2 dnl configure.in -- autoconf template for nmh
8 AC_CONFIG_HEADER(config.h)
12 dnl ---------------------
13 dnl define a macro or two
14 dnl ---------------------
16 AC_DEFUN(NMH_PROG_GNU_LIBTOOL, [
17 tmptest=`$LIBTOOL --version 2>&1 | grep GNU`
18 if test x"$tmptest" != x ; then
20 AC_SUBST(GNU_LIBTOOL)dnl
25 dnl What version of nmh are we building?
26 VERSION=`sed -e 's/nmh-//' ${srcdir}/VERSION`
27 echo "configuring for nmh-$VERSION"
30 dnl --------------------------
31 dnl CHECK COMMAND LINE OPTIONS
32 dnl --------------------------
34 dnl Do you want client-side support for apop?
36 [ --enable-apop enable client-side support for POP3 and APOP])
37 if test x"$enable_apop" = x"yes"; then
44 dnl Do you want to debug nmh?
47 [ --enable-debug enable nmh code debugging])
48 dnl The old redundant --enable-nmh-debug is deprecated and undocumented.
49 if test x"$enable_nmh_debug" = x"yes"; then
53 dnl Allow users to send email from addresses other than their default?
54 undefine([masquerade])dnl
55 AC_ARG_ENABLE(masquerade,
56 [ --enable-masquerade[='draft_from mmailid username_extension']
57 enable up to 3 types of address masquerading [none]],
58 [if test x"$enable_masquerade" = x"yes"; then
59 masquerade="draft_from mmailid username_extension"
61 masquerade="$enable_masquerade"
63 AC_SUBST(masquerade)dnl
65 dnl Do you want mhe support?
68 [ --enable-mhe enable mhe support (DEFAULT)])
70 dnl mhe support is on by default, so define it unless --disable-mhe or the
71 dnl deprecated, undocumented --disable-nmh-mhe are specified.
72 if test x"$enable_mhe" != x"no" -a x"$enable_nmh_mhe" != x"no"; then
76 dnl Do you want client-side support for pop?
79 [ --enable-pop enable client-side support for plain POP3])
80 dnl The old redundant --enable-nmh-pop is deprecated and undocumented.
81 if test x"$enable_nmh_pop" = x"yes"; then
85 dnl Do you want support for hesiod
87 [ --with-hesiod=PREFIX specify location of Hesiod])
88 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
92 dnl Do you want client-side support for kpop
94 [ --with-krb4=PREFIX specify location of Kerberos V4 for KPOP support])
95 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
98 AC_DEFINE(KPOP_PRINCIPAL, "pop")dnl
101 dnl After we know if we're including apop and kpop support, do pop stuff
102 if test x"$enable_pop" = x"yes"; then
105 POPSED='/^%nmhbeginpop%/d;/^%nmhendpop%/d'
107 POPSED='/^%nmhbeginpop%/,/^%nmhendpop%/d'
112 dnl What should be the default editor?
113 undefine([editor])dnl
115 [ --with-editor=EDITOR specify the default editor])
117 if test -n "$with_editor"; then
118 editorpath="$with_editor"
121 dnl What method of posting should post use?
124 [ --with-mts=MTS specify the mail transport agent/service])
126 if test x"$with_mts" = x"smtp"; then
128 MTSLIB="mts/smtp/libsmtp.a"
129 AC_DEFINE(SMTPMTS)dnl
130 elif test x"$with_mts" = x"sendmail"; then
132 MTSLIB="mts/sendmail/libsend.a"
133 AC_DEFINE(SENDMTS)dnl
136 MTSLIB="mts/smtp/libsmtp.a"
137 AC_DEFINE(SMTPMTS)dnl
143 dnl What should be the default pager?
146 [ --with-pager=PAGER specify the default pager])
148 if test -n "$with_pager"; then
149 pagerpath="$with_pager"
152 dnl What should be the default mail server(s)?
153 undefine([smtpservers])dnl
154 AC_ARG_WITH(smtpservers,
155 [ --with-smtpservers='SMTPSERVER1[ SMTPSERVER2...]'
