1 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * Upped the version number to 1.0.3+dev (ideally this should be
4 done by whoever makes a release tar file, immediately after doing
7 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
8 patch, posted to comp.mail.mh, which he says prevents loss of mail
9 when inc'ing into a full filesystem.
11 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
12 so that stamp-h.in will be different each time configure.in and
13 related files are changed, making it easier to check it in (which
14 is necessary to prevent unnecessary autoconf calls).
16 * My declaration of initgroups() in slocal.c to eliminate the "no
17 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
18 use AC_EGREP_HEADER to see where initgroups() is declared, if
21 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
23 * Fix security hole in mhshowsbr.c which allowed untrusted shell
28 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
30 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
31 be surrounded by single quotes, as a shell is not spawned when
32 just saving files, and the filenames will end up with literal
33 quotes embedded in them.
35 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
37 * Whoever originally added the -help switch to all the commands
38 got too cute and had the option itself print out as "-(help)" in
39 the -help output. I guess the idea was to make reference to the
40 fact that clearly you know about the -help option since you're
41 currently looking at its output. I think it's a bad idea to
42 overload the meaning of the parentheses, however -- they're
43 supposed to indicate what abbreviated prefix of the switch you're
44 allowed to specify. It doesn't make sense to show that you're
45 allowed to "abbreviate" the switch to its entire length.
47 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
49 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
51 The following patch fixes a problem with requesting a
52 service key for a machine that has multiple 'A' records. It
53 also makes "-kpop" a command line option, for users who
54 would like to use both "kpop" and "pop".
56 Did no testing of the new features, as I don't have access to a
59 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
61 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
63 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
65 * All %-escapes in mhn.defaults that actually expand to something
66 should be surrounded by single quotes. Added quotes to the ones
67 in mhn.defaults.sh that were missing them.
69 * Added check for lynx to write mhshow-show-text/html line in
72 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
74 * makedir() had multiple bugs dating back to MH. It passed an
75 octal constant to atoi(), which interpreted it as decimal,
76 resulting in directories with no user read or execute permissions,
77 making nested directory creation fail. Also, when creating a
78 nested directory, correct permissions were only set on the inner one.
80 * A second `make install' would always fail because the check for
81 whether mh_profile.5 existed was written incorrectly.
83 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
85 * Added documentation on both types of masquerading to post's man
88 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
90 * Doug's portability fix of my setgid inc autodetection had a
91 caching bug -- if you re-ran configure, uip/Makefile would be
92 corrupted, and installation would bomb out on OSes where inc needs
95 * Implemented a new kind of email address masquerading. Usually,
96 when a user writes a custom "From:" header in a draft, nmh uses it
97 rather than generating one. However, the user's true address is
98 used in the SMTP envelope "From:" and is revealed in the "Sender:"
99 header. Now, when mmailid is set to non-zero, the envelope
100 "From:" uses the address specified in the draft "From:" header,
101 and there is no "Sender:" header. This is useful when sending on
102 behalf of a remote POP3 account or when remote mail robots
103 incorrectly use the envelope "From:" in preference to the body
104 "From:". This processing has only been implemented for post, not
105 for the undocumented spost (which was already missing some "From:"
106 processing that post has).
108 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
110 * Got rid of the rest of the gcc -Wall warnings that I didn't have
111 time for on 1999-07-15 (and, it would seem, some new ones people
112 introduced since then). The primary ones were the warnings that
113 default prototypes were being used for [v]snprintf() and
114 str[n]casecmp(). As of right now, there are _no_ compilation
115 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
118 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
120 * Move mhtest from bindir to libdir.
122 * Move sendfiles from libdir to bindir.
124 * Updated sendfiles manpage to reflect this change.
126 * Added documentation for -build and -file switches to repl and
127 forw manpages (patch from Peter Maydell).
129 * Fixed interaction between specifying -cc in profile and -group on
132 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
134 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
135 not unanimous support for my proposed even/odd release/developer
136 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
139 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
141 * Upped the version number to 1.0.3. If we don't do this, then
142 when people report bugs against 1.0.2, we won't know "which" 1.0.2
143 they're talking about (since the development source is publically
144 available via CVS). I think the Linux kernel version numbers are
145 a good model, so the next time we roll a tarball, it should be
146 version 1.0.4 (or higher -- anyhow, an even-numbered version).
148 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
150 * Released nmh-1.0.2.
152 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
154 * Added check for whether "libtool" is in fact gnu libtool. If
155 it is, it is not used. This is the wrong behavior. If vendor
156 XYZ later on decides to create yet another libtool, we'll be
157 caught again. This works for now.
159 * Minor updates to MACHINES refering to Mac OS X.
161 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
163 * Added check for "libtool" (a ranlib type tool for Mac OS X)
164 and modified Makefiles so that nmh will build under Mac OS X.
166 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
168 * Changed repl defaults to partly revert to MH behaviour,
169 "-cc all" is now only implied with -group.
171 * The replcomps template includes cc: header again (as in MH).
173 * Updated repl man page to reflect these changes.
175 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
177 * Tweaked configure to handle Solaris and SunOS after the BIND
178 changes. Both need more cleanup.
180 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
182 * Removed BIND define and replaced it with a check for
183 gethostbyname (to determine if the host is DNS aware) and a
184 check for sethostent. This appears to be the right thing to
185 do, but there is no explanation of the reasoning behind the
186 BIND define in the code and it appears to have been used for
189 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
191 * Updated manpages Makefile to link mh-profile.5 to
192 mh_profile.5 after installation. Suggestion from Richard Cohen
193 <richard@jubjub.demon.co.uk>.
195 * Modified configure.in to check for _IO_write_ptr and libio.h
196 to determine whether to define LINUX_STDIO instead of using
199 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
201 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
202 multiple machines in the past where the mail spool was a symlink
203 to a directory on another device with more free space.
205 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
207 * Fixed a portability problem in Doug's fix of a portability
208 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
210 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
212 * Added config.sub and config.guess to the list of files to be
215 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
216 added if a list of addresses was split over several header lines.
218 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
219 macros, regardless of platform.
221 * Allow q to quit mhshow, and n to skip to next part. Patch from
222 Kimmo Suominen <kim@tac.nyc.ny.us>.
224 * Modified mhstore to recognize attachments created by sendfiles
225 with x-conversions=gzip.
227 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
229 * added explicit cast to long from time_t for tclock in
232 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
233 it's needed for ioctl() anyway. This prevents a warning about
234 implicit definition of ioctl().
236 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
237 "User Configuration" section of config.h (moved @TOP@ in
238 acconfig.h) so they're easier to find, should someone actually
239 want to mess with them.
