1 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * Applied, after some finessing,
4 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
6 Here's a patch that allows you to add
8 --with-smtpservers=<some.host.name>
10 to the ./configure command line to set the "servers: " line in
11 etc/mts.conf. Around here, we use "mailhost" so that all
12 machines in the current domain just talk to a central machine
13 and nothing else runs an MTA. Now, I can use
15 --with-smtpservers=mailhost
17 instead of having to remember to fix this by hand (and often
18 forgetting to do so!).
20 * Inspired by Simon's patch, added an --enable-masquerade option
21 to configure. It will set the "masquerade:" line of mts.conf.
22 You may specify a subset of the three types of masquerading, like
23 --enable-masquerade="draft_from mmailid", or leave off explicit
24 arguments to enable all three types.
26 * Alphabetized the --enable and --with options in configure.in and
27 INSTALL and added documentation of the two new options to the latter.
29 * Added new dependency for mts.conf: Makefile. If this isn't
30 done, then when you reconfigure nmh with new values for
31 --enable-masquerade or --with-smtpservers, you'll fail to get an
32 updated copy of mts.conf.
34 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
36 It seems that some MUA's didn't handle y2k very well - ELM
37 seems to be one of them, and Ultrix's DXmail (based on MH!).
38 I've got a few emails this month that look like:
40 575 Jan 00 Xxxxxx Xxxx 3603 ...
42 22+ Jan 00 Xxx Xxxxx 1771 ...
44 The first has "15 Jan 100" as the date and the second has
45 "19 Jan 00" as the date. The following works around this so
46 that scan, show, sortm, etc work ok.
48 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
51 * Added scan.MMDDYY and scan.YYYYMMDD format files.
53 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
55 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
57 With the patch below, you can add lines like:
59 mhshow-suffix-application/msword: .doc
60 mhshow-suffix-application/PostScript: .ps
62 to the mhn.defaults file to append the given suffix to a
63 scratch file. This allows applications which require a
64 certain suffix to run properly.
66 * Removed -force_html from lynx entry in mhn.defaults.sh (I
67 believe older versions of lynx lack that option) and added
68 "mhshow-suffix-text/html: .html".
70 * Modified username_extension masquerading to only use the
71 extended address on generated [Resent-]From: lines and SMTP
72 envelope From:. With Neil's original implementation, nmh's global
73 idea of the username was changed, which would result in inc lying
74 and saying you had no new mail because it was looking for a
75 mailbox called, for instance, "dan-nmh" (where username was "dan"
76 and $USERNAME_EXTENSION was "-nmh").
78 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
80 There's a wrap-around problem that affects the implementation
81 of Zeller's congruence in dtime.c. This causes the day-of-week
82 calculations to fail for dates after Feb 29, 2000 (probably up
83 until some year far in the future).
85 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
87 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
89 I finally tracked down the problem in msh that was causing
90 errors whenever I tried to examine a 'mmdf' style mailbox.
92 It turns out that not enough memory was being allocated with
93 calloc(), causing memory pointers to be overwritten and
96 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
98 * Changed the new "plussed_user" option to mts.conf's
99 "masquerade:" to "username_extension" after getting feedback from
100 qmail users, who use '-' as a separator rather than '+'. Removed
101 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
102 which needs to include the appropriate separator for your MTA
103 ('-', '+', or whatever) as its first character.
105 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
107 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
109 * Added a note to DIFFERENCES stating that it's out-of-date
110 (Richard was the last one to update it) and that we should
111 consider only documenting incompatibilities with MH there.
113 * Implemented (and documented) a third kind of username
114 masquerading: "plussed user" masquerading. This one was suggested
115 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
116 "plussed user" feature, where mail sent to <user>+<string> will be
117 delivered to <user>. When it's enabled, it's controlled by the
118 $USERPLUS environment variable. How is it enabled? Well, that
121 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
122 changed it so that rather than being a boolean, it can be set to
123 any combination of the three values "draft_from", "mmailid", and
124 "plussed_user". Thus it is now possible to enable the three types
125 of masquerading individually.
127 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
128 where if it was turned on, ','s would no longer be considered
129 GECOS field delimiters.
131 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
133 * Changed the GECOS-field '&' translation behavior to be
134 controlled by the BSD42 #define rather than GCOS_HACK, since it's
135 apparently always appropriate on OSes where BSD42 is #defined, and
136 never appropriate on any other OSes. Thanks to Kimmo Suominen for
137 responding to my "What is this code here for?" comment in mts.c
138 and explaining the feature.
140 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
142 * Upped the version number to 1.0.3+dev (ideally this should be
143 done by whoever makes a release tar file, immediately after doing
146 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
147 patch, posted to comp.mail.mh, which he says prevents loss of mail
148 when inc'ing into a full filesystem.
150 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
151 so that stamp-h.in will be different each time configure.in and
152 related files are changed, making it easier to check it in (which
153 is necessary to prevent unnecessary autoconf calls).
155 * My declaration of initgroups() in slocal.c to eliminate the "no
156 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
157 use AC_EGREP_HEADER to see where initgroups() is declared, if
160 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
162 * Fix security hole in mhshowsbr.c which allowed untrusted shell
165 * Released nmh 1.0.3.
167 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
169 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
170 be surrounded by single quotes, as a shell is not spawned when
171 just saving files, and the filenames will end up with literal
172 quotes embedded in them.
174 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
176 * Whoever originally added the -help switch to all the commands
177 got too cute and had the option itself print out as "-(help)" in
178 the -help output. I guess the idea was to make reference to the
179 fact that clearly you know about the -help option since you're
180 currently looking at its output. I think it's a bad idea to
181 overload the meaning of the parentheses, however -- they're
182 supposed to indicate what abbreviated prefix of the switch you're
183 allowed to specify. It doesn't make sense to show that you're
184 allowed to "abbreviate" the switch to its entire length.
186 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
188 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
190 The following patch fixes a problem with requesting a
191 service key for a machine that has multiple 'A' records. It
192 also makes "-kpop" a command line option, for users who
193 would like to use both "kpop" and "pop".
195 Did no testing of the new features, as I don't have access to a
198 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
200 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
202 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
204 * All %-escapes in mhn.defaults that actually expand to something
205 should be surrounded by single quotes. Added quotes to the ones
206 in mhn.defaults.sh that were missing them.
208 * Added check for lynx to write mhshow-show-text/html line in
211 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
213 * makedir() had multiple bugs dating back to MH. It passed an
214 octal constant to atoi(), which interpreted it as decimal,
215 resulting in directories with no user read or execute permissions,
216 making nested directory creation fail. Also, when creating a
217 nested directory, correct permissions were only set on the inner one.
219 * A second `make install' would always fail because the check for
220 whether mh_profile.5 existed was written incorrectly.