156 specify the default SMTP server(s) [localhost]])
157 if test -n "$with_smtpservers"; then
158 smtpservers="$with_smtpservers"
160 smtpservers="localhost"
162 AC_SUBST(smtpservers)dnl
164 dnl ----------------------------------------------------
165 dnl Default location is /usr/local/nmh/{bin,etc,lib,man}
166 dnl ----------------------------------------------------
167 AC_PREFIX_DEFAULT(/usr/local/nmh)
169 dnl ------------------
170 dnl CHECK THE COMPILER
171 dnl ------------------
172 dnl We want these before the checks,
173 dnl so the checks can modify their values.
174 test -z "$CFLAGS" && CFLAGS= auto_cflags=1
175 if test x"$enable_debug" = x"yes"; then
176 test -z "$LDFLAGS" && LDFLAGS=-g
181 dnl if the user hasn't specified CFLAGS, then
182 dnl if compiler is gcc, then
183 dnl use -O2 and some warning flags
185 if test -n "$auto_cflags"; then
186 if test x"$enable_debug" = x"yes"; then
187 if test -n "$GCC"; then
188 test -z "$CFLAGS" && CFLAGS="-Wall -g" || CFLAGS="$CFLAGS -Wall -g"
190 test -z "$CFLAGS" && CFLAGS=-g || CFLAGS="$CFLAGS -g"
193 test -z "$LDFLAGS" && LDFLAGS=-s
194 if test -n "$GCC"; then
195 test -z "$CFLAGS" && CFLAGS="-Wall -O2" || CFLAGS="$CFLAGS -Wall -O2"
197 test -z "$CFLAGS" && CFLAGS=-O || CFLAGS="$CFLAGS -O"
202 AC_C_CONST dnl Does compiler support `const'.
204 dnl ------------------
205 dnl CHECK FOR PROGRAMS
206 dnl ------------------
207 AC_PROG_MAKE_SET dnl Does make define $MAKE
208 AC_PROG_INSTALL dnl Check for BSD compatible `install'
209 AC_PROG_RANLIB dnl Check for `ranlib'
210 AC_PROG_AWK dnl Check for mawk,gawk,nawk, then awk
211 AC_PROG_LEX dnl Check for lex/flex
214 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
215 AC_PATH_PROG(cutpath, cut, no, [$pathtmp])
218 dnl try to figure out which one we've got
219 AC_CHECK_PROG(LIBTOOL, libtool, libtool, , [$pathtmp])
222 dnl Check for lorder and tsort commands
223 AC_CHECK_PROG(LORDER, lorder, lorder, no)dnl
224 AC_CHECK_PROG(TSORT, tsort, tsort, no)dnl
226 dnl If either doesn't exist, replace them with echo and cat
227 if test x$ac_cv_prog_LORDER != xlorder -o x$ac_cv_prog_TSORT != xtsort; then
232 dnl Mac OS X has lorder, but sh is too broken for it to work
233 dnl elif test -z "`lorder config/config.c 2>&1 | grep config/config.c`" ; then
236 dnl AC_SUBST(LORDER)dnl
237 dnl AC_SUBST(TSORT)dnl
241 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
242 AC_PATH_PROG(lspath, ls, no, [$pathtmp])
244 dnl See how we get ls to display the owner and the group
245 if test "$lspath" != "no"; then
246 AC_CACHE_CHECK(how to get ls to show us the group ownership of a file,
248 [if test x"`$lspath -dl / | $AWK '{print $9}'`" = x"/"; then
249 dnl There were 9 parameters, so unless this is a really bizarre, nonstandard
250 dnl ls, it would seem -l gave us both the user and group. On this type of
251 dnl ls, -g makes _only_ the group be displayed (and not the user).
252 nmh_cv_ls_grpopt="-l"
254 dnl Looks like -l only gave us the user, so we need -g to get the group too.
255 nmh_cv_ls_grpopt="-lg"
260 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
261 AC_PATH_PROG(morepath, more, no, [$pathtmp])
263 dnl If pager is not specified yet,
264 dnl then use `more' as the default.
265 if test -z "$pagerpath"; then
266 pagerpath="$morepath"
268 AC_SUBST(pagerpath)dnl
270 dnl Look for `sendmail'
271 pathtmp=/usr/lib:/usr/sbin:/usr/etc:/usr/ucblib:/usr/bin:/bin
272 AC_PATH_PROG(sendmailpath, sendmail, no, [$pathtmp])
275 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
276 AC_PATH_PROG(vipath, vi, no, [$pathtmp])
278 dnl If editor is not specified yet,
279 dnl then use `vi' as the default.
