1 2008-08-04 Eric Gillespie <epg@pretzelnet.org>
3 * uip/folder.c: Simplify dodir/addir/addfold. Dump hacky
4 over-optimization in addir that tried to avoid readdir after all
5 child directories had been read; this was also trying to support
6 symlinks to directories, but would have been failing (because
7 nlink may have gone to 0 with symlinks to directories remaining)
8 had the lstat usage been correct (lstat doesn't fail for normal
9 directories; should have used S_ISLNK).
11 2008-08-03 Peter Maydell <pmaydell@chiark.greenend.org.uk>
13 * test/setup-test: use 'set -e' so we stop on compile failure.
14 Configure --enable-debug for convenience in debugging.
16 * uip/whatnowsbr.c: bug #23319: rework the way we handle the working
17 directory when invoking the user's shell, so that we don't have
18 issues when the cwd contains a space or shell special character.
19 * test/tests/whatnow/test-attach-detach, test/tests/whatnow/test-cd,
20 test/tests/whatnow/test-ls: test cases for this.
22 * sbr/fmt_compile.c: add 'do { ... } while (0)' wrappers
23 to various multi-statement macros to avoid nasty surprises
24 if the macros are used in if() clauses.
26 * bug #23436: man/scan.man, man/forw.man, man/inc.man,
27 man/mh-chart.man, man/mhmail.man, man/mhshow.man,
28 man/mhstore.man, man/msgchk.man, man/packf.man, man/scan.man:
29 fix minor syntax errors groff warns about.
30 * test/runtest, test/README: allow test cases to report
31 that they have been SKIPped as well as PASS/FAIL
32 * test/tests/manpages/test-manpages - new test which runs groff
33 on the manpages and checks that there are no warnings.
34 * test/runalltests: ignore editor backup files
36 2008-08-03 Eric Gillespie <epg@pretzelnet.org>
38 * etc/replcomps, etc/replgroupcomps: Trim trailing whitespace from
41 2008-08-03 Peter Maydell <pmaydell@chiark.greenend.org.uk>
43 * sbr/fmt_compile.c: when doing an if-test on the result
44 of a function which returns a string result, check whether
45 the string is non-empty (as the documentation says we do).
46 Previously we were always testing the integer 'value'. Bug
47 spotted by Eric Gillespie.
48 * test/tests/repl/test-if-str: test case for this bug
50 2008-07-24 Eric Gillespie <epg@pretzelnet.org>
52 * test/setup-test: Run 'make clean' before building
54 2008-07-24 Eric Gillespie <epg@pretzelnet.org>
56 * test/runtest: cat test-temp-dir only once. Destroy and create
57 test Mail hierarchy here, so each test has its own independent
60 * test/setup-test: Drop needless pushd/popd, which don't exist in
61 sh anyway. Don't use aclocal, which is part of automake.
62 Don't create Mail hierarchy here (see test/runtest).
64 * test/tests/folder/test-create, tests/folder/test-total: Drop
67 * tests/pick/test-pick: Remove failing no-op test.
69 * test/tests/scan/test-scan: Write expected and actual output to
70 files and diff them. This way, if the output differs, diff
71 provides the FAILing exit code and shows the differences.
73 2008-06-12 Josh Bressers <josh@bress.net>
74 * man/repl.man, etc/mhl.reply:
75 Add an attribution line when replying to messages.
77 2008-06-02 Peter Maydell <pmaydell@chiark.greenend.org.uk>
79 * h/mh.h, h/prototypes.h, sbr/done.c, uip/inc.c,
80 uip/mhbuild.c, uip/mhlist.c, uip/mhn.c, uip/mhshow.c,
81 uip/mhstore.c, uip/mhtest.c, uip/packf.c, uip/pick.c,
82 uip/rcvdist.c, uip/rcvstore.c, uip/sendsbr.c: when
83 building on gcc, use the noreturn attribute on various
84 functions (should improve code and avoid some spurious
85 'uninitialized variable' warnings).
87 2008-06-01 Peter Maydell <pmaydell@chiark.greenend.org.uk>
89 * docs/README.developers: update the bits about doing a
90 release announcement, now I've actually done one.
92 2008-05-22 Peter Maydell <pmaydell@chiark.greenend.org.uk>
94 * uip/scansbr.c: don't use MB_CUR_MAX if we aren't compiled
95 with multibyte support.
97 * uip/whatnowsbr.c: factor out common code for writing ls
98 shell command, and make it do more sensible buffer length
99 checks. Also avoid relying on the return value of sprintf(),
100 as some old systems don't return number of characters written.
102 2008-05-21 Peter Maydell <pmaydell@chiark.greenend.org.uk>
104 * sbr/utils.c (mh_xrealloc): don't assume realloc() can
105 handle NULL pointers; some non-POSIX realloc()s can't.
107 * sbr/dtimep.lex: add some table size declarations for the
108 benefit of elderly lexes with small defaults.
110 2008-05-18 David Levine <levinedl@acm.org>
112 * sbr/addrsbr.c: removed "err" from conditional, because gcc
113 correctly warned that it would always evaluate as true. It's
114 the address of a static array.
116 2008-05-16 Oliver Kiddle <okiddle@yahoo.co.uk>
118 * sbr/Makefile.in, config/Makefile.in: Don't use $< in target rules
119 in makefiles, as POSIX says it's only defined in inference rules.
121 2008-05-13 David Levine <levinedl@acm.org>
123 * configure.in, INSTALL: if --enable-masquerade is not
124 specified to configure, enable all supported masquerade forms.
125 This allows users to masquerade with the default
126 configuration. That seems to be more worthwhile now than
127 trying to prevent users from using it, especially with
128 single-user installations or those where a user can edit
131 2008-05-04 Peter Maydell <pmaydell@chiark.greenend.org.uk>
133 * bug #23167: sbr/ruserpass.c (ruserpass): make bad permissions
134 on .netrc be an instantly fatal error. Previously we returned
135 an error value; however, no caller was checking it. So now
136 ruserpass() has a void return type.
138 * bug #23163: various minor fixes for the benefit of
139 older Unixes (specifically SunOS 4):
140 reintroduce strerror() substitute implementation
141 provide memmove() substitute implementation
143 * bug #23163: fix accidentally broken 'build outside
144 source directory' feature
146 * bug #23162: sbr/dtime.c: fix stray HAVE_TM_GMTOFF that
147 wasn't updated to the new macro name.
149 2008-04-30 Peter Maydell <pmaydell@chiark.greenend.org.uk>
151 * mts/smtp/smtp.c: provide a callback for SASL_CB_AUTHNAME
152 (fixes issue with SASL sending the wrong username in some
153 circumstances). Thanks to <der_wachtmeister@freenet.de>
156 2008-04-29 Peter Maydell <pmaydell@chiark.greenend.org.uk>
158 * Revert previous attempt at fix for SASL issue as it
159 is the wrong approach.
161 * Fix in correct manner, by making sm_rrecord() and thus
162 sm_hear() set the length of the reply string correctly
163 (the SASL libraries now care if you pass in the wrong
166 * Correct various places in smtp.c where the reply string
167 might not have been correctly NUL-terminated. Includes a
168 fix for a particularly nasty and long standing screwup
169 where the buffer length counting in smhear() was totally
170 broken for continued lines from the server.
172 2008-04-29 Peter Maydell <pmaydell@chiark.greenend.org.uk>
174 * Cope with sasl_decode64() returning SASL_CONTINUE, as
175 happens with newer sasl libraries and LOGIN auth.
177 2008-04-27 Peter Maydell <pmaydell@chiark.greenend.org.uk>
179 * Updated some of the 'how to do a release' documentation.
181 * Upped the VERSION string to '1.3-dev', since 1.3-RC1 has
184 2008-04-27 Peter Maydell <pmaydell@chiark.greenend.org.uk>
186 * Released nmh-1.3 RC1.
188 2008-04-11 Oliver Kiddle <okiddle@yahoo.co.uk>
190 * acconfig.h, configure.in, sbr/dtime.c, sbr/pidwait.c,
191 uip/mhshowsbr.c, uip/rcvtty.c, uip/slocal.c, uip/termsbr.c:
192 move most remaining macros out of acconfig.h which is an
193 obsolete feature of autoconf
195 2008-04-05 Peter Maydell <pmaydell@chiark.greenend.org.uk>
197 * bug #18655: fix use of admonish() for a fatal error (should
198 be adios(); only actual effect would be wrong exit code).
199 Thanks to Craig Leres for spotting this.
201 2008-04-05 Peter Maydell <pmaydell@chiark.greenend.org.uk>
203 * bug #20028 (Debian bug 399271): fix code assuming that pointer
204 differences were 32 bits -- thanks to Dean Gaudet for the patch.
206 2008-01-25 Josh Bressers <josh@bress.net>
208 * uip/mhshowsbr.c (show_all_messages): Be more generous when parsing
211 2007-11-04 Joel Reicher <joel@panacea.null.org>
213 * Changed done() link overriding to function pointer. Return type
214 is now void so that exit() can be used as done() callback. Dead
215 code return from all done()s removed, with return 1 in main()
216 following done() (should never be reached).
218 2007-08-21 Josh Bressers <josh@bress.net>
220 * Red Hat Bug #253342: inc.c, utils.c, utils.h: When inc is run with
221 the -silent flag, don't exit(1) for no apparent reason.
223 2007-03-12 Peter Maydell <pmaydell@chiark.greenend.org.uk>
225 * bug #18630, #18631, #18632, #18634: various patches from
226 Craig Leres fixing error message argument problems.
228 2007-03-12 Peter Maydell <pmaydell@chiark.greenend.org.uk>
230 * bug #15212: configure.in, acconfig.h: remove configure test for
231 broken AT&T vi. This test was broken (it was always returning
232 failure even for non-broken vi implementations) and
233 unfixable. Nobody should be using AT&T vi any more so I have
234 simply moved it back to being a setting you can put manually into
235 acconfig.h if you must.
237 2006-10-24 David Levine <levinedl@acm.org>
239 * uip/sendsbr.c: with attachformat values of 1 or 2, add
240 name= portion to Content-Type header. This makes them
241 consistent with attachformat value 0. And it allows mhstore
242 to use that (file)name when extracting attachments.
244 2006-08-26 Josh Bressers <josh@bress.net>
246 * configure.in: If we're not using dotlocking, there is no need to set
249 2006-03-30 David Levine <levinedl@acm.org>
251 * uip/sendsbr.c: with attachformat values of 1 or 2, only
252 generate Content-Disposition headers for MIME attachments, not
253 for the message contents themselves. Microsoft Outlook Build
254 10.0.6626, at least, doesn't show the message contents if they
255 have Content-Disposition.
257 2006-03-09 Josh Bressers <josh@bress.net>
259 * sbr/fmt_rfc2047.c (decode_rfc2047): Don't close the iconv descriptor
262 2006-03-08 Josh Bressers <josh@bress.net>
264 * (mh_strcasecmp): Rename the private strcasecmp function to
265 mh_strcasecmp. This keeps the newer gnu linker happy.
267 2006-03-05 Oliver Kiddle <okiddle@yahoo.co.uk>
269 * sbr/fmt_rfc2047.c: don't try to malloc 0 bytes if an RFC2047
270 encoded block is empty
272 2006-03-04 Peter Maydell <pmaydell@chiark.greenend.org.uk>
274 * etc/Makefile.in: use INSTALL_SCRIPT to install scripts;
275 this allows INSTALL_PROGRAM to be set to 'install -s' so
276 binaries are stripped on installation. Apparently the BSDs
279 2006-02-25 David Levine <levinedl@acm.org>
281 * uip/sendsbr.c: replaced st_mtim with st_mtime, that's what
282 it should have been. Added #include of h/tws.h to pick up
285 2006-02-20 David Levine <levinedl@acm.org>
287 * h/mh.h, h/prototypes.h, uip/mhbuildsbr.c, uip/send.c,
288 uip/sendsbr.c, uip/viamail.c, uip/whatnowsbr.c, man/send.man:
289 added -attachformat switch to send, to support alternate MIME
290 header contents when using -attach. See send man page for
293 * man/mhbuild.man: wrapped one appearance of "Content-Disposition"
294 with quotes, to be consistent with others.
296 2006-02-20 Josh Bressers <josh@bress.net>
298 * h/utils.h, sbr/utils.c, uip/flist.c, uip/folder.c: Move duplicate
299 function num_digits into utils.c
301 2006-02-19 Josh Bressers <josh@bress.net>
303 * sbr/m_draft.c, sbr/utils.c, uip/folder.c, uip/inc.c,
304 uip/mhstoresbr.c, uip/popi.c, uip/refile.c: Add create_folder()
305 function, replacing duplicate code during folder creation.
307 2006-02-18 David Levine <levinedl@acm.org>
309 * h/mime.h, h/mhparse.h, uip/mhbuildsbr.c, uip/mhfree.c,
310 man/mhbuild.man, docs/TODO: added support for an optional
311 Content-Disposition header in mhbuild (only). Its contents
312 are supplied between {}, positioned after the optional [], in
313 a mhbuild directive. If the contents do not contain a
314 "filename=" parameter, and the directive has a filename, or
315 something else that ends with "name=", then that will be used
316 to add a "filename=" parameter to the header.
318 2006-02-12 David Levine <levinedl@acm.org>
320 * docs/TODO: added RFC2183 to reference of RFC1806 for
321 Content-Disposition header.
323 2006-01-31 David Levine <levinedl@acm.org>
325 * uip/mhbuild.c, uip/mhbuildsbr.c, man/mhbuild.man: added
326 -nocontentid switch, to disable generation of Content-ID:
327 header in MIME messages. (Also added -contentid for
328 symmetry.) The default configuration of Microsoft Outlook,
329 Build 10.0.3416 in particular, doesn't see attachments in
330 incoming messages if there are Content-ID headers, see
331 http://home.cwru.edu/~wrv/eudoraoutlookfix.html. This allows
332 users to easily accomodate that by adding
333 mhbuild: -nocontentid to their .mh_profile.