241 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
243 * updated Makefile.in so it recognized COMPLETION-TCSH and
244 COMPLETION-ZSH (only used in make nmhdist).
246 * added prototype for ruserpas to <h/prototypes.h>. Fixes
247 warnings in mhparse.c and mhbuildsbr.c.
249 * added include checks for <time.h> and <sys/time.h> to
250 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
251 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
253 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
254 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
255 warnings about implicit definition of mts_init().
257 * added <grps.h> to slocal.c to prevent warnings about
260 * added <h/signals.h> to prevent warning about missing SIGNAL
263 * added function prototypes to smtp.c, whatnowproc.c,
264 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
267 * explicitly declared mbx_style in mshcmds.c and lused in
268 fmtdump.c as type static int instead of just static to
271 * various code cleanups to prevent ambiguous statements
272 (brackets for if/thens and parens for complicated if
276 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
278 * commented out _cleanup() in mf.c because it's the only
279 location in all of the source code where it exists. It was
280 preventing compilation on at least linux.
282 * Added check for <db1/ndbm.h> which is the new location where
283 linux systems appear to be stuffing this header file.
285 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
287 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
289 * added mh_profile SEGV patch from Richard Cohen
290 <richard@jubjub.demon.co.uk> that prevents crashing when
291 mh_profile doesn't end in a newline. A similar patch was
292 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
294 * fixed bug in associated with MAILGROUP #define (group "mail"
295 is not universal) -- hard to believe, but true.
297 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
299 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
301 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
303 * Automated #define of MAILGROUP and installation of inc as setgid mail
304 when the mail spool directory isn't world-writable.
306 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
308 * slocal -debug used to leave a file in /tmp for each message
309 processed. Very bad for folks with slocal -debug in their .forward!
311 * Got rid of a ton of compilation warnings. Most were "junk"
312 warnings due to the use of gcc -Wall (without -Wno-parentheses),
313 but a few represented real bugs. There remain many warnings to be
314 tackled that are due to missing function prototypes (e.g. snprintf()).
316 * Default rcvdistcomps no longer puts a copy of all outgoing
317 messages in outbox. Added an rcvdistcomps.outbox that does.
319 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
321 * Updated configure to check for mkstemp (available on OpenBSD) and
322 substitute it for mktemp if available.
324 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
326 * Added config.sub and config.guess and updated acconfig.h and
327 configure.in to automatically detect system type and set the
330 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
332 * Released nmh-1.0.1.
334 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
336 * Fixed flist to properly deal with relative folder names.
337 Problem noted by Jerry Peek <jpeek@jpeek.com>.
339 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
340 well as the Kerberos 5 compat libraries. Based on a patch from
341 Assar Westerlund <assar@sics.se>.
343 * Added a check in configure.in to test if modf is in libc and
344 link with libm if not. This is needed by at least Digital UNIX.
345 Problem pointed out by Kevin Oberman <oberman@es.net>.
347 * Fix a bug from the "mhn -show" to "mhshow" renaming that
348 made the "list" command in whatnow not work for some users.
349 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
351 * Replaced "extern int errno" with "#include <errno.h>" in a
352 number of files. Suggested by Stephen Wilson Bailey
355 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
356 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
358 * Fixed a segmentation fault in inc. Patch originally from Ruud de
359 Rooij <r.c.m.derooij@twi.tudelft.nl>.
361 * Allow display of 8bit encoded messages. From Kimmo Suominen
364 * Fixed repl to not add line breaks in the middle of long
365 addresses when building a reply. From Ruud de Rooij
366 <r.c.m.derooij@twi.tudelft.nl>.
368 * Added -library switch to spost so it can parse user aliases like
369 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
371 * Changed configure.in's check for sigsetjmp to properly deal
372 with systems like Linux where it is a macro. From
373 <elleron@servtech.com>.
375 * Fixed a bug in whatnow that could cause it to sometimes exit
376 without prompting the user. Based on a patch by Richard Geiger
379 * Added code to deal with SIGPIPE in mhl so it doesn't print
380 "Broken pipe" if you quit out of the moreproc.
382 * Documentation: Added a note to MACHINES about Irix make. Added a
383 pointer to the online copy of the MH book in INSTALL. Added
384 some additional information to the whatnow and packf man pages,
385 suggested by Jerry Peek <jpeek@jpeek.com>.
387 * Updated INSTALL, FAQ, etc to not refer to Richard as the
388 maintainer or math.gatech.edu as the home any more.
390 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
394 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
395 mbx_open so that the mode of zero length maildrops
396 would not be changed.
398 * Replaced the substitute version of snprintf() with the
399 one from the Apache web server.
401 * Changed to default mode for creating new messages to 0600
402 (this should have been done a long time ago).
404 * Changed "flist" to handle searching for multiple sequences
405 for each folder. Also flist will now correctly split
406 Unseen-Sequence if it consists of multiple sequences.
408 * Added new switches `-unlink' and `-nounlink' to "refile".
410 * Added new switches `-unlink' and `-nounlink' to "rmm".
412 * More cleanups of slocal output. Changed adorn() to
413 send to stdout, instead of stderr (to match rest of
416 * Merged mbx_create() into mbx_open, so that creating and
417 opening a nonexistent maildrop is done atomically. This
418 removes a bad race condition.
420 * Fixed bug that caused slocal to be unable to save to MMDF
423 * Added new wrapper function usr_folder() to slocal.c to
424 handle adding message to folder (currently, it still uses
425 usr_pipe() to call rcvstore).
427 * seq_list() checks for empty folder before scanning for
428 sequence information.
430 * num_digits() in flist.c and folder.c now returns correct
431 value for 0. Also added sanity check.
433 * folder_delmsgs() now correctly decrements internal message
436 * Don't attempt to read sequence information if folder
439 * Split seq_read into seq_public and seq_private.
441 * Small change to sigmsg.awk, since newer versions of gawk
442 interpret 034 as octal.
444 * In flist, don't scan for sequence information in empty folder.
446 * Updated mhn.defaults.sh to output profile entries for mhshow,
447 mhstore, and mhbuild.
449 * Changed configuration parameter "mhn-access-ftp" to
450 "nmh-access-ftp". Updated man pages
452 * Moved the code in InitMultipart to reverse the order of the
453 parts in a multipart, into its own function "reverse_parts()".
455 * Changed code in mhbuildsbr.c to store unencoded content
456 in the c_cefile structure when building.
458 * Changed code in mhoutsbr.c to look for unencoded content
459 in the c_cefile structure when outputing message.