280 if test -z "$editorpath"; then
283 AC_SUBST(editorpath)dnl
285 dnl Check for broken vi
286 AC_CACHE_CHECK(for broken vi, nmh_cv_attvibug,
287 [if echo 'r /nonexist-file
288 q' | ex > /dev/null 2>&1
295 if test "$nmh_cv_attvibug" = yes; then
296 AC_DEFINE(ATTVIBUG)dnl
299 dnl ----------------------------------------------------------
300 dnl FIND MAIL SPOOL AND SEE IF WE NEED TO MAKE inc SETGID MAIL
301 dnl ----------------------------------------------------------
302 AC_CACHE_CHECK(where mail spool is located, nmh_cv_mailspool,
303 [for mailspool in /var/mail dnl
306 /dev/null; dnl Just in case we fall through
308 test -d $mailspool && break
310 nmh_cv_mailspool=$mailspool
312 mailspool=$nmh_cv_mailspool
313 AC_SUBST(mailspool)dnl
315 dnl See whether the mail spool directory is world-writable.
316 if test "$lspath" != "no" -a "$cutpath" != "no"; then
317 AC_CACHE_CHECK(whether the mail spool is world-writable,
318 nmh_cv_mailspool_world_writable,
319 [if test "`$lspath -dlL $mailspool | $cutpath -c9`" = "-"; then
320 nmh_cv_mailspool_world_writable=no
322 nmh_cv_mailspool_world_writable=yes
326 dnl ...If it's not, we need to #define MAILGROUP to 1 and make inc setgid.
327 if test x"$nmh_cv_mailspool_world_writable" = x"no"; then
328 dnl do we really need both of these?
329 AC_DEFINE(MAILGROUP)dnl
332 AC_SUBST(SETGID_MAIL)dnl
334 dnl Use ls to see which group owns the mail spool directory.
335 AC_CACHE_CHECK(what group owns the mail spool, nmh_cv_ls_mail_grp,
336 [nmh_cv_ls_mail_grp=`$lspath -dL $nmh_cv_ls_grpopt $mailspool|$AWK '{print $4}'`
338 MAIL_SPOOL_GRP=$nmh_cv_ls_mail_grp
339 AC_SUBST(MAIL_SPOOL_GRP)dnl
341 dnl ------------------
342 dnl CHECK HEADER FILES
343 dnl ------------------
349 AC_CHECK_HEADERS(string.h memory.h stdlib.h unistd.h errno.h fcntl.h \
350 limits.h crypt.h termcap.h termio.h termios.h locale.h \
351 netdb.h sys/param.h sys/time.h sys/utsname.h arpa/inet.h \
355 AC_CACHE_CHECK(POSIX termios, nmh_cv_sys_posix_termios,
356 [AC_TRY_LINK([#include <sys/types.h>
358 #include <termios.h>],
359 [/* SunOS 4.0.3 has termios.h but not the library calls. */
361 nmh_cv_sys_posix_termios=yes, nmh_cv_sys_posix_termios=no)])
363 if test $nmh_cv_sys_posix_termios = yes; then
364 AC_CACHE_CHECK(TIOCGWINSZ in termios.h,
365 nmh_cv_header_termios_h_tiocgwinsz,
366 [AC_TRY_LINK([#include <sys/types.h>
367 #include <termios.h>],
368 [int x = TIOCGWINSZ;],
369 nmh_cv_header_termios_h_tiocgwinsz=yes,
370 nmh_cv_header_termios_h_tiocgwinsz=no)])
372 nmh_cv_header_termios_h_tiocgwinsz=no
375 if test $nmh_cv_header_termios_h_tiocgwinsz = no; then
376 AC_CACHE_CHECK(TIOCGWINSZ in sys/ioctl.h,
377 nmh_cv_header_sys_ioctl_h_tiocgwinsz,
378 [AC_TRY_LINK([#include <sys/types.h>
379 #include <sys/ioctl.h>],
380 [int x = TIOCGWINSZ;],
381 nmh_cv_header_sys_ioctl_h_tiocgwinsz=yes,
382 nmh_cv_header_sys_ioctl_h_tiocgwinsz=no)])
383 if test $nmh_cv_header_sys_ioctl_h_tiocgwinsz = yes; then
384 AC_DEFINE(GWINSZ_IN_SYS_IOCTL)
389 dnl Checks for _IO_write_ptr. A Linuxism used by nmh on linux. We
390 dnl really use a whole set of them, but this check should be
393 AC_CHECK_HEADER(libio.h, [
394 AC_EGREP_HEADER(_IO_write_ptr, libio.h, [
395 AC_DEFINE(LINUX_STDIO) ]) ])
397 AC_CHECK_HEADER([sys/ptem.h], AC_DEFINE(WINSIZE_IN_PTEM))
403 AC_CHECK_LIB(mkstemp,mkstemp)
404 AC_CHECK_FUNCS(waitpid wait3 sigaction sigprocmask sigblock sigsetmask \
405 sighold sigrelse writev lstat uname tzset killpg mkstemp \
408 dnl solaris screws this up