335 2006-01-29 Oliver Kiddle <okiddle@yahoo.co.uk>
337 * bug 4360: uip/replsbr.c: remove trailing newlines from components
338 to fix bug with spaces at the end of Subject/References in replies
340 2006-01-18 Oliver Kiddle <okiddle@yahoo.co.uk>
342 * configure.in: use AS_HELP_STRING for formatting help messages
344 * configure.in, sbr/fmt_scan.c: add autoconf magic to support
345 old systems that don't support multibyte character sets
347 * sbr/fmt_scan.c: fix bug with insertion of newline being wrong if
348 the num function was used at the end of the format buffer
350 2006-01-17 David Levine <levinedl@acm.org>
352 * uip/post.c, uip/spost.c: in make_bcc_file (), use same
353 logic as in finish_headers () to detect whether there is an
354 existing From: line in the draft. If draft_from masquerade
355 flag is enabled, this allows the From: to be obeyed in the
356 Bcc, instead of the old behavior of always replacing it with
359 2006-01-17 Oliver Kiddle <okiddle@yahoo.co.uk>
361 * sbr/fmt_scan.c: more robust multi-byte/column support for field
362 widths, restoring right justification feature
364 2006-01-16 Oliver Kiddle <okiddle@yahoo.co.uk>
366 * h/aliasbr.h, h/rcvmail.h, man/Makefile.in, man/slocal.man,
367 sbr/lock_file.c, uip/aliasbr.c, uip/dropsbr.c, uip/post.c,
368 uip/slocal.c, man/mh-mts.man: remove remnants of code for MMDF
370 * uip/scansbr.c: multiply buffer size by MB_CUR_MAX so multi-byte
373 2006-01-14 Josh Bressers <josh@bress.net>
375 * sbr/fmt_scan.c: Turn the PUTSF macro into a function capable of
376 handling multi column characters.
378 2006-01-07 Josh Bressers <josh@bress.net>
380 * Remove sbr/strerror.c -- strerror(3) is defined in C89.
382 2006-01-06 Josh Bressers <josh@bress.net>
384 * patch #3968: Move the add() function from its own file (add.c) and
385 into utils.c. There was also a duplicate add() function in mf.c which
388 2006-01-02 Josh Bressers <josh@bress.net>
390 * Remove sbr/pwd.c file, moving the pwd() function into sbr/utils.c.
392 2006-01-01 Josh Bressers <josh@bress.net>
394 * patch #3967: Create a mh_xrealloc function to prevent mistakes when
397 2006-01-01 Josh Bressers <josh@bress.net>
399 * patch #3966: Create a mh_xmalloc function to prevent mistakes when
402 2005-12-24 Peter Maydell <pmaydell@chiark.greenend.org.uk>
404 * Bug #15285: Don't use $< in target rules in makefiles, as POSIX
405 says it's only defined in inference rules. (BSD make was expanding
406 $< to the empty string in the rule for building sbr/dtimep.c, which
407 causes lex to apparently hang because it's reading from stdin.)
409 2005-12-24 Peter Maydell <pmaydell@chiark.greenend.org.uk>
411 * Completely redo db library checking -- we now check for working
412 (include file, library) pairs rather than checking for headers and
413 libraries separately. We also now provide --with-ndbm=lib and
414 --with-ndbmheader=header options to configure to handle situations
415 where configure's autodetection fails.
417 2005-12-21 Peter Maydell <pmaydell@chiark.greenend.org.uk>
419 * Fix stupid accidental dependence on a bash quirk in previous
420 configure script change.
422 2005-12-15 Peter Maydell <pmaydell@chiark.greenend.org.uk>
424 * Improve checking for Berkeley db libraries: configure should now
425 find a suitable library on systems with new gdbm where
426 compatibility functions are in the gdbm_compat library, and on
429 2005-12-13 Michael Forrest <mef@computer.org>
431 * Fedora Bug #163760: sbr/context_read.c (context_read): Ensure that
432 the context is only read once.
434 2005-12-12 Josh Bressers <josh@bress.net>
436 * uip/sendsbr.c (annoaux): Fix the call to annotate() fixing a bug
437 which prevented repl from properly annotating messages.
439 2005-12-07 Jon Steinhart <nmh@fourwinds.com>
441 * Fixed a bug where anno -append put the headers in the wrong place
442 if applied to a message that didn't contain any headers.
444 * Added a special value of "all" to the -number option that causes
445 anno -delete to delete all matching components instead of just
448 * Added new -preserve and -nopreserve options. Using -preserve
449 retains the original last accessed and last modified times on
452 2005-12-05 Josh Bressers <josh@bress.net>
454 * Fedora Bug #174983: configure.in: Fix the AC_PATH_PROG default when
455 vi isn't found during build.
457 2005-11-19 Peter Maydell <pmaydell@chiark.greenend.org.uk>
459 * bug #14977: sbr/context_read.c: special case an MHCONTEXT of
460 "/dev/null" and don't try to lock it.
462 * bug #9228, debian bug #146449: man/mh-profile.man: make it clearer
463 that lower case environment variables (and in particular mheditor)
464 are internal to nmh and not intended to be set by the user.
466 2005-11-09 Peter Maydell <pmaydell@chiark.greenend.org.uk>
468 * sbr/mf.c: fix buffer overrun with absurdly long addresses
469 (only causes crashes if scan is run with '-width 16536' or similar)
471 * bug #7917: sbr/context_foil.c, sbr/context_read.c,
472 sbr/context_save.c: mark 'no context' with NULL rather than
473 "/dev/null" so we don't inadvertently try to lock /dev/null (which
474 takes up to a minute in some locking configurations and makes post
477 * patch #3913: uip/post.c: pass some globals into sm_init() so that
478 it uses SASL if necessary. (This bug was preventing Bcc'd emails
479 from being sent via SASL authenticated SMTP.)
481 * bug #9813: uip/rmf.c: don't crash if there's no Current-Folder
482 entry in the context file.
484 2005-11-13 Oliver Kiddle <okiddle@yahoo.co.uk>
486 * bug #7833: uip/Makefile.in: remove link to install-mh that caused
487 problems on some systems
489 * bug #739: Makefile.in: install target now depends on all to avoid
490 problem on case-insensitive file systems with the INSTALL file
492 2005-11-10 Josh Bressers <josh@bress.net>
494 * Fedora Bug #172838: configure.in: Fix the AC_PATH_PROG default when
495 sendmail isn't found during build.
497 2005-11-09 Peter Maydell <pmaydell@chiark.greenend.org.uk>
499 * h/aliasbr.h: fix a non-ANSI prototype.
501 2005-11-08 Oliver Kiddle <okiddle@yahoo.co.uk>
503 * Simon Burge: acconfig.h, configure.in, uip/rcvtty.c, uip/slocal.c:
504 fix to handle getutent() on NetBSD
506 * INSTALL, README, docs/README.about, man/nmh.man: update most
507 references to the web page and mailing list locations
509 * bug #10230: etc/Makefile.in, man/Makefile.in, uip/Makefile.in:
510 Michael De La Rue: prepend DESTDIR to install locations
512 * configure.in, */Makefile.in, mts/smtp/smtp.c: replace obsolete
515 2005-11-06 Peter Maydell <pmaydell@chiark.greenend.org.uk>
517 * sbr/fmt_rfc2047.c, sbr/fmt_scan.c, h/prototypes.h: fix various
518 possible overruns of the buffers in fmt_scan() which would cause
519 crashes if scan was run with '-width 16536' or similar.
521 * uip/popsbr.c: fix compile error which only showed up if nmh
522 was configured with --enable-apop.
524 * Debian Bug# 245932, RedHat Bug# 172388: uip/mhparse.c: don't
525 crash when handling a multipart MIME message with an invalid
526 Content-Type header (file handle was being fclose()d twice).
528 * sbr/Makefile.in: adjust lex command to work on both old and
529 new versions of flex.
531 * configure.in: add an AC_PREREQ() so autoconf 2.13 gives a helpful
532 error message and the Debian autoconf-version-guessing wrapper
533 doesn't guess wrongly.
535 2005-11-02 Oliver Kiddle <okiddle@yahoo.co.uk>
537 * Debian Bug# 320069: Nick Rusnov: uip/popsbr.c: fail when
538 kpop connection attempted without KPOP support compiled in
540 * Debian Bug# 320090: Nick Rusnov: sbr/Makefile.in: fix for newer
541 version of flex and remove autogenerated file from cvs
543 * patch #1155: uip/flist.c: speed up flist by skipping stat on
544 files with numbers as names
546 * docs/Makefile.in: include new files in distribution
548 2005-10-11 Bill Wohler <wohler@newt.com>
550 * docs/FAQ: fold questions into MH FAQ and distribute that instead
552 2005-10-05 Oliver Kiddle <okiddle@yahoo.co.uk>
554 * Harald Geyer: h/mh.h, uip/replsbr.c: back out previous change
555 (fork/vfork) and replace with code that handles the issue directly
557 2005-05-18 Oliver Kiddle <okiddle@yahoo.co.uk>
559 * Debian Bug# 143485: Nick Rusnov: h/mh.h: use fork instead of
562 * Debian Bug# 261592: Harald Geyer: uip/mhlsbr.c, uip/replsbr.c:
563 test/report error writing to stdout
565 * mts/smtp/smtp.c, uip/popsbr.c: correct SASL include file locations
567 * docs/COMPLETION-BASH: bash completion definitions from Debian
569 * patch #2863: savannah@brisammon.fastmail.fm: sbr/folder_read.c:
570 fix a bug affecting AFS where nmh was setting the READONLY flag
571 for a folder even when you do have write access to the folder
573 * Carl Mummert: h/fmt_compile.h, man/mh-format.man,
574 sbr/fmt_compile.c, sbr/fmt_scan.c: add unquote() function for
575 removing quotes from RFC-2822 encoded headers
577 2005-02-23 Oliver Kiddle <okiddle@yahoo.co.uk>
579 * use iconv to convert RFC-2047 encoded headers to the
580 character set used by the current locale
582 * sbr/folder_read.c fix Debian bug #202667: crash when a
583 message's filename overflows an int when converted
585 * Updated config.guess and config.sub to the most recent
586 versions (from automake 1.9.5)
588 2005-02-21 Oliver Kiddle <okiddle@yahoo.co.uk>
590 * sbr/getpass.c fix bug where inc crashed on failing to reopen
593 2005-01-27 Oliver Kiddle <okiddle@yahoo.co.uk>
595 * Added -proxy option to inc and msgchk. Based on old patch
596 from Michael Richardson.
598 * On systems where it is available, use nl_langinfo to get the
599 character set if MM_CHARSET is unset
601 2005-01-21 Oliver Kiddle <okiddle@yahoo.co.uk>
603 * sbr/check_charset.c US-ASCII is a subset of UTF-8 so can be
604 handled directly when UTF-8 is being used
606 2004-12-17 Oliver Kiddle <okiddle@yahoo.co.uk>
608 * uip/mhmisc.c Fix -part option to mhshow/mhlist/mhstore to
609 find sub-parts of the specified part
611 2004-11-19 Jon Steinhart <jon@fourwinds.com>
613 * h/prototypes.h, sbr/folder_addmsg.c, uip/mhstoresbr.c,
614 uip/rcvstore.c, uip/refile.c: Added mail directory argument to
615 folder_addmsg in order to make it possible to provide a path to
616 the ext_hook call that is mailpath-based. A problem existed when
617 a folder was a symbolic link and the pwd call would return the
618 path relative to the filesystem, not to mailpath. A new argument
619 was needed because there was otherwise no reasonable way to get
622 2004-11-16 Jon Steinhart <jon@fourwinds.com>
624 * sbr/folder_pack.c: Fixed problem where the refile hook was being
625 called after a message was renamed so that it wasn't around for
626 the hook. The hook is now called before the message file is
629 * sbr/folder_addmsg.c: Fixed wrong directory for hook when
630 refiling with -src option.
632 2004-10-15 Jon Steinhart <jon@fourwinds.com>
634 * uip/sortm.c: Fixed calling of external hooks.
636 2004-10-12 Jon Steinhart <jon@fourwinds.com>
638 * uip/inc.c: Fixed another weird bug caused by the static
639 mailpath being overwritten.
641 * uip/sendsbr.c: Fixed bug that caused anno to mangle headers.
643 * sbr/lock_file.c: Fixed strange bug that prevented a lock from
644 ever being obtained if getting it failed the first time. The
645 problem was that the string of XXXXXX that is required by
646 mkstemp() was overwritten the first time through, and so all
647 subsequent times failed because mkstemp() failed. The fix
648 reinitializes the tmp file string.
650 * uip/inc.c: Fixed bug in which the static maildir was overwritted
651 if a format string was read from the profile.
653 * sbr/folder_delmsgs.c: Fixed bug that was producing an incorrect
654 path for the external hook.
656 2003-10-06 Glenn Burkhardt <glenn@aoi-industries.com>
658 * uip/slocal.c, configure.in: db configuration fix for Debian; yet
659 another location for ndbm.
661 2003-09-30 Glenn Burkhardt <glenn@aoi-industries.com>
663 * Fix 'pick' so handling of options "-list" and "-seq" are
665 * Fix 'inc' realloc error when bringing in more than 100 msgs
667 * Patches submitted by Nick Rusnov from Debian archive applied:
670 136976 - Handle binary content messages
671 143427 - mh-format.man typo
672 144098 - 'spost; should have same behavior as 'post'
673 w.r.t. mts.conf masquerade line
674 149745 - slocal ignores 'N' result of previous command
675 152728 - increase SMTP timeouts to conform to RFC 1123
676 The timeouts suggested by the RFC seem long
677 to me - but the RFC is still listed as active.
678 181867 - typo for nmh.man
680 2003-08-10 Jeffrey C Honig <jch@honig.net>
682 * Fix problem where parsing of address/date fields in fmt_compile
683 is optimized to the first instance. The first instance may be in
684 contitional code which will result in cached data to
685 be used. Instead, convert c_flags to a flags field from a boolean
686 and parse on the first use.
687 * Remove some unused flag bits.
689 Fri Jul 01 22:02:00 2003 Glenn Burkhardt <glenn@aoi-industries.com>
691 * Applied fixes for configuration problems with Solaris and
692 systems with gdbm instead of db1 (includes bug #2024)
694 #578 - repl leaks umask
695 #1393 - sortm core dumps
696 #1650 - msh leaks file descriptors
697 #1730 - Double free() in mhfree.c:free_encoding()
698 #3356 - In-Reply-To header in default replcomps should be
700 * Revised man page for mh-format (bug #2031)
701 * New replcomps, etc, with Fcc: +outbox in default versions
703 Sat Mar 17 03:18:15 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
705 * Ken Hornstein's configure.in Cyrus SASL checks were doing
706 `x"$with_cyrus_sasl" != "no"' instead of `... != x"no"'.
708 Tue Mar 06 21:04:27 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
710 * Found some historical information about MH in RFC 808.
711 Supplemented it with info from Jerry Peek's MH book and added it
712 to docs/README.about.
