+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:588: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`$ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`$ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:609: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`$ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:627: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`$ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+
VERSION=`sed -e 's/nmh-//' ${srcdir}/VERSION`
echo "configuring for nmh-$VERSION"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:669: checking for $ac_word" >&5
+echo "configure:778: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:698: checking for $ac_word" >&5
+echo "configure:807: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:746: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:855: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 756 "configure"
+#line 865 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:760: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:780: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:889: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:785: checking whether we are using GNU C" >&5
+echo "configure:894: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:794: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:809: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:918: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:855: checking for working const" >&5
+echo "configure:964: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 860 "configure"
+#line 969 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1018: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:930: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1039: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
- ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
+ # Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:985: checking for a BSD compatible install" >&5
+echo "configure:1075: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1036: checking for $ac_word" >&5
+echo "configure:1126: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1066: checking for $ac_word" >&5
+echo "configure:1156: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1096: checking for $ac_word" >&5
+echo "configure:1186: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1129: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1219: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1137 "configure"
+#line 1227 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "lorder", so it can be a program name with args.
set dummy lorder; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1173: checking for $ac_word" >&5
+echo "configure:1263: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LORDER'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "tsort", so it can be a program name with args.
set dummy tsort; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1201: checking for $ac_word" >&5
+echo "configure:1291: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_TSORT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "sendmail", so it can be a program name with args.
set dummy sendmail; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1236: checking for $ac_word" >&5
+echo "configure:1326: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_sendmailpath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "more", so it can be a program name with args.
set dummy more; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1270: checking for $ac_word" >&5
+echo "configure:1360: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_morepath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "vi", so it can be a program name with args.
set dummy vi; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1308: checking for $ac_word" >&5
+echo "configure:1398: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_vipath'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for broken vi""... $ac_c" 1>&6
-echo "configure:1343: checking for broken vi" >&5
+echo "configure:1433: checking for broken vi" >&5
if eval "test \"`echo '$''{'nmh_cv_attvibug'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking where mail spool is located""... $ac_c" 1>&6
-echo "configure:1366: checking where mail spool is located" >&5
+echo "configure:1456: checking where mail spool is located" >&5
if eval "test \"`echo '$''{'nmh_cv_mailspool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1385: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1475: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1390 "configure"
+#line 1480 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:1398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1488: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1423: checking for opendir in -ldir" >&5
+echo "configure:1513: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1431 "configure"
+#line 1521 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1464: checking for opendir in -lx" >&5
+echo "configure:1554: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1472 "configure"
+#line 1562 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1573: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1506: checking how to run the C preprocessor" >&5