222 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
224 * Added documentation on both types of masquerading to post's man
227 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
229 * Doug's portability fix of my setgid inc autodetection had a
230 caching bug -- if you re-ran configure, uip/Makefile would be
231 corrupted, and installation would bomb out on OSes where inc needs
234 * Implemented a new kind of email address masquerading. Usually,
235 when a user writes a custom "From:" header in a draft, nmh uses it
236 rather than generating one. However, the user's true address is
237 used in the SMTP envelope "From:" and is revealed in the "Sender:"
238 header. Now, when mmailid is set to non-zero, the envelope
239 "From:" uses the address specified in the draft "From:" header,
240 and there is no "Sender:" header. This is useful when sending on
241 behalf of a remote POP3 account or when remote mail robots
242 incorrectly use the envelope "From:" in preference to the body
243 "From:". This processing has only been implemented for post, not
244 for the undocumented spost (which was already missing some "From:"
245 processing that post has).
247 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
249 * Got rid of the rest of the gcc -Wall warnings that I didn't have
250 time for on 1999-07-15 (and, it would seem, some new ones people
251 introduced since then). The primary ones were the warnings that
252 default prototypes were being used for [v]snprintf() and
253 str[n]casecmp(). As of right now, there are _no_ compilation
254 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
257 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
259 * Move mhtest from bindir to libdir.
261 * Move sendfiles from libdir to bindir.
263 * Updated sendfiles manpage to reflect this change.
265 * Added documentation for -build and -file switches to repl and
266 forw manpages (patch from Peter Maydell).
268 * Fixed interaction between specifying -cc in profile and -group on
271 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
273 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
274 not unanimous support for my proposed even/odd release/developer
275 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
278 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
280 * Upped the version number to 1.0.3. If we don't do this, then
281 when people report bugs against 1.0.2, we won't know "which" 1.0.2
282 they're talking about (since the development source is publically
283 available via CVS). I think the Linux kernel version numbers are
284 a good model, so the next time we roll a tarball, it should be
285 version 1.0.4 (or higher -- anyhow, an even-numbered version).
287 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
289 * Released nmh-1.0.2.
291 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
293 * Added check for whether "libtool" is in fact gnu libtool. If
294 it is, it is not used. This is the wrong behavior. If vendor
295 XYZ later on decides to create yet another libtool, we'll be
296 caught again. This works for now.
298 * Minor updates to MACHINES refering to Mac OS X.
300 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
302 * Added check for "libtool" (a ranlib type tool for Mac OS X)
303 and modified Makefiles so that nmh will build under Mac OS X.
305 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
307 * Changed repl defaults to partly revert to MH behaviour,
308 "-cc all" is now only implied with -group.
310 * The replcomps template includes cc: header again (as in MH).
312 * Updated repl man page to reflect these changes.
314 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
316 * Tweaked configure to handle Solaris and SunOS after the BIND
317 changes. Both need more cleanup.
319 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
321 * Removed BIND define and replaced it with a check for
322 gethostbyname (to determine if the host is DNS aware) and a
323 check for sethostent. This appears to be the right thing to
324 do, but there is no explanation of the reasoning behind the
325 BIND define in the code and it appears to have been used for
328 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
330 * Updated manpages Makefile to link mh-profile.5 to
331 mh_profile.5 after installation. Suggestion from Richard Cohen
332 <richard@jubjub.demon.co.uk>.
334 * Modified configure.in to check for _IO_write_ptr and libio.h
335 to determine whether to define LINUX_STDIO instead of using
338 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
340 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
341 multiple machines in the past where the mail spool was a symlink
342 to a directory on another device with more free space.
344 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
346 * Fixed a portability problem in Doug's fix of a portability
347 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
349 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
351 * Added config.sub and config.guess to the list of files to be
354 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
355 added if a list of addresses was split over several header lines.
357 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
358 macros, regardless of platform.
360 * Allow q to quit mhshow, and n to skip to next part. Patch from
361 Kimmo Suominen <kim@tac.nyc.ny.us>.
363 * Modified mhstore to recognize attachments created by sendfiles
364 with x-conversions=gzip.
366 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
368 * added explicit cast to long from time_t for tclock in
371 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
372 it's needed for ioctl() anyway. This prevents a warning about
373 implicit definition of ioctl().
375 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
376 "User Configuration" section of config.h (moved @TOP@ in
377 acconfig.h) so they're easier to find, should someone actually
378 want to mess with them.
380 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
382 * updated Makefile.in so it recognized COMPLETION-TCSH and
383 COMPLETION-ZSH (only used in make nmhdist).
385 * added prototype for ruserpas to <h/prototypes.h>. Fixes
386 warnings in mhparse.c and mhbuildsbr.c.
388 * added include checks for <time.h> and <sys/time.h> to
389 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
390 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
392 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
393 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
394 warnings about implicit definition of mts_init().
396 * added <grps.h> to slocal.c to prevent warnings about
399 * added <h/signals.h> to prevent warning about missing SIGNAL
402 * added function prototypes to smtp.c, whatnowproc.c,
403 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
406 * explicitly declared mbx_style in mshcmds.c and lused in
407 fmtdump.c as type static int instead of just static to
410 * various code cleanups to prevent ambiguous statements
411 (brackets for if/thens and parens for complicated if
415 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
417 * commented out _cleanup() in mf.c because it's the only
418 location in all of the source code where it exists. It was
419 preventing compilation on at least linux.
421 * Added check for <db1/ndbm.h> which is the new location where
422 linux systems appear to be stuffing this header file.
424 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
426 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
428 * added mh_profile SEGV patch from Richard Cohen
429 <richard@jubjub.demon.co.uk> that prevents crashing when
430 mh_profile doesn't end in a newline. A similar patch was
431 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
433 * fixed bug in associated with MAILGROUP #define (group "mail"
434 is not universal) -- hard to believe, but true.
436 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
438 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
440 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
442 * Automated #define of MAILGROUP and installation of inc as setgid mail
443 when the mail spool directory isn't world-writable.
445 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
447 * slocal -debug used to leave a file in /tmp for each message
448 processed. Very bad for folks with slocal -debug in their .forward!
450 * Got rid of a ton of compilation warnings. Most were "junk"
451 warnings due to the use of gcc -Wall (without -Wno-parentheses),
452 but a few represented real bugs. There remain many warnings to be
453 tackled that are due to missing function prototypes (e.g. snprintf()).
455 * Default rcvdistcomps no longer puts a copy of all outgoing
456 messages in outbox. Added an rcvdistcomps.outbox that does.
458 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
460 * Updated configure to check for mkstemp (available on OpenBSD) and
461 substitute it for mktemp if available.
463 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
465 * Added config.sub and config.guess and updated acconfig.h and
466 configure.in to automatically detect system type and set the
469 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
471 * Released nmh-1.0.1.
473 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
475 * Fixed flist to properly deal with relative folder names.
476 Problem noted by Jerry Peek <jpeek@jpeek.com>.
478 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
479 well as the Kerberos 5 compat libraries. Based on a patch from
480 Assar Westerlund <assar@sics.se>.
482 * Added a check in configure.in to test if modf is in libc and
483 link with libm if not. This is needed by at least Digital UNIX.
484 Problem pointed out by Kevin Oberman <oberman@es.net>.
486 * Fix a bug from the "mhn -show" to "mhshow" renaming that
487 made the "list" command in whatnow not work for some users.