461 * Changed configuration parameter "mhn-cache" and
462 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
463 since it is used in mhstore, mhlist, and mhshow. Updated man pages
465 * Change configuration parameter "mhn-storage" to
466 "nmh-storage", since it is now used in mhstore, mhlist,
467 and mhshow. Updated man pages
469 * Add autoconf support for KPOP (kerberized pop).
471 * Add autoconf support for Hesiod.
473 * Split routines to output a message given a Content structure
474 (output_message, output_content, write7Bit, etc..) to a new
477 * Split output_content(), into output_content() and build_headers().
479 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
480 list of header fields, rather than reopening the message.
482 * Added free_header() to mhfree.c to free structures containing
483 header field information.
485 * Changed get_content() to use the linked list of header fields
486 when parsing the various MIME headers (Content-XXX).
488 * Changed get_content() to store linked list of header field
489 values when parsing a content.
491 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
492 routines in mhcachesbr.c to handle the content cache.
494 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
495 cache_content) into new file mhcachesbr.c.
497 * More calls to sprintf/strcpy (primarily in mhparse.c
498 and mhbuildsbr.c) converted to snprintf/strncpy.
500 * When a message is displayed with `mhshow', it is now
501 removed from the "unseen" sequence.
503 * Change the default "showmimeproc" to "mhshow".
505 * Split "mhn -show" off into separate command "mhshow".
507 * Split "mhn -store" off into separate command "mhstore".
509 * Split "mhn -list" off into separate command "mhlist".
511 * Add sanity checks to context_find(), context_replace(),
512 and context_del(), to abort if context file hasn't been
515 * Add calls to context_read(), to the beginning of all nmh
516 commands (instead of being called indirectly by context_find).
518 * Changes the "substitute" version of vsnprintf/snprintf for
519 operating systems without native versions, to just call the
520 native vsprintf(), and ignore the buffer length. This is
521 faster, but less secure than the previous version that used
522 temporary files. This should only be a problem for systems
523 which do not have a native snprintf(), and require `inc' to
526 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
528 * Changes client() routine to take additional parameter, which is
529 the buffer length of the parameter "response". Then added
530 buffer length checks for this parameter.
532 * Changed getws() to get_fields(), since that is apparently the
533 name of a wide character version of gets() on some archetitures.
535 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
537 * Change the code in most of the commands that take multiple
538 message names/sequences/ranges on the command, such that
539 the msgs array is expanded dynamically. This removes most
540 of the limits on the length of command lines.
542 * Add additional parameter to copyip(), to specify the
543 maximum number of strings that can be copied (security
546 * Create new function getarguments(), to massage the argument
547 vector before parsing it (add any arguments from your
548 profile to the beginning of the argument vector). This
549 also removed the general limit on the number of command line
552 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
556 * Added a new command "delete", that is available during
557 a "whatnow" session. It is equivalent to "quit -delete".
559 * Added another parameter to editfile (in whatnowsbr.c),
560 that controls whether editfile should remember the last
561 program that was exec'ed. This way the whatnow command
562 "mime", will not be re-executed if "edit" is later given
565 * Changed whatnowsbr.c, so that whatnow doesn't abort if
566 mhbuild returns an error.
568 * Added parameter to sendsbr(), so you may specify whether to
569 rename the draft file.
571 * Pass delay time to splitmsg() as a parameter, rather than
572 use a global variable.
574 * Moved code to rename draft file after sending message from
575 splitmsg and sendaux, to sendsbr.
577 * Removed all the code in viamail to split messages and then
578 mail them. Replaced this with the standard sendsbr.c routines.
580 * Changed sendsbr(), so that when splitting messages into
581 messages of type "message/partial", the header fields that
582 are copied are more compliant with RFC-2046.
584 * Fixed mhbuild to track temporary files better. They are
585 now correctly removed when mhbuild aborts.
587 * Created a new man page for "sendfiles". The information
588 about "mhn -viamail" in the "mhn" man page was moved to
591 * Changed the name of the "viamail" shell script to
592 "sendfiles". Modified "sendfiles" to use the new
595 * Moved the functionality for "mhn -viamail" out of mhn,
596 and into a separate executable called "viamail".
598 * When storing MIME contents to a folder using mhn -store,
599 they are now accumulated in a temporary file, and then added
600 to the folder using folder_addmsg().
602 * Moved code to save content to a folder from store_content
603 to new function output_content_folder.
605 * Moved code to save content to file from store_content to
606 new function output_content_file.
608 * Moved code to parse storage format string from store_content
609 to new function parse_format_string.
611 * Fix copy_some_headers() in mhstoresbr.c, so that the
612 correct header fields in the first enclosing message/partial
613 will be copied (according to RFC2046), when using mhn -store
614 to reassemble messages of type message/partial.
616 * Fixed bug to openFTP() in mhparse.c, that caused the
617 tmp file to not be removed, when transferring a
618 message/external file from ftp.
620 * Moved the code in mhparse.c to process -auto switch (scan
621 contents for the attribute "name"), to a new function
622 "get_storeproc" in mhstoresbr.c.
624 * Moved routines to free data structures related to MIME
625 content from mhparse.c and mhbuildsbr.c, to new file
628 * Moved code to show/display MIME content into new
631 * Moved code to store MIME content from into
632 new file mhstoresbr.c
634 * Moved code to parse MIME content into new
637 * Moved code to list information about MIME content
638 into new file mhlistsbr.c.
640 * Move part_ok(), type_ok(), content_error(), flush_errors(),
641 and set_endian() to new file mhmisc.c.
643 * Start to isolate the code to show, list, and store MIME
644 messages. One side effect is that only one flag (-show,
645 -list, or -store) can be used at a time now.
647 * mhn -store -auto wasn't storing file in correct directory.
649 * Removed a few dead variables from sbr/ruserpass.c
651 * move code for creating tmp files, and renaming the
652 the composition draft in mhbuild, from build_mime()
655 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
656 the -[no]auto switch (which isn't used in mhbuild).
658 * split mhn.c into mhn.c and mhnsbr.c (name later changed
661 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
663 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
667 * Added (unlisted) options [no]dashstuffing to send, post,
668 and whatnow to determine whether to do RFC934 quoting
669 (dashstuffing) for encapsulated BCC messages. The default
670 is still the same (dashstuffing).
672 * Changed the undocumented feature "nodashmunging" in forw
673 and mhl, into the documented feature "nodashstuffing". The
674 default for forw, is still "dashstuffing" for backward
675 compatibility, although I don't believe that bursting
676 RFC934 digests is very common anymore.
678 * Added an option to define REALLYDUMB in the default config.h.
679 But it is not on by default.
681 * moved creation of config file mts.conf from zotnet/mts
682 to etc. This simplified the Makefile in zotnet/mts.