409 AC_CHECK_FUNC(gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)],
410 AC_CHECK_LIB(nsl, gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)] ) )
412 dnl sigsetjmp may be a macro
413 AC_MSG_CHECKING(for sigsetjmp)
414 AC_TRY_LINK([#include <setjmp.h>], [sigsetjmp((void *)0, 0);],
415 [AC_DEFINE(HAVE_SIGSETJMP) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no))
417 AC_REPLACE_FUNCS(snprintf strerror strdup)
419 dnl Look for the initgroups() declaration. On AIX 4.[13], Solaris 4.1.3, and
420 dnl ULTRIX 4.2A the function is defined in libc but there's no declaration in
421 dnl any system header.
423 dnl On Solaris 2.[456], the declaration is in <grp.h>. On HP-UX 9-11 and
424 dnl (reportedly) FreeBSD 3.[23], it's in <unistd.h>. Any other locations we
426 AC_EGREP_HEADER(initgroups, grp.h, AC_DEFINE(INITGROUPS_HEADER, <grp.h>),
427 AC_EGREP_HEADER(initgroups, unistd.h,
428 AC_DEFINE(INITGROUPS_HEADER, <unistd.h>)))
430 dnl On AIX 4.1, snprintf() is defined in libc.a but there's no prototype in
431 dnl <stdio.h> or elsewhere. Apparently it's not officially supported (though it
432 dnl seems to work perfectly and IBM apparently uses it in internal code).
433 dnl Anyhow, if we omit our own snprintf() and vsnprintf() prototypes when we
434 dnl HAVE_SNPRINTF, we get a billion warnings at compile time. Use the C
435 dnl preprocessor to preprocess stdio.h and make sure that there's actually a
437 AC_EGREP_HEADER(snprintf, stdio.h, AC_DEFINE(HAVE_SNPRINTF_PROTOTYPE))
439 dnl -------------------
440 dnl CHECK FOR LIBRARIES
441 dnl -------------------
442 dnl Check location of modf
443 AC_CHECK_FUNC(modf, , AC_CHECK_LIB(m, modf))
445 dnl Checks for network libraries (nsl, socket)
448 termcap_curses_order="termcap curses ncurses"
449 for lib in $termcap_curses_order; do
450 AC_CHECK_LIB(${lib}, tgetent, [TERMLIB="-l$lib"; break])
459 AC_CHECK_FUNC(dbm_open, ,
460 AC_CHECK_LIB(ndbm, dbm_open, ,
461 AC_CHECK_LIB(dbm, dbm_open)))
466 AC_CHECK_HEADERS(db1/ndbm.h)
471 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
472 if test x"$with_hesiod" != x"yes"; then
473 HESIOD_INCLUDES="-I$with_hesiod/include"
474 HESIOD_LIBS="-L$with_hesiod/lib"
476 AC_CHECK_FUNC(res_send, ,
477 AC_CHECK_LIB(resolv, res_send))
478 AC_CHECK_LIB(hesiod, hes_resolve, [HESIOD_LIBS="$HESIOD_LIBS -lhesiod"],
479 [AC_MSG_ERROR(Hesiod library not found)], $HESIOD_LIBS)
481 AC_SUBST(HESIOD_INCLUDES)dnl
482 AC_SUBST(HESIOD_LIBS)dnl
484 dnl ----------------------------------
485 dnl CHECK FOR KRB4 (Kerberos4 support)
486 dnl ----------------------------------
487 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
488 if test x"$with_krb4" != x"yes"; then
489 KRB4_INCLUDES="-I$with_krb4/include"
490 if test -d "$with_krb4/include/kerberosIV"; then
491 KRB4_INCLUDES="$KRB4_INCLUDES -I$with_krb4/include/kerberosIV"
493 KRB4_LIBS="-L$with_krb4/lib"
494 elif test -d /usr/include/kerberosIV; then
495 KRB4_INCLUDES="-I/usr/include/kerberosIV"
497 AC_CHECK_LIB(krb4, krb_rd_req,
498 [KRB4_LIBS="$KRB4_LIBS -lkrb4 -ldes425 -lkrb5 -lcrypto -lcom_err"],
499 [AC_CHECK_LIB(krb, krb_rd_req,
500 [KRB4_LIBS="$KRB4_LIBS -lkrb -ldes"],
501 [AC_MSG_ERROR(Kerberos 4 libraries not found)],
503 $KRB4_LIBS -ldes425 -lkrb5 -lcrypto -lcom_err)
505 AC_SUBST(KRB4_INCLUDES)dnl
506 AC_SUBST(KRB4_LIBS)dnl
508 dnl ---------------------
509 dnl CHECK TERMCAP LIBRARY
510 dnl ---------------------
512 dnl Add the termcap library, so that the following configure
513 dnl tests will find it when it tries to link test programs.
