#
# INSTALL -- installation instructions
#
-# $Id$
-#
--------------
-Installing nmh
+Installing mmh
--------------
Please read all of the following instructions before you begin
-building nmh.
-
-You should check the MACHINES file to see if there are any specific
-build instructions for your operating system. To build nmh, you will
-need an ANSI C compiler such as gcc.
-
-1) Run the command
-
- sh configure [options]
-
- This will check the configuration of your OS, and create
- the include file config.h, as well as the various Makefiles.
-
- The configure script accepts various options. The options of
- most interest are listed below. To see the list of all available
- options, you can run
-
- sh configure --help
-
-2) (IMPORTANT) Edit the user configuration section at the beginning
- of the generated include file `config.h'. Currently, not everything
- is auto-configured, so some #defines must be set manually.
+building mmh.
-3) Edit the user configuration section at the top of the main Makefile.
+You should check the docs/MACHINES file to see if there are any
+specific build instructions for your operating system. To build mmh,
+you will need an ANSI C compiler such as gcc.
-4) make
+0) If you have obtained mmh by checking it out of the version control
+ system, you will need to run the GNU autotools to regenerate some
+ files. (If your directory already contains a file 'config.h.in'
+ then this has already been done and you do not need to do it.)
+ You can regenerate the files by running the command
-5) make install
+ ./autogen.sh
-6) Edit the file `mts.conf' (installed in the nmh `etc' directory)
- and make any necessary changes for the mail transport interface
- you are using.
+ (Note that if you're doing mmh development, you should look at
+ docs/README.developers for related information.)
- The default `mts.conf' file assumes you retrieve new mail from
- a local (or NFS mounted) maildrop, and send outgoing mail by
- injecting the message to a mail transfer agent (such as sendmail)
- on the local machine via SMTP.
+1) From the top-level source directory, run the command:
- If you have enabled POP support and you want this to be the
- default method of accessing new mail, you will need to change
- the values of the variables "servers", "pophost", "localname",
- and possibly "mmailid".
+ ./configure [options]
- a) "servers" defines the server to which you send outgoing SMTP
- traffic.
+ This will check the configuration of your OS, as well as the various
+ Makefiles.
- b) "pophost" defines the server that runs the POP daemon, and to
- which `inc' and `msgchk' will query for new mail.
+ The configure script accepts various options. The options of
+ most interest are listed in a section below. To see the list
+ of all available options, you can run:
- c) "localname" defines the hostname that nmh considers local.
- If not set, then nmh queries your OS for this value. You may
- want to change this if you wish your e-mail to appear as if it
- originated on the POP server.
+ ./configure --help
- d) "mmailid" is checked to see if nmh should do username
- masquerading. If the value of this field is non-zero, then
- nmh will check if the pw_gecos field in the password file
- has the form
+2) make
- Full Name <fakeusername>
+3) make install
- If the pw_gecos field has this form, then the internal nmh
- routines that find the username and full name of a user will
- return "fakeusername" and "Full Name" respectively. This is
- useful if you wish messages that you send to appear to come
- from the username of your POP account, rather than your username
- on the local machine.
+ Note that if you have mmh files in the target directories with
+ the same names as the files being installed, the old ones will get
+ overwritten without any warning. The only directory this isn't
+ true for, is the `etc' directory -- in that directory, the distributed
+ files are installed with a `.dist' suffix if they differ from the
+ existing file. Watch for information messages while make is processing
+ that directory to see if you need to merge changes.
- If you compile with POP support, but only want to use it occasionally,
- then you can always use the `-host' and `-user' options to `inc'
- and `msgchk' instead of changing `mts.conf'.
+4) You may edit the file `mhn.defaults' in the mmh `etc' directory.
- Check the `mh-tailor' man page for a list of all the available
- options for this file.
+ This file contains the default profile entries for the mmh commands
+ mhlist/mhstore/show. The syntax of this file is described in section
+ 9.4 of the book "MH & xmh: Email for Users and Programmers", 3rd edition,
+ by Jerry Peek, on the Internet at
+ <http://rand-mh.sourceforge.net/book/mh/confmhn.html>.