+echo "configure:1596: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1521 "configure"
+#line 1611 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1538 "configure"
+#line 1628 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1544: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1567: checking for ANSI C header files" >&5
+echo "configure:1657: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1572 "configure"
+#line 1662 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1580: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1670: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1597 "configure"
+#line 1687 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1615 "configure"
+#line 1705 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1636 "configure"
+#line 1726 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1671: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1761: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1676 "configure"
+#line 1766 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1685: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1706: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1796: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1711 "configure"
+#line 1801 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1817: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:1748: checking whether stat file-mode macros are broken" >&5
+echo "configure:1838: checking whether stat file-mode macros are broken" >&5
if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1753 "configure"
+#line 1843 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1810: checking for $ac_hdr" >&5
+echo "configure:1900: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1815 "configure"
+#line 1905 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1820: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1910: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking POSIX termios""... $ac_c" 1>&6
-echo "configure:1848: checking POSIX termios" >&5
+echo "configure:1938: checking POSIX termios" >&5
if eval "test \"`echo '$''{'nmh_cv_sys_posix_termios'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1853 "configure"
+#line 1943 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <unistd.h>
tcgetattr(0, 0);
; return 0; }
EOF
-if { (eval echo configure:1863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
nmh_cv_sys_posix_termios=yes
else
if test $nmh_cv_sys_posix_termios = yes; then
echo $ac_n "checking TIOCGWINSZ in termios.h""... $ac_c" 1>&6
-echo "configure:1879: checking TIOCGWINSZ in termios.h" >&5
+echo "configure:1969: checking TIOCGWINSZ in termios.h" >&5
if eval "test \"`echo '$''{'nmh_cv_header_termios_h_tiocgwinsz'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1884 "configure"
+#line 1974 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <termios.h>
int x = TIOCGWINSZ;
; return 0; }
EOF
-if { (eval echo configure:1892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
nmh_cv_header_termios_h_tiocgwinsz=yes
else
if test $nmh_cv_header_termios_h_tiocgwinsz = no; then
echo $ac_n "checking TIOCGWINSZ in sys/ioctl.h""... $ac_c" 1>&6
-echo "configure:1911: checking TIOCGWINSZ in sys/ioctl.h" >&5
+echo "configure:2001: checking TIOCGWINSZ in sys/ioctl.h" >&5
if eval "test \"`echo '$''{'nmh_cv_header_sys_ioctl_h_tiocgwinsz'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1916 "configure"
+#line 2006 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/ioctl.h>
int x = TIOCGWINSZ;
; return 0; }
EOF
-if { (eval echo configure:1924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
nmh_cv_header_sys_ioctl_h_tiocgwinsz=yes
else
ac_safe=`echo "sys/ptem.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/ptem.h""... $ac_c" 1>&6
-echo "configure:1947: checking for sys/ptem.h" >&5
+echo "configure:2037: checking for sys/ptem.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1952 "configure"
+#line 2042 "configure"
#include "confdefs.h"
#include <sys/ptem.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1983: checking for pid_t" >&5
+echo "configure:2073: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1988 "configure"
+#line 2078 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2017: checking for vfork.h" >&5
+echo "configure:2107: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2022 "configure"
+#line 2112 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2117: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2052: checking for working vfork" >&5
+echo "configure:2142: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2058: checking for vfork" >&5
+echo "configure:2148: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2063 "configure"
+#line 2153 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
else
cat > conftest.$ac_ext <<EOF
-#line 2107 "configure"
+#line 2197 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
fi
for ac_func in waitpid wait3 sigaction sigprocmask sigblock sigsetmask \
- sighold sigrelse writev lstat uname tzset killpg \
- sigsetjmp
+ sighold sigrelse writev lstat uname tzset killpg
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2229: checking for $ac_func" >&5
+echo "configure:2318: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2234 "configure"
+#line 2323 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
+echo $ac_n "checking for sigsetjmp""... $ac_c" 1>&6
