For the mhstore -clobber test, cd to the Mail subdirectory so that

[mmh] / docs / README.developers

diff --git a/docs/README.developers b/docs/README.developers
index 4437340..a66e6e8 100644 (file)
--- a/docs/README.developers
+++ b/docs/README.developers
@@ -1,52 +1,59 @@
 #
 # README.developers
 #
 #
 # README.developers
 #

-# $Id$
-#

 
 This file is intended to provide a few tips for anyone doing development on nmh.
 Developers who learn things "the hard way" about the nmh codebase (as opposed to
 local info best encoded in a comment) are encouraged to share their wisdom here.
 
 
 This file is intended to provide a few tips for anyone doing development on nmh.
 Developers who learn things "the hard way" about the nmh codebase (as opposed to
 local info best encoded in a comment) are encouraged to share their wisdom here.
 

-The topics are organized alphabetically.
+Following a commit checklist, the topics are organized alphabetically.
+
+----------------
+commit checklist
+----------------

 
 

+1. code updated?
+2. test added?
+3. make distcheck passed?
+4. man page and other documentation updated?
+5. docs/pending-release-notes updated?
+6. should commit message reference bug report?
+7. update/close bug report (with commit id)?
+8. notify nmh-users?

 
 

---------------
-autoconf files
---------------

 
 

-If you wish to change the `configure' script or its related files, you'll need
-to first install GNU m4, available from <ftp://ftp.gnu.org/pub/gnu/m4/> and then
-GNU autoconf (<ftp://ftp.gnu.org/pub/gnu/autoconf/>).
+-------------------------
+autoconf & automake files
+-------------------------

 
 

-Most of the configure-related files are automatically generated.  The only files
-you should need to manually edit are acconfig.h and configure.in.  Don't, for
-instance, edit config.h.in.  Though it is an input file from the point of view
-of the users (and the configure script) it is an output file from the point of
-view of the developers (and the autoconf script).
+If you wish to change the `configure' script, the generated Makefile
+or other related files, you'll need to first install GNU m4, available
+from <ftp://ftp.gnu.org/pub/gnu/m4/>, then GNU autoconf
+(<ftp://ftp.gnu.org/pub/gnu/autoconf/>) and GNU automake
+(<ftp://ftp.gnu.org/pub/gnu/automake/>).  Nmh is currently using a
+minimum of autoconf 2.61 and automake 1.10.

 
 

-If you do change acconfig.h or configure.in and want to `cvs commit' them, be
-sure to regenerate the output files and commit them as well.  The easiest way to
-regenerate the files is to simply run `make' -- it'll do the necessary calls of
-autoconf and autoheader and will do a `./config.status --recheck', which will
-exercise your new configure script.
+Most of the configure-related files are automatically generated.
+The only files you should need to manually edit are configure.ac
+and any autoconf macros in the m4 directory.  Don't, for instance,
+edit config.h.in.  Though it is an input file from the point of
+view of the users (and the configure script) it is an output file
+from the point of view of the developers (and the autoconf script).

 
 

-When you commit the configure-related files, it's very important to commit them
-in the right order.  The timestamps on the files in the CVS archive are based on
-the current time at the moment they were committed -- the timestamps from the
-local files you commit are not copied over.  If you commit the files in the
-wrong order, you'll cause unnecessary calls of `autoconf' to occur when people
-try to `make' their copies of the latest CVS source.  These people may be
-end-users who don't have any interest in changing the configure-related files
-and don't have autoconf installed.  They'll be unable to make without playing
-around with `touch'.
+If you wish to add a new autoconf macro, it should be placed in it's
+own file and put in the m4 directory; aclocal will automatically pick
+it up and automake will add it to the distribution target automatically.

 
 

-The correct order to commit the configure-related files is:
+If you wish to make changes to the Makefile, you will need to edit
+Makefile.am.  See the automake documentation if you need further help.
+You should always check changes to Makefile.am by using "make distcheck".

 
 

-    % cvs commit acconfig.h config.h.in configure.in configure stamp-h.in
+Note that the automatically generated autotools files (such as config.h.in,
+Makefile.in, and configure), are NOT kept in git.  Thus, when you check out
+a git tree, you need to run the autogen.sh script before you can build
+anything:

 
 

-If you haven't changed all of those files, just commit the rest in the stated
-order (e.g. cvs commit acconfig.h config.h.in stamp-h.in).
+        % ./autogen.sh

 
 
 -------------------
 
 
 -------------------

@@ -56,7 +63,7 @@ directory structure
 Following is a list of nmh's directories along with a brief description of the
 purpose of each one.  Meanings are given for the abbreviations, but note that
 these meanings are just informed guesses as to what the MH developers were
 Following is a list of nmh's directories along with a brief description of the
 purpose of each one.  Meanings are given for the abbreviations, but note that
 these meanings are just informed guesses as to what the MH developers were

-thinking. 
+thinking.