488 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
490 * Replaced "extern int errno" with "#include <errno.h>" in a
491 number of files. Suggested by Stephen Wilson Bailey
494 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
495 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
497 * Fixed a segmentation fault in inc. Patch originally from Ruud de
498 Rooij <r.c.m.derooij@twi.tudelft.nl>.
500 * Allow display of 8bit encoded messages. From Kimmo Suominen
503 * Fixed repl to not add line breaks in the middle of long
504 addresses when building a reply. From Ruud de Rooij
505 <r.c.m.derooij@twi.tudelft.nl>.
507 * Added -library switch to spost so it can parse user aliases like
508 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
510 * Changed configure.in's check for sigsetjmp to properly deal
511 with systems like Linux where it is a macro. From
512 <elleron@servtech.com>.
514 * Fixed a bug in whatnow that could cause it to sometimes exit
515 without prompting the user. Based on a patch by Richard Geiger
518 * Added code to deal with SIGPIPE in mhl so it doesn't print
519 "Broken pipe" if you quit out of the moreproc.
521 * Documentation: Added a note to MACHINES about Irix make. Added a
522 pointer to the online copy of the MH book in INSTALL. Added
523 some additional information to the whatnow and packf man pages,
524 suggested by Jerry Peek <jpeek@jpeek.com>.
526 * Updated INSTALL, FAQ, etc to not refer to Richard as the
527 maintainer or math.gatech.edu as the home any more.
529 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
533 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
534 mbx_open so that the mode of zero length maildrops
535 would not be changed.
537 * Replaced the substitute version of snprintf() with the
538 one from the Apache web server.
540 * Changed to default mode for creating new messages to 0600
541 (this should have been done a long time ago).
543 * Changed "flist" to handle searching for multiple sequences
544 for each folder. Also flist will now correctly split
545 Unseen-Sequence if it consists of multiple sequences.
547 * Added new switches `-unlink' and `-nounlink' to "refile".
549 * Added new switches `-unlink' and `-nounlink' to "rmm".
551 * More cleanups of slocal output. Changed adorn() to
552 send to stdout, instead of stderr (to match rest of
555 * Merged mbx_create() into mbx_open, so that creating and
556 opening a nonexistent maildrop is done atomically. This
557 removes a bad race condition.
559 * Fixed bug that caused slocal to be unable to save to MMDF
562 * Added new wrapper function usr_folder() to slocal.c to
563 handle adding message to folder (currently, it still uses
564 usr_pipe() to call rcvstore).
566 * seq_list() checks for empty folder before scanning for
567 sequence information.
569 * num_digits() in flist.c and folder.c now returns correct
570 value for 0. Also added sanity check.
572 * folder_delmsgs() now correctly decrements internal message
575 * Don't attempt to read sequence information if folder
578 * Split seq_read into seq_public and seq_private.
580 * Small change to sigmsg.awk, since newer versions of gawk
581 interpret 034 as octal.
583 * In flist, don't scan for sequence information in empty folder.
585 * Updated mhn.defaults.sh to output profile entries for mhshow,
586 mhstore, and mhbuild.
588 * Changed configuration parameter "mhn-access-ftp" to
589 "nmh-access-ftp". Updated man pages
591 * Moved the code in InitMultipart to reverse the order of the
592 parts in a multipart, into its own function "reverse_parts()".
594 * Changed code in mhbuildsbr.c to store unencoded content
595 in the c_cefile structure when building.
597 * Changed code in mhoutsbr.c to look for unencoded content
598 in the c_cefile structure when outputing message.
600 * Changed configuration parameter "mhn-cache" and
601 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
602 since it is used in mhstore, mhlist, and mhshow. Updated man pages
604 * Change configuration parameter "mhn-storage" to
605 "nmh-storage", since it is now used in mhstore, mhlist,
606 and mhshow. Updated man pages
608 * Add autoconf support for KPOP (kerberized pop).
610 * Add autoconf support for Hesiod.
612 * Split routines to output a message given a Content structure
613 (output_message, output_content, write7Bit, etc..) to a new
616 * Split output_content(), into output_content() and build_headers().
618 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
619 list of header fields, rather than reopening the message.
621 * Added free_header() to mhfree.c to free structures containing
622 header field information.
624 * Changed get_content() to use the linked list of header fields
625 when parsing the various MIME headers (Content-XXX).
627 * Changed get_content() to store linked list of header field
628 values when parsing a content.
630 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
631 routines in mhcachesbr.c to handle the content cache.
633 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
634 cache_content) into new file mhcachesbr.c.
636 * More calls to sprintf/strcpy (primarily in mhparse.c
637 and mhbuildsbr.c) converted to snprintf/strncpy.
639 * When a message is displayed with `mhshow', it is now
640 removed from the "unseen" sequence.
642 * Change the default "showmimeproc" to "mhshow".
644 * Split "mhn -show" off into separate command "mhshow".
646 * Split "mhn -store" off into separate command "mhstore".
648 * Split "mhn -list" off into separate command "mhlist".
650 * Add sanity checks to context_find(), context_replace(),
651 and context_del(), to abort if context file hasn't been
654 * Add calls to context_read(), to the beginning of all nmh
655 commands (instead of being called indirectly by context_find).
657 * Changes the "substitute" version of vsnprintf/snprintf for
658 operating systems without native versions, to just call the
659 native vsprintf(), and ignore the buffer length. This is
660 faster, but less secure than the previous version that used
661 temporary files. This should only be a problem for systems
662 which do not have a native snprintf(), and require `inc' to
665 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
667 * Changes client() routine to take additional parameter, which is
668 the buffer length of the parameter "response". Then added
669 buffer length checks for this parameter.
671 * Changed getws() to get_fields(), since that is apparently the
672 name of a wide character version of gets() on some archetitures.
674 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
676 * Change the code in most of the commands that take multiple
677 message names/sequences/ranges on the command, such that
678 the msgs array is expanded dynamically. This removes most
679 of the limits on the length of command lines.
681 * Add additional parameter to copyip(), to specify the
682 maximum number of strings that can be copied (security
685 * Create new function getarguments(), to massage the argument
686 vector before parsing it (add any arguments from your
687 profile to the beginning of the argument vector). This
688 also removed the general limit on the number of command line
691 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
695 * Added a new command "delete", that is available during
696 a "whatnow" session. It is equivalent to "quit -delete".
698 * Added another parameter to editfile (in whatnowsbr.c),
699 that controls whether editfile should remember the last
700 program that was exec'ed. This way the whatnow command
701 "mime", will not be re-executed if "edit" is later given
704 * Changed whatnowsbr.c, so that whatnow doesn't abort if
705 mhbuild returns an error.
707 * Added parameter to sendsbr(), so you may specify whether to
708 rename the draft file.
710 * Pass delay time to splitmsg() as a parameter, rather than
711 use a global variable.
713 * Moved code to rename draft file after sending message from
714 splitmsg and sendaux, to sendsbr.
716 * Removed all the code in viamail to split messages and then
717 mail them. Replaced this with the standard sendsbr.c routines.
719 * Changed sendsbr(), so that when splitting messages into
720 messages of type "message/partial", the header fields that
721 are copied are more compliant with RFC-2046.
723 * Fixed mhbuild to track temporary files better. They are
724 now correctly removed when mhbuild aborts.