+echo "configure:2372: checking for sigsetjmp" >&5
+cat > conftest.$ac_ext <<EOF
+#line 2374 "configure"
+#include "confdefs.h"
+#include <setjmp.h>
+int main() {
+sigsetjmp((void *)0, 0);
+; return 0; }
+EOF
+if { (eval echo configure:2381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_SIGSETJMP 1
+EOF
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
for ac_func in snprintf strerror strdup
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2285: checking for $ac_func" >&5
+echo "configure:2398: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2290 "configure"
+#line 2403 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+echo $ac_n "checking for modf""... $ac_c" 1>&6
+echo "configure:2454: checking for modf" >&5
+if eval "test \"`echo '$''{'ac_cv_func_modf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2459 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char modf(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char modf();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_modf) || defined (__stub___modf)
+choke me
+#else
+modf();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_modf=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_modf=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'modf`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for modf in -lm""... $ac_c" 1>&6
+echo "configure:2500: checking for modf in -lm" >&5
+ac_lib_var=`echo m'_'modf | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lm $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2508 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char modf();
+
+int main() {
+modf()
+; return 0; }
+EOF
+if { (eval echo configure:2519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_lib=HAVE_LIB`echo m | sed -e 's/^a-zA-Z0-9_/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+ LIBS="-lm $LIBS"
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:2341: checking for gethostbyname" >&5
+echo "configure:2550: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2346 "configure"
+#line 2555 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:2387: checking for gethostbyname in -lnsl" >&5
+echo "configure:2596: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2395 "configure"
+#line 2604 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for gethostbyname in -lresolv""... $ac_c" 1>&6
-echo "configure:2432: checking for gethostbyname in -lresolv" >&5
+echo "configure:2641: checking for gethostbyname in -lresolv" >&5
ac_lib_var=`echo resolv'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2440 "configure"
+#line 2649 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:2451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:2483: checking for socket" >&5
+echo "configure:2692: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2488 "configure"
+#line 2697 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:2511: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:2529: checking for socket in -lsocket" >&5
+echo "configure:2738: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2746 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:2548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for ruserpass""... $ac_c" 1>&6
-echo "configure:2580: checking for ruserpass" >&5
+echo "configure:2789: checking for ruserpass" >&5
if eval "test \"`echo '$''{'ac_cv_func_ruserpass'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2585 "configure"
+#line 2794 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char ruserpass(); below. */
; return 0; }
EOF
-if { (eval echo configure:2608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_ruserpass=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for _ruserpass""... $ac_c" 1>&6
-echo "configure:2626: checking for _ruserpass" >&5
+echo "configure:2835: checking for _ruserpass" >&5
if eval "test \"`echo '$''{'ac_cv_func__ruserpass'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2631 "configure"
+#line 2840 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _ruserpass(); below. */
; return 0; }
EOF
-if { (eval echo configure:2654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2863: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func__ruserpass=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for _ruserpass in -lsocket""... $ac_c" 1>&6
-echo "configure:2672: checking for _ruserpass in -lsocket" >&5
+echo "configure:2881: checking for _ruserpass in -lsocket" >&5
ac_lib_var=`echo socket'_'_ruserpass | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2680 "configure"
+#line 2889 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
_ruserpass()
; return 0; }
EOF
-if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
termcap_curses_order="termcap curses ncurses"
for lib in $termcap_curses_order; do
echo $ac_n "checking for tgetent in -l${lib}""... $ac_c" 1>&6
-echo "configure:2737: checking for tgetent in -l${lib}" >&5
+echo "configure:2946: checking for tgetent in -l${lib}" >&5
ac_lib_var=`echo ${lib}'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l${lib} $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2745 "configure"
+#line 2954 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:2756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
done
echo $ac_n "checking for dbm_open""... $ac_c" 1>&6
-echo "configure:2779: checking for dbm_open" >&5
