1 /* config.h.in. Generated automatically from configure.in by autoheader. */
3 /****** BEGIN USER CONFIGURATION SECTION *****/
6 * IMPORTANT: You should no longer need to edit this file to handle
7 * your operating system. That should be handled and set correctly by
10 * These are slowly being phased out, but currently
11 * not everyone is auto-configured. Then decide if you
12 * wish to change the features that are compiled into nmh.
16 * Define to 1 if you need to make `inc' set-group-id
17 * because your mail spool is not world writable. This
18 * will add some extra security checks, although I can't
19 * guarantee it is safe. Also, you will need to change the
20 * group and add the setgid bit to `inc' manually after
23 /* #define MAILGROUP 1 */
26 * Turn on locale (setlocale) support
31 * Define to 1 the type of file locking to use. You need to
32 * make sure the type of locking you use is compatible with
33 * other programs which may modify your maildrops.
34 * Currently you can only use one type.
37 /* #define FCNTL_LOCKING 1 */
38 /* #define LOCKF_LOCKING 1 */
39 /* #define FLOCK_LOCKING 1 */
42 * If you have defined DOT_LOCKING, then the default is to
43 * place the lock files in the same directory as the file that
44 * is to be locked. Alternately, if you define LOCKDIR, you
45 * can specify that all lock files go in a specific directory.
46 * Don't define this unless you know you need it.
48 /* #define LOCKDIR "/usr/spool/locks" */
51 * Define this if your passwords are stored in some type of
52 * distributed name service, such as NIS, or NIS+.
57 * Directs nmh not to try and rewrite addresses
58 * to their official form. You probably don't
59 * want to change this without good reason.
64 * Define this if you do not want nmh to attach the local hostname
65 * to local addresses. You must also define DUMB. You probably
66 * dont' need this unless you are behind a firewall.
68 /* #define REALLYDUMB 1 */
71 * Directs inc/slocal to extract the envelope sender from "From "
72 * line. If inc/slocal is saving message to folder, then this
73 * sender information is then used to create a Return-Path
74 * header which is then added to the message.
79 * If defined, slocal will use `mbox' format when saving to
80 * your standard mail spool. If not defined, it will use
86 * If this is defined, nmh will recognize the ~ construct.
91 * Compile simple ftp client into mhn. This will be used by mhn
92 * for ftp access unless you have specified another access method
93 * in your .mh_profile or mhn.defaults. Use the "mhn-access-ftp"
94 * profile entry to override this. Check mhn(1) man page for
100 * If you enable POP support, this is the the port name
101 * that nmh will use. Make sure this is defined in your
102 * /etc/services file (or its NIS/NIS+ equivalent). If you
103 * are using KPOP, you will probably need to change this
106 #define POPSERVICE "pop3"
109 * Define the default creation modes for folders and messages.
111 #define DEFAULT_FOLDER_MODE "0700"
112 #define DEFAULT_MESSAGE_MODE "0600"
115 * The prefix which is prepended to the name of messages when they
116 * are "removed" by rmm. This should typically be `,' or `#'
118 #define BACKUP_PREFIX ","
121 * Name of link to file to which you are replying.
126 * If wait/waitpid returns an int (no union wait).
130 /***** END USER CONFIGURATION SECTION *****/
132 /* Define to empty if the keyword does not work. */
135 /* Define to `int' if <sys/types.h> doesn't define. */
138 /* Define if your struct stat has st_blksize. */
139 #undef HAVE_ST_BLKSIZE
141 /* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
142 #undef HAVE_SYS_WAIT_H
144 /* Define if you have <vfork.h>. */
147 /* Define to `int' if <sys/types.h> doesn't define. */
150 /* Define to `long' if <sys/types.h> doesn't define. */
153 /* Define to `int' if <sys/types.h> doesn't define. */
156 /* Define as the return type of signal handlers (int or void). */
159 /* Define to `unsigned' if <sys/types.h> doesn't define. */
162 /* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
163 #undef STAT_MACROS_BROKEN
165 /* Define if you have the ANSI C header files. */
168 /* Define on System V Release 4. */
171 /* Define if you can safely include both <sys/time.h> and <time.h>. */
172 #undef TIME_WITH_SYS_TIME
174 /* Define to `int' if <sys/types.h> doesn't define. */
177 /* Define vfork as fork if vfork does not work. */
180 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
183 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
186 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS -- does
187 * PicoBSD have uname? :) */
191 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS */
194 /* Defined for SCO5 */
197 /* Defined for Linux */
201 * Define this if you want SMTP (simple mail transport protocol)
202 * support. When sending mail, instead of passing the message to
203 * the mail transport agent (typically sendmail), nmh will open a
204 * socket connection to the mail port on the machine specified in
205 * the `mts.conf' file (default is localhost), and speak SMTP directly.
210 * Use sendmail as transport agent. Post messages by piping
211 * them directly to sendmail.
216 * Define this to compile client-side support for pop into
217 * inc and msgchk. Do not change this value manually. You
218 * must run configure with the '--enable-nmh-pop' option
219 * to correctly build the pop client support.