514 nmh_save_LIBS="$LIBS"
515 LIBS="$TERMLIB $LIBS"
517 dnl Checks for external variable ospeed in the termcap library.
518 AC_CACHE_CHECK(if an include file defines ospeed,
519 nmh_cv_decl_ospeed_include_defines,
521 [#include <sys/types.h>
527 #endif], [ospeed = 0;],
528 nmh_cv_decl_ospeed_include_defines=yes,
529 nmh_cv_decl_ospeed_include_defines=no)])
531 if test $nmh_cv_decl_ospeed_include_defines = no; then
532 AC_CACHE_CHECK(if you must define ospeed,
533 nmh_cv_decl_ospeed_must_define,
534 [AC_TRY_LINK( ,[extern short ospeed; ospeed = 0;],
535 nmh_cv_decl_ospeed_must_define=yes,
536 nmh_cv_decl_ospeed_must_define=no)])
539 if test $nmh_cv_decl_ospeed_include_defines = yes; then
540 AC_DEFINE(HAVE_OSPEED)
541 elif test $nmh_cv_decl_ospeed_must_define = yes; then
542 AC_DEFINE(HAVE_OSPEED)
543 AC_DEFINE(MUST_DEFINE_OSPEED)
546 dnl dnl Checks if tgetent accepts NULL and will
547 dnl dnl allocate its own termcap buffer.
548 dnl AC_CACHE_CHECK(if tgetent accepts NULL,
549 dnl nmh_cv_func_tgetent_accepts_null,
550 dnl [AC_TRY_RUN([main(){int i = tgetent((char*)0,"vt100");exit(!i || i == -1);}],
551 dnl nmh_cv_func_tgetent_accepts_null=yes,
552 dnl nmh_cv_func_tgetent_accepts_null=no,
553 dnl nmh_cv_func_tgetent_accepts_null=no)])
554 dnl if test $nmh_cv_func_tgetent_accepts_null = yes; then
555 dnl AC_DEFINE(TGETENT_ACCEPTS_NULL)
558 dnl Now put the libraries back to what it was before we
559 dnl starting checking the termcap library.
560 LIBS="$nmh_save_LIBS"
572 dnl Check for sigset_t. Currently I'm looking in
573 dnl <sys/types.h> and <signal.h>. Others might need
575 AC_CACHE_CHECK(for sigset_t, nmh_cv_type_sigset_t,
577 [#include <sys/types.h>
578 #include <signal.h>], [sigset_t tempsigset;],
579 nmh_cv_type_sigset_t=yes, nmh_cv_type_sigset_t=no)])
580 if test $nmh_cv_type_sigset_t = no; then
581 AC_DEFINE(sigset_t, unsigned int)
589 AC_CACHE_CHECK(for tm_gmtoff in struct tm, nmh_cv_struct_tm_gmtoff,
591 [#ifdef TIME_WITH_SYS_TIME
592 # include <sys/time.h>
595 # ifdef TM_IN_SYS_TIME
596 # include <sys/time.h>
601 [struct tm temptm; temptm.tm_gmtoff = 0;],
602 nmh_cv_struct_tm_gmtoff=yes, nmh_cv_struct_tm_gmtoff=no)])
603 if test $nmh_cv_struct_tm_gmtoff = yes; then
604 AC_DEFINE(HAVE_TM_GMTOFF)
610 dnl What style of signal do you have (POSIX, BSD, or SYSV)?
