+++ /dev/null
-/* config.h.in. Generated automatically from configure.in by autoheader. */
-
-/****** BEGIN USER CONFIGURATION SECTION *****/
-
-/*
- * IMPORTANT: You should no longer need to edit this file to handle
- * your operating system. That should be handled and set correctly by
- * configure now.
- *
- * These are slowly being phased out, but currently
- * not everyone is auto-configured. Then decide if you
- * wish to change the features that are compiled into nmh.
- */
-
-/*
- * Turn on locale (setlocale) support
- */
-#define LOCALE 1
-
-/*
- * Define to 1 the type of file locking to use. You need to
- * make sure the type of locking you use is compatible with
- * other programs which may modify your maildrops.
- * Currently you can only use one type.
- */
-#undef DOT_LOCKING
-#undef FCNTL_LOCKING
-#undef LOCKF_LOCKING
-#undef FLOCK_LOCKING
-
-/*
- * If you have defined DOT_LOCKING, then the default is to
- * place the lock files in the same directory as the file that
- * is to be locked. Alternately, if you define LOCKDIR, you
- * can specify that all lock files go in a specific directory.
- * Don't define this unless you know you need it.
- */
-/* #define LOCKDIR "/usr/spool/locks" */
-
-/*
- * Define this if your passwords are stored in some type of
- * distributed name service, such as NIS, or NIS+.
- */
-#define DBMPWD 1
-
-/*
- * Directs nmh not to try and rewrite addresses
- * to their official form. You probably don't
- * want to change this without good reason.
- */
-#define DUMB 1
-
-/*
- * Define this if you do not want nmh to attach the local hostname
- * to local addresses. You must also define DUMB. You probably
- * don't need this unless you are behind a firewall.
- */
-/* #define REALLYDUMB 1 */
-
-/*
- * Starting on January 1, 2000, some MUAs like ELM and Ultrix's DXmail started
- * generated bad dates ("00" or "100" for the year). If this #define is active,
- * we use windowing to correct those dates to what we presume to be the intended
- * values. About the only time this could get us into trouble would be if a MUA
- * was generating a year of "00" in 2001 or later, due to an unrelated bug. In
- * this case we would "correct" the year to 2000, which could result in
- * inaccurate bug reports against the offending MUA. A much more esoteric case
- * in which you might not want to #define this would be if you were OCR'ing in
- * old written correspondence and saving it in email format, and you had dates
- * of 1899 or earlier.
- */
-#define FIX_NON_Y2K_COMPLIANT_MUA_DATES 1
-
-/*
- * Directs inc/slocal to extract the envelope sender from "From "
- * line. If inc/slocal is saving message to folder, then this
- * sender information is then used to create a Return-Path
- * header which is then added to the message.
- */
-#define RPATHS 1
-
-/*
- * If defined, slocal will use `mbox' format when saving to
- * your standard mail spool. If not defined, it will use
- * mmdf format.
- */
-#define SLOCAL_MBOX 1
-
-/*
- * If this is defined, nmh will recognize the ~ construct.
- */
-#define MHRC 1
-
-/*
- * Compile simple ftp client into mhn. This will be used by mhn
- * for ftp access unless you have specified another access method
- * in your .mh_profile or mhn.defaults. Use the "mhn-access-ftp"
- * profile entry to override this. Check mhn(1) man page for
- * details.
- */
-#define BUILTIN_FTP 1
-
-/*
- * If you enable POP support, this is the the port name that nmh will use. Make
- * sure this is defined in your /etc/services file (or its NIS/NIS+ equivalent).
- * If you are using KPOP, you will need to change this to "kpop" unless you want
- * to be able to use both POP3 _and_ Kerberized POP and plan to use inc and
- * msgchk's -kpop switch every time in the latter case.
- */
-#define POPSERVICE "pop3"
-
-/*
- * Define the default creation modes for folders and messages.
- */
-#define DEFAULT_FOLDER_MODE "700"
-#define DEFAULT_MESSAGE_MODE "600"
-
-/*
- * Name of link to file to which you are replying.
- */
-#define LINK "@"
-
-/*
- * If wait/waitpid returns an int (no union wait).