684 * simplified directory support/general to etc.
686 * removed unneeded directory support/bboards.
688 * split getusername() into getusername() and getuserinfo().
690 * Changed getusr() routine to getusername().
692 * Slight cleanup in folder_pack.c on code that records the new
693 number of the "cur" message when packing.
695 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
699 * Change install process, so that hard linking the correct mts
700 library to libmts.a, is not necessary. The final link process
701 uses the original name of the library.
703 * Fixed bug in flist.c and folder.c, so that symbolic links which
704 point to directories, will not decrement the number of directory
707 * Split the function list_content (in mhn.c and mhbuild.c) into
708 list_content and list_debug.
710 * Don't pack (folder -pack) an empty folder.
712 * Exit gracefully in flist.c, if no sequence is specified,
713 and no "Unseen-Sequence" is given in nmh profile.
715 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
719 * Small clarification to the man page for `ali'.
721 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
722 are given, that order doesn't matter.
724 * Fix bug in seq_list.c when realloc'ing for
727 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
731 * Add new section on "Transfer Encodings" to man page for mhbuild.
733 * In mhbuild.c, split compose_content into compose_content
734 (parse and execute composition string), and scan_content (scan
735 content, decided transfer encoding, check for clash with boundary
736 string). I did a good amount of rearranging of this code.
738 * Moved definitions for data structures for parsing MIME
739 messages from mhn.c and mhbuild.c to a new include
742 * Small amount of rearranging in sendsbr.c
744 * Small changes to MAIL.FILTERING file.
746 * Add the file MAIL.FILTERING to nmh distribution.
748 * Add line to packf so that if message begins with
749 "X-Envelope-From:" field, it is converted to "From ".
751 * Fix packf to add "From " line to beginning of message,
752 even if Return-Path doesn't exist.
754 * Add note to MACHINES file that on Linux, configure
755 doesn't find the functions sigsetjmp/siglongjmp.
757 * Fix configuration for machines that don't have (or find)
758 sigsetjmp/siglongjmp.
760 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
764 * Add a configure check for sigsetjmp. Add some conditional
765 #define's in h/signals.h in case it's not found.
767 * Added additional notes about -auto switch in mhn man page.
769 * Added note about MM_CHARSET environment variable to
770 mh-profile(5) man page.
772 * Fix signal problem in mhn.c (change setjmp/longjmp to
773 sigsetjmp/siglongjmp).
775 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
777 * Released nmh-0.22-pre1.
779 * Changed the first line in mhl.format from
780 " -- using template mhl.format -- " to a blank line.
782 * Added note about automimeproc to mh-profile man page.
784 * Reorganize the main entry point for parsing a MIME message
785 or file in mhn. Add new function parse_file() as new main
786 entry point for parsing MIME files.
788 * Add note to mhn man page, that "mhn -file -" will accept the
789 source message on the standard input.
791 * Changed a sanity check in folder_realloc that was too strict.
793 * -norfc934mode is now the default for mhbuild,
794 rather than -rfc934mode.
796 * Fix mhbuild, so that Content-Description and RFC-822 comments
797 from #forw directive will be correctly included if there is
800 * Change mhn to correctly default parts of multipart/digest to
801 message/rfc822 (leftover code from rfc934mode was removed).
803 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
806 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
810 * If the file given to mhbuild is "-", then accept the draft on
811 standard input, and output the MIME message to standard output.
813 * Cleaned up code in mhbuild.c that decides what transfer
816 * Cleaned up code in mhbuild.c that decides what character set
817 to use for text contents.
819 * Removed old hpux specific code from zotnet/tws/lexstring.c
821 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
823 * Released nmh-0.21-pre2.
825 * Added the "decode" variable to mhl.format and mhl.header.
827 * Added new variable "decode" to mhlsbr.c to decode text in
828 header fields as per RFC-2047.
830 * Make sure that when decoding RFC-2047 header fields, that any
831 spaces at the ends of the encoded text are not ignored, but the
832 spaces between encoded word are.
834 * Removed #ifdef's for MIME. MIME support is always compiled in.
836 * scan/inc will now decode both Subject and From lines as
837 RFC-2047 encoded header fields.
839 * Added new function write_charset_8bit() to sbr. It returns
840 the character set to use for 8bit text in composition draft.
841 Changed mhbuild to use this function.
843 * Split mhn man page into man pages for mhn and mhbuild.
845 * mhn -show will only now only use default method for content
846 of type plain, if it is NOT a part of a multipart/alternative.
848 * Split mhn -build into mhbuild. Did some code cleanup.
850 * Added support for %(decode) to fmtdump.c.
852 * check_charset() now accepts US-ASCII as a subset of any
853 ISO-8859-X character set.
855 * Changed the default "showproc" to mhl, instead of the
858 * When reading file into mhn composition file, only need read
859 permissions, not write permissions.
861 * Added own version of strcasecmp to distribution, since
862 nmh calls it frequently with NULL pointers (ughh).
864 * Replaced uleq.c with strcasecmp. Removed uleq.c from
867 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
869 * Released nmh-0.21-pre1.
871 * If a message is missing charset parameter to text/plain, show
872 will assume US-ASCII, rather than just calling showmimeproc.
874 * Change show.c and mshcmds.c to use check_charset to see if text
875 message contains valid character set.
877 * Added new scan format file "scan.nomime" to support/general
878 that doesn't do any RFC-2047 decoding.
880 * Modified all the scan format files in support/general to do
881 RFC-2047 decoding of Subject field.
883 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
884 ignore whitespace between two valid encoded words, but not
885 between an encoded word and normal text.
887 * Created new file sbr/check_charset.c. Moved code from
888 fmt_rfc2047.c to check for valid character set to this file.
890 * Added format escape %(decode) to decode contents of "str" register
891 as a RFC-2047 header field.
893 * The command install-mh now recognizes the switches -version
896 * Added a new argument to print_help.c to decide whether to
897 print profile entries (needed for install-mh to prevent weird
900 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
901 is initialize to max (mp->lowmsg, 1) rather than always 1.
903 * Changed macros for sequence/attribute manipulation so that
904 message status array doesn't need to always start at 1.
906 * Small cleanups in folder_realloc().
908 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
912 * Added configure option --with-pager=PAGER.
914 * Added configure option --with-editor=EDITOR.
916 * Changed the default format file for mhl (mhl.format) to
917 also ignore (not display) the header fields Content-Type,
918 Content-Transfer-Encoding, and Content-ID
920 * Fixed core dump in addrsbr.c when using %(proper) format function
921 and the To: line was missing.