726 * Created a new man page for "sendfiles". The information
727 about "mhn -viamail" in the "mhn" man page was moved to
730 * Changed the name of the "viamail" shell script to
731 "sendfiles". Modified "sendfiles" to use the new
734 * Moved the functionality for "mhn -viamail" out of mhn,
735 and into a separate executable called "viamail".
737 * When storing MIME contents to a folder using mhn -store,
738 they are now accumulated in a temporary file, and then added
739 to the folder using folder_addmsg().
741 * Moved code to save content to a folder from store_content
742 to new function output_content_folder.
744 * Moved code to save content to file from store_content to
745 new function output_content_file.
747 * Moved code to parse storage format string from store_content
748 to new function parse_format_string.
750 * Fix copy_some_headers() in mhstoresbr.c, so that the
751 correct header fields in the first enclosing message/partial
752 will be copied (according to RFC2046), when using mhn -store
753 to reassemble messages of type message/partial.
755 * Fixed bug to openFTP() in mhparse.c, that caused the
756 tmp file to not be removed, when transferring a
757 message/external file from ftp.
759 * Moved the code in mhparse.c to process -auto switch (scan
760 contents for the attribute "name"), to a new function
761 "get_storeproc" in mhstoresbr.c.
763 * Moved routines to free data structures related to MIME
764 content from mhparse.c and mhbuildsbr.c, to new file
767 * Moved code to show/display MIME content into new
770 * Moved code to store MIME content from into
771 new file mhstoresbr.c
773 * Moved code to parse MIME content into new
776 * Moved code to list information about MIME content
777 into new file mhlistsbr.c.
779 * Move part_ok(), type_ok(), content_error(), flush_errors(),
780 and set_endian() to new file mhmisc.c.
782 * Start to isolate the code to show, list, and store MIME
783 messages. One side effect is that only one flag (-show,
784 -list, or -store) can be used at a time now.
786 * mhn -store -auto wasn't storing file in correct directory.
788 * Removed a few dead variables from sbr/ruserpass.c
790 * move code for creating tmp files, and renaming the
791 the composition draft in mhbuild, from build_mime()
794 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
795 the -[no]auto switch (which isn't used in mhbuild).
797 * split mhn.c into mhn.c and mhnsbr.c (name later changed
800 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
802 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
806 * Added (unlisted) options [no]dashstuffing to send, post,
807 and whatnow to determine whether to do RFC934 quoting
808 (dashstuffing) for encapsulated BCC messages. The default
809 is still the same (dashstuffing).
811 * Changed the undocumented feature "nodashmunging" in forw
812 and mhl, into the documented feature "nodashstuffing". The
813 default for forw, is still "dashstuffing" for backward
814 compatibility, although I don't believe that bursting
815 RFC934 digests is very common anymore.
817 * Added an option to define REALLYDUMB in the default config.h.
818 But it is not on by default.
820 * moved creation of config file mts.conf from zotnet/mts
821 to etc. This simplified the Makefile in zotnet/mts.
823 * simplified directory support/general to etc.
825 * removed unneeded directory support/bboards.
827 * split getusername() into getusername() and getuserinfo().
829 * Changed getusr() routine to getusername().
831 * Slight cleanup in folder_pack.c on code that records the new
832 number of the "cur" message when packing.
834 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
838 * Change install process, so that hard linking the correct mts
839 library to libmts.a, is not necessary. The final link process
840 uses the original name of the library.
842 * Fixed bug in flist.c and folder.c, so that symbolic links which
843 point to directories, will not decrement the number of directory
846 * Split the function list_content (in mhn.c and mhbuild.c) into
847 list_content and list_debug.
849 * Don't pack (folder -pack) an empty folder.
851 * Exit gracefully in flist.c, if no sequence is specified,
852 and no "Unseen-Sequence" is given in nmh profile.
854 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
858 * Small clarification to the man page for `ali'.
860 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
861 are given, that order doesn't matter.
863 * Fix bug in seq_list.c when realloc'ing for
866 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
870 * Add new section on "Transfer Encodings" to man page for mhbuild.
872 * In mhbuild.c, split compose_content into compose_content
873 (parse and execute composition string), and scan_content (scan
874 content, decided transfer encoding, check for clash with boundary
875 string). I did a good amount of rearranging of this code.
877 * Moved definitions for data structures for parsing MIME
878 messages from mhn.c and mhbuild.c to a new include
881 * Small amount of rearranging in sendsbr.c
883 * Small changes to MAIL.FILTERING file.
885 * Add the file MAIL.FILTERING to nmh distribution.
887 * Add line to packf so that if message begins with
888 "X-Envelope-From:" field, it is converted to "From ".
890 * Fix packf to add "From " line to beginning of message,
891 even if Return-Path doesn't exist.
893 * Add note to MACHINES file that on Linux, configure
894 doesn't find the functions sigsetjmp/siglongjmp.
896 * Fix configuration for machines that don't have (or find)
897 sigsetjmp/siglongjmp.
899 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
903 * Add a configure check for sigsetjmp. Add some conditional
904 #define's in h/signals.h in case it's not found.
906 * Added additional notes about -auto switch in mhn man page.
908 * Added note about MM_CHARSET environment variable to
909 mh-profile(5) man page.
911 * Fix signal problem in mhn.c (change setjmp/longjmp to
912 sigsetjmp/siglongjmp).
914 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
916 * Released nmh-0.22-pre1.
918 * Changed the first line in mhl.format from
919 " -- using template mhl.format -- " to a blank line.
921 * Added note about automimeproc to mh-profile man page.
923 * Reorganize the main entry point for parsing a MIME message
924 or file in mhn. Add new function parse_file() as new main
925 entry point for parsing MIME files.
927 * Add note to mhn man page, that "mhn -file -" will accept the
928 source message on the standard input.
930 * Changed a sanity check in folder_realloc that was too strict.
932 * -norfc934mode is now the default for mhbuild,
933 rather than -rfc934mode.
935 * Fix mhbuild, so that Content-Description and RFC-822 comments
936 from #forw directive will be correctly included if there is
939 * Change mhn to correctly default parts of multipart/digest to
940 message/rfc822 (leftover code from rfc934mode was removed).
942 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
945 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
949 * If the file given to mhbuild is "-", then accept the draft on
950 standard input, and output the MIME message to standard output.
952 * Cleaned up code in mhbuild.c that decides what transfer
955 * Cleaned up code in mhbuild.c that decides what character set
956 to use for text contents.
958 * Removed old hpux specific code from zotnet/tws/lexstring.c
960 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
962 * Released nmh-0.21-pre2.
964 * Added the "decode" variable to mhl.format and mhl.header.
966 * Added new variable "decode" to mhlsbr.c to decode text in
967 header fields as per RFC-2047.
969 * Make sure that when decoding RFC-2047 header fields, that any
970 spaces at the ends of the encoded text are not ignored, but the
971 spaces between encoded word are.
973 * Removed #ifdef's for MIME. MIME support is always compiled in.
975 * scan/inc will now decode both Subject and From lines as
976 RFC-2047 encoded header fields.
978 * Added new function write_charset_8bit() to sbr. It returns
979 the character set to use for 8bit text in composition draft.
980 Changed mhbuild to use this function.
982 * Split mhn man page into man pages for mhn and mhbuild.