- */
-#define WAITINT 1
-
-/* The following are autoconfigured, but you may wish to override the
- * decisions of autoconf (and AC_CANONICAL_SYSTEM) and do your own
- * thing. If so, you can modify the definitions. The Comments are as
- * useful as ever. */
-
-/* these three are only used in vmh.c, which currently is not being
- * built anyway. -Doug */
-/* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
-#undef SYS5
-/* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
-#undef SVR4
-/* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS, Mac OS X/Rhapsody */
-#undef BSD44
-
-/* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS, Mac OS X/Rhapsody
- * -- does PicoBSD have uname? :) */
-#undef BSD42
-
-/* Defined for SCO5 */
-#undef SCO_5_STDIO
-
-/* This tells nmh to use the Linux _IO_*_ptr defines from libio.h */
-#undef LINUX_STDIO
-
-
-/***** END USER CONFIGURATION SECTION *****/
-
-/* Define to empty if the keyword does not work. */
-#undef const
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef gid_t
-
-/* Define if your struct stat has st_blksize. */
-#undef HAVE_ST_BLKSIZE
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
-#undef HAVE_SYS_WAIT_H
-
-/* Define if you have <vfork.h>. */
-#undef HAVE_VFORK_H
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef mode_t
-
-/* Define to `long' if <sys/types.h> doesn't define. */
-#undef off_t
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef pid_t
-
-/* Define as the return type of signal handlers (int or void). */
-#undef RETSIGTYPE
-
-/* Define to `unsigned' if <sys/types.h> doesn't define. */
-#undef size_t
-
-/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
-#undef STAT_MACROS_BROKEN
-
-/* Define if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define on System V Release 4. */
-#undef SVR4
-
-/* Define if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef uid_t
-
-/* Define vfork as fork if vfork does not work. */
-#undef vfork
-
-/*
- * The prefix which is prepended to the name of messages when they
- * are "removed" by rmm. This should typically be `,' or `#'
- */
-#define BACKUP_PREFIX ","
-
-/*
- * Define this if you want SMTP (simple mail transport protocol)
- * support. This is currently always enabled.
- */
-#define SMTPMTS 1
-
-/*
- * Define this to compile client-side support for pop into
- * inc and msgchk. Do not change this value manually. You
- * must run configure with the '--enable-pop' option to
- * correctly build the pop client support.
- */
-#undef POP
-
-/*
- * Define this to compile client-side support for apop into
- * inc and msgchk. Do not change this value manually. You
- * must run configure with the '--enable-apop' option to
- * correctly build the apop client support.
- */
-#undef APOP
-
-/*
- * Define this to compile client-side support for kpop
- * (kerberized pop) into inc and msgchk. Do not change this
- * value manually. You must run configure with the option
- * '--with-krb4=PREFIX' to correctly build the kpop client support.
- */
-#undef KPOP
-
-/*
- * Define this to "pop" when using Kerberos V4
- */
-#undef KPOP_PRINCIPAL
-
-/*
- * Define this to use the Cyrus SASL library for authentication of
- * POP and SMTP
- */
-#undef CYRUS_SASL
-
-/*
- * Define this to compile support for using Hesiod to locate
- * pop servers into inc and msgchk. Do not change this value
- * manually. You must run configure with the option
- * '--with-hesiod=PREFIX' to correctly build Hesiod support.
- */
-#undef HESIOD
-
-/*
- * Compile in support for the Emacs front-end mh-e.
- */
-#undef MHE
-
-/* Define to 1 if your termcap library has the ospeed variable */
-#undef HAVE_OSPEED
-/* Define to 1 if you have ospeed, but it is not defined in termcap.h */
-#undef MUST_DEFINE_OSPEED
-
-/* Define to 1 if you have reliable signals */
-#undef RELIABLE_SIGNALS
-
-/* Define to 1 if you use POSIX style signal handling */
-#undef POSIX_SIGNALS
-
-
-/* Define to 1 if you use BSD style signal handling (and can block signals) */
-#undef BSD_SIGNALS
-
-
-/* Define to 1 if you use SYS style signal handling (and can block signals) */
-#undef SYSV_SIGNALS
-
-
-/* Define to 1 if you have no signal blocking at all (bummer) */
-#undef NO_SIGNAL_BLOCKING
-
-/* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
-#undef sigset_t
-
-/*
- * Define to 1 if your vi has ATT bug, such that it returns
- * non-zero exit codes on `pseudo-errors'.
- */
-#undef ATTVIBUG
-
-/*
- * Define to 1 if you need to make `inc' set-group-id because your mail spool is
- * not world writable. There are no guarantees as to the safety of doing this,
- * but this #define will add some extra security checks.
