+Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
+
+ * added a lint target to the Makefiles and a check in autoconf
+ to determine whether lint or lclint exists on the system.
+
+Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * etc/Makefile.in was incorrectly installing mts.conf.in and
+ sendfiles.in -- fixed. Generated sendfiles script was not a
+ dependency of the `all' target, and was incorrectly included in
+ the distribution. Changed the suffix for the backed-up previous
+ versions of the etc files from the ambiguous .old to .prev. Added
+ call to diff -- only keep the .prev files around if different from
+ the newly-installed versions (intentionally didn't redirect output
+ to /dev/null so you'll notice when your changed versions are
+ getting moved aside).
+
+ * INSTALL never documented the etc/*.old thing. Documented the
+ new etc/*.prev thing (including a note to watch for diff output).
+
+ * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
+
+ In the map_write routine, a call is made to map_open and this
+ call is supposed to set the "clear" variable to 0 or 1,
+ depending on whether the map file is empty or not. In
+ mh6.8.3, this worked because map_open would set "clear" by
+ calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
+ was merged into mbx_open, but the interface for mbx_open
+ doesn't support the clear variable, so that functionality was
+ lost. The map_open interface still contains "int *clear" in
+ the prototype, but never sets it.
+
+ My patch eliminates "clear" from the map_open interface (I
+ checked to make sure that map_write is the only client of
+ map_open). Furthermore, my patch also sets the "clear"
+ variable properly at the beginning of map_write by calling
+ fstat(). This eliminates the bug in that the value of "clear"
+ being used later in the routine was just stack garbage.
+
+ Having a bad value of clear causes this next bug to be
+ triggered: The fp file pointer was being opened with fdopen,
+ but in two of the three switch cases it wasn't being closed.
+ In certain cases, this was causing packf to run out of file
+ descriptors if you attempted to pack a large folder.
+
+Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
+
+ * Moved the date parsing routines from zotnet/tws to sbr/ (and
+ tws.h to h/). Updated all source files to reflect to new location
+ of tws.h.
+
+ * Rewrote dparsetime (dtimep.c) to replace the old
+ zotnet/tws/dtimep.c, lexstring.c, lexedit.c, and
+ dtimep.c-lexed. It should now work with flex (although untested
+ with lex), and requires no sed-ing. For now, I have the lexed
+ version in the distribution, so that end-users don't need to worry
+ about running it through flex/lex. I have not added back support
+ for guessing the time zone when it's not specified.
+
+Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
+
+ * Added autoconf check for getutent().
+
+ * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
+ friends. Since I can only check on Linux, please check if
+ this works on other systems.
+
+Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
+
+ * Applied patch from Peter Maydell to uip/scansbr.c for more
+ checks for write failures.
+
+ * Unlink temporary file properly in uip/rcvtty.c.
+
+ * Moved viamail from bindir to libdir.
+
+ * Changed sendfiles into sendfiles.in, so that path to viamail
+ is patched in.
+
+ * Added gzip support to sendfiles.
+
+ * Added References header to replcomps and replgroupcomps.
+
+Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
+
+ * Fixed m_getfld bug which caused segmentation faults when
+ incorporating messages which ended in multiple linefeeds crossing
+ a buffer boundary.
+
+Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * msh has been unable to show MIME messages ever since 1.0. Alec
+ Wolman <wolman@cs.washington.edu> tracked down the problem to the
+ -show flag being passed to mhshow. mhshow is equivalent to the
+ old mhn -show, so we don't need the -show anymore. Removed it.
+
+Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
+
+ * zotnet/bboards is not longer built by default. Goal is to move
+ the assorted functions in zotnet into sbr or some more logical
+ place.
+
+ * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
+ as well as Makefiles.
+
+Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
+
+ * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
+ seperately and redundantly defined, but so that OBJS is a
+ pattern-substituted version of SRCS with suffix .c -> .o. This
+ should make maintainability easier.
+
+ * Added section to MACHINES indicating what platforms nmh is known
+ to compile and work on, just to give users peace of mind, or
+ something. This is by no means complete or exhaustive, so add
+ whatever you know works.
+
+Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
+ enabled" line. If POP3 is the only kind of POP enabled, say so,
+ rather than just saying "yes" (which is ambiguous).
+
+ * Fixed four warnings in Shantonu's new getpass.c. Needed to
+ #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
+ "h/mh.h" for adios(). Also changed ch from char to int to get rid
+ of "comparison is always 1 due to limited range of data type" on EOF.