984 * mhn -show will only now only use default method for content
985 of type plain, if it is NOT a part of a multipart/alternative.
987 * Split mhn -build into mhbuild. Did some code cleanup.
989 * Added support for %(decode) to fmtdump.c.
991 * check_charset() now accepts US-ASCII as a subset of any
992 ISO-8859-X character set.
994 * Changed the default "showproc" to mhl, instead of the
997 * When reading file into mhn composition file, only need read
998 permissions, not write permissions.
1000 * Added own version of strcasecmp to distribution, since
1001 nmh calls it frequently with NULL pointers (ughh).
1003 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1006 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1008 * Released nmh-0.21-pre1.
1010 * If a message is missing charset parameter to text/plain, show
1011 will assume US-ASCII, rather than just calling showmimeproc.
1013 * Change show.c and mshcmds.c to use check_charset to see if text
1014 message contains valid character set.
1016 * Added new scan format file "scan.nomime" to support/general
1017 that doesn't do any RFC-2047 decoding.
1019 * Modified all the scan format files in support/general to do
1020 RFC-2047 decoding of Subject field.
1022 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1023 ignore whitespace between two valid encoded words, but not
1024 between an encoded word and normal text.
1026 * Created new file sbr/check_charset.c. Moved code from
1027 fmt_rfc2047.c to check for valid character set to this file.
1029 * Added format escape %(decode) to decode contents of "str" register
1030 as a RFC-2047 header field.
1032 * The command install-mh now recognizes the switches -version
1035 * Added a new argument to print_help.c to decide whether to
1036 print profile entries (needed for install-mh to prevent weird
1039 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1040 is initialize to max (mp->lowmsg, 1) rather than always 1.
1042 * Changed macros for sequence/attribute manipulation so that
1043 message status array doesn't need to always start at 1.
1045 * Small cleanups in folder_realloc().
1047 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1049 * Released nmh-0.20.
1051 * Added configure option --with-pager=PAGER.
1053 * Added configure option --with-editor=EDITOR.
1055 * Changed the default format file for mhl (mhl.format) to
1056 also ignore (not display) the header fields Content-Type,
1057 Content-Transfer-Encoding, and Content-ID
1059 * Fixed core dump in addrsbr.c when using %(proper) format function
1060 and the To: line was missing.
1062 * Added the file ZSH.COMPLETION to the distribution.
1064 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1066 * Released nmh-0.20-pre2.
1068 * Added new switch -snoop to both `msgchk' and `inc', so you can
1069 watch the POP transaction.
1071 * Changed "replgroupcomps" to check for Mail-Followup-To header
1072 first, and use it if available.
1074 * Changed "replcomps" to check for Mail-Reply-To header
1075 first, and use it if available.
1077 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1079 * Released nmh-0.20-pre1.
1081 * Changed seq_list.c to dynamically enlarge the buffer for
1082 collecting the message ranges in a long sequence line.
1083 This should remove the last hard limit on the size of a
1086 * Changed seq_read.c so that can read long sequence lines.
1087 It will use multiple calls to m_getfld() when m_getfld()
1088 returns the state FLDPLUS.
1090 * Changed brkstring.c to dynamically add more space for pointers
1091 if necessary. This is needed when splitting up large sequence
1094 * Did some small cleanups in seq_save.c.
1096 * Added new switches `-[no]unseen' to rcvstore, to control
1097 whether new messages are added to Unseen-Sequence.
1099 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1101 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1102 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1104 * Changed "replcomps" to not include CC and TO lines so that
1105 that reply message is only directed at the author of the
1106 message to which you are replying.
1108 * Added new switch `-group' to command repl, which causes repl
1109 to use new forms file "replgroupcomps". This is intended for
1110 making group replies.
1112 * Removed #ifdef for ATHENA.
1114 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1116 * Released nmh-0.19.
1118 * Fix repl,forw so that switch `-form file' will not abort
1119 as ambiguious (silly mistake on my part).
1121 * Cleaned up the mhn man page. Added info about a few escapes
1122 for the formatting/display strings that were not documented
1123 (%%, %t). Moved the BNF grammar for the mime composition file,
1124 to the end of the man page.
1126 * Added the options -[no]format to the command repl. The
1127 switch `-format' will filter the message to which you are
1128 replying with the standard message filter "mhl.reply", which
1129 is now included in the distribution. The `-noformat' option
1130 will negate the use of -format or -filter and not include
1131 the message to which you are replying in the draft.
1133 * Did some cleaning and reorganization on many of the man
1136 * Added debugging switch `-debug' to mhparam, which displays
1137 the values of all `procs' (and some other misc configuration
1138 info) that nmh keeps in global variables.
1140 * When using `refile -preserve', if a conflict occurs, then use
1141 the next available number above the message number you wish
1144 * In forw.c, split the code for creating MIME style forwarding
1145 out of copy_draft, and into copy_mime_draft.
1147 * Move routines in mark.c to print sequences, into new
1148 file sbr/seq_print.c
1150 * flist will now update the current folder.
1152 * Added the switches -[no]fast to flist, to replace
1153 -[no]total. The previous switches are still accepted
1154 but now undocumented.
1156 * More reorganization in flist of the code for
1159 * The command "flist +foo -all" will now scan the folder
1160 "foo" and all its 1st level children.
1162 * Add missing include file <h/mh.h> to sbr/snprintf.c
1164 * Fix alarm bug in rcvtty, so that when it calls external
1165 process, the alarm is never longer than 30 minutes.
1167 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1169 * Released nmh-0.18.
1171 * Fixed bug in mark, so that "mark -list -seq foo" will
1172 correctly indicate if "foo" is a private sequence. I found
1173 this bug mentioned in Jerry Peek's book.
1175 * Simplified the code in seq_setcur(), since seq_addmsg() now
1176 retains the public/private status of sequences.
1178 * Changed sequence handling so that if the switches -public
1179 or -nopublic, are not specified for the commands mark, pick,
1180 or rcvstore, then existing sequences will retain their
1181 previous public/private status.
1183 * mhparam now handles the mh-sequences profile entry
1186 * flist -all will now also check readonly folders (for
1189 * Improve the leaf optimization for folder command.
1190 It will now track the number of directories in a folder,
1191 and stop stat'ing files once it has hit all the subfolders.
1193 * Renamed m_getfolder to getfolder. Changed getfolder to
1194 take option to determine whether it should get current
1195 folder, or just default folder (Inbox). Changed rcvstore,
1196 inc, and rmf to use the new getfolder.
1198 * flist now indicates if a sequence is private.
1200 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1201 wait for stopped processes.
1203 * conflict will dynamically allocate space for group names,
1204 so it can now handle system with more than 100 groups.
1206 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1208 * Released nmh-0.18-pre4.
1210 * Check if we have enough message status space, before we
1211 call folder_realloc() in burst, mhpath, and m_draft().
1213 * mhn will now correctly identify a formatting string of "-"
1214 for the option -store, and send content to stdout.
1216 * Change the way that memory for message status is
1217 allocated. It is dynamcially allocated separately from
1218 the folder/message structure. This required changing
1219 folder_read.c, folder_realloc.c, folder_free.c.
1221 * Removed all the MTR code (experimental code for message
1224 * Renamed m_readfolder.c to folder_read.c and simplified
1227 * Renamed m_freefolder.c to folder_free.c.