714 Tue Feb 6 20:35:40 2001 Shantonu Sen <ssen@mit.edu>
716 * sbr/dtime.c Use the same Y2K correction code as dtimep.lex
718 * sbr/dtimep.lex Restrict the parser to accept either
719 a numerical timezone offset, or a symbolic one (e.g. EST),
720 but not both (Since "2000 -400 EDT" might cause a double
721 subtraction of 60 minutes if both are parsed. One should be
724 Mon Feb 05 20:22:54 2001 Dan Harkless <dan-nmh@dilvish.speed.net>
726 * -L isn't sufficient for specifying the path of the Cyrus SASL
727 shared library. That'll allow us to link successfully, but on
728 many/most OSes that won't allow us to find libsasl at runtime. On
729 Solaris, we need to specify the library path with -R as well (or
730 else the user will have to use the $LD_LIBRARY_PATH kludge, which
731 is considered harmful). This fix should be extended to other OSes
734 * Print whether we have SASL support in the "nmh configuration"
735 summary configure prints out.
737 * Say in README.developers to use `\date' in case anyone is like
738 me and has `date' aliased in their shell to use a nonstandard (but
739 subjectively more readable) format.
741 Thu Jan 25 21:15:52 2001 Shantonu Sen <ssen@mit.edu>
743 * man/mh-chart.man has updated synposes of
746 Tue Jan 23 20:26:15 2001 Shantonu Sen <ssen@mit.edu>
748 * etc/digestcomps tried to force dates into a
749 19xx when it's not necessary.
751 Fri Jan 19 21:22:08 2001 Shantonu Sen <ssen@mit.edu>
753 * First round of manpage updates finished. They
754 are standardized on -man macros, with minimal
757 * man/tmac.h.in is no longer needed, since the
758 manpages do not depend on them anymore. Note:
759 strict "man" programs that didn't allow ".so"
760 sourcing outside the man tree will now format
761 the man pages correctly.
763 * man/vmh.1 is no longer built, since uip/vmh isn't
765 Tue Jan 9 6:01:22 2001 Shantonu Sen <ssen@mit.edu>
767 * Finished manpages ali-prev
769 * Removed deprecated files from the repository.
770 Specifically, those rooted in zotnet/ and mts/sendmail
771 mts/mmdf. "cvs update -dP" will give a pruned directory
774 * Updated docs/Makefile.in to include README.manpages, and
775 uip/Makefile.in to include popi.c (which isn't being built,
776 though). This allows "make nmhdist" to create an archive that
777 is file-for-file identical to the current cvs repository.
779 Sun Dec 31 20:48:50 2000 Shantonu Sen <ssen@mit.edu>
781 * Create docs/README.manpages, which details
782 the formatting rules I've been using.
786 Sat Dec 30 9:50:13 2000 Shantonu Sen <ssen@mit.edu>
788 * Created a new file "DATE" to hold the date
789 of the most recent nmh release. This date will be
790 used in the manpages.
792 * Updated docs/README.developers to add the step
793 of updating DATE. Also, updated configure to
794 read in the contents of the file as the variable
797 * Started work on updating man pages, with only
798 ali finished so far. Changes: 1) no dependence
799 on an external macro file, 2) uses only
800 -man macros (although I may be mistaken in this),
801 3) syntax in the SYNOPSIS is a little more
802 in line with standard UNIX documentation, such as
803 bold flags and italicized parameters.
805 Sun Dec 24 10:06:30 2000 Shantonu Sen <ssen@mit.edu>
807 * Updated INSTALL with information about the
808 --with-locking option.
810 * Fixed the Hesiod tests in configure.in. In
811 systems where res_send was in -lresolv, this
812 information was not being communicated to the
813 HESIOD_LIBS var. Now, if res_send is not found
814 in the default libraries, it's assumed to be
815 in -lresolv, and thus -lresolv is appended to
816 HESIOD_LIBS, which will need that to avoid
817 undefined symbols problems.
819 * Fixed the Kerberos tests in configure.in. New
820 versions of Kerberos 5 have renamed -lcrypto
821 to -lk5crypto (circa krb5 1.1 or thereabouts). The
822 new test tries to determine if -lk5crypto exists. If so,
823 this is a new krb5 system. If not, test for -lcrypto
824 and the rest of old krb5. If that fails, look
825 for a genuine krb4 installation.
827 Fri Dec 22 22:08:51 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
829 * -apop and -noapop were not documented in msgchk.man.
830 -snoop was documented but didn't appear in the usage SYNOPSIS.
832 Fri Dec 22 23:42:16 2000 Shantonu Sen <ssen@mit.edu>
834 * Made a new ./configure option called
835 "--with-locking" that allows the file
836 locking mechanism to be chosen there instead of
837 requiring a manual edit of config.h.
839 * If the option is not explicitly set, or an
840 invalid option is specified, "dot" locking is
841 chosen. Valid options are "dot", "fcntl",
842 "flock", and "lockf". We need a way to tell
843 the user that these are the valid options, and
844 change the flag "--with-locking" if it's not
847 Fri Dec 22 19:21:29 2000 Shantonu Sen <ssen@mit.edu>
849 * Remove the lex-specific memory hints at the
850 beginning of sbr/dtimep.lex. We've already
851 committed to supporting flex only, since
852 lex does not easily allow us to parse a single
853 string, as well as other problems documented
854 below and on nmh-workers.
856 * Added a switch statement to configure.in to
857 test for Mac OS X. If this is the case, LDFLAGS
858 should not contain "-s" since the linker rejects
861 * Updated MACHINES to include Mac OS X Public Beta,
862 as well as Linux 2.4 running glibc 2.2.
864 Wed Dec 20 16:00:46 2000 Shantonu Sen <ssen@mit.edu>
866 * Marked deprecated directories in docs/README.developers
867 as deprecated, with pointers to the new code location.
868 Eventually these deprecated directories should go away.
870 Tue Dec 19 19:16:37 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
872 * -apop and -noapop were not documented in inc.man. -snoop was
873 documented but didn't appear in the usage SYNOPSIS.
875 Thu Dec 14 14:32:09 2000 Shantonu Sen <ssen@mit.edu>
877 * Updated config.guess and config.sub to the most recent
878 versions on ftp://ftp.gnu.org/pub/gnu/config, dated
879 12-07-00. This should prevent configure from failing
880 on newer operating systems because config.{guess,sub}
881 couldn't correctly identify them.
883 Thu Dec 14 1:30:44 2000 Shantonu Sen <ssen@mit.edu>
885 * Fixed the circular dependency created when I moved
886 zotnet/mts to mts/generic and merged them into libmts.
887 mts/generic/client.c and mts/generic/mts.c are now in sbr/
888 (and thus in libmh), which makes libmh self-contained and
889 not depending on an external archive.
891 * All include statements now look for mts.h in h/. The
892 Makefiles and configure script have been modified so that
893 mts/generic is no longer built.
895 Mon Dec 11 22:08:07 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
897 * When Shantonu made the new libmts.a, he swapped $(MTSLIB) and
898 libmh.a in sbr/Makefile.in so that libmh.a comes first, but this
899 causes the build to fail on Solaris, because libmts.a has to get
900 ruserpass() out of libmh.a. Swapping them back to the way Ken
901 Hornstein's patch (which I applied on Jul 20) put them, with
902 libmh.a correctly coming second. If there are times when libmts.a
903 needs to come second, then it would appear there's a circular
904 dependency and someone (Shantonu?) did an mts merge incorrectly.
906 Fri Sep 8 01:36:23 2000 Shantonu Sen <ssen@mit.edu>
908 * Took out bad time textual time zones like BST and JST.
909 I found them online somewhere, but am not sure if they're
912 Fri Sep 8 00:36:48 2000 Shantonu Sen <ssen@mit.edu>
914 * Moved zotnet/mts to mts/generic. This code reorganization
915 makes the entire zotnet tree deprecated -- bboards is unneeded,
916 mf was was moved to sbr, tws was rewritten and moved to sbr, and
919 * Created a new static library called libmts.a used during
920 compilation which includes the generic mts code and the
921 smtp/sendmail code. This supercedes the functionality of the
922 old libsmtp.a and the remains of libzot.a.
924 * Updated header includes to reference the new location of mts.h
925 in mts/generic/mts.h. Also, update the configure and top-level
926 Makefile not to descend into zotnet. Also, they don't descend
927 into mts/mmdf and mts/sendmail (the sendmail code has been
928 merged into the smtp code).
930 * Added #include <h/nmh.h> to h/md5.h, since my compile was
931 complaining about implicitly-declared memcpy and memset, which
932 appear to be in strings.h. In any event, nmh.h should take care
935 * When doing a "make nmhdist", notice that the generated
936 snapshot does not include zotnet of the mts directories as noted
937 above. Since they are no longer compiled, and I don't see any
938 obvious code path to get to them, end-users should probably
939 not need them. If you think otherwise, turn Makefile generation
940 back on in configure.in and turn on recursion into those dirs
941 in the appropriate Makefile.in
943 Wed Sep 6 22:40:03 2000 Shantonu Sen <ssen@mit.edu>
945 * Tracked down the problem in the new dtimep where time
946 zones were being radically misreported. It was because the
947 parser knew about military time zones (such as M or E) but in
948 some cases did not know about the textual representation of
949 some zones (like MET). When it encountered one of these, the
950 date parser misread MET as the military time zone T (well, first
951 zone M, then E, and finally T). I took military zones out, and
952 things seem much better. Also, the default behavior of parsing
953 time zones appears to default to GMT in the absence of better
954 info, which is less bogus than assuming the mail came from the
955 current time zone, which was the behavior in 1.04.
957 Thu Aug 10 13:22:13 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
959 * Decided that limiting the message number columns to 3 on my
960 scan.MMDDYY and scan.YYYYMMDD (to try to regain space taken by
961 extra date info) was ill-conceived. It's not that tough to get
962 past 999 messages, though I imagine it's rather rare to exceed
963 9999. Changed these to 4. Also put the "replied / encrypted"
964 column back in YYYYMMDD -- I've never seen it show anything but a
965 space, but that space is useful if you use scan, grep, and awk
966 (with the default field separator) to grab message numbers (I know
967 -- pick should really be used for these purposes...).
969 Mon Aug 7 20:11:09 CEST 2000 Ruud de Rooij <ruud@ruud.org>
971 * Modify umask set by mhshow to enable user execute bit, so that
972 viewers that create temporary directories (e.g., lynx) will be
975 Thu Aug 03 17:14:08 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
977 * TODO: Allow multiple simultaneous differing contexts, probably
978 each tied to a parent (terminal) process.
980 Tue Aug 1 10:48:05 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
982 * Makefile install rules should not look for generated files in
983 the source tree -- this will happen to work when configuring and
984 building inside the source tree but will fail when using an
985 external build tree. Fixed etc/Makefile.in.
987 Mon Jul 24 16:20:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
989 * When Shantonu wrote the new, more portable dtimep.lex, he left
990 out the #ifdef DSTXXX stuff for some reason. Not a good idea, as
991 that code is required for proper printing of numeric-offset
992 timezones that have daylight saving time. Without that code,
993 -0700 during DST gets printed as MST instead of PDT.
995 * Renamed DSTXXX as ADJUST_NUMERIC_ONLY_TZ_OFFSETS_WRT_DST and
996 added an explanatory comment by its #definition.
998 * Updated README.developers with the fact that zotnet/tws is going away.
1000 Thu Jul 20 20:30:52 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1002 * Moved Kimmo's new "--with-hash-backup" to be output with the
1003 rest of the --with options in the configure --help output. Also,
1004 people did not preserve my alphabetization of the --with options
1005 when they added new ones. Re-alphabetized.
1007 * One more pass at README.developers now that it's clear that my
1008 previously-suggested one-line autoconf-file commit can cause
1009 unnecessary local makes and an out-of-sync stamp-h.in file, but
1010 would not cause problems for other people using the CVS files.
1012 * Ken Hornstein's SASL patch was not integrated properly with
1013 Ruud's new merged mts/sendmail code. Kimmo has since fixed nmh so
1014 it compiles, but according to Ken, the SASL stuff still does not
1015 work. Integrating a patch from him for this.
1017 * Last pass at README.developers -- Kimmo's 5-step commit was
1018 overkill. You only need 3 steps, since configure.in is the only
1019 autoconf file with the RCS $Id keyword.
1021 * Applied Kurt J. Lidl <lidl@eng.us.uu.net>'s $MAILHOST patch:
1023 I have a small patch that would be nice to be included --
1024 basically, it allows the usage of the "MAILHOST" environment
1025 variable, without having to have HESIOD turned on. I need
1026 this functionality for my environment, where we have identical
1027 /usr/local on all my machines (so I cannot just hardcode into
1028 the mts.conf file), and I have multiple POP mail servers for
1031 Modified inc.man to reflect that along with "pophost:" and -host,
1032 $MAILHOST can now activate POP mail inclusion as well.
1034 * Fixed warnings from diff on first-time install of nmh. Also
1035 added 'echo's clarifying the etc file installation activities.
1037 Tue Jul 18 19:36:59 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
1039 * Added the answer to Dan's question in README.developers.
1041 Mon Jul 17 19:10:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1043 * Clarified and made some corrections to Kimmo's README.developers
1044 changes (BTW, if anyone can explain why the RCS Ids are able to cause
1045 problems with the dependencies, please fill in the explanation --
1046 I never encountered a problem with the old single-commit method).
1048 Sat Jul 15 23:13:49 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
1050 * Add configure option --with-hash-backup so the backup prefix can
1051 be easily changed from "," to "#".
1053 * Simplified sbr/Makefile.in so that it works with any make.
1055 * Use mkstemp in sbr/lock_file.c.
1057 * Commits of autoconf-related files apparently can't all be done
1058 in one shot due to RCS Ids changing when committing -- updated
1061 Tue Jul 11 14:18:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1063 * Clarified post.man and send.man for those not completely up on
1064 SASL terminology. "SASL encryption layers are not supported for
1065 SMTP" means that encryption is supported for the authentication
1066 but not for the subsequent data stream.
1068 Sat Jul 8 01:36:19 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
1070 * Applied Ken Hornstein <kenh@cmf.nrl.navy.mil>'s patches
1071 implementing SASL support for POP3 and SMTP. If nmh is compiled
1072 with SASL support, using the -sasl switch on the inc, msgchk,
1073 post, and send commands will enable authentication encryption for
1074 SMTP, and both authentication and data stream encryption for POP3.
1076 Sat Jun 10 18:37:59 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1078 * Merged mts/sendmail functionality into mts/smtp; switching between
1079 smtp and sendmail delivery method is now controlled by mts.conf.
1081 * If tsort cannot deal with loops, in addition to defining tsort as
1082 cat, also define lorder as echo.
1084 * Removed uip/popi.c from list of sources.
1086 Thu Jun 08 19:36:57 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1088 * New dtimep.lex didn't parse day names properly. Fixed. Also
1089 clarified ambiguous comments preceding day_map[] array (from old
1090 dtimep.lex) that probably led to the erroneous cp++ being added.
1092 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1094 * Added one more mkstemp invocation to uip/spost.c (which was in a
1097 * Applied patch from Peter Maydell to clean up permissions handling
1098 and error handling in uip/inc.c.