+ In most cases you can skip this step.
-7) If you have enabled POP support, make sure that `pop3' (or more
- precisely the value of the define POPSERVICE in config.h) is defined
- in the /etc/services file (or its NIS/NIS+ equivalent) on the client
- machine. It should be something equivalent to "110/tcp". This might
- have already been done when the pop daemon was installed.
+5) Add the bindir to your PATH variable.
-8) Edit the file `mhn.defaults' (installed in the nmh `etc' directory).
- This file contains the default profile entries for the nmh command
- `mhn' and is created by the script `mhn.defaults.sh'. This script
- will search a generic path (essentially your $PATH) for programs to
- handle various content types (for example, xv to display images).
- You can re-run this script and give it a more tailored path. You may
- want to re-run this script later if you install new programs to
- display content. An example of this is:
+ If you haven't change any paths, then the bindir is `/usr/local/mmh/bin'.
+ Likely, your PATH is set in ~/.profile, ~/.kshrc, ~/.bashrc, or a similar
+ file. Have a look at mmhwrap(1), which allows you to access mmh tools
+ conveniently without changing the PATH variable.
- cd support/general
- ./mhn.defaults.sh /usr/local/bin:/usr/X11/bin:/usr/ucb > mhn.defaults
-
- and then move `mhn.defaults' into the nmh `etc' directory.
-
- The `mhn.defaults.sh' script only searches for a simple set of programs.
- If you have specialized programs to handle various types, you will need
- to edit the `mhn.defaults' file manually. The syntax of this file is
- described in the man page for `mhn', and in section 9.4 of the book
- "MH & xmh: Email for Users and Programmers", 3rd edition, by Jerry Peek.
-
-9) Add an optional global mh.profile, if desired. This profile should be
- placed in the nmh `etc' directory with the name `mh.profile'. This
- file will be used to construct the initial .mh_profile of a new nmh
- user, but will not be consulted after that.
-----------------------------------------------
Compiler options, or using a different compiler
-----------------------------------------------
-By default, configure will use the "gcc" compiler if found. You can use a
+By default, configure will use the "gcc" compiler if found. You can use a
different compiler, or add unusual options for compiling or linking that
the "configure" script does not know about, by either editing the user
configuration section of the top level Makefile (after running configure)
-or giving "configure" initial values for these variables by setting them
-in the environment. Using a Bourne-compatible shell (such as sh,ksh,zsh),
-
-you can do that on the command line like this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
+or giving "configure" initial values for these in its command line or in
+its environment. For example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
Or on systems that have the "env" program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+If you want to add to, not replace, compile flags, you can use OURDEFS:
+ ./configure OURDEFS='-Wextra -Wno-sign-compare'
+
----------------------------------------
-Building nmh on additional architectures
+Building mmh on additional architectures
----------------------------------------
-To build nmh on additional architectures, you can do a "make distclean".
-This should restore the nmh source distribution back to its original
-state. You can then configure nmh as above on other architectures in
-which you wish to build nmh. Or alternatively, you can use a different
+To build mmh on additional architectures, you can do a "make distclean".
+This should restore the mmh source distribution back to its original
+state. You can then configure mmh as above on other architectures in
+which you wish to build mmh. Or alternatively, you can use a different
build directory for each architecture.
-
+
---------------------------------
Using a different build directory
---------------------------------
-You can compile the nmh in a different directory from the one containing
-the source code. Doing so allows you to compile it on more than one
-architecture at the same time. To do this, you must use a version of
-"make" that supports the "VPATH" variable, such as GNU "make". "cd" to
-the directory where you want the object files and executables to go and
-run the "configure" script. "configure" automatically checks for the
-source code in the directory that "configure" is in. For example,
-
- cd /usr/local/solaris/nmh
- /usr/local/src/nmh-1.0/configure
+You can compile mmh in a different directory from the one containing
+the source code. Doing so allows you to compile it on more than one
+architecture at the same time. To do this, you must use a version of
+"make" that supports the "VPATH" variable, such as GNU "make". Change
+to the directory where you want the object files and executables to go
+and run the "configure" script. "configure" automatically checks for
+the source code in the directory that "configure" is in. For example,
+
+ cd /usr/local/src/mmh # source directory
+ make clean
+ cd /usr/local/solaris/mmh # build directory
+ /usr/local/src/mmh/configure
make
---------------------
Options for configure
---------------------
---prefix=DIR (DEFAULT is /usr/local/nmh)
+--prefix=DIR (DEFAULT is /usr/local/mmh)
This will change the base prefix for the installation location
- for the various parts of nmh. Unless overridden, nmh is installed
+ for the various parts of mmh. Unless overridden, mmh is installed
in ${prefix}/bin, ${prefix}/etc, ${prefix}/lib, ${prefix}/man.
