsbr.c. Removed some conflicting prototypes.
2033 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2035 * Add configure test to check if tgetent will accept NULL
2036 and allocate its own buffer. Borrowed from zsh.
2038 * Changed libpath to etcpath.
2040 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2042 * Cleaned up source code and Makefiles, so that if your `make'
2043 supports the VPATH option, you can build nmh in a different
2044 directory from where the source code is located.
2046 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2048 * Released nmh-0.02.
2050 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2052 * Split mhook man page into man pages for rcvdist, rcvpack,
2055 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2057 * Changed code to use strerror, rather than using sys_errlist
2058 and sys_nerr directly.
2060 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2062 * -compat switch from install-mh removed.
2064 * Changed the default POP port from "pop" to "pop3".
2066 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2068 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2069 (again) to mhn.defaults.sh. Changed find_program (again) to
2070 mhn.find.sh. mhn.defaults.sh now takes the search path
2071 as an argument. Default search path is now specified in Makefile
2072 rather than in script.
2074 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2076 * Changed mtstailor file to mts.conf. Updated man pages.
2078 * Changed si_value to si_val in mhn.c, since it conflicts with
2079 macro defined on Solaris.
2081 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2083 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2084 support for Emacs front-end mhe. It is on by default.
2086 * Added the following configure options: --enable-nmh-pop to
2087 enable client side pop support, --enable-nmh-smtp to enable
2088 SMTP support. Client-side pop support now compiles. Man
2089 pages for inc, msgchk, mh-chart now correctly added pop
2092 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2094 * Added configure test for bug in C libraries where linker
2095 can't find ruserpass, but can find _ruserpass.
2097 * Fixed configure test so that termcap variable ospeed is
2100 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2102 * Source files converted to ANSI C.
2104 * md5 now compiled separately rather than being included
2105 in mhn.c. Changed md5 to use memset and memcpy.
2107 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2109 * Collected the error routines adios, advise, admonish, and advertise
2110 into one file (error.c), and did some rearranging of the code.
2112 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2114 * Added awk script sigmsg.awk (originally written by
2115 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2116 automatically generate signal messages for pidstatus.c.
2117 Added files sbr/signals.c, h/signals.h. Code now uses
2118 sigprocmask to block signals (if available). Code now uses
2119 signal blocking on non-BSD machines.
2121 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2123 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2125 * Released nmh-0.01.
2127 * Added configure code to check for type of signals functions
2128 you have (POSIX or BSD style signals). Added function
2129 SIGPROCMASK to simulate sigprocmask on machines that don't
2132 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2134 * Added -version switch to all commands. Also added to
2137 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2139 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2140 POSIX termios.h style functions if present.
2142 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2144 * Changed support/general/bootmhn.sh to output new mhn_defaults
2145 file to standard output by default (makes it easier for testing).
2146 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2147 script to find_program.
2149 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2151 * Added patch to uip/folder.c from exmh distribution to
2152 speed up -recurse option.
2154 * Added flist command from exmh distribution. It doesn't work
2155 yet, but it compiles :-)
2157 * Changed default location for install to
2158 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2159 and configuration files go in nmh/etc, and support binaries go
2160 in nmh/lib. Of course, all this can now be changed in the top
2163 * Started with mh-6.8.3 as based and converted to autoconf.
2164 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2165 Pop support and plenty of other things, are now broken.
projects / mmh / blob