1100 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1102 * Use cat instead of tsort if tsort cannot deal with loops in its
1103 input (which is the case for tsort from GNU textutils).
1105 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1107 * If lockfile is present, and its dotlockfile program is setgid,
1108 inc does not need to be setgid.
1110 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1112 * Added autoconf test for Miquel van Smoorenburg's liblockfile
1113 library, as found on Debian systems.
1115 * Added liblockfile support to sbr/lock_file.c.
1117 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
1119 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
1120 increase available memory. Took out %option noyywrap, which
1121 wasn't understood by AT&T lex, as well as the -i
1122 case-insensitivity flag.
1124 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
1126 * Added a lint target to the Makefiles and a check in autoconf
1127 to determine whether lint or lclint exists on the system.
1129 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1131 * etc/Makefile.in was incorrectly installing mts.conf.in and
1132 sendfiles.in -- fixed. Generated sendfiles script was not a
1133 dependency of the `all' target, and was incorrectly included in
1134 the distribution. Changed the suffix for the backed-up previous
1135 versions of the etc files from the ambiguous .old to .prev. Added
1136 call to diff -- only keep the .prev files around if different from
1137 the newly-installed versions (intentionally didn't redirect output
1138 to /dev/null so you'll notice when your changed versions are
1139 getting moved aside).
1141 * INSTALL never documented the etc/*.old thing. Documented the
1142 new etc/*.prev thing (including a note to watch for diff output).
1144 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
1146 In the map_write routine, a call is made to map_open and this
1147 call is supposed to set the "clear" variable to 0 or 1,
1148 depending on whether the map file is empty or not. In
1149 mh6.8.3, this worked because map_open would set "clear" by
1150 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
1151 was merged into mbx_open, but the interface for mbx_open
1152 doesn't support the clear variable, so that functionality was
1153 lost. The map_open interface still contains "int *clear" in
1154 the prototype, but never sets it.
1156 My patch eliminates "clear" from the map_open interface (I
1157 checked to make sure that map_write is the only client of
1158 map_open). Furthermore, my patch also sets the "clear"
1159 variable properly at the beginning of map_write by calling
1160 fstat(). This eliminates the bug in that the value of "clear"
1161 being used later in the routine was just stack garbage.
1163 Having a bad value of clear causes this next bug to be
1164 triggered: The fp file pointer was being opened with fdopen,
1165 but in two of the three switch cases it wasn't being closed.
1166 In certain cases, this was causing packf to run out of file
1167 descriptors if you attempted to pack a large folder.
1169 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
1171 * Moved the date parsing routines from zotnet/tws to sbr/ (and
1172 tws.h to h/). Updated all source files to reflect to new location
1175 * Rewrote dparsetime (in dtimep.lex -> dtimep.c) to replace the
1176 old zotnet/tws/dtimep.c, dtimep.lex, lexstring.c, lexedit.c, and
1177 dtimep.c-lexed. It should now work with flex (although untested
1178 with lex), and requires no sed-ing. For now, I have the lexed
1179 version in the distribution, so that end-users don't need to worry
1180 about running it through flex/lex. I have not added back support
1181 for guessing the time zone when it's not specified.
1183 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1185 * Added autoconf check for getutent().
1187 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
1188 friends. Since I can only check on Linux, please check if
1189 this works on other systems.
1191 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1193 * Applied patch from Peter Maydell to uip/scansbr.c for more
1194 checks for write failures.
1196 * Unlink temporary file properly in uip/rcvtty.c.
1198 * Moved viamail from bindir to libdir.
1200 * Changed sendfiles into sendfiles.in, so that path to viamail
1203 * Added gzip support to sendfiles.
1205 * Added References header to replcomps and replgroupcomps.
1207 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
1209 * Fixed m_getfld bug which caused segmentation faults when
1210 incorporating messages which ended in multiple linefeeds crossing
1213 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1215 * msh has been unable to show MIME messages ever since 1.0. Alec
1216 Wolman <wolman@cs.washington.edu> tracked down the problem to the
1217 -show flag being passed to mhshow. mhshow is equivalent to the
1218 old mhn -show, so we don't need the -show anymore. Removed it.
1220 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
1222 * zotnet/bboards is not longer built by default. Goal is to move
1223 the assorted functions in zotnet into sbr or some more logical
1226 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
1227 as well as Makefiles.
1229 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
1231 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
1232 seperately and redundantly defined, but so that OBJS is a
1233 pattern-substituted version of SRCS with suffix .c -> .o. This
1234 should make maintainability easier.
1236 * Added section to MACHINES indicating what platforms nmh is known
1237 to compile and work on, just to give users peace of mind, or
1238 something. This is by no means complete or exhaustive, so add
1239 whatever you know works.
1241 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1243 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
1244 enabled" line. If POP3 is the only kind of POP enabled, say so,
1245 rather than just saying "yes" (which is ambiguous).
1247 * Fixed four warnings in Shantonu's new getpass.c. Needed to
1248 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
1249 "h/mh.h" for adios(). Also changed ch from char to int to get rid
1250 of "comparison is always 1 due to limited range of data type" on EOF.
1252 * Added steps to README.developers saying to change the version
1253 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
1254 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
1256 * Changed configure.in to use gcc -Wall even without
1257 --enable-debug, to prevent developers compiling optimized from
1258 introducing warnings, and to give end-users a warm, fuzzy feeling
1259 as they (hopefully) see no warnings come out (except perhaps on
1260 the lex output file) even with -Wall.
1262 * Renamed getpass() to nmh_getpass() since the prototype for
1263 getpass() varies from OS to OS, and we want to _always_ use our
1264 version of the function. Fixed all the callers to use
1265 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
1266 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
1267 and the memory leaked -- should have just been declared as static
1268 char array. Prepended "Portions of this code are" to the
1269 copyright message, as this version has been changed significantly
1270 from the BSD version.
1272 * Added "nmh-local functions to use in preference to OS versions"
1273 section to README.developers (currently just says to use
1274 nmh_getpass() instead of system getpass()).
1276 * Prepended "Portions of this code are" to the copyright message
1277 in ruserpass.c also.
1279 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
1282 This happens on solaris:
1285 windex entry incorrect: mts.conf(5) not found.
1286 No manual entry for mts.conf.
1290 % echo ".so man5/mh-tailor.5" > mts.conf.5
1292 done in the man5 directory. We need to add 'mts.conf.5' as a
1293 reference sourcing mh-tailor.5.
1295 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1297 * Doug informed me that the way I had restored the "lost" version
1298 histories was wrong, because `cvs checkout's of old versions of
1299 nmh wouldn't work properly. It occurs to me that this could be
1300 fixed by simply deleting those tags in the new-location *,v files,
1301 but oh well. I'm putting everything back to the way Doug
1302 originally had it. To get the old version history for a file that
1303 used to be in the top directory, you'll need to "blindly" do a
1304 `cvs log' there (even though you won't have a local copy of the
1305 file in that directory). `cvs diff' will no longer be able to
1306 diff pre-move versions vs. post-move versions -- you'll have to do
1307 a lot of manual gyrations with `cvs checkout' and then use `diff'.
1309 * I had alphabetized the --configure options in the --help output
1310 awhile back, but Shantonu added --enable-apop just under
1311 --enable-pop. Put it in alphabetical order and clarified what
1312 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
1313 --with-mts help line from "mail transport agent" to "mail
1314 transport agent/service" so the 's' in "mts" doesn't seem to come
1317 * Added two steps to "releasing nmh" in README.developers. After
1318 making the tarball, it's a good idea to diff the tree vs. the CVS
1319 tree to make sure no files got left out, and then to chown the
1320 files so that they're owned by root, preventing a Trojaning attack
1321 by a malicious remote user with a UID matching yours.
1323 * Changed DIFFERENCES to say that RPOP is not currently supported
1324 rather than implying it by saying that APOP, KPOP, and POP[3] are.
1326 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
1328 * Imported NetBSD version of getpass() and made extensive
1329 revisions for compatibility with programs that pipe the password
1330 to stdin, such as exmh.
1332 * Removed tests for system ruserpass() which sometimes gave
1333 phantom positive results. Also, bext to use internal functions if
1334 we ever want to change .netrc format to something else, or access
1337 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1339 * Restored lost version histories for those moved files by doing a
1340 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
1341 command so that you can move files (without having physical access
1342 to the CVSROOT) without losing versioning. Put MACHINES back at
1343 the top level as it needs to be read before building. Fixed DIST
1344 variable in {.,docs}/Makefile.in to reflect that and to add
1345 missing entry for "INSTALL" file.
1347 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
1349 * Re-cleaned up nmh documentation (by moving things to docs
1350 subdir) and modified Makefile & configure.in to handle the change.
1352 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1354 * Scott Blachowicz pointed out that the configure --help output
1355 for --enable-masquerade was misleading. Clarified.
1357 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
1359 * APOP support can be compiled in to inc and msgchk using
1362 * To access an APOP host, specify -apop on the command line
1363 along with any -host or -user option.
1365 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1367 * Upped the version number to 1.0.4+dev until the next nmh release.
1369 * Added a "releasing nmh" section to README.developers, while the
1370 process was fresh in my mind.
1372 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1374 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
1375 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
1377 * Released nmh-1.0.4.
1379 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1381 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
1384 It appears that there shouldn't be quotes around the %s in the
1385 iso-8859-1 charset entry; xterm passes the remaining arguments
1386 to the program, quoting them means that xterm thinks they're
1387 part of the program's name.
1389 This %s isn't the same as the "Insert content subtype" one from
1390 mhshow-show-* -- it doesn't come from MIME headers and is safe not
1393 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
1395 * added check in fmt_compile() to handle a single-character
1396 format string. fmt_compile() depends on having an array of
1397 format characters with an empty item at the end. A
1398 single-character format would cause programs using this
1399 function to segfault because the algorithm used to decide on
1400 the length of the array mistakenly created a single-item array
1401 when the format string was one character. This eventually
1402 caused problems when the program attempted to test item+1
1405 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1407 * Richard Coleman threw out a lot of old MH-specific files in nmh.
1408 Much of the stuff, indeed, is not worth saving, but there are
1409 nuggets that are very worthwhile, and should probably be added
1410 back in. Most important, IMHO, are the MH change logs, as they
1411 can help answer questions like "Why is this code like this?" or
1412 "How long has this been broken?" or "What was this ever used for?"
1414 I've added a new file to the nmh tree called
1415 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
1416 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
1417 to go from newest at the top to oldest at the bottom to match the
1418 ChangeLog convention. Unfortunately there are no change logs for
1419 versions of MH prior to 3 in the MH tar files available at
1420 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
1421 are MH-6.6 changes that aren't documented in the logs.
1423 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
1424 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
1425 and its "catman"-type output are a pain to deal with, but I was
1426 loath to throw away the formatting, so I converted the file to
1427 HTML. The only actual markup in the body are the "<B>" and "<U>"
1428 tags, and "<" and ">" instead of '<' and '>', so it's quite
1429 doable to view the file in plain ASCII mode as well. Note that
1430 some of the changes this file documents as having been made in
1431 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
1432 and later put in certain 6.8.4 stuff.
1434 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1436 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
1437 fixing apparent bugs in Dan Winship's new security quoting code:
1439 Since upgrading, I've been getting the following errors
1440 while attempting to process some MIME messages:
1442 (1) Syntax error: Unterminated quoted string
1447 (2) line 1/10 (END)Segmentation fault (core dumped)
1449 (2) appears to be due to the testing of an unset pointer in
1450 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
1451 mis-quoting a filename being handed to the shell in
1452 mhshowsbr.c:show_content_aux().
1454 Resolving the pointer reference issue in
1455 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
1456 problem in the routine.
1458 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
1460 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
1461 prevent core dumping on packf. Here's the note from his message:
1463 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
1464 core on a file w/o a From line with a line >= BUFSIZ.
1465 I noticed this because I had a junk file in my mail
1468 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1470 * wesley.craig@umich.edu did not document his previous KPOP patch,
1471 so I did so, and asked him to check what I wrote. Unfortunately
1472 he didn't notice my misunderstanding of his patch. I wrote that
1473 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
1474 exclusively, but if you leave it as "pop3", you can use Wesley's
1475 new -kpop switch on a given invocation. Instead, however, -kpop
1476 turned out to be necessary on every invocation, and a KPOP user
1477 complained. Applied Wesley's new patch, which makes things work
1478 like I thought his original patch did. After that, did one more
1479 clarifying pass to the documentation in inc.man and msgchk.man.
1481 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1483 * When I fixed the long-standing makedir() bugs in January, I had
1484 the code call strtoul(..., 0), which I believed to be safe as all
1485 modes specified as ASCII constants in the nmh code started with a
1486 leading zero (signifying octal), which I did as it would work if
1487 internal constants were ever changed to hex. Unfortunately I was
1488 unaware of the "Folder-Protect:" .mh_profile entry, which
1489 mh-profile.man documents as an octal-only constant, with no
1490 leading zero required. I've changed the strtoul() call to an
1491 atooi() call and removed the misleading leading zeroes on the
1492 ASCII octal constants in the code and man pages. Also changed the
1493 "Folder-Protect:" example in the man page to something more
1494 interesting than a duplication of the default.
1496 * When I added my --enable-masquerade option, you'll note that I
1497 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
1498 options too wordy and I'm not sure why Richard went that route.
1499 I've renamed them to just --enable-*, but the old versions will
1500 still work as well (they just aren't advertised).
1502 * Added a line to the "nmh configuration" output saying whether
1505 * Added a new README.developers file. From the file:
1507 This file is intended to provide a few tips for anyone doing
1508 development on nmh. Developers who learn things "the hard
1509 way" about the nmh codebase (as opposed to local info best
1510 encoded in a comment) are encouraged to share their wisdom
1513 Currently the topics are "autoconf files" and "directory structure".
1515 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1517 * Applied, after some finessing,
1518 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
1520 Here's a patch that allows you to add
1522 --with-smtpservers=<some.host.name>
1524 to the ./configure command line to set the "servers: " line in
1525 etc/mts.conf. Around here, we use "mailhost" so that all
1526 machines in the current domain just talk to a central machine
1527 and nothing else runs an MTA. Now, I can use
1529 --with-smtpservers=mailhost
1531 instead of having to remember to fix this by hand (and often
1532 forgetting to do so!).
1534 * Inspired by Simon's patch, added an --enable-masquerade option
1535 to configure. It will set the "masquerade:" line of mts.conf.
1536 You may specify a subset of the three types of masquerading, like
1537 --enable-masquerade="draft_from mmailid", or leave off explicit
1538 arguments to enable all three types.