 
 ./
     The top-level directory.  Contains files like README and INSTALL.
 
 ./
     The top-level directory.  Contains files like README and INSTALL.

@@ -65,6 +72,10 @@ config/
     Contains utility files for the `configure' process.  Ordinarily nothing in
     here needs to be messed with.
 
     Contains utility files for the `configure' process.  Ordinarily nothing in
     here needs to be messed with.
 

+docs/
+    Contains more specialized documentation, such as this file and
+    the FAQ.
+

 etc/
     Contains files, file templates, and scripts to generate files that will be
     installed in the ${prefix}/etc directory.  Stuff like replcomps.
 etc/
     Contains files, file templates, and scripts to generate files that will be
     installed in the ${prefix}/etc directory.  Stuff like replcomps.

@@ -81,14 +92,6 @@ mts/
     "mts" stands for "Message Transfer Service".  Source files specific to the
     different MTSs go in the subdirectories.
 
     "mts" stands for "Message Transfer Service".  Source files specific to the
     different MTSs go in the subdirectories.
 

-mts/mmdf/
-    "mmdf" stands for "Multichannel Memorandum Distribution Facility".  It is an
-    alternative to sendmail used primarily on SCO UNIX.
-
-mts/sendmail/
-    When nmh is configured --with-mts=sendmail, the files in this directory are
-    used. 
-

 mts/smtp/
     When nmh is configured to just talk to an SMTP server over TCP/IP, the
     source in this directory is compiled.
 mts/smtp/
     When nmh is configured to just talk to an SMTP server over TCP/IP, the
     source in this directory is compiled.

@@ -97,7 +100,10 @@ sbr/
     "sbr" stands for "subroutine(s)".  For the most part, each source file in
     this directory contains a single function with the same name as the source
     file.  These functions are of general use and are called from throughout
     "sbr" stands for "subroutine(s)".  For the most part, each source file in
     this directory contains a single function with the same name as the source
     file.  These functions are of general use and are called from throughout

-    nmh.  
+    nmh.
+
+test/
+    The num unit test suite.

 
 uip/
     "uip" stands for "User Interface Programs".  Most nmh commands have a file
 
 uip/
     "uip" stands for "User Interface Programs".  Most nmh commands have a file

@@ -106,67 +112,105 @@ uip/
     <command>sbr.c which contains additional subroutines called from <command>.c
     (which would contain not much else besides main()).
 
     <command>sbr.c which contains additional subroutines called from <command>.c
     (which would contain not much else besides main()).
 

-zotnet/
-    Files in this hierarchy were either written by or moved here by UCI
-    (University of California, Irvine) after they took over MH from the Rand
-    Corporation.  "Zot!" is the sound effect made by the anteater in the "B.C."
-    comic strip when its tongue lashes out at ants.  The anteater is UCI's
-    official mascot.  Not sure whether UCInet was once called ZotNet...

 
 

-zotnet/bboards/
-    UCI added Bulletin Board functionality to MH with the `bbc' command.  This
-    functionality has been removed from nmh but apparently files in this
-    directory are still needed for other purposes.
+---
+git
+---
+
+As of December 2010, nmh has switched to using git for revision control
+instead of CVS.  While the topic of git is beyond the scope of this FAQ,
+to get started with git & nmh, you can run the following command to checkout
+the nmh repository:
+
+    % git clone git://git.savannah.nongnu.org/nmh.git
+
+That will create a workspace call nmh.  To update that workspace
+with changes to the master, cd to it and run:
+
+    % git pull

 
 

-zotnet/mf/
-    "mf" stands for "Mail Filter".  The filtering in this case apparently refers
-    to translation between different address and mailbox formats.

 
 

-zotnet/mts/
-    MTS code not specific to any single MTS apparently goes here.
+-------------------------------------------------------
+nmh-local functions to use in preference to OS versions
+-------------------------------------------------------

 
 

-zotnet/tws/
-    No idea what "tws" stands for, other than 't' almost certainly standing for
-    "time".  Date and time manipulation routines go here.
+For some system functions whose availability or behavior varies from OS to OS,
+nmh conditionally uses a local definition with the same name as the OS function
+(e.g. snprintf()).  For other functions, developers need to avoid the OS
+versions and always use the nmh-supplied function.  Here is a list of such
+functions:
+
+OS function  nmh-local version to use instead
+===========  ================================
+getpass()    nmh_getpass()