923 * Added the file ZSH.COMPLETION to the distribution.
925 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
927 * Released nmh-0.20-pre2.
929 * Added new switch -snoop to both `msgchk' and `inc', so you can
930 watch the POP transaction.
932 * Changed "replgroupcomps" to check for Mail-Followup-To header
933 first, and use it if available.
935 * Changed "replcomps" to check for Mail-Reply-To header
936 first, and use it if available.
938 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
940 * Released nmh-0.20-pre1.
942 * Changed seq_list.c to dynamically enlarge the buffer for
943 collecting the message ranges in a long sequence line.
944 This should remove the last hard limit on the size of a
947 * Changed seq_read.c so that can read long sequence lines.
948 It will use multiple calls to m_getfld() when m_getfld()
949 returns the state FLDPLUS.
951 * Changed brkstring.c to dynamically add more space for pointers
952 if necessary. This is needed when splitting up large sequence
955 * Did some small cleanups in seq_save.c.
957 * Added new switches `-[no]unseen' to rcvstore, to control
958 whether new messages are added to Unseen-Sequence.
960 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
962 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
963 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
965 * Changed "replcomps" to not include CC and TO lines so that
966 that reply message is only directed at the author of the
967 message to which you are replying.
969 * Added new switch `-group' to command repl, which causes repl
970 to use new forms file "replgroupcomps". This is intended for
971 making group replies.
973 * Removed #ifdef for ATHENA.
975 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
979 * Fix repl,forw so that switch `-form file' will not abort
980 as ambiguious (silly mistake on my part).
982 * Cleaned up the mhn man page. Added info about a few escapes
983 for the formatting/display strings that were not documented
984 (%%, %t). Moved the BNF grammar for the mime composition file,
985 to the end of the man page.
987 * Added the options -[no]format to the command repl. The
988 switch `-format' will filter the message to which you are
989 replying with the standard message filter "mhl.reply", which
990 is now included in the distribution. The `-noformat' option
991 will negate the use of -format or -filter and not include
992 the message to which you are replying in the draft.
994 * Did some cleaning and reorganization on many of the man
997 * Added debugging switch `-debug' to mhparam, which displays
998 the values of all `procs' (and some other misc configuration
999 info) that nmh keeps in global variables.
1001 * When using `refile -preserve', if a conflict occurs, then use
1002 the next available number above the message number you wish
1005 * In forw.c, split the code for creating MIME style forwarding
1006 out of copy_draft, and into copy_mime_draft.
1008 * Move routines in mark.c to print sequences, into new
1009 file sbr/seq_print.c
1011 * flist will now update the current folder.
1013 * Added the switches -[no]fast to flist, to replace
1014 -[no]total. The previous switches are still accepted
1015 but now undocumented.
1017 * More reorganization in flist of the code for
1020 * The command "flist +foo -all" will now scan the folder
1021 "foo" and all its 1st level children.
1023 * Add missing include file <h/mh.h> to sbr/snprintf.c
1025 * Fix alarm bug in rcvtty, so that when it calls external
1026 process, the alarm is never longer than 30 minutes.
1028 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1030 * Released nmh-0.18.
1032 * Fixed bug in mark, so that "mark -list -seq foo" will
1033 correctly indicate if "foo" is a private sequence. I found
1034 this bug mentioned in Jerry Peek's book.
1036 * Simplified the code in seq_setcur(), since seq_addmsg() now
1037 retains the public/private status of sequences.
1039 * Changed sequence handling so that if the switches -public
1040 or -nopublic, are not specified for the commands mark, pick,
1041 or rcvstore, then existing sequences will retain their
1042 previous public/private status.
1044 * mhparam now handles the mh-sequences profile entry
1047 * flist -all will now also check readonly folders (for
1050 * Improve the leaf optimization for folder command.
1051 It will now track the number of directories in a folder,
1052 and stop stat'ing files once it has hit all the subfolders.
1054 * Renamed m_getfolder to getfolder. Changed getfolder to
1055 take option to determine whether it should get current
1056 folder, or just default folder (Inbox). Changed rcvstore,
1057 inc, and rmf to use the new getfolder.
1059 * flist now indicates if a sequence is private.
1061 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1062 wait for stopped processes.
1064 * conflict will dynamically allocate space for group names,
1065 so it can now handle system with more than 100 groups.
1067 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1069 * Released nmh-0.18-pre4.
1071 * Check if we have enough message status space, before we
1072 call folder_realloc() in burst, mhpath, and m_draft().
1074 * mhn will now correctly identify a formatting string of "-"
1075 for the option -store, and send content to stdout.
1077 * Change the way that memory for message status is
1078 allocated. It is dynamcially allocated separately from
1079 the folder/message structure. This required changing
1080 folder_read.c, folder_realloc.c, folder_free.c.
1082 * Removed all the MTR code (experimental code for message
1085 * Renamed m_readfolder.c to folder_read.c and simplified
1088 * Renamed m_freefolder.c to folder_free.c.
1090 * Add function trim() to slocal.c to pretty print
1091 the debugging output.
1093 * Changed the name of m_packfolder() to folder_pack().
1094 Changed the name of m_remsg() to folder_realloc().
1096 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1098 * Released nmh-0.18-pre3.
1100 * Changed installation to add `flists' which is hard linked
1101 to `flist'. This is a equivalent to `flist -all'.
1103 * For flist, -showzero is on by default.
1105 * Major changes to flist. Default is now for flist to search
1106 current folder. The switch `-all' is now used to specify
1107 searching all top level folders. The new switch `-showzero'
1108 is used to print out folders that don't contain any messages
1109 in the given sequence.
1111 * Split BuildFolderList in flist.c into 2 functions
1112 (BuildFolderList, BuildFolderListR). Changed these functions
1113 so that flist now does better leaf optimization, and will stop
1114 stat'ing directory entries when it knows it has hit all the
1115 subdirectories of a given directory.
1117 * Reorganized code in folder.c, so that all relevant folders
1118 are scanned first and information recorded. Then all the
1119 folder summaries at printed out at one time.
1121 * Made the options of folder(s) more orthogonal. Now
1122 "folder -all -noheader -nototal" will do the right thing.
1124 * Added `-noall' switch to folder, for completeness.
1126 * Changed the default mode for creation of new folders
1129 * Slightly changed the format for flist. It now indicates
1130 if a folder is current. Also the width of the various
1131 fields are now calculated at runtime.
1133 * Changed the format for folder(s). Folder names
1134 are now left justified. The width of the various fields
1135 are calculated at runtime.
1137 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1139 * Released nmh-0.18-pre2.
1141 * Add paragraph to man page for install-mh and to INSTALL file
1142 about checking for global mh.profile.