1540 * Alphabetized the --enable and --with options in configure.in and
1541 INSTALL and added documentation of the two new options to the latter.
1543 * Added new dependency for mts.conf: Makefile. If this isn't
1544 done, then when you reconfigure nmh with new values for
1545 --enable-masquerade or --with-smtpservers, you'll fail to get an
1546 updated copy of mts.conf.
1548 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
1550 It seems that some MUA's didn't handle y2k very well - ELM
1551 seems to be one of them, and Ultrix's DXmail (based on MH!).
1552 I've got a few emails this month that look like:
1554 575 Jan 00 Xxxxxx Xxxx 3603 ...
1556 22+ Jan 00 Xxx Xxxxx 1771 ...
1558 The first has "15 Jan 100" as the date and the second has
1559 "19 Jan 00" as the date. The following works around this so
1560 that scan, show, sortm, etc work ok.
1562 I put Simon's patch under the control of a new #define called
1563 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
1564 acconfig.h about when you might not want to #define it.
1566 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
1567 lexed on Solaris 2.6. Added missing dependency in
1568 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
1570 * Added scan.MMDDYY and scan.YYYYMMDD format files.
1572 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1574 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
1576 With the patch below, you can add lines like:
1578 mhshow-suffix-application/msword: .doc
1579 mhshow-suffix-application/PostScript: .ps
1581 to the mhn.defaults file to append the given suffix to a
1582 scratch file. This allows applications which require a
1583 certain suffix to run properly.
1585 * Removed -force_html from lynx entry in mhn.defaults.sh (I
1586 believe older versions of lynx lack that option) and added
1587 "mhshow-suffix-text/html: .html".
1589 * Modified username_extension masquerading to only use the
1590 extended address on generated [Resent-]From: lines and SMTP
1591 envelope From:. With Neil's original implementation, nmh's global
1592 idea of the username was changed, which would result in inc lying
1593 and saying you had no new mail because it was looking for a
1594 mailbox called, for instance, "dan-nmh" (where username was "dan"
1595 and $USERNAME_EXTENSION was "-nmh").
1597 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
1599 There's a wrap-around problem that affects the implementation
1600 of Zeller's congruence in dtime.c. This causes the day-of-week
1601 calculations to fail for dates after Feb 29, 2000 (probably up
1602 until some year far in the future).
1604 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1606 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
1608 I finally tracked down the problem in msh that was causing
1609 errors whenever I tried to examine a 'mmdf' style mailbox.
1611 It turns out that not enough memory was being allocated with
1612 calloc(), causing memory pointers to be overwritten and
1615 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1617 * Changed the new "plussed_user" option to mts.conf's
1618 "masquerade:" to "username_extension" after getting feedback from
1619 qmail users, who use '-' as a separator rather than '+'. Removed
1620 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
1621 which needs to include the appropriate separator for your MTA
1622 ('-', '+', or whatever) as its first character.
1624 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1626 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
1628 * Added a note to DIFFERENCES stating that it's out-of-date
1629 (Richard was the last one to update it) and that we should
1630 consider only documenting incompatibilities with MH there.
1632 * Implemented (and documented) a third kind of username
1633 masquerading: "plussed user" masquerading. This one was suggested
1634 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
1635 "plussed user" feature, where mail sent to <user>+<string> will be
1636 delivered to <user>. When it's enabled, it's controlled by the
1637 $USERPLUS environment variable. How is it enabled? Well, that
1640 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
1641 changed it so that rather than being a boolean, it can be set to
1642 any combination of the three values "draft_from", "mmailid", and
1643 "plussed_user". Thus it is now possible to enable the three types
1644 of masquerading individually.
1646 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
1647 where if it was turned on, ','s would no longer be considered
1648 GECOS field delimiters.
1650 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1652 * Changed the GECOS-field '&' translation behavior to be
1653 controlled by the BSD42 #define rather than GCOS_HACK, since it's
1654 apparently always appropriate on OSes where BSD42 is #defined, and
1655 never appropriate on any other OSes. Thanks to Kimmo Suominen for
1656 responding to my "What is this code here for?" comment in mts.c
1657 and explaining the feature.
1659 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1661 * Upped the version number to 1.0.3+dev (ideally this should be
1662 done by whoever makes a release tar file, immediately after doing
1665 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
1666 patch, posted to comp.mail.mh, which he says prevents loss of mail
1667 when inc'ing into a full filesystem.
1669 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
1670 so that stamp-h.in will be different each time configure.in and
1671 related files are changed, making it easier to check it in (which
1672 is necessary to prevent unnecessary autoconf calls).
1674 * My declaration of initgroups() in slocal.c to eliminate the "no
1675 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
1676 use AC_EGREP_HEADER to see where initgroups() is declared, if
1679 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
1681 * Fix security hole in mhshowsbr.c which allowed untrusted shell
1682 code to be executed.
1684 * Released nmh 1.0.3.
1686 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1688 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
1689 be surrounded by single quotes, as a shell is not spawned when
1690 just saving files, and the filenames will end up with literal
1691 quotes embedded in them.
1693 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1695 * Whoever originally added the -help switch to all the commands
1696 got too cute and had the option itself print out as "-(help)" in
1697 the -help output. One theory is that they were making reference
1698 to the fact that clearly you know about the -help option since
1699 you're currently looking at its output. I think it's a bad idea
1700 to overload the meaning of the parentheses, however -- they're
1701 supposed to indicate what abbreviated prefix of the switch you're
1704 The other theory is that because you can say something like
1705 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
1706 by the same list of switches you get with -help, they were saying
1707 you can "sorta" abbreviate "-help" as "-". You don't get the
1708 "Usage:" string, though, so it's not really the same thing.
1710 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1712 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
1714 The following patch fixes a problem with requesting a
1715 service key for a machine that has multiple 'A' records. It
1716 also makes "-kpop" a command line option, for users who
1717 would like to use both "kpop" and "pop".
1719 Did no testing of the new features, as I don't have access to a
1722 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
1724 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
1726 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1728 * All %-escapes in mhn.defaults that actually expand to something
1729 should be surrounded by single quotes. Added quotes to the ones
1730 in mhn.defaults.sh that were missing them.
1732 * Added check for lynx to write mhshow-show-text/html line in
1735 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1737 * makedir() had multiple bugs dating back to MH. An octal
1738 constant was apparently being interpreted as decimal, resulting in
1739 directories with no user read or execute permissions, making
1740 nested directory creation fail. And there wasn't even an
1741 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
1742 in .mh_profile) on the outer directories of a nested directory.
1744 * A second `make install' would always fail because the check for
1745 whether mh_profile.5 existed was written incorrectly.
1747 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1749 * Added documentation on both types of masquerading to post's man
1752 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1754 * Doug's portability fix of my setgid inc autodetection had a
1755 caching bug -- if you re-ran configure, uip/Makefile would be
1756 corrupted, and installation would bomb out on OSes where inc needs
1759 * Implemented a new kind of email address masquerading. Usually,
1760 when a user writes a custom "From:" header in a draft, nmh uses it
1761 rather than generating one. However, the user's true address is
1762 used in the SMTP envelope "From:" and is revealed in the "Sender:"
1763 header. Now, when mmailid is set to non-zero, the envelope
1764 "From:" uses the address specified in the draft "From:" header,
1765 and there is no "Sender:" header. This is useful when sending on
1766 behalf of a remote POP3 account or when remote mail robots
1767 incorrectly use the envelope "From:" in preference to the body
1768 "From:". This processing has only been implemented for post, not
1769 for the undocumented spost (which was already missing some "From:"
1770 processing that post has).
1772 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
1774 * Got rid of the rest of the gcc -Wall warnings that I didn't have
1775 time for on 1999-07-15 (and, it would seem, some new ones people
1776 introduced since then). The primary ones were the warnings that
1777 default prototypes were being used for [v]snprintf() and
1778 str[n]casecmp(). As of right now, there are _no_ compilation
1779 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
1782 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
1784 * Move mhtest from bindir to libdir.
1786 * Move sendfiles from libdir to bindir.
1788 * Updated sendfiles manpage to reflect this change.
1790 * Added documentation for -build and -file switches to repl and
1791 forw manpages (patch from Peter Maydell).
1793 * Fixed interaction between specifying -cc in profile and -group on
1796 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1798 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
1799 not unanimous support for my proposed even/odd release/developer
1800 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
1803 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1805 * Upped the version number to 1.0.3. If we don't do this, then
1806 when people report bugs against 1.0.2, we won't know "which" 1.0.2
1807 they're talking about (since the development source is publically
1808 available via CVS). I think the Linux kernel version numbers are
1809 a good model, so the next time we roll a tarball, it should be
1810 version 1.0.4 (or higher -- anyhow, an even-numbered version).
1812 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
1814 * Released nmh-1.0.2.
1816 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
1818 * Added check for whether "libtool" is in fact gnu libtool. If
1819 it is, it is not used. This is the wrong behavior. If vendor
1820 XYZ later on decides to create yet another libtool, we'll be
1821 caught again. This works for now.
1823 * Minor updates to MACHINES refering to Mac OS X.
1825 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
1827 * Added check for "libtool" (a ranlib type tool for Mac OS X)
1828 and modified Makefiles so that nmh will build under Mac OS X.
1830 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
1832 * Changed repl defaults to partly revert to MH behaviour,
1833 "-cc all" is now only implied with -group.
1835 * The replcomps template includes cc: header again (as in MH).
1837 * Updated repl man page to reflect these changes.
1839 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
1841 * Tweaked configure to handle Solaris and SunOS after the BIND
1842 changes. Both need more cleanup.
1844 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
1846 * Removed BIND define and replaced it with a check for
1847 gethostbyname (to determine if the host is DNS aware) and a
1848 check for sethostent. This appears to be the right thing to
1849 do, but there is no explanation of the reasoning behind the
1850 BIND define in the code and it appears to have been used for
1853 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
1855 * Updated manpages Makefile to link mh-profile.5 to
1856 mh_profile.5 after installation. Suggestion from Richard Cohen
1857 <richard@jubjub.demon.co.uk>.
1859 * Modified configure.in to check for _IO_write_ptr and libio.h
1860 to determine whether to define LINUX_STDIO instead of using
1863 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1865 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
1866 multiple machines in the past where the mail spool was a symlink
1867 to a directory on another device with more free space.
1869 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1871 * Fixed a portability problem in Doug's fix of a portability
1872 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
1874 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
1876 * Added config.sub and config.guess to the list of files to be
1879 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
1880 added if a list of addresses was split over several header lines.
1882 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
1883 macros, regardless of platform.
1885 * Allow q to quit mhshow, and n to skip to next part. Patch from
1886 Kimmo Suominen <kim@tac.nyc.ny.us>.
1888 * Modified mhstore to recognize attachments created by sendfiles
1889 with x-conversions=gzip.
1891 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
1893 * added explicit cast to long from time_t for tclock in
1896 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
1897 it's needed for ioctl() anyway. This prevents a warning about
1898 implicit definition of ioctl().
1900 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
1901 "User Configuration" section of config.h (moved @TOP@ in
1902 acconfig.h) so they're easier to find, should someone actually
1903 want to mess with them.
1905 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
1907 * updated Makefile.in so it recognized COMPLETION-TCSH and
1908 COMPLETION-ZSH (only used in make nmhdist).
1910 * added prototype for ruserpas to <h/prototypes.h>. Fixes
1911 warnings in mhparse.c and mhbuildsbr.c.
1913 * added include checks for <time.h> and <sys/time.h> to
1914 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
1915 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
1917 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
1918 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
1919 warnings about implicit definition of mts_init().
1921 * added <grps.h> to slocal.c to prevent warnings about
1922 function initgroups.
1924 * added <h/signals.h> to prevent warning about missing SIGNAL
1927 * added function prototypes to smtp.c, whatnowproc.c,
1928 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
1931 * explicitly declared mbx_style in mshcmds.c and lused in
1932 fmtdump.c as type static int instead of just static to
1935 * various code cleanups to prevent ambiguous statements
1936 (brackets for if/thens and parens for complicated if
1940 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
1942 * commented out _cleanup() in mf.c because it's the only
1943 location in all of the source code where it exists. It was
1944 preventing compilation on at least linux.
1946 * Added check for <db1/ndbm.h> which is the new location where
1947 linux systems appear to be stuffing this header file.
1949 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
1951 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
1953 * added mh_profile SEGV patch from Richard Cohen
1954 <richard@jubjub.demon.co.uk> that prevents crashing when
1955 mh_profile doesn't end in a newline. A similar patch was
1956 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
1958 * fixed bug in associated with MAILGROUP #define (group "mail"
1959 is not universal) -- hard to believe, but true.
1961 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1963 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
1965 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1967 * Automated #define of MAILGROUP and installation of inc as setgid mail
1968 when the mail spool directory isn't world-writable.
1970 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
1972 * slocal -debug used to leave a file in /tmp for each message
1973 processed. Very bad for folks with slocal -debug in their .forward!
1975 * Got rid of a ton of compilation warnings. Most were "junk"
1976 warnings due to the use of gcc -Wall (without -Wno-parentheses),
1977 but a few represented real bugs. There remain many warnings to be
1978 tackled that are due to missing function prototypes (e.g. snprintf()).
1980 * Default rcvdistcomps no longer puts a copy of all outgoing
1981 messages in outbox. Added an rcvdistcomps.outbox that does.
1983 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
1985 * Updated configure to check for mkstemp (available on OpenBSD) and
1986 substitute it for mktemp if available.
1988 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
1990 * Added config.sub and config.guess and updated acconfig.h and
1991 configure.in to automatically detect system type and set the
1994 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
1996 * Released nmh-1.0.1.
1998 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
2000 * Fixed flist to properly deal with relative folder names.
2001 Problem noted by Jerry Peek <jpeek@jpeek.com>.
2003 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
2004 well as the Kerberos 5 compat libraries. Based on a patch from
2005 Assar Westerlund <assar@sics.se>.
2007 * Added a check in configure.in to test if modf is in libc and
2008 link with libm if not. This is needed by at least Digital UNIX.
2009 Problem pointed out by Kevin Oberman <oberman@es.net>.
2011 * Fix a bug from the "mhn -show" to "mhshow" renaming that
2012 made the "list" command in whatnow not work for some users.
2013 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
2015 * Replaced "extern int errno" with "#include <errno.h>" in a
2016 number of files. Suggested by Stephen Wilson Bailey
2019 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
2020 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
2022 * Fixed a segmentation fault in inc. Patch originally from Ruud de
2023 Rooij <r.c.m.derooij@twi.tudelft.nl>.
2025 * Allow display of 8bit encoded messages. From Kimmo Suominen
2026 <kim@tac.nyc.ny.us>.