1229 * Add function trim() to slocal.c to pretty print
1230 the debugging output.
1232 * Changed the name of m_packfolder() to folder_pack().
1233 Changed the name of m_remsg() to folder_realloc().
1235 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1237 * Released nmh-0.18-pre3.
1239 * Changed installation to add `flists' which is hard linked
1240 to `flist'. This is a equivalent to `flist -all'.
1242 * For flist, -showzero is on by default.
1244 * Major changes to flist. Default is now for flist to search
1245 current folder. The switch `-all' is now used to specify
1246 searching all top level folders. The new switch `-showzero'
1247 is used to print out folders that don't contain any messages
1248 in the given sequence.
1250 * Split BuildFolderList in flist.c into 2 functions
1251 (BuildFolderList, BuildFolderListR). Changed these functions
1252 so that flist now does better leaf optimization, and will stop
1253 stat'ing directory entries when it knows it has hit all the
1254 subdirectories of a given directory.
1256 * Reorganized code in folder.c, so that all relevant folders
1257 are scanned first and information recorded. Then all the
1258 folder summaries at printed out at one time.
1260 * Made the options of folder(s) more orthogonal. Now
1261 "folder -all -noheader -nototal" will do the right thing.
1263 * Added `-noall' switch to folder, for completeness.
1265 * Changed the default mode for creation of new folders
1268 * Slightly changed the format for flist. It now indicates
1269 if a folder is current. Also the width of the various
1270 fields are now calculated at runtime.
1272 * Changed the format for folder(s). Folder names
1273 are now left justified. The width of the various fields
1274 are calculated at runtime.
1276 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1278 * Released nmh-0.18-pre2.
1280 * Add paragraph to man page for install-mh and to INSTALL file
1281 about checking for global mh.profile.
1283 * Renamed m_find() to context_find().
1284 Renamed m_replace() to context_replace().
1285 Renamed m_delete() to context_del().
1286 Renamed m_update() to context_save().
1287 Renamed m_getdefs() to context_read().
1288 Renamed m_foil() to context_foil().
1290 * Change rcvstore to use routine folder_addmsg(), instead of
1291 adding message to folder itself.
1293 * Changed refile, so that if the switch -preserve is used,
1294 and a conflict occurs for a particular folder, then folder_addmsg()
1295 will just use next highest available number for that folder,
1298 * Make folder_addmsg() more robust. It will make repeated
1299 attempts to link file into folder if link returns with
1302 * Fix bug, so that that if forking sendmail, HELO will be sent
1303 unless clientname: option is defined but empty (so now it
1304 is the same as the direct smtp code).
1306 * Changed sprintb to snprintb (now we pass the buffer length
1307 to new routine). Changed code to use new function.
1309 * Added snprintf to sbr. Added configure check to build it
1310 if you don't have a native version (but haven't changed much
1311 code to use it yet).
1313 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1315 * Released nmh-0.18-pre1.
1317 * Fixed alarm bug in slocal, so that alarm is never
1318 called with a value larger than 30 mintues.
1320 * Fixed race condition in rmm and refile, so that
1321 context is updated before external rmmproc is called.
1323 * Removed all the OVERHEAD code.
1325 * Move code to add message to folder from refile.c
1328 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1330 * Did some rearranging of the internals of inc.c.
1332 * Make -inplace the default for anno, forw, dist, and repl.
1334 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1336 * Created new directory mts/sendmail for direct sendmail
1337 interface (although it currently still uses SMTP).
1339 * Removed all the TMA (trusted mail agent) code
1341 * Removed all the TTYD (terminal access daemon) code
1343 * Removed all the MF (uucp filtering) code.
1345 * Removed all the code for BERK.
1347 * Removed all the code for stand-alone delivery (MHMTS).
1349 * Split the file mts/sendmail/smail.c into sendmail.c and
1350 smtp.c. Changed the name of the directory to mts/smtp.
1352 * Changed autoconf to use @sysconfdir@ for location of
1353 configuration files.
1355 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1357 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1359 * Released nmh-0.17.
1361 * MAKEDEFS weren't passed down to recursive makes correctly.
1363 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1364 of hard-coding "/etc/utmp".
1366 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1369 * Remove configure checks for ulong and ushort. Changed
1370 code to just use unsigned {short, long}.
1372 * Change addmsg function in refile.c to return new
1373 number of refiled message.
1375 * Added check in get_returnpath for empty unixbuf.
1377 * Cleanup of sbr/pidstatus to use more POSIX macros
1378 for return value of wait().
1380 * Change configure to also check /bin for "more".
1382 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1384 * Released nmh-0.16.
1386 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1388 * Added automimeproc, which should replace automhnproc.
1390 * multipart messages will no longer abort for messages
1391 of type 8bit or binary (although we still can't really
1392 deal with binary messages, yet).
1394 * Fix double free of c_storage. From John MacMillan.
1396 * mhn now treats unknown subtypes of "text" as text/plain.
1398 * mhn changed so that specifying mhn-show-multipart, or
1399 mhn-show-multipart/{mixed, alternate, etc...) will override
1400 the use of the internal method for displaying these types.
1401 Previously mhn would always use the internal method for subtypes
1402 mixed, alternate, digest, and parallel (even if an alternate
1403 method was specified in mhn.defaults).
1405 * mhn show treats unknown subtypes of multipart, as type
1406 multipart/mixed (as specified RFC2046).
1408 * mhn checks for the parameter "name" rather than "x-name".
1409 From MH-6.8.4 patch.
1411 * Fix double free of ctinfo in user_content when using
1412 #forw with single message. From John MacMillan (and
1415 * Changed -mhnproc switch for show, to -showmimeproc.
1417 * Changed profile entry "mhnproc" to "showmimeproc".
1419 * Added "mime" option to "whatnow", which calls the program
1420 "buildmimeproc" (default is mhn -build) to process MIME
1423 * Added -build switch to mhn, to process MIME composition
1426 * Did some reorganizing of mhn.c.
1428 * Changed casting in mts/sendmail/smail.c from (char) to
1429 (signed char) so SMTP reply codes work correctly for machines
1430 which used unsigned chars by default.
1432 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1434 * Released nmh-0.15.
1436 * Added new form "scan.unseen" to distribution. It marks messages
1437 which are in any sequence in Unseen-Sequence.
1439 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1441 * Fix sign extension bugs in fmt_scan.c.
1443 * Fix m_atoi.c so that strings ending in non-digit characters
1446 * Split code in burst.c so that finding delimiters of digested
1447 messages and bursting a message into multiple messages are
1448 two separate functions (find_delim and burst).
1450 * Add workaround fo AC_PATH_PROG in configure.in, so
1451 that BSD4.4 machines can find sendmail, vi, more.
1453 * Added "-width" option to rcvtty.
1455 * Change a few variable names in zotnet/mts/client.c since
1456 they conflict with defines on AIX.
1458 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1459 unsuccessful if resulting file is less than 500 lines long
1460 (rather than 10, which was previous value), since AIX
1461 sed gives mangled file of about 200 lines.
1463 * Extract code in rcvstore.c to link message into folder,
1464 and put in own subroutine.
