1 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
4 fixing apparent bugs in Dan Winship's new security quoting code:
6 Since upgrading, I've been getting the following errors
7 while attempting to process some MIME messages:
9 (1) Syntax error: Unterminated quoted string
14 (2) line 1/10 (END)Segmentation fault (core dumped)
16 (2) appears to be due to the testing of an unset pointer in
17 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
18 mis-quoting a filename being handed to the shell in
19 mhshowsbr.c:show_content_aux().
21 Resolving the pointer reference issue in
22 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
23 problem in the routine.
25 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
27 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
28 prevent core dumping on packf. Here's the note from his message:
30 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
31 core on a file w/o a From line with a line >= BUFSIZ.
32 I noticed this because I had a junk file in my mail
35 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
37 * wesley.craig@umich.edu did not document his previous KPOP patch,
38 so I did so, and asked him to check what I wrote. Unfortunately
39 he didn't notice my misunderstanding of his patch. I wrote that
40 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
41 exclusively, but if you leave it as "pop3", you can use Wesley's
42 new -kpop switch on a given invocation. Instead, however, -kpop
43 turned out to be necessary on every invocation, and a KPOP user
44 complained. Applied Wesley's new patch, which makes things work
45 like I thought his original patch did. After that, did one more
46 clarifying pass to the documentation in inc.man and msgchk.man.
48 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
50 * When I fixed the long-standing makedir() bugs in January, I had
51 the code call strtoul(..., 0), which I believed to be safe as all
52 modes specified as ASCII constants in the nmh code started with a
53 leading zero (signifying octal), which I did as it would work if
54 internal constants were ever changed to hex. Unfortunately I was
55 unaware of the "Folder-Protect:" .mh_profile entry, which
56 mh-profile.man documents as an octal-only constant, with no
57 leading zero required. I've changed the strtoul() call to an
58 atooi() call and removed the misleading leading zeroes on the
59 ASCII octal constants in the code and man pages. Also changed the
60 "Folder-Protect:" example in the man page to something more
61 interesting than a duplication of the default.
63 * When I added my --enable-masquerade option, you'll note that I
64 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
65 options too wordy and I'm not sure why Richard went that route.
66 I've renamed them to just --enable-*, but the old versions will
67 still work as well (they just aren't advertised).
69 * Added a line to the "nmh configuration" output saying whether
72 * Added a new README.developers file. From the file:
74 This file is intended to provide a few tips for anyone doing
75 development on nmh. Developers who learn things "the hard
76 way" about the nmh codebase (as opposed to local info best
77 encoded in a comment) are encouraged to share their wisdom
80 Currently the topics are "autoconf files" and "directory structure".
82 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
84 * Applied, after some finessing,
85 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
87 Here's a patch that allows you to add
89 --with-smtpservers=<some.host.name>
91 to the ./configure command line to set the "servers: " line in
92 etc/mts.conf. Around here, we use "mailhost" so that all
93 machines in the current domain just talk to a central machine
94 and nothing else runs an MTA. Now, I can use
96 --with-smtpservers=mailhost
98 instead of having to remember to fix this by hand (and often
99 forgetting to do so!).
101 * Inspired by Simon's patch, added an --enable-masquerade option
102 to configure. It will set the "masquerade:" line of mts.conf.
103 You may specify a subset of the three types of masquerading, like
104 --enable-masquerade="draft_from mmailid", or leave off explicit
105 arguments to enable all three types.
107 * Alphabetized the --enable and --with options in configure.in and
108 INSTALL and added documentation of the two new options to the latter.
110 * Added new dependency for mts.conf: Makefile. If this isn't
111 done, then when you reconfigure nmh with new values for
112 --enable-masquerade or --with-smtpservers, you'll fail to get an
113 updated copy of mts.conf.
115 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
117 It seems that some MUA's didn't handle y2k very well - ELM
118 seems to be one of them, and Ultrix's DXmail (based on MH!).