+echo "configure:2988: checking for dbm_open" >&5
if eval "test \"`echo '$''{'ac_cv_func_dbm_open'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2784 "configure"
+#line 2993 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_dbm_open=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -lndbm""... $ac_c" 1>&6
-echo "configure:2825: checking for dbm_open in -lndbm" >&5
+echo "configure:3034: checking for dbm_open in -lndbm" >&5
ac_lib_var=`echo ndbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lndbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2833 "configure"
+#line 3042 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:2844: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbm_open in -ldbm""... $ac_c" 1>&6
-echo "configure:2870: checking for dbm_open in -ldbm" >&5
+echo "configure:3079: checking for dbm_open in -ldbm" >&5
ac_lib_var=`echo dbm'_'dbm_open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldbm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2878 "configure"
+#line 3087 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:2889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
HESIOD_LIBS="-L$with_hesiod/lib"
fi
echo $ac_n "checking for res_send""... $ac_c" 1>&6
-echo "configure:2927: checking for res_send" >&5
+echo "configure:3136: checking for res_send" >&5
if eval "test \"`echo '$''{'ac_cv_func_res_send'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2932 "configure"
+#line 3141 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char res_send(); below. */
; return 0; }
EOF
-if { (eval echo configure:2955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_res_send=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for res_send in -lresolv""... $ac_c" 1>&6
-echo "configure:2973: checking for res_send in -lresolv" >&5
+echo "configure:3182: checking for res_send in -lresolv" >&5
ac_lib_var=`echo resolv'_'res_send | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3190 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
res_send()
; return 0; }
EOF
-if { (eval echo configure:2992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for hes_resolve in -lhesiod""... $ac_c" 1>&6
-echo "configure:3022: checking for hes_resolve in -lhesiod" >&5
+echo "configure:3231: checking for hes_resolve in -lhesiod" >&5
ac_lib_var=`echo hesiod'_'hes_resolve | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lhesiod $HESIOD_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3030 "configure"
+#line 3239 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
hes_resolve()
; return 0; }
EOF
-if { (eval echo configure:3041: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
KRB4_INCLUDES="-I/usr/include/kerberosIV"
fi
echo $ac_n "checking for krb_rd_req in -lkrb4""... $ac_c" 1>&6
-echo "configure:3075: checking for krb_rd_req in -lkrb4" >&5
+echo "configure:3284: checking for krb_rd_req in -lkrb4" >&5
ac_lib_var=`echo krb4'_'krb_rd_req | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb4 $KRB4_LIBS -ldes425 -lkrb5 -lcrypto -lcom_err $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3083 "configure"
+#line 3292 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
krb_rd_req()
; return 0; }
EOF
-if { (eval echo configure:3094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for krb_rd_req in -lkrb""... $ac_c" 1>&6
-echo "configure:3113: checking for krb_rd_req in -lkrb" >&5
+echo "configure:3322: checking for krb_rd_req in -lkrb" >&5
ac_lib_var=`echo krb'_'krb_rd_req | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb $KRB4_LIBS -ldes $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3121 "configure"
+#line 3330 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
krb_rd_req()
; return 0; }
EOF
-if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- KRB4_LIBS="-lkrb -ldes"
+ KRB4_LIBS="$KRB4_LIBS -lkrb -ldes"
else
echo "$ac_t""no" 1>&6
{ echo "configure: error: Kerberos 4 libraries not found" 1>&2; exit 1; }
LIBS="$TERMLIB $LIBS"
echo $ac_n "checking if an include file defines ospeed""... $ac_c" 1>&6
-echo "configure:3162: checking if an include file defines ospeed" >&5
+echo "configure:3371: checking if an include file defines ospeed" >&5
if eval "test \"`echo '$''{'nmh_cv_decl_ospeed_include_defines'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3167 "configure"
+#line 3376 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if HAVE_TERMIOS_H
ospeed = 0;
; return 0; }
EOF
-if { (eval echo configure:3180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
nmh_cv_decl_ospeed_include_defines=yes
else
if test $nmh_cv_decl_ospeed_include_defines = no; then
echo $ac_n "checking if you must define ospeed""... $ac_c" 1>&6
-echo "configure:3196: checking if you must define ospeed" >&5
+echo "configure:3405: checking if you must define ospeed" >&5
if eval "test \"`echo '$''{'nmh_cv_decl_ospeed_must_define'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3201 "configure"
+#line 3410 "configure"
#include "confdefs.h"
int main() {
extern short ospeed; ospeed = 0;
; return 0; }
EOF
-if { (eval echo configure:3208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3417: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
nmh_cv_decl_ospeed_must_define=yes
else
LIBS="$nmh_save_LIBS"
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:3243: checking return type of signal handlers" >&5