2028 * Fixed repl to not add line breaks in the middle of long
2029 addresses when building a reply. From Ruud de Rooij
2030 <r.c.m.derooij@twi.tudelft.nl>.
2032 * Added -library switch to spost so it can parse user aliases like
2033 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
2035 * Changed configure.in's check for sigsetjmp to properly deal
2036 with systems like Linux where it is a macro. From
2037 <elleron@servtech.com>.
2039 * Fixed a bug in whatnow that could cause it to sometimes exit
2040 without prompting the user. Based on a patch by Richard Geiger
2043 * Added code to deal with SIGPIPE in mhl so it doesn't print
2044 "Broken pipe" if you quit out of the moreproc.
2046 * Documentation: Added a note to MACHINES about Irix make. Added a
2047 pointer to the online copy of the MH book in INSTALL. Added
2048 some additional information to the whatnow and packf man pages,
2049 suggested by Jerry Peek <jpeek@jpeek.com>.
2051 * Updated INSTALL, FAQ, etc to not refer to Richard as the
2052 maintainer or math.gatech.edu as the home any more.
2054 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
2058 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
2059 mbx_open so that the mode of zero length maildrops
2060 would not be changed.
2062 * Replaced the substitute version of snprintf() with the
2063 one from the Apache web server.
2065 * Changed to default mode for creating new messages to 0600
2066 (this should have been done a long time ago).
2068 * Changed "flist" to handle searching for multiple sequences
2069 for each folder. Also flist will now correctly split
2070 Unseen-Sequence if it consists of multiple sequences.
2072 * Added new switches `-unlink' and `-nounlink' to "refile".
2074 * Added new switches `-unlink' and `-nounlink' to "rmm".
2076 * More cleanups of slocal output. Changed adorn() to
2077 send to stdout, instead of stderr (to match rest of
2080 * Merged mbx_create() into mbx_open, so that creating and
2081 opening a nonexistent maildrop is done atomically. This
2082 removes a bad race condition.
2084 * Fixed bug that caused slocal to be unable to save to MMDF
2087 * Added new wrapper function usr_folder() to slocal.c to
2088 handle adding message to folder (currently, it still uses
2089 usr_pipe() to call rcvstore).
2091 * seq_list() checks for empty folder before scanning for
2092 sequence information.
2094 * num_digits() in flist.c and folder.c now returns correct
2095 value for 0. Also added sanity check.
2097 * folder_delmsgs() now correctly decrements internal message
2100 * Don't attempt to read sequence information if folder
2103 * Split seq_read into seq_public and seq_private.
2105 * Small change to sigmsg.awk, since newer versions of gawk
2106 interpret 034 as octal.
2108 * In flist, don't scan for sequence information in empty folder.
2110 * Updated mhn.defaults.sh to output profile entries for mhshow,
2111 mhstore, and mhbuild.
2113 * Changed configuration parameter "mhn-access-ftp" to
2114 "nmh-access-ftp". Updated man pages
2116 * Moved the code in InitMultipart to reverse the order of the
2117 parts in a multipart, into its own function "reverse_parts()".
2119 * Changed code in mhbuildsbr.c to store unencoded content
2120 in the c_cefile structure when building.
2122 * Changed code in mhoutsbr.c to look for unencoded content
2123 in the c_cefile structure when outputing message.
2125 * Changed configuration parameter "mhn-cache" and
2126 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
2127 since it is used in mhstore, mhlist, and mhshow. Updated man pages
2129 * Change configuration parameter "mhn-storage" to
2130 "nmh-storage", since it is now used in mhstore, mhlist,
2131 and mhshow. Updated man pages
2133 * Add autoconf support for KPOP (kerberized pop).
2135 * Add autoconf support for Hesiod.
2137 * Split routines to output a message given a Content structure
2138 (output_message, output_content, write7Bit, etc..) to a new
2141 * Split output_content(), into output_content() and build_headers().
2143 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
2144 list of header fields, rather than reopening the message.
2146 * Added free_header() to mhfree.c to free structures containing
2147 header field information.
2149 * Changed get_content() to use the linked list of header fields
2150 when parsing the various MIME headers (Content-XXX).
2152 * Changed get_content() to store linked list of header field
2153 values when parsing a content.
2155 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
2156 routines in mhcachesbr.c to handle the content cache.
2158 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
2159 cache_content) into new file mhcachesbr.c.
2161 * More calls to sprintf/strcpy (primarily in mhparse.c
2162 and mhbuildsbr.c) converted to snprintf/strncpy.
2164 * When a message is displayed with `mhshow', it is now
2165 removed from the "unseen" sequence.
2167 * Change the default "showmimeproc" to "mhshow".
2169 * Split "mhn -show" off into separate command "mhshow".
2171 * Split "mhn -store" off into separate command "mhstore".
2173 * Split "mhn -list" off into separate command "mhlist".
2175 * Add sanity checks to context_find(), context_replace(),
2176 and context_del(), to abort if context file hasn't been
2179 * Add calls to context_read(), to the beginning of all nmh
2180 commands (instead of being called indirectly by context_find).
2182 * Changes the "substitute" version of vsnprintf/snprintf for
2183 operating systems without native versions, to just call the
2184 native vsprintf(), and ignore the buffer length. This is
2185 faster, but less secure than the previous version that used
2186 temporary files. This should only be a problem for systems
2187 which do not have a native snprintf(), and require `inc' to
2190 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
2192 * Changes client() routine to take additional parameter, which is
2193 the buffer length of the parameter "response". Then added
2194 buffer length checks for this parameter.
2196 * Changed getws() to get_fields(), since that is apparently the
2197 name of a wide character version of gets() on some archetitures.
2199 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
2201 * Change the code in most of the commands that take multiple
2202 message names/sequences/ranges on the command, such that
2203 the msgs array is expanded dynamically. This removes most
2204 of the limits on the length of command lines.
2206 * Add additional parameter to copyip(), to specify the
2207 maximum number of strings that can be copied (security
2210 * Create new function getarguments(), to massage the argument
2211 vector before parsing it (add any arguments from your
2212 profile to the beginning of the argument vector). This
2213 also removed the general limit on the number of command line
2216 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
2218 * Released nmh-0.27.
2220 * Added a new command "delete", that is available during
2221 a "whatnow" session. It is equivalent to "quit -delete".
2223 * Added another parameter to editfile (in whatnowsbr.c),
2224 that controls whether editfile should remember the last
2225 program that was exec'ed. This way the whatnow command
2226 "mime", will not be re-executed if "edit" is later given
2229 * Changed whatnowsbr.c, so that whatnow doesn't abort if
2230 mhbuild returns an error.
2232 * Added parameter to sendsbr(), so you may specify whether to
2233 rename the draft file.
2235 * Pass delay time to splitmsg() as a parameter, rather than
2236 use a global variable.
2238 * Moved code to rename draft file after sending message from
2239 splitmsg and sendaux, to sendsbr.
2241 * Removed all the code in viamail to split messages and then
2242 mail them. Replaced this with the standard sendsbr.c routines.
2244 * Changed sendsbr(), so that when splitting messages into
2245 messages of type "message/partial", the header fields that
2246 are copied are more compliant with RFC-2046.
2248 * Fixed mhbuild to track temporary files better. They are
2249 now correctly removed when mhbuild aborts.
2251 * Created a new man page for "sendfiles". The information
2252 about "mhn -viamail" in the "mhn" man page was moved to
2255 * Changed the name of the "viamail" shell script to
2256 "sendfiles". Modified "sendfiles" to use the new
2259 * Moved the functionality for "mhn -viamail" out of mhn,
2260 and into a separate executable called "viamail".
2262 * When storing MIME contents to a folder using mhn -store,
2263 they are now accumulated in a temporary file, and then added
2264 to the folder using folder_addmsg().
2266 * Moved code to save content to a folder from store_content
2267 to new function output_content_folder.
2269 * Moved code to save content to file from store_content to
2270 new function output_content_file.
2272 * Moved code to parse storage format string from store_content
2273 to new function parse_format_string.
2275 * Fix copy_some_headers() in mhstoresbr.c, so that the
2276 correct header fields in the first enclosing message/partial
2277 will be copied (according to RFC2046), when using mhn -store
2278 to reassemble messages of type message/partial.
2280 * Fixed bug to openFTP() in mhparse.c, that caused the
2281 tmp file to not be removed, when transferring a
2282 message/external file from ftp.
2284 * Moved the code in mhparse.c to process -auto switch (scan
2285 contents for the attribute "name"), to a new function
2286 "get_storeproc" in mhstoresbr.c.
2288 * Moved routines to free data structures related to MIME
2289 content from mhparse.c and mhbuildsbr.c, to new file
2292 * Moved code to show/display MIME content into new
2295 * Moved code to store MIME content from into
2296 new file mhstoresbr.c
2298 * Moved code to parse MIME content into new
2301 * Moved code to list information about MIME content
2302 into new file mhlistsbr.c.
2304 * Move part_ok(), type_ok(), content_error(), flush_errors(),
2305 and set_endian() to new file mhmisc.c.
2307 * Start to isolate the code to show, list, and store MIME
2308 messages. One side effect is that only one flag (-show,
2309 -list, or -store) can be used at a time now.
2311 * mhn -store -auto wasn't storing file in correct directory.
2313 * Removed a few dead variables from sbr/ruserpass.c
2315 * move code for creating tmp files, and renaming the
2316 the composition draft in mhbuild, from build_mime()
2319 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
2320 the -[no]auto switch (which isn't used in mhbuild).
2322 * split mhn.c into mhn.c and mhnsbr.c (name later changed
2325 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
2327 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
2329 * Released nmh-0.26.
2331 * Added (unlisted) options [no]dashstuffing to send, post,
2332 and whatnow to determine whether to do RFC934 quoting
2333 (dashstuffing) for encapsulated BCC messages. The default
2334 is still the same (dashstuffing).
2336 * Changed the undocumented feature "nodashmunging" in forw
2337 and mhl, into the documented feature "nodashstuffing". The
2338 default for forw, is still "dashstuffing" for backward
2339 compatibility, although I don't believe that bursting
2340 RFC934 digests is very common anymore.
2342 * Added an option to define REALLYDUMB in the default config.h.
2343 But it is not on by default.
2345 * moved creation of config file mts.conf from zotnet/mts
2346 to etc. This simplified the Makefile in zotnet/mts.
2348 * simplified directory support/general to etc.
2350 * removed unneeded directory support/bboards.
2352 * split getusername() into getusername() and getuserinfo().
2354 * Changed getusr() routine to getusername().
2356 * Slight cleanup in folder_pack.c on code that records the new
2357 number of the "cur" message when packing.
2359 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
2361 * Released nmh-0.25.
2363 * Change install process, so that hard linking the correct mts
2364 library to libmts.a, is not necessary. The final link process
2365 uses the original name of the library.
2367 * Fixed bug in flist.c and folder.c, so that symbolic links which
2368 point to directories, will not decrement the number of directory
2371 * Split the function list_content (in mhn.c and mhbuild.c) into
2372 list_content and list_debug.
2374 * Don't pack (folder -pack) an empty folder.
2376 * Exit gracefully in flist.c, if no sequence is specified,
2377 and no "Unseen-Sequence" is given in nmh profile.
2379 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
2381 * Released nmh-0.24.
2383 * Small clarification to the man page for `ali'.
2385 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
2386 are given, that order doesn't matter.
2388 * Fix bug in seq_list.c when realloc'ing for
2389 large sequence line.
2391 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
2393 * Released nmh-0.23.
2395 * Add new section on "Transfer Encodings" to man page for mhbuild.
2397 * In mhbuild.c, split compose_content into compose_content
2398 (parse and execute composition string), and scan_content (scan
2399 content, decided transfer encoding, check for clash with boundary
2400 string). I did a good amount of rearranging of this code.
2402 * Moved definitions for data structures for parsing MIME
2403 messages from mhn.c and mhbuild.c to a new include
2406 * Small amount of rearranging in sendsbr.c
2408 * Small changes to MAIL.FILTERING file.
2410 * Add the file MAIL.FILTERING to nmh distribution.
2412 * Add line to packf so that if message begins with
2413 "X-Envelope-From:" field, it is converted to "From ".
2415 * Fix packf to add "From " line to beginning of message,
2416 even if Return-Path doesn't exist.
2418 * Add note to MACHINES file that on Linux, configure
2419 doesn't find the functions sigsetjmp/siglongjmp.
2421 * Fix configuration for machines that don't have (or find)
2422 sigsetjmp/siglongjmp.
2424 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
2426 * Released nmh-0.22.
2428 * Add a configure check for sigsetjmp. Add some conditional
2429 #define's in h/signals.h in case it's not found.
2431 * Added additional notes about -auto switch in mhn man page.
2433 * Added note about MM_CHARSET environment variable to
2434 mh-profile(5) man page.
2436 * Fix signal problem in mhn.c (change setjmp/longjmp to
2437 sigsetjmp/siglongjmp).
2439 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
2441 * Released nmh-0.22-pre1.
2443 * Changed the first line in mhl.format from
2444 " -- using template mhl.format -- " to a blank line.
2446 * Added note about automimeproc to mh-profile man page.
2448 * Reorganize the main entry point for parsing a MIME message
2449 or file in mhn. Add new function parse_file() as new main
2450 entry point for parsing MIME files.
2452 * Add note to mhn man page, that "mhn -file -" will accept the
2453 source message on the standard input.
2455 * Changed a sanity check in folder_realloc that was too strict.
2457 * -norfc934mode is now the default for mhbuild,
2458 rather than -rfc934mode.
2460 * Fix mhbuild, so that Content-Description and RFC-822 comments
2461 from #forw directive will be correctly included if there is
2464 * Change mhn to correctly default parts of multipart/digest to
2465 message/rfc822 (leftover code from rfc934mode was removed).
2467 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
2470 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
2472 * Released nmh-0.21.
2474 * If the file given to mhbuild is "-", then accept the draft on
2475 standard input, and output the MIME message to standard output.
2477 * Cleaned up code in mhbuild.c that decides what transfer
2480 * Cleaned up code in mhbuild.c that decides what character set
2481 to use for text contents.
2483 * Removed old hpux specific code from zotnet/tws/lexstring.c
2485 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
2487 * Released nmh-0.21-pre2.
2489 * Added the "decode" variable to mhl.format and mhl.header.
2491 * Added new variable "decode" to mhlsbr.c to decode text in
2492 header fields as per RFC-2047.
2494 * Make sure that when decoding RFC-2047 header fields, that any
2495 spaces at the ends of the encoded text are not ignored, but the
2496 spaces between encoded word are.
2498 * Removed #ifdef's for MIME. MIME support is always compiled in.
2500 * scan/inc will now decode both Subject and From lines as
2501 RFC-2047 encoded header fields.
2503 * Added new function write_charset_8bit() to sbr. It returns
2504 the character set to use for 8bit text in composition draft.