119 I've got a few emails this month that look like:
121 575 Jan 00 Xxxxxx Xxxx 3603 ...
123 22+ Jan 00 Xxx Xxxxx 1771 ...
125 The first has "15 Jan 100" as the date and the second has
126 "19 Jan 00" as the date. The following works around this so
127 that scan, show, sortm, etc work ok.
129 I put Simon's patch under the control of a new #define called
130 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
131 acconfig.h about when you might not want to #define it.
133 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
134 lexed on Solaris 2.6. Added missing dependency in
135 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
137 * Added scan.MMDDYY and scan.YYYYMMDD format files.
139 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
141 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
143 With the patch below, you can add lines like:
145 mhshow-suffix-application/msword: .doc
146 mhshow-suffix-application/PostScript: .ps
148 to the mhn.defaults file to append the given suffix to a
149 scratch file. This allows applications which require a
150 certain suffix to run properly.
152 * Removed -force_html from lynx entry in mhn.defaults.sh (I
153 believe older versions of lynx lack that option) and added
154 "mhshow-suffix-text/html: .html".
156 * Modified username_extension masquerading to only use the
157 extended address on generated [Resent-]From: lines and SMTP
158 envelope From:. With Neil's original implementation, nmh's global
159 idea of the username was changed, which would result in inc lying
160 and saying you had no new mail because it was looking for a
161 mailbox called, for instance, "dan-nmh" (where username was "dan"
162 and $USERNAME_EXTENSION was "-nmh").
164 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
166 There's a wrap-around problem that affects the implementation
167 of Zeller's congruence in dtime.c. This causes the day-of-week
168 calculations to fail for dates after Feb 29, 2000 (probably up
169 until some year far in the future).
171 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
173 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
175 I finally tracked down the problem in msh that was causing
176 errors whenever I tried to examine a 'mmdf' style mailbox.
178 It turns out that not enough memory was being allocated with
179 calloc(), causing memory pointers to be overwritten and
182 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
184 * Changed the new "plussed_user" option to mts.conf's
185 "masquerade:" to "username_extension" after getting feedback from
186 qmail users, who use '-' as a separator rather than '+'. Removed
187 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
188 which needs to include the appropriate separator for your MTA
189 ('-', '+', or whatever) as its first character.
191 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
193 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
195 * Added a note to DIFFERENCES stating that it's out-of-date
196 (Richard was the last one to update it) and that we should
197 consider only documenting incompatibilities with MH there.
199 * Implemented (and documented) a third kind of username
200 masquerading: "plussed user" masquerading. This one was suggested
201 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
202 "plussed user" feature, where mail sent to <user>+<string> will be
203 delivered to <user>. When it's enabled, it's controlled by the
204 $USERPLUS environment variable. How is it enabled? Well, that
207 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
208 changed it so that rather than being a boolean, it can be set to
209 any combination of the three values "draft_from", "mmailid", and
210 "plussed_user". Thus it is now possible to enable the three types
211 of masquerading individually.
213 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
214 where if it was turned on, ','s would no longer be considered
215 GECOS field delimiters.
217 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
219 * Changed the GECOS-field '&' translation behavior to be
220 controlled by the BSD42 #define rather than GCOS_HACK, since it's
221 apparently always appropriate on OSes where BSD42 is #defined, and
222 never appropriate on any other OSes. Thanks to Kimmo Suominen for
223 responding to my "What is this code here for?" comment in mts.c
224 and explaining the feature.
226 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
228 * Upped the version number to 1.0.3+dev (ideally this should be
229 done by whoever makes a release tar file, immediately after doing
232 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
233 patch, posted to comp.mail.mh, which he says prevents loss of mail
234 when inc'ing into a full filesystem.
236 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
237 so that stamp-h.in will be different each time configure.in and
238 related files are changed, making it easier to check it in (which
239 is necessary to prevent unnecessary autoconf calls).
