Rework detection and handling of ndbm: we now check for a working

[mmh] / INSTALL

#
# INSTALL -- installation instructions
#
# $Id$
#

--------------
Installing nmh
--------------
Please read all of the following instructions before you begin
building nmh.

You should check the MACHINES file to see if there are any specific
build instructions for your operating system.  To build nmh, you will
need an ANSI C compiler such as gcc.

1) From the top-level source directory, run the command

   ./configure [options]

   This will check the configuration of your OS, and create the 
   include file config.h, as well as the various Makefiles.

   The configure script accepts various options.  The options of 
   most interest are listed in a section below.  To see the list 
   of all available options, you can run

   ./configure --help

2) Look through the user configuration section at the beginning
   of the generated include file `config.h'. You may
   want to customize some #defines for your environment.

3) make

4) make install

   Note that if you have [n]mh files in your install directories with
   the same names as the files being installed, the old ones will get
   overwritten without any warning.  The only directory that isn't
   true for is the `etc' directory -- in that directory, the previous
   copy of each <file> will be backed up as <file>.prev if it differs
   from the newly-installed copy.  Watch for any diff output while
   make is processing that directory to see if you need to merge
   changes from *.prev files into the new versions.

5) Edit the file `mts.conf' (installed in the nmh `etc' directory)
   and make any necessary changes for the mail transport interface
   you are using.

   The default `mts.conf' file assumes you retrieve new mail from
   a local (or NFS mounted) maildrop, and send outgoing mail by
   injecting the message to a mail transfer agent (such as sendmail)
   on the local machine via SMTP.

   If, instead, all your mail sending and receiving occurs on a 
   remote POP/SMTP server, you will need to look at the values of the 
   variables "localname", "pophost", and "servers":

    a) "localname" defines the hostname that nmh considers local.
       If not set, then nmh queries your OS for this value.  You will
       want to change this if you wish your e-mail to appear as if it
       originated on the POP server.

    b) "pophost" defines the server that runs the POP daemon, and to
       which `inc' and `msgchk' will always query for new mail.

    c) "servers" defines the server to which you send outgoing SMTP
       traffic.

   If you compile with POP support, but don't want to use it exclusively,
   you can use the `-host' and `-user' options to `inc' and `msgchk'
   rather than hardcoding pophost in `mts.conf'.

   Check the `mh-tailor' man page for a list of all the available options
   for this file ("masquerade" may be of particular interest).

6) If you have enabled POP support, make sure that `pop3' (or more
   precisely the value of the define POPSERVICE in config.h) is defined
   in the /etc/services file (or its NIS/NIS+ equivalent) on the client
   machine.  It should be something equivalent to "110/tcp".  This might
   have already been done when the POP daemon was installed.

7) Edit the file `mhn.defaults' (installed in the nmh `etc' directory).
   This file contains the default profile entries for the nmh command
   `mhn' and is created by the script `mhn.defaults.sh'.  This script
   will search a generic path (essentially your $PATH) for programs to
   handle various content types (for example, xv to display images).
   You can re-run this script and give it a more tailored path.  You may
   want to re-run this script later if you install new programs to
   display content.  An example of this is:

    % cd support/general
    % ./mhn.defaults.sh /usr/local/bin:/usr/X11/bin:/usr/ucb > mhn.defaults

   and then move `mhn.defaults' into the nmh `etc' directory.

   The `mhn.defaults.sh' script only searches for a simple set of programs.
   If you have specialized programs to handle various types, you will need
   to edit the `mhn.defaults' file manually.  The syntax of this file is
   described in the man page for `mhn', and in section 9.4 of the book
   "MH & xmh: Email for Users and Programmers", 3rd edition, by Jerry Peek,
   on the Internet at <http://www.ics.uci.edu/~mh/book/mh/confmhn.htm>.

9) Add an optional global mh.profile, if desired.  This profile should be
   placed in the nmh `etc' directory with the name `mh.profile'.  This
   file will be used to construct the initial .mh_profile of a new nmh
   user, but will not be consulted after that.

-----------------------------------------------
Compiler options, or using a different compiler
-----------------------------------------------
By default, configure will use the "gcc" compiler if found.  You can use a
different compiler, or add unusual options for compiling or linking that
the "configure" script does not know about, by either editing the user
configuration section of the top level Makefile (after running configure)
or giving "configure" initial values for these variables by setting them
in the environment.  Using a Bourne-compatible shell (such as sh,ksh,zsh),
 
you can do that on the command line like this:
    CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
 
Or on systems that have the "env" program, you can do it like this:
    env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

----------------------------------------
Building nmh on additional architectures
----------------------------------------
To build nmh on additional architectures, you can do a "make distclean".
This should restore the nmh source distribution back to its original
state.  You can then configure nmh as above on other architectures in
which you wish to build nmh.  Or alternatively, you can use a different
build directory for each architecture.
 