224 * Define this to compile client-side support for kpop
225 * (kerberized pop) into inc and msgchk. Do not change this
226 * value manually. You must run configure with the option
227 * '--with-krb4=PREFIX' to correctly build the kpop client support.
232 * Define this to "pop" when using Kerberos V4
234 #undef KPOP_PRINCIPAL
237 * Define this to compile support for using Hesiod to locate
238 * pop servers into inc and msgchk. Do not change this value
239 * manually. You must run configure with the option
240 * '--with-hesiod=PREFIX' to correctly build Hesiod support.
245 * Compile in support for the Emacs front-end mh-e.
249 /* Define to 1 if your termcap library has the ospeed variable */
251 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */
252 #undef MUST_DEFINE_OSPEED
254 /* Define to 1 if you have reliable signals */
255 #undef RELIABLE_SIGNALS
257 /* Define to 1 if you use POSIX style signal handling */
261 /* Define to 1 if you use BSD style signal handling (and can block signals) */
265 /* Define to 1 if you use SYS style signal handling (and can block signals) */
269 /* Define to 1 if you have no signal blocking at all (bummer) */
270 #undef NO_SIGNAL_BLOCKING
272 /* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
276 * Define to 1 if your vi has ATT bug, such that it returns
277 * non-zero exit codes on `pseudo-errors'.
281 /* Define ruserpass as _ruserpass if your libraries have a bug *
282 * such that it can't find ruserpass, but can find _ruserpass. */
285 /* Define if your system defines TIOCGWINSZ in sys/ioctl.h. */
286 #undef GWINSZ_IN_SYS_IOCTL
288 /* Define if your system defines `struct winsize' in sys/ptem.h. */
289 #undef WINSIZE_IN_PTEM
291 /* Define to 1 if struct tm has gmtoff */
292 #undef HAVE_TM_GMTOFF
294 /* Define if your system has sigsetjmp */
295 #undef HAVE_SIGSETJMP
297 /* Define if you have the killpg function. */
300 /* Define if you have the lstat function. */
303 /* Define if you have the mkstemp function. */
306 /* Define if you have the sigaction function. */
307 #undef HAVE_SIGACTION
309 /* Define if you have the sigblock function. */
312 /* Define if you have the sighold function. */
315 /* Define if you have the sigprocmask function. */
316 #undef HAVE_SIGPROCMASK
318 /* Define if you have the sigrelse function. */
321 /* Define if you have the sigsetmask function. */
322 #undef HAVE_SIGSETMASK
324 /* Define if you have the snprintf function. */
327 /* Define if you have the strdup function. */
330 /* Define if you have the strerror function. */
333 /* Define if you have the tzset function. */
336 /* Define if you have the uname function. */
339 /* Define if you have the wait3 function. */
342 /* Define if you have the waitpid function. */
345 /* Define if you have the writev function. */
348 /* Define if you have the <arpa/ftp.h> header file. */
349 #undef HAVE_ARPA_FTP_H
351 /* Define if you have the <arpa/inet.h> header file. */
352 #undef HAVE_ARPA_INET_H
354 /* Define if you have the <crypt.h> header file. */
357 /* Define if you have the <dirent.h> header file. */
360 /* Define if you have the <errno.h> header file. */
363 /* Define if you have the <fcntl.h> header file. */
366 /* Define if you have the <limits.h> header file. */
369 /* Define if you have the <locale.h> header file. */
372 /* Define if you have the <memory.h> header file. */
375 /* Define if you have the <ndir.h> header file. */
378 /* Define if you have the <stdlib.h> header file. */
381 /* Define if you have the <string.h> header file. */
384 /* Define if you have the <sys/dir.h> header file. */
385 #undef HAVE_SYS_DIR_H
387 /* Define if you have the <sys/ndir.h> header file. */
388 #undef HAVE_SYS_NDIR_H
390 /* Define if you have the <sys/param.h> header file. */
391 #undef HAVE_SYS_PARAM_H
393 /* Define if you have the <sys/time.h> header file. */
394 #undef HAVE_SYS_TIME_H
396 /* Define if you have the <sys/utsname.h> header file. */
397 #undef HAVE_SYS_UTSNAME_H
399 /* Define if you have the <termcap.h> header file. */
400 #undef HAVE_TERMCAP_H
402 /* Define if you have the <termio.h> header file. */
405 /* Define if you have the <termios.h> header file. */
406 #undef HAVE_TERMIOS_H
408 /* Define if you have the <unistd.h> header file. */
411 /* Define if you have the m library (-lm). */
414 /* Define if you have the mkstemp library (-lmkstemp). */
415 #undef HAVE_LIBMKSTEMP
417 /* Define if you have the ndbm library (-lndbm). */
420 /* Define if you have the nsl library (-lnsl). */
423 /* Define if you have the resolv library (-lresolv). */
424 #undef HAVE_LIBRESOLV
426 /* Define if you have the socket library (-lsocket). */
427 #undef HAVE_LIBSOCKET