1466 * Extract code in refile.c to link message into folder,
1467 and put in own subroutine.
1469 * Moved code to remove messages from folder into own
1470 routine "folder_delmsgs" in sbr. Changed rmm.c and
1471 refile.c to use new routine.
1473 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1475 * Renamed m_seqok to seq_nameok.
1477 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1480 * Changed m_seqflag to return the number of a sequence rather
1481 than its bit flag. Changed its name to seq_getnum and renamed
1482 file to sbr/seq_getnum.c.
1484 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1487 * Added zero switch to m_seqadd function to zero out bits before
1488 adding message to sequence.
1490 * Renamed function m_setvis to m_setunseen, and renamed
1491 corresponding file in sbr.
1493 * Renamed function m_setseq to m_setprev, and renamed corresponding
1496 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1498 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1499 all selected messages from a sequence.
1501 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1502 selected messages to a sequence.
1504 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1507 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1509 * Renamed function pack_folder to m_packfolder, and moved it
1510 from uip/folder.c into its own file sbr/m_packfolder.c
1512 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1514 * Changed function m_gmsg to m_readfolder. Renamed file
1515 sbr/m_gmsg.c to sbr/m_readfolder.c.
1517 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1519 * Expanded rcvtty man page, and added small patch from
1520 MH-6.8.4 distribution.
1522 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1524 * Released nmh-0.14.
1526 * Comment out configure test and code for tgetent to allocate its
1527 own termcap buffer when passed a NULL argument.
1529 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1531 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1532 to show. Restructured code to handle options to various
1533 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1534 environment variable.
1536 * Added new man page `mh-draft' which documents the
1537 draft folder facility in nmh.
1539 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1542 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1543 fmtcompile.c to fmt_compile.c, and formataddr.c to
1546 * `send -help' wasn't showing the -(no)mime and -split
1549 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1551 * Released nmh-0.13.
1553 * Changed mhpath so it doesn't abort if a message sequence
1554 such as "mhpath all" expands to more than 1000 messages.
1555 Also mhpath now dynamically reallocated space for message
1556 names (The number of command line arguments is still limited
1559 * Did some general restructuring of the code in folder.c
1560 that checks for folder information, and prints it.
1562 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1564 * Changed `folder' to reallocate space for folder names if
1565 necessary. So `folders' can now handle more than 300 folders.
1567 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1569 * Change configure to use a compile check to see if the tm struct
1570 has tm_gmtoff, rather than using egrep.
1572 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1574 * Released nmh-0.12.
1576 * Had set_exists and unset_exists macros backwards.
1578 * Released nmh-0.11.
1580 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1582 * Added documentation to mh-profile.man about the various
1583 `procs' (mhlproc, showproc, lproc, etc...).
1585 * Replace the bit twiddling for SELECTED, UNSEEN, and
1586 mp->attrstats with macros.
1588 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1591 * Change fstat to stat in m_gmsg.c since Linux wants
1594 * Merge Linux patch sent in by Michel Oosterhof (original
1595 patch from bsa@kf8nh.wariat.org).
1597 * Document an undocumented MH feature. mhn -form mhl.null
1598 will suppress the display of the message header.
1600 * mhparam will now return "mhparam etcdir".
1602 * Add catproc to /config/config.c and use that in show.c
1603 and mshcmds.c, rather than hard coding in /bin/cat.
1605 * Add mhnproc to the list of `procs' in mh-profile.man.
1607 * Add configure test for lorder and tsort commands.
1609 * Commented out the padding in the `msgs` struct in h/mh.h
1611 * Change m_gmsg.c to allocate elements to the `info' array by
1612 500 elements at a time (rather than MAXFOLDERS / 5).
1614 * Add note to man page for mhmail that zero length messages are
1615 not sent. Need to use -body "" to send empty messages.
1617 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1619 * sbr/getcpy.c : assign '\0' to character, not NULL.
1621 * add m_fmsg to most programs in uip so that they explicitly free
1622 folder/message structure when done with folder.
1624 * uip/slocal.c : cleanup processing of sender. Make sure it is
1625 defined even if message is missing "From " line.
1627 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1629 * Released nmh-0.10.
1631 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1633 * Add configure check for <locale.h>. Turn on LOCALE support
1636 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1638 * Reversed previous decision to retain "From " lines in slocal.
1639 The "From " line is now removed from all messages.
1641 * inc now saves the date from the "From " envelope in the
1642 Delivery-Date header for all messages.
1644 * sbr/m_getfld.c: Clean up processing of Return-Path and
1645 Delivery-Date from the "From " envelope.
1647 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1649 * client.c: cast iaddr to int before comparing return value
1650 of inet_addr with NOTOK.
1652 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1654 * Grep test for signal names was failing on some OS'es because
1655 of missing tabs in regex.
1657 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1659 * Released nmh-0.09.
1661 * Move config files and format files to *.old before installing.
1663 * Add configure check for killpg.
1665 * msh.c: include <termios.h> instead of <termio.h> and
1668 * prompter.c: don't include <sys/ioctl.h> anymore.
1670 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1672 * Added `-mime' and `-nomime' options to `repl'.
1675 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1677 * ruserpass.c : removed conflicting prototypes.
1679 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1680 by `mesg' command. Previously only worked on BSD machines.
1682 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1684 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1685 than hard coded "/etc/utmp".
1687 * Released nmh-0.08.
1689 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1690 when accessing ndbm/db file for duplicate suppression, instead of
1691 locking database itself.
1693 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1695 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1697 * Changed the slocal actions `file' and `>' to always deliver in
1698 mbox (uucp) format rather than be determined by RPATHS config
1701 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1702 rather than mmdf format.
1704 * slocal now adds Delivery-Date field to all messages (previously it
1705 only added it to messages when delivering them to a file). The
1706 "From " line is now retained on all messages if compiling with
1707 RPATHS, rather than being discarded.
1709 * rcvpack no longer adds the Delivery-Date field to messages.
1711 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1713 * Removed the script packmbox, since it's functionality has been
1716 * Changed packf so that it uses mbox (uucp) format by default
1717 rather than mmdf format. Added options -mbox and -mmdf to
1718 packf so you can choose the preferred format.
1720 * Changed rcvpack so that it uses mbox (uucp) format by default
1721 rather than mmdf format. Added options -mbox and -mmdf to
1722 rcvpack so you can choose the preferred format.
1724 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1726 * Changed nmh to use dot locking by default (although you
1727 can still easily change this in config.h).
1729 * Simplified locking code. Removed code allowing setting of
1730 locking type in mts.conf. Now the locking type and locking
1731 directory (if any) can only be set at compile time.
1733 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1735 * Prefer getting timezone information from tm->gmtoff rather
1736 than tzset and external timezone variable.
1738 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1740 * Fixed typo in ruserpass.c in the variable toktabs.
1742 * When ruserpass was added to LIBOBJS, it was missing
1745 * Released nmh-0.07.
1747 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1749 * Add check to configure, so that if ruserpass, or _ruserpass
1750 is not found, build version of ruserpass in sbr.
1752 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1753 the code that manipulates internals of stdio, will build
1756 * Added #define to control whether to compile the simple
1757 built-in FTP client in mhn.