--bindir=DIR (DEFAULT is ${prefix}/bin)
- nmh's binaries (show, inc, comp, ...) are installed here.
+ mmh's binaries (show, inc, comp, ...) are installed here.
+ You need to have this directory in your PATH variable.
--libdir=DIR (DEFAULT is ${prefix}/lib)
- nmh's support binaries (post, slocal, mhl, ...) are installed here.
+ mmh's test tools (ap, dp, mhtest, ...) are installed here.
+ They are seldom useful to normal users.
--sysconfdir=DIR (DEFAULT is ${prefix}/etc)
- nmh's config files (mts.conf, mhn.defaults, ...) are installed here.
+ mmh's config files (mhn.defaults, ...) are installed here.
--mandir=DIR (DEFAULT is ${prefix}/man)
- nmh's man pages are installed here.
-
---with-mts=MTS (DEFAULT is smtp)
- specify the mail transport system you want to use. The two
- acceptable options are "smtp" (which is the default), and
- "sendmail".
-
- If you use "smtp", this will enable a direct SMTP (simple
- mail transport protocol) interface in nmh. When sending
- mail, instead of passing the message to the mail transport
- agent, `post' will open a socket connection to the mail
- port on the machine specified in the `mts.conf' file
- (default is localhost), and speak SMTP directly.
-
- If you use "sendmail", then `post' will send messages by
- passing forking a local copy of sendmail. Currently it
- will still speak SMTP with this local copy of sendmail.
-
- If you wish to use a transport agent other than sendmail, you will
- need to use a `sendmail wrapper'.
-
---with-editor=EDITOR (DEFAULT is vi)
- specify the full path of the default editor to use. If this
- option is not given, then the configuration process will search
- for the `vi' command and use it as the default. If you wish to
- specify an interface which is compatible with MH, then use the
- nmh command `prompter'. If you specify `prompter', then you don't
- need to give the full pathname.
-
---with-pager=PAGER (DEFAULT is more)
- specify the default pager (file lister) to use. If this option
- is not given, then the configuration process will search for the
- command `more' and use it as the default.
-
---enable-nmh-mhe (DEFAULT)
- Add support for the Emacs front-end `mhe'.
-
---enable-nmh-pop
- Enable client-side support for pop.
-
---with-krb4=PREFIX
- Specify the location of Kerberos V4 for KPOP support. You will
- also need to specify the option `--enable-nmh-pop'. After running
- configure, you will probably need to change the POPSERVICE define
- in config.h. See the comments inside config.h for details.
-
---with-hesiod=PREFIX
- Specify the location of Hesiod.
-
---enable-nmh-debug
- Enable debugging support.
-
---
-Richard Coleman
-coleman@math.gatech.edu
+ mmh's man pages are installed here.
+
+--enable-debug
+ Enable debugging support.
+
+--with-locking=LOCKTYPE (DEFAULT is dot)
+ Specify the locking mechanism when attempting to "inc"
+ a local mail spool. Valid options are "dot", "fcntl", "flock",
+ and "lockf". Of the four, dot-locking requires no special kernel
+ or filesystem support, and simply creates a file called
+ "FILE.lock" to indicate that "FILE" is locked.
+
+ In order to be effective, you should contact the site
+ administrator to find out what locking mechanisms other
+ mail delivery and user programs respect. The most common
+ reason not to use dot-locking is if the mail spool directory
+ is not world- or user-writeable, and thus a lock file cannot
+ be created.
projects / mmh / blobdiff