+echo "configure:3452: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3248 "configure"
+#line 3457 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:3265: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3474: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3284: checking for pid_t" >&5
+echo "configure:3493: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3289 "configure"
+#line 3498 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3317: checking for off_t" >&5
+echo "configure:3526: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3322 "configure"
+#line 3531 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3350: checking for uid_t in sys/types.h" >&5
+echo "configure:3559: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3355 "configure"
+#line 3564 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:3384: checking for mode_t" >&5
+echo "configure:3593: checking for mode_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3389 "configure"
+#line 3598 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3417: checking for size_t" >&5
+echo "configure:3626: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3422 "configure"
+#line 3631 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking for sigset_t""... $ac_c" 1>&6
-echo "configure:3451: checking for sigset_t" >&5
+echo "configure:3660: checking for sigset_t" >&5
if eval "test \"`echo '$''{'nmh_cv_type_sigset_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3456 "configure"
+#line 3665 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
sigset_t tempsigset;
; return 0; }
EOF
-if { (eval echo configure:3464: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3673: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
nmh_cv_type_sigset_t=yes
else
fi
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
-echo "configure:3485: checking for st_blksize in struct stat" >&5
+echo "configure:3694: checking for st_blksize in struct stat" >&5
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3490 "configure"
+#line 3699 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
struct stat s; s.st_blksize;
; return 0; }
EOF
-if { (eval echo configure:3498: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3707: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:3520: checking for tm_gmtoff in struct tm" >&5
+echo "configure:3729: checking for tm_gmtoff in struct tm" >&5
if eval "test \"`echo '$''{'nmh_cv_struct_tm_gmtoff'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3525 "configure"
+#line 3734 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
# include <sys/time.h>
struct tm temptm; temptm.tm_gmtoff = 0;
; return 0; }
EOF
-if { (eval echo configure:3541: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
nmh_cv_struct_tm_gmtoff=yes
else
fi
echo $ac_n "checking what style of signals to use""... $ac_c" 1>&6
-echo "configure:3562: checking what style of signals to use" >&5
+echo "configure:3771: checking what style of signals to use" >&5
if test $ac_cv_func_sigaction = yes -a $ac_cv_func_sigprocmask = yes; then
signals_style=POSIX_SIGNALS
cat >> confdefs.h <<\EOF
echo "$ac_t""$signals_style" 1>&6
echo $ac_n "checking where signal.h is located""... $ac_c" 1>&6
-echo "configure:3600: checking where signal.h is located" >&5
+echo "configure:3809: checking where signal.h is located" >&5
if eval "test \"`echo '$''{'nmh_cv_path_signal_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$nmh_cv_path_signal_h" 1>&6
SIGNAL_H=$nmh_cv_path_signal_h
+case "$target_os" in
+
+ solaris2*)
+ cat >> confdefs.h <<\EOF
+#define SYS5 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define SVR4 1
+EOF
+
+ ;;
+ irix*)
+ cat >> confdefs.h <<\EOF
+#define SYS5 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define SVR4 1
+EOF
+
+ ;;
+ osf*)
+ cat >> confdefs.h <<\EOF
+#define SYS5 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define SVR4 1
+EOF
+
+ ;;
+ aix*)
+ cat >> confdefs.h <<\EOF
+#define SYS5 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define SVR4 1
+EOF
+
+ ;;
+ sunos4*)
+ cat >> confdefs.h <<\EOF
+#define BIND 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD42 1
+EOF
+
+ ;;
+ linux*)
+ cat >> confdefs.h <<\EOF
+#define LINUX_STDIO 1
+EOF
+
+ ;;
+ freebsd*)
+ cat >> confdefs.h <<\EOF
+#define BIND 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD42 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD44 1
+EOF
+
+ ;;
+ netbsd*)
+ cat >> confdefs.h <<\EOF
+#define BIND 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD42 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD44 1
+EOF
+
+ ;;
+ openbsd*)
+ cat >> confdefs.h <<\EOF
+#define BIND 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD42 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD44 1
+EOF
+
+ ;;
+ bsd/os*)
+ cat >> confdefs.h <<\EOF
+#define BIND 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD42 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define BSD44 1
+EOF
+
+ ;;
+ sco5*)
+ cat >> confdefs.h <<\EOF
+#define SYS5 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define SCO_5_STDIO 1
+EOF
+
+ ;;
+esac
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
s%@VERSION@%$VERSION%g
s%@MTS@%$MTS%g
s%@MTSLIB@%$MTSLIB%g
nmh configuration
-----------------
nmh version : ${VERSION}
+target os : ${target}
compiler : ${CC}
compiler flags : ${CFLAGS}
linker flags : ${LDFLAGS}
projects / mmh / blobdiff