2505 Changed mhbuild to use this function.
2507 * Split mhn man page into man pages for mhn and mhbuild.
2509 * mhn -show will only now only use default method for content
2510 of type plain, if it is NOT a part of a multipart/alternative.
2512 * Split mhn -build into mhbuild. Did some code cleanup.
2514 * Added support for %(decode) to fmtdump.c.
2516 * check_charset() now accepts US-ASCII as a subset of any
2517 ISO-8859-X character set.
2519 * Changed the default "showproc" to mhl, instead of the
2522 * When reading file into mhn composition file, only need read
2523 permissions, not write permissions.
2525 * Added own version of strcasecmp to distribution, since
2526 nmh calls it frequently with NULL pointers (ughh).
2528 * Replaced uleq.c with strcasecmp. Removed uleq.c from
2531 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
2533 * Released nmh-0.21-pre1.
2535 * If a message is missing charset parameter to text/plain, show
2536 will assume US-ASCII, rather than just calling showmimeproc.
2538 * Change show.c and mshcmds.c to use check_charset to see if text
2539 message contains valid character set.
2541 * Added new scan format file "scan.nomime" to support/general
2542 that doesn't do any RFC-2047 decoding.
2544 * Modified all the scan format files in support/general to do
2545 RFC-2047 decoding of Subject field.
2547 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
2548 ignore whitespace between two valid encoded words, but not
2549 between an encoded word and normal text.
2551 * Created new file sbr/check_charset.c. Moved code from
2552 fmt_rfc2047.c to check for valid character set to this file.
2554 * Added format escape %(decode) to decode contents of "str" register
2555 as a RFC-2047 header field.
2557 * The command install-mh now recognizes the switches -version
2560 * Added a new argument to print_help.c to decide whether to
2561 print profile entries (needed for install-mh to prevent weird
2564 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
2565 is initialize to max (mp->lowmsg, 1) rather than always 1.
2567 * Changed macros for sequence/attribute manipulation so that
2568 message status array doesn't need to always start at 1.
2570 * Small cleanups in folder_realloc().
2572 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
2574 * Released nmh-0.20.
2576 * Added configure option --with-pager=PAGER.
2578 * Added configure option --with-editor=EDITOR.
2580 * Changed the default format file for mhl (mhl.format) to
2581 also ignore (not display) the header fields Content-Type,
2582 Content-Transfer-Encoding, and Content-ID
2584 * Fixed core dump in addrsbr.c when using %(proper) format function
2585 and the To: line was missing.
2587 * Added the file ZSH.COMPLETION to the distribution.
2589 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
2591 * Released nmh-0.20-pre2.
2593 * Added new switch -snoop to both `msgchk' and `inc', so you can
2594 watch the POP transaction.
2596 * Changed "replgroupcomps" to check for Mail-Followup-To header
2597 first, and use it if available.
2599 * Changed "replcomps" to check for Mail-Reply-To header
2600 first, and use it if available.
2602 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
2604 * Released nmh-0.20-pre1.
2606 * Changed seq_list.c to dynamically enlarge the buffer for
2607 collecting the message ranges in a long sequence line.
2608 This should remove the last hard limit on the size of a
2611 * Changed seq_read.c so that can read long sequence lines.
2612 It will use multiple calls to m_getfld() when m_getfld()
2613 returns the state FLDPLUS.
2615 * Changed brkstring.c to dynamically add more space for pointers
2616 if necessary. This is needed when splitting up large sequence
2619 * Did some small cleanups in seq_save.c.
2621 * Added new switches `-[no]unseen' to rcvstore, to control
2622 whether new messages are added to Unseen-Sequence.
2624 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
2626 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
2627 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
2629 * Changed "replcomps" to not include CC and TO lines so that
2630 that reply message is only directed at the author of the
2631 message to which you are replying.
2633 * Added new switch `-group' to command repl, which causes repl
2634 to use new forms file "replgroupcomps". This is intended for
2635 making group replies.
2637 * Removed #ifdef for ATHENA.
2639 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
2641 * Released nmh-0.19.
2643 * Fix repl,forw so that switch `-form file' will not abort
2644 as ambiguious (silly mistake on my part).
2646 * Cleaned up the mhn man page. Added info about a few escapes
2647 for the formatting/display strings that were not documented
2648 (%%, %t). Moved the BNF grammar for the mime composition file,
2649 to the end of the man page.
2651 * Added the options -[no]format to the command repl. The
2652 switch `-format' will filter the message to which you are
2653 replying with the standard message filter "mhl.reply", which
2654 is now included in the distribution. The `-noformat' option
2655 will negate the use of -format or -filter and not include
2656 the message to which you are replying in the draft.
2658 * Did some cleaning and reorganization on many of the man
2661 * Added debugging switch `-debug' to mhparam, which displays
2662 the values of all `procs' (and some other misc configuration
2663 info) that nmh keeps in global variables.
2665 * When using `refile -preserve', if a conflict occurs, then use
2666 the next available number above the message number you wish
2669 * In forw.c, split the code for creating MIME style forwarding
2670 out of copy_draft, and into copy_mime_draft.
2672 * Move routines in mark.c to print sequences, into new
2673 file sbr/seq_print.c
2675 * flist will now update the current folder.
2677 * Added the switches -[no]fast to flist, to replace
2678 -[no]total. The previous switches are still accepted
2679 but now undocumented.
2681 * More reorganization in flist of the code for
2684 * The command "flist +foo -all" will now scan the folder
2685 "foo" and all its 1st level children.
2687 * Add missing include file <h/mh.h> to sbr/snprintf.c
2689 * Fix alarm bug in rcvtty, so that when it calls external
2690 process, the alarm is never longer than 30 minutes.
2692 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
2694 * Released nmh-0.18.
2696 * Fixed bug in mark, so that "mark -list -seq foo" will
2697 correctly indicate if "foo" is a private sequence. I found
2698 this bug mentioned in Jerry Peek's book.
2700 * Simplified the code in seq_setcur(), since seq_addmsg() now
2701 retains the public/private status of sequences.
2703 * Changed sequence handling so that if the switches -public
2704 or -nopublic, are not specified for the commands mark, pick,
2705 or rcvstore, then existing sequences will retain their
2706 previous public/private status.
2708 * mhparam now handles the mh-sequences profile entry
2711 * flist -all will now also check readonly folders (for
2714 * Improve the leaf optimization for folder command.
2715 It will now track the number of directories in a folder,
2716 and stop stat'ing files once it has hit all the subfolders.
2718 * Renamed m_getfolder to getfolder. Changed getfolder to
2719 take option to determine whether it should get current
2720 folder, or just default folder (Inbox). Changed rcvstore,
2721 inc, and rmf to use the new getfolder.
2723 * flist now indicates if a sequence is private.
2725 * Change WUNTRACED to 0, in pidwait.c, so that commands will
2726 wait for stopped processes.
2728 * conflict will dynamically allocate space for group names,
2729 so it can now handle system with more than 100 groups.
2731 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
2733 * Released nmh-0.18-pre4.
2735 * Check if we have enough message status space, before we
2736 call folder_realloc() in burst, mhpath, and m_draft().
2738 * mhn will now correctly identify a formatting string of "-"
2739 for the option -store, and send content to stdout.
2741 * Change the way that memory for message status is
2742 allocated. It is dynamcially allocated separately from
2743 the folder/message structure. This required changing
2744 folder_read.c, folder_realloc.c, folder_free.c.
2746 * Removed all the MTR code (experimental code for message
2749 * Renamed m_readfolder.c to folder_read.c and simplified
2752 * Renamed m_freefolder.c to folder_free.c.
2754 * Add function trim() to slocal.c to pretty print
2755 the debugging output.
2757 * Changed the name of m_packfolder() to folder_pack().
2758 Changed the name of m_remsg() to folder_realloc().
2760 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
2762 * Released nmh-0.18-pre3.
2764 * Changed installation to add `flists' which is hard linked
2765 to `flist'. This is a equivalent to `flist -all'.
2767 * For flist, -showzero is on by default.
2769 * Major changes to flist. Default is now for flist to search
2770 current folder. The switch `-all' is now used to specify
2771 searching all top level folders. The new switch `-showzero'
2772 is used to print out folders that don't contain any messages
2773 in the given sequence.
2775 * Split BuildFolderList in flist.c into 2 functions
2776 (BuildFolderList, BuildFolderListR). Changed these functions
2777 so that flist now does better leaf optimization, and will stop
2778 stat'ing directory entries when it knows it has hit all the
2779 subdirectories of a given directory.
2781 * Reorganized code in folder.c, so that all relevant folders
2782 are scanned first and information recorded. Then all the
2783 folder summaries at printed out at one time.
2785 * Made the options of folder(s) more orthogonal. Now
2786 "folder -all -noheader -nototal" will do the right thing.
2788 * Added `-noall' switch to folder, for completeness.
2790 * Changed the default mode for creation of new folders
2793 * Slightly changed the format for flist. It now indicates
2794 if a folder is current. Also the width of the various
2795 fields are now calculated at runtime.
2797 * Changed the format for folder(s). Folder names
2798 are now left justified. The width of the various fields
2799 are calculated at runtime.
2801 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
2803 * Released nmh-0.18-pre2.
2805 * Add paragraph to man page for install-mh and to INSTALL file
2806 about checking for global mh.profile.
2808 * Renamed m_find() to context_find().
2809 Renamed m_replace() to context_replace().
2810 Renamed m_delete() to context_del().
2811 Renamed m_update() to context_save().
2812 Renamed m_getdefs() to context_read().
2813 Renamed m_foil() to context_foil().
2815 * Change rcvstore to use routine folder_addmsg(), instead of
2816 adding message to folder itself.
2818 * Changed refile, so that if the switch -preserve is used,
2819 and a conflict occurs for a particular folder, then folder_addmsg()
2820 will just use next highest available number for that folder,
2823 * Make folder_addmsg() more robust. It will make repeated
2824 attempts to link file into folder if link returns with
2827 * Fix bug, so that that if forking sendmail, HELO will be sent
2828 unless clientname: option is defined but empty (so now it
2829 is the same as the direct smtp code).
2831 * Changed sprintb to snprintb (now we pass the buffer length
2832 to new routine). Changed code to use new function.
2834 * Added snprintf to sbr. Added configure check to build it
2835 if you don't have a native version (but haven't changed much
2836 code to use it yet).
2838 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
2840 * Released nmh-0.18-pre1.
2842 * Fixed alarm bug in slocal, so that alarm is never
2843 called with a value larger than 30 mintues.
2845 * Fixed race condition in rmm and refile, so that
2846 context is updated before external rmmproc is called.
2848 * Removed all the OVERHEAD code.
2850 * Move code to add message to folder from refile.c
2853 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
2855 * Did some rearranging of the internals of inc.c.
2857 * Make -inplace the default for anno, forw, dist, and repl.
2859 * Changed --enable-smtp to --with-mts={smtp,sendmail}
2861 * Created new directory mts/sendmail for direct sendmail
2862 interface (although it currently still uses SMTP).
2864 * Removed all the TMA (trusted mail agent) code
2866 * Removed all the TTYD (terminal access daemon) code
2868 * Removed all the MF (uucp filtering) code.
2870 * Removed all the code for BERK.
2872 * Removed all the code for stand-alone delivery (MHMTS).
2874 * Split the file mts/sendmail/smail.c into sendmail.c and
2875 smtp.c. Changed the name of the directory to mts/smtp.
2877 * Changed autoconf to use @sysconfdir@ for location of
2878 configuration files.
2880 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
2882 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
2884 * Released nmh-0.17.
2886 * MAKEDEFS weren't passed down to recursive makes correctly.
2888 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
2889 of hard-coding "/etc/utmp".
2891 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
2894 * Remove configure checks for ulong and ushort. Changed
2895 code to just use unsigned {short, long}.
2897 * Change addmsg function in refile.c to return new
2898 number of refiled message.
2900 * Added check in get_returnpath for empty unixbuf.
2902 * Cleanup of sbr/pidstatus to use more POSIX macros
2903 for return value of wait().
2905 * Change configure to also check /bin for "more".
2907 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
2909 * Released nmh-0.16.
2911 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
2913 * Added automimeproc, which should replace automhnproc.
2915 * multipart messages will no longer abort for messages
2916 of type 8bit or binary (although we still can't really
2917 deal with binary messages, yet).
2919 * Fix double free of c_storage. From John MacMillan.
2921 * mhn now treats unknown subtypes of "text" as text/plain.
2923 * mhn changed so that specifying mhn-show-multipart, or
2924 mhn-show-multipart/{mixed, alternate, etc...) will override
2925 the use of the internal method for displaying these types.
2926 Previously mhn would always use the internal method for subtypes
2927 mixed, alternate, digest, and parallel (even if an alternate
2928 method was specified in mhn.defaults).
2930 * mhn show treats unknown subtypes of multipart, as type
2931 multipart/mixed (as specified RFC2046).
2933 * mhn checks for the parameter "name" rather than "x-name".
2934 From MH-6.8.4 patch.
2936 * Fix double free of ctinfo in user_content when using
2937 #forw with single message. From John MacMillan (and
2940 * Changed -mhnproc switch for show, to -showmimeproc.
2942 * Changed profile entry "mhnproc" to "showmimeproc".
2944 * Added "mime" option to "whatnow", which calls the program
2945 "buildmimeproc" (default is mhn -build) to process MIME
2948 * Added -build switch to mhn, to process MIME composition
2951 * Did some reorganizing of mhn.c.
2953 * Changed casting in mts/sendmail/smail.c from (char) to
2954 (signed char) so SMTP reply codes work correctly for machines
2955 which used unsigned chars by default.
2957 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
2959 * Released nmh-0.15.
2961 * Added new form "scan.unseen" to distribution. It marks messages
2962 which are in any sequence in Unseen-Sequence.
2964 * Do some rearranging of date/time code in zotnet/tws/dtime.c
2966 * Fix sign extension bugs in fmt_scan.c.
2968 * Fix m_atoi.c so that strings ending in non-digit characters
2971 * Split code in burst.c so that finding delimiters of digested
2972 messages and bursting a message into multiple messages are
2973 two separate functions (find_delim and burst).
2975 * Add workaround fo AC_PATH_PROG in configure.in, so
2976 that BSD4.4 machines can find sendmail, vi, more.
2978 * Added "-width" option to rcvtty.
2980 * Change a few variable names in zotnet/mts/client.c since
2981 they conflict with defines on AIX.
2983 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
2984 unsuccessful if resulting file is less than 500 lines long
2985 (rather than 10, which was previous value), since AIX
2986 sed gives mangled file of about 200 lines.