1759 * Added configure check for ushort and ulong. Change code
1760 to use ushort/ulong rather than u_short/u_long.
1762 * A couple of small cleanups in locking code.
1764 * Added configure check for gmtoff element in struct tm.
1766 * Added configure check for tzset.
1768 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1770 * Released nmh-0.06.
1772 * Removed code for machines that don't have socket
1773 interface (how could they get mail anyway?).
1775 * Removed code for BSD41 machines. I don't think there are
1776 many such machines around anymore.
1778 * Add configure check for function uname, and prefer it
1779 over gethostname. General cleanup of zotnet/mts/mts.c.
1781 * Change all `lseek' calls to use POSIX symbolic constants
1782 SEEK_SET, SEEK_CUR, SEEK_END.
1784 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1786 * Check lex generated file in zotnet/tws and use
1787 pre-generated version if necessary.
1789 * Released nmh-0.05.
1791 * Change to use reliable signals on all platforms that have
1792 sigaction. Change so that interrupted system calls are
1793 restarted for all signals except SIGALRM. This fixes alarm
1794 handling code in smail.c for BSD based systems.
1796 * Added lorder and tsort commands so that created libs can
1797 be linked in one pass.
1799 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1801 * Changed pidwait so that while it is waiting for a child,
1802 it should block signals rather than ignore them.
1804 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1806 * Add checks to configure for dbm_open and -lndbm.
1808 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1810 * folder -pop and folder -push were freeing some memory too
1811 quickly, which caused the entry popped from the stack to not
1812 become the current folder.
1814 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1816 * Released nmh-0.04.
1818 * Define ospeed and PC in termsbr.c is OS doesn't have
1821 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1823 * editfile will create a symbolic link to the altmsg if it
1824 can't make a link, on any machine supporting lstat. Formerly
1825 this would happen only on BSD42 based machines.
1827 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1829 * traverse (in popsbr.c) wasn't calling va_start before using
1830 variable argument list. Fixes core dump in inc when using POP.
1832 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1834 * The variable pass in remotemail needed to be set to
1835 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1838 * inc and msgchk were using -rpop by default when configured
1839 with POP support. Default is now -norpop.
1841 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1843 * By default, post will now give the SMTP HELO command with
1844 the local hostname. If you specify a hostname with the
1845 clientname: option in mts.conf file, post will give the
1846 HELO command with that name instead. If the argument to the
1847 clientname: option is empty, no HELO command is given.
1848 (From the MH-6.8.4 diff)
1850 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1852 * When using `-help' for a command, it will also print its
1853 profile compents from .mh_profile. (From MH-6.8.4 diff)
1855 * "slocal -file" will now correctly takes its input from
1856 a file (currently need to specify full path).
1858 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1860 * "slocal -debug" will now issue a warning if a non-blank
1861 line in the .maildelivery file has less than 5 fields.
1863 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1865 * Changed slocal so that code for duplicate suppression
1866 (MH config was MSGID) is always built. Added the options
1867 -[no]suppressdup to slocal to turn this on/off.
1869 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1871 * Released nmh-0.03.
1873 * Fixed problem where mark would core dump if no
1874 .mh_sequence file existed.
1876 * Fixed problem where slocal would core dump if -debug
1877 option was given, and certain headers were missing.
1879 * Added patch to slocal to add `folder' (+) action, which
1880 is shorthand for piping message to rcvstore. Updated
1883 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1885 * Changed flist option -unseen to -[no]all. Cleaned up
1888 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1890 * Fixed flist. Changed the profile component `Folder-Order'
1891 to `Flist-Order. Added option `-sequence' to flist, so
1892 you can specify the name of the sequence to search for.
1894 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1896 * A few minor portability cleanups. Changed to use PATH_MAX
1897 rather than MAXPATHLEN. Don't assume ospeed variable exists
1898 in termsbr.c. Removed some conflicting prototypes.
1900 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1902 * Add configure test to check if tgetent will accept NULL
1903 and allocate its own buffer. Borrowed from zsh.
1905 * Changed libpath to etcpath.
1907 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
1909 * Cleaned up source code and Makefiles, so that if your `make'
1910 supports the VPATH option, you can build nmh in a different
1911 directory from where the source code is located.
1913 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
1915 * Released nmh-0.02.
1917 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
1919 * Split mhook man page into man pages for rcvdist, rcvpack,
1922 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
1924 * Changed code to use strerror, rather than using sys_errlist
1925 and sys_nerr directly.
1927 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
1929 * -compat switch from install-mh removed.
1931 * Changed the default POP port from "pop" to "pop3".
1933 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
1935 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
1936 (again) to mhn.defaults.sh. Changed find_program (again) to
1937 mhn.find.sh. mhn.defaults.sh now takes the search path
1938 as an argument. Default search path is now specified in Makefile
1939 rather than in script.
1941 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
1943 * Changed mtstailor file to mts.conf. Updated man pages.
1945 * Changed si_value to si_val in mhn.c, since it conflicts with
1946 macro defined on Solaris.
1948 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
1950 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
1951 support for Emacs front-end mhe. It is on by default.
1953 * Added the following configure options: --enable-nmh-pop to
1954 enable client side pop support, --enable-nmh-smtp to enable
1955 SMTP support. Client-side pop support now compiles. Man
1956 pages for inc, msgchk, mh-chart now correctly added pop
1959 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
1961 * Added configure test for bug in C libraries where linker
1962 can't find ruserpass, but can find _ruserpass.
1964 * Fixed configure test so that termcap variable ospeed is
1967 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
1969 * Source files converted to ANSI C.
1971 * md5 now compiled separately rather than being included
1972 in mhn.c. Changed md5 to use memset and memcpy.
1974 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
1976 * Collected the error routines adios, advise, admonish, and advertise
1977 into one file (error.c), and did some rearranging of the code.
1979 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
1981 * Added awk script sigmsg.awk (originally written by
1982 Geoff Wing <mason@werple.apana.org.au> for zsh) to
1983 automatically generate signal messages for pidstatus.c.
1984 Added files sbr/signals.c, h/signals.h. Code now uses
1985 sigprocmask to block signals (if available). Code now uses
1986 signal blocking on non-BSD machines.
1988 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
1990 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
1992 * Released nmh-0.01.
1994 * Added configure code to check for type of signals functions
1995 you have (POSIX or BSD style signals). Added function
1996 SIGPROCMASK to simulate sigprocmask on machines that don't
1999 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2001 * Added -version switch to all commands. Also added to
2004 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2006 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2007 POSIX termios.h style functions if present.
2009 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2011 * Changed support/general/bootmhn.sh to output new mhn_defaults
2012 file to standard output by default (makes it easier for testing).
2013 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2014 script to find_program.
2016 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2018 * Added patch to uip/folder.c from exmh distribution to
2019 speed up -recurse option.
2021 * Added flist command from exmh distribution. It doesn't work
2022 yet, but it compiles :-)
2024 * Changed default location for install to
2025 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2026 and configuration files go in nmh/etc, and support binaries go
2027 in nmh/lib. Of course, all this can now be changed in the top
2030 * Started with mh-6.8.3 as based and converted to autoconf.
2031 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2032 Pop support and plenty of other things, are now broken.