1144 * Renamed m_find() to context_find().
1145 Renamed m_replace() to context_replace().
1146 Renamed m_delete() to context_del().
1147 Renamed m_update() to context_save().
1148 Renamed m_getdefs() to context_read().
1149 Renamed m_foil() to context_foil().
1151 * Change rcvstore to use routine folder_addmsg(), instead of
1152 adding message to folder itself.
1154 * Changed refile, so that if the switch -preserve is used,
1155 and a conflict occurs for a particular folder, then folder_addmsg()
1156 will just use next highest available number for that folder,
1159 * Make folder_addmsg() more robust. It will make repeated
1160 attempts to link file into folder if link returns with
1163 * Fix bug, so that that if forking sendmail, HELO will be sent
1164 unless clientname: option is defined but empty (so now it
1165 is the same as the direct smtp code).
1167 * Changed sprintb to snprintb (now we pass the buffer length
1168 to new routine). Changed code to use new function.
1170 * Added snprintf to sbr. Added configure check to build it
1171 if you don't have a native version (but haven't changed much
1172 code to use it yet).
1174 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1176 * Released nmh-0.18-pre1.
1178 * Fixed alarm bug in slocal, so that alarm is never
1179 called with a value larger than 30 mintues.
1181 * Fixed race condition in rmm and refile, so that
1182 context is updated before external rmmproc is called.
1184 * Removed all the OVERHEAD code.
1186 * Move code to add message to folder from refile.c
1189 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1191 * Did some rearranging of the internals of inc.c.
1193 * Make -inplace the default for anno, forw, dist, and repl.
1195 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1197 * Created new directory mts/sendmail for direct sendmail
1198 interface (although it currently still uses SMTP).
1200 * Removed all the TMA (trusted mail agent) code
1202 * Removed all the TTYD (terminal access daemon) code
1204 * Removed all the MF (uucp filtering) code.
1206 * Removed all the code for BERK.
1208 * Removed all the code for stand-alone delivery (MHMTS).
1210 * Split the file mts/sendmail/smail.c into sendmail.c and
1211 smtp.c. Changed the name of the directory to mts/smtp.
1213 * Changed autoconf to use @sysconfdir@ for location of
1214 configuration files.
1216 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1218 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1220 * Released nmh-0.17.
1222 * MAKEDEFS weren't passed down to recursive makes correctly.
1224 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1225 of hard-coding "/etc/utmp".
1227 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1230 * Remove configure checks for ulong and ushort. Changed
1231 code to just use unsigned {short, long}.
1233 * Change addmsg function in refile.c to return new
1234 number of refiled message.
1236 * Added check in get_returnpath for empty unixbuf.
1238 * Cleanup of sbr/pidstatus to use more POSIX macros
1239 for return value of wait().
1241 * Change configure to also check /bin for "more".
1243 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1245 * Released nmh-0.16.
1247 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1249 * Added automimeproc, which should replace automhnproc.
1251 * multipart messages will no longer abort for messages
1252 of type 8bit or binary (although we still can't really
1253 deal with binary messages, yet).
1255 * Fix double free of c_storage. From John MacMillan.
1257 * mhn now treats unknown subtypes of "text" as text/plain.
1259 * mhn changed so that specifying mhn-show-multipart, or
1260 mhn-show-multipart/{mixed, alternate, etc...) will override
1261 the use of the internal method for displaying these types.
1262 Previously mhn would always use the internal method for subtypes
1263 mixed, alternate, digest, and parallel (even if an alternate
1264 method was specified in mhn.defaults).
1266 * mhn show treats unknown subtypes of multipart, as type
1267 multipart/mixed (as specified RFC2046).
1269 * mhn checks for the parameter "name" rather than "x-name".
1270 From MH-6.8.4 patch.
1272 * Fix double free of ctinfo in user_content when using
1273 #forw with single message. From John MacMillan (and
1276 * Changed -mhnproc switch for show, to -showmimeproc.
1278 * Changed profile entry "mhnproc" to "showmimeproc".
1280 * Added "mime" option to "whatnow", which calls the program
1281 "buildmimeproc" (default is mhn -build) to process MIME
1284 * Added -build switch to mhn, to process MIME composition
1287 * Did some reorganizing of mhn.c.
1289 * Changed casting in mts/sendmail/smail.c from (char) to
1290 (signed char) so SMTP reply codes work correctly for machines
1291 which used unsigned chars by default.
1293 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1295 * Released nmh-0.15.
1297 * Added new form "scan.unseen" to distribution. It marks messages
1298 which are in any sequence in Unseen-Sequence.
1300 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1302 * Fix sign extension bugs in fmt_scan.c.
1304 * Fix m_atoi.c so that strings ending in non-digit characters
1307 * Split code in burst.c so that finding delimiters of digested
1308 messages and bursting a message into multiple messages are
1309 two separate functions (find_delim and burst).
1311 * Add workaround fo AC_PATH_PROG in configure.in, so
1312 that BSD4.4 machines can find sendmail, vi, more.
1314 * Added "-width" option to rcvtty.
1316 * Change a few variable names in zotnet/mts/client.c since
1317 they conflict with defines on AIX.
1319 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1320 unsuccessful if resulting file is less than 500 lines long
1321 (rather than 10, which was previous value), since AIX
1322 sed gives mangled file of about 200 lines.
1324 * Extract code in rcvstore.c to link message into folder,
1325 and put in own subroutine.
1327 * Extract code in refile.c to link message into folder,
1328 and put in own subroutine.
1330 * Moved code to remove messages from folder into own
1331 routine "folder_delmsgs" in sbr. Changed rmm.c and
1332 refile.c to use new routine.
1334 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1336 * Renamed m_seqok to seq_nameok.
1338 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1341 * Changed m_seqflag to return the number of a sequence rather
1342 than its bit flag. Changed its name to seq_getnum and renamed
1343 file to sbr/seq_getnum.c.
1345 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1348 * Added zero switch to m_seqadd function to zero out bits before
1349 adding message to sequence.
1351 * Renamed function m_setvis to m_setunseen, and renamed
1352 corresponding file in sbr.
1354 * Renamed function m_setseq to m_setprev, and renamed corresponding
1357 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1359 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1360 all selected messages from a sequence.
1362 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1363 selected messages to a sequence.
1365 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1368 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1370 * Renamed function pack_folder to m_packfolder, and moved it
1371 from uip/folder.c into its own file sbr/m_packfolder.c
1373 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1375 * Changed function m_gmsg to m_readfolder. Renamed file
1376 sbr/m_gmsg.c to sbr/m_readfolder.c.