241 * My declaration of initgroups() in slocal.c to eliminate the "no
242 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
243 use AC_EGREP_HEADER to see where initgroups() is declared, if
246 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
248 * Fix security hole in mhshowsbr.c which allowed untrusted shell
251 * Released nmh 1.0.3.
253 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
255 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
256 be surrounded by single quotes, as a shell is not spawned when
257 just saving files, and the filenames will end up with literal
258 quotes embedded in them.
260 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
262 * Whoever originally added the -help switch to all the commands
263 got too cute and had the option itself print out as "-(help)" in
264 the -help output. One theory is that they were making reference
265 to the fact that clearly you know about the -help option since
266 you're currently looking at its output. I think it's a bad idea
267 to overload the meaning of the parentheses, however -- they're
268 supposed to indicate what abbreviated prefix of the switch you're
271 The other theory is that because you can say something like
272 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
273 by the same list of switches you get with -help, they were saying
274 you can "sorta" abbreviate "-help" as "-". You don't get the
275 "Usage:" string, though, so it's not really the same thing.
277 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
279 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
281 The following patch fixes a problem with requesting a
282 service key for a machine that has multiple 'A' records. It
283 also makes "-kpop" a command line option, for users who
284 would like to use both "kpop" and "pop".
286 Did no testing of the new features, as I don't have access to a
289 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
291 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
293 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
295 * All %-escapes in mhn.defaults that actually expand to something
296 should be surrounded by single quotes. Added quotes to the ones
297 in mhn.defaults.sh that were missing them.
299 * Added check for lynx to write mhshow-show-text/html line in
302 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
304 * makedir() had multiple bugs dating back to MH. An octal
305 constant was apparently being interpreted as decimal, resulting in
306 directories with no user read or execute permissions, making
307 nested directory creation fail. And there wasn't even an
308 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
309 in .mh_profile) on the outer directories of a nested directory.
311 * A second `make install' would always fail because the check for
312 whether mh_profile.5 existed was written incorrectly.
314 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
316 * Added documentation on both types of masquerading to post's man
319 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
321 * Doug's portability fix of my setgid inc autodetection had a
322 caching bug -- if you re-ran configure, uip/Makefile would be
323 corrupted, and installation would bomb out on OSes where inc needs
326 * Implemented a new kind of email address masquerading. Usually,
327 when a user writes a custom "From:" header in a draft, nmh uses it
328 rather than generating one. However, the user's true address is
329 used in the SMTP envelope "From:" and is revealed in the "Sender:"
330 header. Now, when mmailid is set to non-zero, the envelope
331 "From:" uses the address specified in the draft "From:" header,
332 and there is no "Sender:" header. This is useful when sending on
333 behalf of a remote POP3 account or when remote mail robots
334 incorrectly use the envelope "From:" in preference to the body
335 "From:". This processing has only been implemented for post, not
336 for the undocumented spost (which was already missing some "From:"
337 processing that post has).
339 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
341 * Got rid of the rest of the gcc -Wall warnings that I didn't have
342 time for on 1999-07-15 (and, it would seem, some new ones people
343 introduced since then). The primary ones were the warnings that
344 default prototypes were being used for [v]snprintf() and
345 str[n]casecmp(). As of right now, there are _no_ compilation
346 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
349 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
351 * Move mhtest from bindir to libdir.
353 * Move sendfiles from libdir to bindir.
355 * Updated sendfiles manpage to reflect this change.
357 * Added documentation for -build and -file switches to repl and
358 forw manpages (patch from Peter Maydell).
360 * Fixed interaction between specifying -cc in profile and -group on
363 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
365 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
366 not unanimous support for my proposed even/odd release/developer
367 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
370 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
372 * Upped the version number to 1.0.3. If we don't do this, then
373 when people report bugs against 1.0.2, we won't know "which" 1.0.2
374 they're talking about (since the development source is publically
375 available via CVS). I think the Linux kernel version numbers are
376 a good model, so the next time we roll a tarball, it should be
377 version 1.0.4 (or higher -- anyhow, an even-numbered version).