+
+ * Added steps to README.developers saying to change the version
+ number to X.Y.Z+dev. Did a little rearranging and changed the FTP
+ dir from /home/ftp to /var/ftp to reflect Doug's new machine.
+
+ * Changed configure.in to use gcc -Wall even without
+ --enable-debug, to prevent developers compiling optimized from
+ introducing warnings, and to give end-users a warm, fuzzy feeling
+ as they (hopefully) see no warnings come out (except perhaps on
+ the lex output file) even with -Wall.
+
+ * Renamed getpass() to nmh_getpass() since the prototype for
+ getpass() varies from OS to OS, and we want to _always_ use our
+ version of the function. Fixed all the callers to use
+ nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
+ upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
+ and the memory leaked -- should have just been declared as static
+ char array. Prepended "Portions of this code are" to the
+ copyright message, as this version has been changed significantly
+ from the BSD version.
+
+ * Added "nmh-local functions to use in preference to OS versions"
+ section to README.developers (currently just says to use
+ nmh_getpass() instead of system getpass()).
+
+ * Prepended "Portions of this code are" to the copyright message
+ in ruserpass.c also.
+
+ * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
+ report:
+
+ This happens on solaris:
+
+ % man mts.conf
+ windex entry incorrect: mts.conf(5) not found.
+ No manual entry for mts.conf.
+
+ It is fixed by
+
+ % echo ".so man5/mh-tailor.5" > mts.conf.5
+
+ done in the man5 directory. We need to add 'mts.conf.5' as a
+ reference sourcing mh-tailor.5.
+
+Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Doug informed me that the way I had restored the "lost" version
+ histories was wrong, because `cvs checkout's of old versions of
+ nmh wouldn't work properly. It occurs to me that this could be
+ fixed by simply deleting those tags in the new-location *,v files,
+ but oh well. I'm putting everything back to the way Doug
+ originally had it. To get the old version history for a file that
+ used to be in the top directory, you'll need to "blindly" do a
+ `cvs log' there (even though you won't have a local copy of the
+ file in that directory). `cvs diff' will no longer be able to
+ diff pre-move versions vs. post-move versions -- you'll have to do
+ a lot of manual gyrations with `cvs checkout' and then use `diff'.
+
+ * I had alphabetized the --configure options in the --help output
+ awhile back, but Shantonu added --enable-apop just under
+ --enable-pop. Put it in alphabetical order and clarified what
+ --enable-apop does vs. --enable-pop and --with-krb4. Also changed
+ --with-mts help line from "mail transport agent" to "mail
+ transport agent/service" so the 's' in "mts" doesn't seem to come
+ out of nowhere.
+
+ * Added two steps to "releasing nmh" in README.developers. After
+ making the tarball, it's a good idea to diff the tree vs. the CVS
+ tree to make sure no files got left out, and then to chown the
+ files so that they're owned by root, preventing a Trojaning attack
+ by a malicious remote user with a UID matching yours.
+
+ * Changed DIFFERENCES to say that RPOP is not currently supported
+ rather than implying it by saying that APOP, KPOP, and POP[3] are.
+
+Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
+
+ * Imported NetBSD version of getpass() and made extensive
+ revisions for compatibility with programs that pipe the password
+ to stdin, such as exmh.
+
+ * Removed tests for system ruserpass() which sometimes gave
+ phantom positive results. Also, bext to use internal functions if
+ we ever want to change .netrc format to something else, or access
+ other files.
+
+Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Restored lost version histories for those moved files by doing a
+ manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
+ command so that you can move files (without having physical access
+ to the CVSROOT) without losing versioning. Put MACHINES back at
+ the top level as it needs to be read before building. Fixed DIST
+ variable in {.,docs}/Makefile.in to reflect that and to add
+ missing entry for "INSTALL" file.
+
+Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
+
+ * Re-cleaned up nmh documentation (by moving things to docs
+ subdir) and modified Makefile & configure.in to handle the change.
+
+Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Scott Blachowicz pointed out that the configure --help output
+ for --enable-masquerade was misleading. Clarified.
+
+Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
+
+ * APOP support can be compiled in to inc and msgchk using
+ --enable-apop.
+
+ * To access an APOP host, specify -apop on the command line
+ along with any -host or -user option.
+
+Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Upped the version number to 1.0.4+dev until the next nmh release.
+
+ * Added a "releasing nmh" section to README.developers, while the
+ process was fresh in my mind.
+
+Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
+ ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
+
+ * Released nmh-1.0.4.