2988 * Extract code in rcvstore.c to link message into folder,
2989 and put in own subroutine.
2991 * Extract code in refile.c to link message into folder,
2992 and put in own subroutine.
2994 * Moved code to remove messages from folder into own
2995 routine "folder_delmsgs" in sbr. Changed rmm.c and
2996 refile.c to use new routine.
2998 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
3000 * Renamed m_seqok to seq_nameok.
3002 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
3005 * Changed m_seqflag to return the number of a sequence rather
3006 than its bit flag. Changed its name to seq_getnum and renamed
3007 file to sbr/seq_getnum.c.
3009 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
3012 * Added zero switch to m_seqadd function to zero out bits before
3013 adding message to sequence.
3015 * Renamed function m_setvis to m_setunseen, and renamed
3016 corresponding file in sbr.
3018 * Renamed function m_setseq to m_setprev, and renamed corresponding
3021 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
3023 * Added new function m_seqdelsel to m_seqdel.c, which deletes
3024 all selected messages from a sequence.
3026 * Added new function m_seqaddsel to m_seqadd.c, which adds all
3027 selected messages to a sequence.
3029 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
3032 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
3034 * Renamed function pack_folder to m_packfolder, and moved it
3035 from uip/folder.c into its own file sbr/m_packfolder.c
3037 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
3039 * Changed function m_gmsg to m_readfolder. Renamed file
3040 sbr/m_gmsg.c to sbr/m_readfolder.c.
3042 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
3044 * Expanded rcvtty man page, and added small patch from
3045 MH-6.8.4 distribution.
3047 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
3049 * Released nmh-0.14.
3051 * Comment out configure test and code for tgetent to allocate its
3052 own termcap buffer when passed a NULL argument.
3054 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
3056 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
3057 to show. Restructured code to handle options to various
3058 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
3059 environment variable.
3061 * Added new man page `mh-draft' which documents the
3062 draft folder facility in nmh.
3064 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
3067 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
3068 fmtcompile.c to fmt_compile.c, and formataddr.c to
3071 * `send -help' wasn't showing the -(no)mime and -split
3074 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
3076 * Released nmh-0.13.
3078 * Changed mhpath so it doesn't abort if a message sequence
3079 such as "mhpath all" expands to more than 1000 messages.
3080 Also mhpath now dynamically reallocated space for message
3081 names (The number of command line arguments is still limited
3084 * Did some general restructuring of the code in folder.c
3085 that checks for folder information, and prints it.
3087 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
3089 * Changed `folder' to reallocate space for folder names if
3090 necessary. So `folders' can now handle more than 300 folders.
3092 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
3094 * Change configure to use a compile check to see if the tm struct
3095 has tm_gmtoff, rather than using egrep.
3097 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
3099 * Released nmh-0.12.
3101 * Had set_exists and unset_exists macros backwards.
3103 * Released nmh-0.11.
3105 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
3107 * Added documentation to mh-profile.man about the various
3108 `procs' (mhlproc, showproc, lproc, etc...).
3110 * Replace the bit twiddling for SELECTED, UNSEEN, and
3111 mp->attrstats with macros.
3113 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
3116 * Change fstat to stat in m_gmsg.c since Linux wants
3119 * Merge Linux patch sent in by Michel Oosterhof (original
3120 patch from bsa@kf8nh.wariat.org).
3122 * Document an undocumented MH feature. mhn -form mhl.null
3123 will suppress the display of the message header.
3125 * mhparam will now return "mhparam etcdir".
3127 * Add catproc to /config/config.c and use that in show.c
3128 and mshcmds.c, rather than hard coding in /bin/cat.
3130 * Add mhnproc to the list of `procs' in mh-profile.man.
3132 * Add configure test for lorder and tsort commands.
3134 * Commented out the padding in the `msgs` struct in h/mh.h
3136 * Change m_gmsg.c to allocate elements to the `info' array by
3137 500 elements at a time (rather than MAXFOLDERS / 5).
3139 * Add note to man page for mhmail that zero length messages are
3140 not sent. Need to use -body "" to send empty messages.
3142 * zotnet/mts/mts.c : compare character with '\0', not NULL.
3144 * sbr/getcpy.c : assign '\0' to character, not NULL.
3146 * add m_fmsg to most programs in uip so that they explicitly free
3147 folder/message structure when done with folder.
3149 * uip/slocal.c : cleanup processing of sender. Make sure it is
3150 defined even if message is missing "From " line.
3152 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
3154 * Released nmh-0.10.
3156 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
3158 * Add configure check for <locale.h>. Turn on LOCALE support
3161 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
3163 * Reversed previous decision to retain "From " lines in slocal.
3164 The "From " line is now removed from all messages.
3166 * inc now saves the date from the "From " envelope in the
3167 Delivery-Date header for all messages.
3169 * sbr/m_getfld.c: Clean up processing of Return-Path and
3170 Delivery-Date from the "From " envelope.
3172 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
3174 * client.c: cast iaddr to int before comparing return value
3175 of inet_addr with NOTOK.
3177 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
3179 * Grep test for signal names was failing on some OS'es because
3180 of missing tabs in regex.
3182 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
3184 * Released nmh-0.09.
3186 * Move config files and format files to *.old before installing.
3188 * Add configure check for killpg.
3190 * msh.c: include <termios.h> instead of <termio.h> and
3193 * prompter.c: don't include <sys/ioctl.h> anymore.
3195 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
3197 * Added `-mime' and `-nomime' options to `repl'.
3200 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
3202 * ruserpass.c : removed conflicting prototypes.
3204 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
3205 by `mesg' command. Previously only worked on BSD machines.
3207 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
3209 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
3210 than hard coded "/etc/utmp".
3212 * Released nmh-0.08.
3214 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
3215 when accessing ndbm/db file for duplicate suppression, instead of
3216 locking database itself.
3218 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
3220 * Added slocal action `mmdf' to deliver to a file in mmdf format.
3222 * Changed the slocal actions `file' and `>' to always deliver in
3223 mbox (uucp) format rather than be determined by RPATHS config
3226 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
3227 rather than mmdf format.
3229 * slocal now adds Delivery-Date field to all messages (previously it
3230 only added it to messages when delivering them to a file). The
3231 "From " line is now retained on all messages if compiling with
3232 RPATHS, rather than being discarded.
3234 * rcvpack no longer adds the Delivery-Date field to messages.
3236 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
3238 * Removed the script packmbox, since it's functionality has been
3241 * Changed packf so that it uses mbox (uucp) format by default
3242 rather than mmdf format. Added options -mbox and -mmdf to
3243 packf so you can choose the preferred format.
3245 * Changed rcvpack so that it uses mbox (uucp) format by default
3246 rather than mmdf format. Added options -mbox and -mmdf to
3247 rcvpack so you can choose the preferred format.
3249 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
3251 * Changed nmh to use dot locking by default (although you
3252 can still easily change this in config.h).
3254 * Simplified locking code. Removed code allowing setting of
3255 locking type in mts.conf. Now the locking type and locking
3256 directory (if any) can only be set at compile time.
3258 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
3260 * Prefer getting timezone information from tm->gmtoff rather
3261 than tzset and external timezone variable.
3263 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
3265 * Fixed typo in ruserpass.c in the variable toktabs.
3267 * When ruserpass was added to LIBOBJS, it was missing
3270 * Released nmh-0.07.
3272 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
3274 * Add check to configure, so that if ruserpass, or _ruserpass
3275 is not found, build version of ruserpass in sbr.
3277 * Added define's to discard.c, m_getfld.c, and scansbr.c so
3278 the code that manipulates internals of stdio, will build
3281 * Added #define to control whether to compile the simple
3282 built-in FTP client in mhn.
3284 * Added configure check for ushort and ulong. Change code
3285 to use ushort/ulong rather than u_short/u_long.
3287 * A couple of small cleanups in locking code.
3289 * Added configure check for gmtoff element in struct tm.
3291 * Added configure check for tzset.
3293 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
3295 * Released nmh-0.06.
3297 * Removed code for machines that don't have socket
3298 interface (how could they get mail anyway?).
3300 * Removed code for BSD41 machines. I don't think there are
3301 many such machines around anymore.
3303 * Add configure check for function uname, and prefer it
3304 over gethostname. General cleanup of zotnet/mts/mts.c.
3306 * Change all `lseek' calls to use POSIX symbolic constants
3307 SEEK_SET, SEEK_CUR, SEEK_END.
3309 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
3311 * Check lex generated file in zotnet/tws and use
3312 pre-generated version if necessary.
3314 * Released nmh-0.05.
3316 * Change to use reliable signals on all platforms that have
3317 sigaction. Change so that interrupted system calls are
3318 restarted for all signals except SIGALRM. This fixes alarm
3319 handling code in smail.c for BSD based systems.
3321 * Added lorder and tsort commands so that created libs can
3322 be linked in one pass.
3324 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
3326 * Changed pidwait so that while it is waiting for a child,
3327 it should block signals rather than ignore them.
3329 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
3331 * Add checks to configure for dbm_open and -lndbm.
3333 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
3335 * folder -pop and folder -push were freeing some memory too
3336 quickly, which caused the entry popped from the stack to not
3337 become the current folder.
3339 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
3341 * Released nmh-0.04.
3343 * Define ospeed and PC in termsbr.c is OS doesn't have
3346 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
3348 * editfile will create a symbolic link to the altmsg if it
3349 can't make a link, on any machine supporting lstat. Formerly
3350 this would happen only on BSD42 based machines.
3352 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
3354 * traverse (in popsbr.c) wasn't calling va_start before using
3355 variable argument list. Fixes core dump in inc when using POP.
3357 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
3359 * The variable pass in remotemail needed to be set to
3360 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
3363 * inc and msgchk were using -rpop by default when configured
3364 with POP support. Default is now -norpop.
3366 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
3368 * By default, post will now give the SMTP HELO command with
3369 the local hostname. If you specify a hostname with the
3370 clientname: option in mts.conf file, post will give the
3371 HELO command with that name instead. If the argument to the
3372 clientname: option is empty, no HELO command is given.
3373 (From the MH-6.8.4 diff)
3375 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
3377 * When using `-help' for a command, it will also print its
3378 profile compents from .mh_profile. (From MH-6.8.4 diff)
3380 * "slocal -file" will now correctly takes its input from
3381 a file (currently need to specify full path).
3383 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
3385 * "slocal -debug" will now issue a warning if a non-blank
3386 line in the .maildelivery file has less than 5 fields.
3388 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
3390 * Changed slocal so that code for duplicate suppression
3391 (MH config was MSGID) is always built. Added the options
3392 -[no]suppressdup to slocal to turn this on/off.
3394 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
3396 * Released nmh-0.03.
3398 * Fixed problem where mark would core dump if no
3399 .mh_sequence file existed.
3401 * Fixed problem where slocal would core dump if -debug
3402 option was given, and certain headers were missing.
3404 * Added patch to slocal to add `folder' (+) action, which
3405 is shorthand for piping message to rcvstore. Updated
3408 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
3410 * Changed flist option -unseen to -[no]all. Cleaned up
3413 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
3415 * Fixed flist. Changed the profile component `Folder-Order'
3416 to `Flist-Order. Added option `-sequence' to flist, so
3417 you can specify the name of the sequence to search for.
3419 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
3421 * A few minor portability cleanups. Changed to use PATH_MAX
3422 rather than MAXPATHLEN. Don't assume ospeed variable exists
3423 in termsbr.c. Removed some conflicting prototypes.
3425 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
3427 * Add configure test to check if tgetent will accept NULL
3428 and allocate its own buffer. Borrowed from zsh.
3430 * Changed libpath to etcpath.
3432 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
3434 * Cleaned up source code and Makefiles, so that if your `make'
3435 supports the VPATH option, you can build nmh in a different
3436 directory from where the source code is located.
3438 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
3440 * Released nmh-0.02.
3442 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
3444 * Split mhook man page into man pages for rcvdist, rcvpack,
3447 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
3449 * Changed code to use strerror, rather than using sys_errlist
3450 and sys_nerr directly.
3452 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
3454 * -compat switch from install-mh removed.
3456 * Changed the default POP port from "pop" to "pop3".
3458 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
3460 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
3461 (again) to mhn.defaults.sh. Changed find_program (again) to
3462 mhn.find.sh. mhn.defaults.sh now takes the search path
3463 as an argument. Default search path is now specified in Makefile
3464 rather than in script.
3466 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
3468 * Changed mtstailor file to mts.conf. Updated man pages.
3470 * Changed si_value to si_val in mhn.c, since it conflicts with
3471 macro defined on Solaris.
3473 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
3475 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
3476 support for Emacs front-end mhe. It is on by default.
3478 * Added the following configure options: --enable-nmh-pop to
3479 enable client side pop support, --enable-nmh-smtp to enable
3480 SMTP support. Client-side pop support now compiles. Man
3481 pages for inc, msgchk, mh-chart now correctly added pop
3484 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
3486 * Added configure test for bug in C libraries where linker
3487 can't find ruserpass, but can find _ruserpass.
3489 * Fixed configure test so that termcap variable ospeed is
3492 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
3494 * Source files converted to ANSI C.
3496 * md5 now compiled separately rather than being included
3497 in mhn.c. Changed md5 to use memset and memcpy.
3499 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
3501 * Collected the error routines adios, advise, admonish, and advertise
3502 into one file (error.c), and did some rearranging of the code.
3504 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
3506 * Added awk script sigmsg.awk (originally written by
3507 Geoff Wing <mason@werple.apana.org.au> for zsh) to
3508 automatically generate signal messages for pidstatus.c.
3509 Added files sbr/signals.c, h/signals.h. Code now uses
3510 sigprocmask to block signals (if available). Code now uses
3511 signal blocking on non-BSD machines.
3513 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
3515 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
3517 * Released nmh-0.01.
3519 * Added configure code to check for type of signals functions
3520 you have (POSIX or BSD style signals). Added function
3521 SIGPROCMASK to simulate sigprocmask on machines that don't
3524 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
3526 * Added -version switch to all commands. Also added to
3529 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
3531 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
3532 POSIX termios.h style functions if present.
3534 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
3536 * Changed support/general/bootmhn.sh to output new mhn_defaults
3537 file to standard output by default (makes it easier for testing).
3538 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
3539 script to find_program.
3541 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
3543 * Added patch to uip/folder.c from exmh distribution to
3544 speed up -recurse option.
3546 * Added flist command from exmh distribution. It doesn't work
3547 yet, but it compiles :-)
3549 * Changed default location for install to
3550 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
3551 and configuration files go in nmh/etc, and support binaries go
3552 in nmh/lib. Of course, all this can now be changed in the top
3555 * Started with mh-6.8.3 as based and converted to autoconf.
3556 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
3557 Pop support and plenty of other things, are now broken.