611 AC_MSG_CHECKING(what style of signals to use)
612 if test $ac_cv_func_sigaction = yes -a $ac_cv_func_sigprocmask = yes; then
613 signals_style=POSIX_SIGNALS
614 AC_DEFINE(POSIX_SIGNALS)
615 AC_DEFINE(RELIABLE_SIGNALS)
616 elif test $ac_cv_func_sigblock = yes -a $ac_cv_func_sigsetmask = yes; then
617 signals_style=BSD_SIGNALS
618 AC_DEFINE(BSD_SIGNALS)
619 AC_DEFINE(RELIABLE_SIGNALS)
620 elif test $ac_cv_func_sighold = yes -a $ac_cv_func_sigrelse = yes; then
621 signals_style=SYSV_SIGNALS
622 AC_DEFINE(SYSV_SIGNALS)
624 signals_style=NO_SIGNAL_BLOCKING
625 AC_DEFINE(NO_SIGNAL_BLOCKING)
628 AC_MSG_RESULT($signals_style)
630 dnl Where is <signal.h> located? Needed as input for signames.awk
631 AC_CACHE_CHECK(where signal.h is located, nmh_cv_path_signal_h,
632 [for SIGNAL_H in /usr/include/bsd/sys/signal.h dnl Next
633 /usr/include/asm/signal.h dnl Linux 1.3.0 and above
634 /usr/include/asm/signum.h dnl some versions of Linux/Alpha
635 /usr/include/linux/signal.h dnl Linux up to 1.2.11
636 /usr/include/sys/signal.h dnl Almost everybody else
637 /dev/null; dnl Just in case we fall through
639 test -f $SIGNAL_H && \
640 grep '#[ ]*define[ ][ ]*SIG[0-9A-Z]*[ ]*[0-9][0-9]*' $SIGNAL_H > /dev/null && \
643 nmh_cv_path_signal_h=$SIGNAL_H
645 SIGNAL_H=$nmh_cv_path_signal_h
646 AC_SUBST(SIGNAL_H)dnl
649 dnl OS SPECIFIC DEFINES
690 AC_DEFINE(SCO_5_STDIO)
698 AC_OUTPUT(Makefile config/Makefile h/Makefile sbr/Makefile uip/Makefile \
699 zotnet/Makefile zotnet/mts/Makefile zotnet/tws/Makefile \
700 mts/Makefile mts/smtp/Makefile \
701 mts/sendmail/Makefile mts/mmdf/Makefile etc/Makefile \
702 docs/Makefile man/Makefile, \
703 [test -z "$CONFIG_HEADERS" || echo > stamp-h])
705 dnl Umm, what's the point of these assignments?? -- <dan-nmh@dilvish.speed.net>
706 eval "nmhbin=${bindir}"; eval "nmhbin2=${nmhbin}"
707 eval "nmhsysconf=${sysconfdir}"; eval "nmhsysconf2=${nmhsysconf}"
708 eval "nmhlib=${libdir}"; eval "nmhlib2=${nmhlib}"
709 eval "nmhman=${mandir}"
712 if test x"$enable_pop" = x"yes"; then
715 if test x"$enable_apop" = x"yes"; then
716 pop_kinds="${pop_kinds}APOP "
719 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
720 pop_kinds="${pop_kinds}KPOP "
723 pop_kinds="${pop_kinds}POP3)"
729 nmh version : ${VERSION}
730 target os : ${target}
732 compiler flags : ${CFLAGS}
733 linker flags : ${LDFLAGS}
734 source code location : ${srcdir}
735 binary install path : ${nmhbin2}
736 libary install path : ${nmhlib2}
737 config files install path : ${nmhsysconf2}
738 man page install path : ${nmhman}
739 transport system : ${MTS}
740 default smtp servers : ${smtpservers}
741 default editor : ${editorpath}
742 default pager : ${pagerpath}
743 email address masquerading : ${masquerade}
744 pop is enabled : ${pop_kinds}"