+
+Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
+ patch:
+
+ It appears that there shouldn't be quotes around the %s in the
+ iso-8859-1 charset entry; xterm passes the remaining arguments
+ to the program, quoting them means that xterm thinks they're
+ part of the program's name.
+
+ This %s isn't the same as the "Insert content subtype" one from
+ mhshow-show-* -- it doesn't come from MIME headers and is safe not
+ to quote.
+
+Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
+
+ * added check in fmt_compile() to handle a single-character
+ format string. fmt_compile() depends on having an array of
+ format characters with an empty item at the end. A
+ single-character format would cause programs using this
+ function to segfault because the algorithm used to decide on
+ the length of the array mistakenly created a single-item array
+ when the format string was one character. This eventually
+ caused problems when the program attempted to test item+1
+ in the array.
+
+Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Richard Coleman threw out a lot of old MH-specific files in nmh.
+ Much of the stuff, indeed, is not worth saving, but there are
+ nuggets that are very worthwhile, and should probably be added
+ back in. Most important, IMHO, are the MH change logs, as they
+ can help answer questions like "Why is this code like this?" or
+ "How long has this been broken?" or "What was this ever used for?"
+
+ I've added a new file to the nmh tree called
+ ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
+ mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
+ to go from newest at the top to oldest at the bottom to match the
+ ChangeLog convention. Unfortunately there are no change logs for
+ versions of MH prior to 3 in the MH tar files available at
+ <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
+ are MH-6.6 changes that aren't documented in the logs.
+
+ I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
+ based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
+ and its "catman"-type output are a pain to deal with, but I was
+ loath to throw away the formatting, so I converted the file to
+ HTML. The only actual markup in the body are the "<B>" and "<U>"
+ tags, and "<" and ">" instead of '<' and '>', so it's quite
+ doable to view the file in plain ASCII mode as well. Note that
+ some of the changes this file documents as having been made in
+ MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
+ and later put in certain 6.8.4 stuff.
+
+Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
+
+ * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
+ fixing apparent bugs in Dan Winship's new security quoting code:
+
+ Since upgrading, I've been getting the following errors
+ while attempting to process some MIME messages:
+
+ (1) Syntax error: Unterminated quoted string
+ exit 2
+
+ and:
+
+ (2) line 1/10 (END)Segmentation fault (core dumped)
+
+ (2) appears to be due to the testing of an unset pointer in
+ mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
+ mis-quoting a filename being handed to the shell in
+ mhshowsbr.c:show_content_aux().
+
+ Resolving the pointer reference issue in
+ mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
+ problem in the routine.
+
+Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
+
+ * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
+ prevent core dumping on packf. Here's the note from his message:
+
+ Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
+ core on a file w/o a From line with a line >= BUFSIZ.
+ I noticed this because I had a junk file in my mail
+ spool somehow.
+
Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
* wesley.craig@umich.edu did not document his previous KPOP patch,
* Whoever originally added the -help switch to all the commands
got too cute and had the option itself print out as "-(help)" in
- the -help output. I guess the idea was to make reference to the
- fact that clearly you know about the -help option since you're
- currently looking at its output. I think it's a bad idea to
- overload the meaning of the parentheses, however -- they're
+ the -help output. One theory is that they were making reference
+ to the fact that clearly you know about the -help option since
+ you're currently looking at its output. I think it's a bad idea
+ to overload the meaning of the parentheses, however -- they're
supposed to indicate what abbreviated prefix of the switch you're
- allowed to specify. It doesn't make sense to show that you're
- allowed to "abbreviate" the switch to its entire length.
+ allowed to specify.
+
+ The other theory is that because you can say something like
+ "mhstore -" and get "mhstore: - ambiguous. It matches" followed
+ by the same list of switches you get with -help, they were saying
+ you can "sorta" abbreviate "-help" as "-". You don't get the
+ "Usage:" string, though, so it's not really the same thing.
Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
also makes "-kpop" a command line option, for users who
would like to use both "kpop" and "pop".
- Did no testing of the new features, as I don't have access to a
- KPOP server.
+ Did no testing of the new features, as I don't have access to a
+ KPOP server.
* Modified inc.man and msgchk.man to document Wesley's new -kpop.
* Added check for <db1/ndbm.h> which is the new location where
linux systems appear to be stuffing this header file.
-Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
+Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
* fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
* Default rcvdistcomps no longer puts a copy of all outgoing
messages in outbox. Added an rcvdistcomps.outbox that does.
-Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
+Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
* Updated configure to check for mkstemp (available on OpenBSD) and
substitute it for mktemp if available.
projects / mmh / blobdiff