1378 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1380 * Expanded rcvtty man page, and added small patch from
1381 MH-6.8.4 distribution.
1383 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1385 * Released nmh-0.14.
1387 * Comment out configure test and code for tgetent to allocate its
1388 own termcap buffer when passed a NULL argument.
1390 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1392 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1393 to show. Restructured code to handle options to various
1394 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1395 environment variable.
1397 * Added new man page `mh-draft' which documents the
1398 draft folder facility in nmh.
1400 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1403 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1404 fmtcompile.c to fmt_compile.c, and formataddr.c to
1407 * `send -help' wasn't showing the -(no)mime and -split
1410 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1412 * Released nmh-0.13.
1414 * Changed mhpath so it doesn't abort if a message sequence
1415 such as "mhpath all" expands to more than 1000 messages.
1416 Also mhpath now dynamically reallocated space for message
1417 names (The number of command line arguments is still limited
1420 * Did some general restructuring of the code in folder.c
1421 that checks for folder information, and prints it.
1423 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1425 * Changed `folder' to reallocate space for folder names if
1426 necessary. So `folders' can now handle more than 300 folders.
1428 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1430 * Change configure to use a compile check to see if the tm struct
1431 has tm_gmtoff, rather than using egrep.
1433 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1435 * Released nmh-0.12.
1437 * Had set_exists and unset_exists macros backwards.
1439 * Released nmh-0.11.
1441 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1443 * Added documentation to mh-profile.man about the various
1444 `procs' (mhlproc, showproc, lproc, etc...).
1446 * Replace the bit twiddling for SELECTED, UNSEEN, and
1447 mp->attrstats with macros.
1449 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1452 * Change fstat to stat in m_gmsg.c since Linux wants
1455 * Merge Linux patch sent in by Michel Oosterhof (original
1456 patch from bsa@kf8nh.wariat.org).
1458 * Document an undocumented MH feature. mhn -form mhl.null
1459 will suppress the display of the message header.
1461 * mhparam will now return "mhparam etcdir".
1463 * Add catproc to /config/config.c and use that in show.c
1464 and mshcmds.c, rather than hard coding in /bin/cat.
1466 * Add mhnproc to the list of `procs' in mh-profile.man.
1468 * Add configure test for lorder and tsort commands.
1470 * Commented out the padding in the `msgs` struct in h/mh.h
1472 * Change m_gmsg.c to allocate elements to the `info' array by
1473 500 elements at a time (rather than MAXFOLDERS / 5).
1475 * Add note to man page for mhmail that zero length messages are
1476 not sent. Need to use -body "" to send empty messages.
1478 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1480 * sbr/getcpy.c : assign '\0' to character, not NULL.
1482 * add m_fmsg to most programs in uip so that they explicitly free
1483 folder/message structure when done with folder.
1485 * uip/slocal.c : cleanup processing of sender. Make sure it is
1486 defined even if message is missing "From " line.
1488 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1490 * Released nmh-0.10.
1492 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1494 * Add configure check for <locale.h>. Turn on LOCALE support
1497 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1499 * Reversed previous decision to retain "From " lines in slocal.
1500 The "From " line is now removed from all messages.
1502 * inc now saves the date from the "From " envelope in the
1503 Delivery-Date header for all messages.
1505 * sbr/m_getfld.c: Clean up processing of Return-Path and
1506 Delivery-Date from the "From " envelope.
1508 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1510 * client.c: cast iaddr to int before comparing return value
1511 of inet_addr with NOTOK.
1513 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1515 * Grep test for signal names was failing on some OS'es because
1516 of missing tabs in regex.
1518 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1520 * Released nmh-0.09.
1522 * Move config files and format files to *.old before installing.
1524 * Add configure check for killpg.
1526 * msh.c: include <termios.h> instead of <termio.h> and
1529 * prompter.c: don't include <sys/ioctl.h> anymore.
1531 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1533 * Added `-mime' and `-nomime' options to `repl'.
1536 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1538 * ruserpass.c : removed conflicting prototypes.
1540 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1541 by `mesg' command. Previously only worked on BSD machines.
1543 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1545 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1546 than hard coded "/etc/utmp".
1548 * Released nmh-0.08.
1550 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1551 when accessing ndbm/db file for duplicate suppression, instead of
1552 locking database itself.
1554 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1556 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1558 * Changed the slocal actions `file' and `>' to always deliver in
1559 mbox (uucp) format rather than be determined by RPATHS config
1562 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1563 rather than mmdf format.
1565 * slocal now adds Delivery-Date field to all messages (previously it
1566 only added it to messages when delivering them to a file). The
1567 "From " line is now retained on all messages if compiling with
1568 RPATHS, rather than being discarded.
1570 * rcvpack no longer adds the Delivery-Date field to messages.
1572 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1574 * Removed the script packmbox, since it's functionality has been
1577 * Changed packf so that it uses mbox (uucp) format by default
1578 rather than mmdf format. Added options -mbox and -mmdf to
1579 packf so you can choose the preferred format.
1581 * Changed rcvpack so that it uses mbox (uucp) format by default
1582 rather than mmdf format. Added options -mbox and -mmdf to
1583 rcvpack so you can choose the preferred format.
1585 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1587 * Changed nmh to use dot locking by default (although you
1588 can still easily change this in config.h).
1590 * Simplified locking code. Removed code allowing setting of
1591 locking type in mts.conf. Now the locking type and locking
1592 directory (if any) can only be set at compile time.
1594 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1596 * Prefer getting timezone information from tm->gmtoff rather
1597 than tzset and external timezone variable.
1599 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1601 * Fixed typo in ruserpass.c in the variable toktabs.
1603 * When ruserpass was added to LIBOBJS, it was missing
1606 * Released nmh-0.07.
1608 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1610 * Add check to configure, so that if ruserpass, or _ruserpass
1611 is not found, build version of ruserpass in sbr.
1613 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1614 the code that manipulates internals of stdio, will build
1617 * Added #define to control whether to compile the simple
1618 built-in FTP client in mhn.
1620 * Added configure check for ushort and ulong. Change code
1621 to use ushort/ulong rather than u_short/u_long.
1623 * A couple of small cleanups in locking code.
1625 * Added configure check for gmtoff element in struct tm.
1627 * Added configure check for tzset.
1629 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1631 * Released nmh-0.06.
1633 * Removed code for machines that don't have socket
1634 interface (how could they get mail anyway?).
1636 * Removed code for BSD41 machines. I don't think there are
1637 many such machines around anymore.
1639 * Add configure check for function uname, and prefer it
1640 over gethostname. General cleanup of zotnet/mts/mts.c.