- */
-#undef MAILGROUP
-
-/* Define if your system defines TIOCGWINSZ in sys/ioctl.h. */
-#undef GWINSZ_IN_SYS_IOCTL
-
-/* Define if your system defines `struct winsize' in sys/ptem.h. */
-#undef WINSIZE_IN_PTEM
-
-/* Define to 1 if struct tm has gmtoff */
-#undef HAVE_TM_GMTOFF
-
-/* Define if your system has sigsetjmp */
-#undef HAVE_SIGSETJMP
-
-/* Define if your system has gethostbyname */
-#undef HAVE_GETHOSTBYNAME
-
-/* Define to the header containing the declaration of initgroups() on your
- system, if any. AIX 4.[13], SunOS 4.1.3, and ULTRIX 4.2A have the function
- in libc but don't have a declaration anywhere. */
-#undef INITGROUPS_HEADER
-
-/* Define if your system actually has a prototype for snprintf() in <stdio.h>
- (or a file it includes) rather than just having a "stealth" definition of it
- in libc.a the way AIX 4.1 does. */
-#undef HAVE_SNPRINTF_PROTOTYPE
-
-/* Define if you have the getutent function. */
-#undef HAVE_GETUTENT
-
-/* Define if you have the killpg function. */
-#undef HAVE_KILLPG
-
-/* Define if you have the lstat function. */
-#undef HAVE_LSTAT
-
-/* Define if you have the mkstemp function. */
-#undef HAVE_MKSTEMP
-
-/* Define if you have the sethostent function. */
-#undef HAVE_SETHOSTENT
-
-/* Define if you have the sigaction function. */
-#undef HAVE_SIGACTION
-
-/* Define if you have the sigblock function. */
-#undef HAVE_SIGBLOCK
-
-/* Define if you have the sighold function. */
-#undef HAVE_SIGHOLD
-
-/* Define if you have the sigprocmask function. */
-#undef HAVE_SIGPROCMASK
-
-/* Define if you have the sigrelse function. */
-#undef HAVE_SIGRELSE
-
-/* Define if you have the sigsetmask function. */
-#undef HAVE_SIGSETMASK
-
-/* Define if you have the snprintf function. */
-#undef HAVE_SNPRINTF
-
-/* Define if you have the strdup function. */
-#undef HAVE_STRDUP
-
-/* Define if you have the strerror function. */
-#undef HAVE_STRERROR
-
-/* Define if you have the tzset function. */
-#undef HAVE_TZSET
-
-/* Define if you have the uname function. */
-#undef HAVE_UNAME
-
-/* Define if you have the wait3 function. */
-#undef HAVE_WAIT3
-
-/* Define if you have the waitpid function. */
-#undef HAVE_WAITPID
-
-/* Define if you have the writev function. */
-#undef HAVE_WRITEV
-
-/* Define if you have the <arpa/ftp.h> header file. */
-#undef HAVE_ARPA_FTP_H
-
-/* Define if you have the <arpa/inet.h> header file. */
-#undef HAVE_ARPA_INET_H
-
-/* Define if you have the <crypt.h> header file. */
-#undef HAVE_CRYPT_H
-
-/* Define if you have the <db1/ndbm.h> header file. */
-#undef HAVE_DB1_NDBM_H
-
-/* Define if you have the <dirent.h> header file. */
-#undef HAVE_DIRENT_H
-
-/* Define if you have the <errno.h> header file. */
-#undef HAVE_ERRNO_H
-
-/* Define if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define if you have the <ndir.h> header file. */
-#undef HAVE_NDIR_H
-
-/* Define if you have the <netdb.h> header file. */
-#undef HAVE_NETDB_H
-
-/* Define if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define if you have the <sys/dir.h> header file. */
-#undef HAVE_SYS_DIR_H
-
-/* Define if you have the <sys/ndir.h> header file. */
-#undef HAVE_SYS_NDIR_H
-
-/* Define if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/utsname.h> header file. */
-#undef HAVE_SYS_UTSNAME_H
-
-/* Define if you have the <termcap.h> header file. */
-#undef HAVE_TERMCAP_H
-
-/* Define if you have the <termio.h> header file. */
-#undef HAVE_TERMIO_H
-
-/* Define if you have the <termios.h> header file. */
-#undef HAVE_TERMIOS_H
-
-/* Define if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the lockfile library (-llockfile). */
-#undef HAVE_LIBLOCKFILE
-
-/* Define if you have the m library (-lm). */
-#undef HAVE_LIBM
-
-/* Define if you have the mkstemp library (-lmkstemp). */
-#undef HAVE_LIBMKSTEMP
-
-/* Define if you have the ndbm library (-lndbm). */
-#undef HAVE_LIBNDBM
-
-/* Define if you have the nsl library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define if you have the socket library (-lsocket). */
-#undef HAVE_LIBSOCKET
projects / mmh / commitdiff