 
 
 -------------
 releasing nmh
 -------------
 
 
 
 -------------
 releasing nmh
 -------------
 

-To make a public release of nmh (we'll use version 1.0.4 and my mhost.com
-account, danh, as examples here):
+To make a public release of nmh (we'll use version 1.5 as the example
+here; the convention for release candidates is to use something like
+"1.5-RC1"):
+
+ 1. % echo 1.5 > VERSION
+    % date +"%e %B %Y" > DATE
+    (DATE should contain something like "30 December 2000")
+
+ 2. % git commit VERSION DATE; git push
+
+ 3. % git tag -a 1.5 -m 'Releasing nmh-1.5.'
+
+    Note that the new convention for tagging is to simply tag with the
+    version number (tag formats in the past have varied).
+
+ 4. % make distcheck
+
+    If you want to check the distribution build with some particular
+    configure options, set the DISTCHECK_CONFIGURE_FLAGS variable.
+    E.g.:
+
+    % make distcheck DISTCHECK_CONFIGURE_FLAGS=--with-cyrus-sasl
+
+ 5. If all is well and your tarball is final, go back to your workspace and do:

 
 

-1. % echo 1.0.4 > VERSION
+    % echo 1.5+dev > VERSION

 
 

-2. Put a comment like "Released nmh-1.0.4." in the ChangeLog.
+ 6. % git commit VERSION; git push

 
 

-3. % cvs commit ChangeLog VERSION
+ 7. Upload the distribution file to savannah.  You can automate this process
+    by doing:

 
 

-4. % cvs tag nmh-1_0_4
-   (cvs treats dots specially, so underscores are substituted here.)
+    % make upload SAVANNAH_USERNAME=username

 
 

-5. % make nmhdist
+    This will automatically call gpg to sign the release.  You can bypass
+    this step by setting the SKIP_GPG_SIG variable.

 
 

-6. Preferably make an MD5 hash and/or a PGP signature of nmh-1.0.4.tar.gz.
+ 8. Update the http://www.nongnu.org/nmh/ homepage. (It lives in the CVS
+    'webpages repository'; see https://savannah.nongnu.org/cvs/?group=nmh)

 
 

-7. Preferably test out the tarball, making sure you can uncompress and untar it,
-   and configure, make, install, and use nmh from it.
+ 9. Add a news item to the savannah nmh page. You'll have to submit it first
+    and then separately approve it (under News->Manage).

 
 

-8. % scp -p nmh-1.0.4.tar.gz* your-uid@mhost.com:/home/ftp/pub/nmh
+10. Send the release announcement email to the following places:
+     nmh-workers@nongnu.org
+     nmh-announce@nongnu.org
+     exmh-users@redhat.com
+     exmh-workers@redhat.com
+     mh-e-users@lists.sourceforge.net

 
 

-9. Send an announcement to exmh-users@redhat.com, exmh-workers@redhat.com,
-   mh-users@ics.uci.edu, and nmh-announce@mhost.com.  If the release fixes
-   significant security holes, also send an announcement to
-   bugtraq@securityfocus.com.  None of these lists require you to be subscribed
-   to post.  Note that you don't need to post separately to comp.mail.mh, as the
-   mh-users mailing list is apparently bidirectionally gatewayed to it.
+    If the release fixes significant security holes, also send an announcement
+    to bugtraq@securityfocus.com.  The exmh lists require you to be subscribed
+    in order to post.  Note that you don't need to post separately to
+    comp.mail.mh, as the mh-users mailing list is apparently bidirectionally
+    gatewayed to it.

 
 

-   Preferably, the announcement should contain the MD5 hash generated above, and
-   should be PGP-signed.  It should include the FTP URL for the tarball as well
-   as the URL of the website.  It should contain a brief summary of visible
-   changes, as well as the URL of the cvsweb diff page that would show a
-   detailed list of changes.  The changes between 1.0.3 and 1.0.4 would be shown
-   by:
+    Preferably, the announcement should contain the MD5 hash generated above,
+    and should be PGP-signed.  It should include the URL for the tarball as
+    well as the URL of the website.  It should contain a brief summary of
+    visible changes, as well as the URL of the git diff page that would show
+    a detailed list of changes.  The changes between 1.5 and 1.4 would be
+    shown by [this is just a guess, I don't know anything about cgit, and
+    it assumes that we tag with nmh-x_x-release from now on]:

 
 

-       http://www.mhost.com/cgi-bin/cvsweb/nmh/ChangeLog?r1=1.40&r2=1.71
+        http://git.savannah.gnu.org/cgit/nmh.git/diff/?h=nmh-1_5-release?h=nmh-1_4-release