---------------------------------
Using a different build directory
---------------------------------
You can compile the nmh in a different directory from the one containing
the source code.  Doing so allows you to compile it on more than one
architecture at the same time.  To do this, you must use a version of
"make" that supports the "VPATH" variable, such as GNU "make".  "cd" to
the directory where you want the object files and executables to go and
run the "configure" script.  "configure" automatically checks for the
source code in the directory that "configure" is in.  For example,
 
    cd /usr/local/solaris/nmh
    /usr/local/src/nmh-1.0/configure
    make

---------------------
Options for configure
---------------------
--prefix=DIR     (DEFAULT is /usr/local/nmh)
     This will change the base prefix for the installation location
     for the various parts of nmh.  Unless overridden, nmh is installed
     in ${prefix}/bin, ${prefix}/etc, ${prefix}/lib, ${prefix}/man.

--bindir=DIR     (DEFAULT is ${prefix}/bin)
     nmh's binaries (show, inc, comp, ...) are installed here.

--libdir=DIR     (DEFAULT is ${prefix}/lib)
     nmh's support binaries (post, slocal, mhl, ...) are installed here.

--sysconfdir=DIR     (DEFAULT is ${prefix}/etc)
     nmh's config files (mts.conf, mhn.defaults, ...) are installed here.

--mandir=DIR     (DEFAULT is ${prefix}/man)
     nmh's man pages are installed here.

--enable-debug
     Enable debugging support.

--enable-masquerade[='draft_from mmailid username_extension']    
     If this option is not specified, the mts.conf file will contain the line
     "masquerade: " (with no value), which may be manually edited later.  You
     may find it convenient to specify a value at configure-time, however, so
     that each time nmh is reinstalled, the right value will be there.

     The above usage shows all three masquerade options being specified, but any
     subset of the three may be specified.  If you do want to enable all three,
     you can simply use `configure --enable-masquerade' as a shortcut.

     See the mh-tailor(5) man page for full documentation of "masquerade:".

--enable-mhe    (DEFAULT)
     Add support for the Emacs front-end `mhe'.

--enable-pop
     Enable client-side support for pop.

--enable-apop
     Enable client-side support for apop (Authenticated POP).

--with-editor=EDITOR  (DEFAULT is vi)
     specify the full path of the default editor to use.  If this
     option is not given, then the configuration process will search
     for the `vi' command and use it as the default.  If you wish to
     specify an interface which is compatible with MH, then use the
     nmh command `prompter'.  If you specify `prompter', then you don't
     need to give the full pathname.

--with-hesiod=PREFIX
     Specify the location of Hesiod.

--with-krb4=PREFIX
     Specify the location of Kerberos V4 for KPOP support. After
     running configure, you will need to change the POPSERVICE #define in
     config.h if you want to use KPOP exclusively (rather than being able
     to switch between KPOP and normal POP3).  See the comments inside
     config.h for details.

--with-locking=LOCKTYPE    (DEFAULT is dot)
     Specify the locking mechanism when attempting to "inc" or
     "msgchk" a local mail spool. Valid options are "dot",
     "fcntl", "flock", and "lockf". Of the four, dot-locking
     requires no special kernel or filesystem support, and simply
     creates a file called "FILE.lock" to indicate that "FILE" is
     locked.

     In order to be effective, you should contact the site
     administrator to find out what locking mechanisms other
     mail delivery and user programs respect. The most common
     reason not to use dot-locking is if the mail spool directory
     is not world- or user-writeable, and thus a lock file cannot
     be created.

--with-mts=MTS   (DEFAULT is smtp)
     Specify the default mail transport system you want to use.  The two
     acceptable options are "smtp" (which is the default), and
     "sendmail".  This value will be put into the mts.conf file.  You
     may find it convenient to specify a value at configure-time,
     however, so that each time nmh is reinstalled, the right value will
     be there.

     If you use "smtp", this will enable a direct SMTP (simple mail
     transport protocol) interface in nmh.  When sending mail, instead
     of passing the message to the mail transport agent, `post' will
     open a socket connection to the mail port on the machine specified
     in the `mts.conf' file (default is localhost), and speak SMTP
     directly.

     If you use "sendmail", then `post' will send messages by forking a
     local copy of sendmail.  Currently it will still speak SMTP with
     this local copy of sendmail.

     If you wish to use a transport agent other than sendmail, you will
     need to use a `sendmail wrapper'.

--with-ndbm=LIB    (DEFAULT is to autodetect)
--with-ndbmheader=HEADER     (DEFAULT is to autodetect)
     Specify the header file (eg ndbm.h) and library (eg ndbm) to use
     to compile against the ndbm database library. By default, configure
     will try various possibilities until it finds one that works; this
     option only needs to be specified if the autodetection fails or
     makes the wrong choice.

     If either of these options is given then the other must also be
     specified.

--with-pager=PAGER    (DEFAULT is more)
     Specify the default pager (file lister) to use.  If this option
     is not given, then the configuration process will search for the
     command `more' and use it as the default.

--with-smtpservers='SMTPSERVER1[ SMTPSERVER2...]'    (DEFAULT is localhost)
     If this option is not specified, the mts.conf file will contain
     the line "servers: localhost", which may be manually edited later.
     You may find it convenient to specify a value at configure-time,
     however, so that each time nmh is reinstalled, the right value will be
     there.

     See the mh-tailor(5) man page for full documentation of "servers:".

--
The nmh team
nmh-workers@nongnu.org