1642 * Change all `lseek' calls to use POSIX symbolic constants
1643 SEEK_SET, SEEK_CUR, SEEK_END.
1645 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1647 * Check lex generated file in zotnet/tws and use
1648 pre-generated version if necessary.
1650 * Released nmh-0.05.
1652 * Change to use reliable signals on all platforms that have
1653 sigaction. Change so that interrupted system calls are
1654 restarted for all signals except SIGALRM. This fixes alarm
1655 handling code in smail.c for BSD based systems.
1657 * Added lorder and tsort commands so that created libs can
1658 be linked in one pass.
1660 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1662 * Changed pidwait so that while it is waiting for a child,
1663 it should block signals rather than ignore them.
1665 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1667 * Add checks to configure for dbm_open and -lndbm.
1669 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1671 * folder -pop and folder -push were freeing some memory too
1672 quickly, which caused the entry popped from the stack to not
1673 become the current folder.
1675 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1677 * Released nmh-0.04.
1679 * Define ospeed and PC in termsbr.c is OS doesn't have
1682 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1684 * editfile will create a symbolic link to the altmsg if it
1685 can't make a link, on any machine supporting lstat. Formerly
1686 this would happen only on BSD42 based machines.
1688 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1690 * traverse (in popsbr.c) wasn't calling va_start before using
1691 variable argument list. Fixes core dump in inc when using POP.
1693 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1695 * The variable pass in remotemail needed to be set to
1696 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1699 * inc and msgchk were using -rpop by default when configured
1700 with POP support. Default is now -norpop.
1702 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1704 * By default, post will now give the SMTP HELO command with
1705 the local hostname. If you specify a hostname with the
1706 clientname: option in mts.conf file, post will give the
1707 HELO command with that name instead. If the argument to the
1708 clientname: option is empty, no HELO command is given.
1709 (From the MH-6.8.4 diff)
1711 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1713 * When using `-help' for a command, it will also print its
1714 profile compents from .mh_profile. (From MH-6.8.4 diff)
1716 * "slocal -file" will now correctly takes its input from
1717 a file (currently need to specify full path).
1719 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1721 * "slocal -debug" will now issue a warning if a non-blank
1722 line in the .maildelivery file has less than 5 fields.
1724 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1726 * Changed slocal so that code for duplicate suppression
1727 (MH config was MSGID) is always built. Added the options
1728 -[no]suppressdup to slocal to turn this on/off.
1730 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1732 * Released nmh-0.03.
1734 * Fixed problem where mark would core dump if no
1735 .mh_sequence file existed.
1737 * Fixed problem where slocal would core dump if -debug
1738 option was given, and certain headers were missing.
1740 * Added patch to slocal to add `folder' (+) action, which
1741 is shorthand for piping message to rcvstore. Updated
1744 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1746 * Changed flist option -unseen to -[no]all. Cleaned up
1749 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1751 * Fixed flist. Changed the profile component `Folder-Order'
1752 to `Flist-Order. Added option `-sequence' to flist, so
1753 you can specify the name of the sequence to search for.
1755 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1757 * A few minor portability cleanups. Changed to use PATH_MAX
1758 rather than MAXPATHLEN. Don't assume ospeed variable exists
1759 in termsbr.c. Removed some conflicting prototypes.
1761 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1763 * Add configure test to check if tgetent will accept NULL
1764 and allocate its own buffer. Borrowed from zsh.
1766 * Changed libpath to etcpath.
1768 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
1770 * Cleaned up source code and Makefiles, so that if your `make'
1771 supports the VPATH option, you can build nmh in a different
1772 directory from where the source code is located.
1774 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
1776 * Released nmh-0.02.
1778 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
1780 * Split mhook man page into man pages for rcvdist, rcvpack,
1783 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
1785 * Changed code to use strerror, rather than using sys_errlist
1786 and sys_nerr directly.
1788 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
1790 * -compat switch from install-mh removed.
1792 * Changed the default POP port from "pop" to "pop3".
1794 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
1796 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
1797 (again) to mhn.defaults.sh. Changed find_program (again) to
1798 mhn.find.sh. mhn.defaults.sh now takes the search path
1799 as an argument. Default search path is now specified in Makefile
1800 rather than in script.
1802 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
1804 * Changed mtstailor file to mts.conf. Updated man pages.
1806 * Changed si_value to si_val in mhn.c, since it conflicts with
1807 macro defined on Solaris.
1809 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
1811 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
1812 support for Emacs front-end mhe. It is on by default.
1814 * Added the following configure options: --enable-nmh-pop to
1815 enable client side pop support, --enable-nmh-smtp to enable
1816 SMTP support. Client-side pop support now compiles. Man
1817 pages for inc, msgchk, mh-chart now correctly added pop
1820 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
1822 * Added configure test for bug in C libraries where linker
1823 can't find ruserpass, but can find _ruserpass.
1825 * Fixed configure test so that termcap variable ospeed is
1828 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
1830 * Source files converted to ANSI C.
1832 * md5 now compiled separately rather than being included
1833 in mhn.c. Changed md5 to use memset and memcpy.
1835 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
1837 * Collected the error routines adios, advise, admonish, and advertise
1838 into one file (error.c), and did some rearranging of the code.
1840 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
1842 * Added awk script sigmsg.awk (originally written by
1843 Geoff Wing <mason@werple.apana.org.au> for zsh) to
1844 automatically generate signal messages for pidstatus.c.
1845 Added files sbr/signals.c, h/signals.h. Code now uses
1846 sigprocmask to block signals (if available). Code now uses
1847 signal blocking on non-BSD machines.
1849 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
1851 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
1853 * Released nmh-0.01.
1855 * Added configure code to check for type of signals functions
1856 you have (POSIX or BSD style signals). Added function
1857 SIGPROCMASK to simulate sigprocmask on machines that don't
1860 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
1862 * Added -version switch to all commands. Also added to
1865 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
1867 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
1868 POSIX termios.h style functions if present.
1870 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
1872 * Changed support/general/bootmhn.sh to output new mhn_defaults
1873 file to standard output by default (makes it easier for testing).
1874 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
1875 script to find_program.
1877 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
1879 * Added patch to uip/folder.c from exmh distribution to
1880 speed up -recurse option.
1882 * Added flist command from exmh distribution. It doesn't work
1883 yet, but it compiles :-)
1885 * Changed default location for install to
1886 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
1887 and configuration files go in nmh/etc, and support binaries go
1888 in nmh/lib. Of course, all this can now be changed in the top
1891 * Started with mh-6.8.3 as based and converted to autoconf.
1892 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
1893 Pop support and plenty of other things, are now broken.