379 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
381 * Released nmh-1.0.2.
383 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
385 * Added check for whether "libtool" is in fact gnu libtool. If
386 it is, it is not used. This is the wrong behavior. If vendor
387 XYZ later on decides to create yet another libtool, we'll be
388 caught again. This works for now.
390 * Minor updates to MACHINES refering to Mac OS X.
392 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
394 * Added check for "libtool" (a ranlib type tool for Mac OS X)
395 and modified Makefiles so that nmh will build under Mac OS X.
397 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
399 * Changed repl defaults to partly revert to MH behaviour,
400 "-cc all" is now only implied with -group.
402 * The replcomps template includes cc: header again (as in MH).
404 * Updated repl man page to reflect these changes.
406 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
408 * Tweaked configure to handle Solaris and SunOS after the BIND
409 changes. Both need more cleanup.
411 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
413 * Removed BIND define and replaced it with a check for
414 gethostbyname (to determine if the host is DNS aware) and a
415 check for sethostent. This appears to be the right thing to
416 do, but there is no explanation of the reasoning behind the
417 BIND define in the code and it appears to have been used for
420 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
422 * Updated manpages Makefile to link mh-profile.5 to
423 mh_profile.5 after installation. Suggestion from Richard Cohen
424 <richard@jubjub.demon.co.uk>.
426 * Modified configure.in to check for _IO_write_ptr and libio.h
427 to determine whether to define LINUX_STDIO instead of using
430 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
432 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
433 multiple machines in the past where the mail spool was a symlink
434 to a directory on another device with more free space.
436 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
438 * Fixed a portability problem in Doug's fix of a portability
439 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
441 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
443 * Added config.sub and config.guess to the list of files to be
446 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
447 added if a list of addresses was split over several header lines.
449 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
450 macros, regardless of platform.
452 * Allow q to quit mhshow, and n to skip to next part. Patch from
453 Kimmo Suominen <kim@tac.nyc.ny.us>.
455 * Modified mhstore to recognize attachments created by sendfiles
456 with x-conversions=gzip.
458 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
460 * added explicit cast to long from time_t for tclock in
463 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
464 it's needed for ioctl() anyway. This prevents a warning about
465 implicit definition of ioctl().
467 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
468 "User Configuration" section of config.h (moved @TOP@ in
469 acconfig.h) so they're easier to find, should someone actually
470 want to mess with them.
472 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
474 * updated Makefile.in so it recognized COMPLETION-TCSH and
475 COMPLETION-ZSH (only used in make nmhdist).
477 * added prototype for ruserpas to <h/prototypes.h>. Fixes
478 warnings in mhparse.c and mhbuildsbr.c.
480 * added include checks for <time.h> and <sys/time.h> to
481 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
482 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
484 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
485 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
486 warnings about implicit definition of mts_init().
488 * added <grps.h> to slocal.c to prevent warnings about
491 * added <h/signals.h> to prevent warning about missing SIGNAL
494 * added function prototypes to smtp.c, whatnowproc.c,
495 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
498 * explicitly declared mbx_style in mshcmds.c and lused in
499 fmtdump.c as type static int instead of just static to
502 * various code cleanups to prevent ambiguous statements
503 (brackets for if/thens and parens for complicated if
507 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
509 * commented out _cleanup() in mf.c because it's the only
510 location in all of the source code where it exists. It was
511 preventing compilation on at least linux.
513 * Added check for <db1/ndbm.h> which is the new location where
514 linux systems appear to be stuffing this header file.
516 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
518 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
520 * added mh_profile SEGV patch from Richard Cohen
521 <richard@jubjub.demon.co.uk> that prevents crashing when
522 mh_profile doesn't end in a newline. A similar patch was
523 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
525 * fixed bug in associated with MAILGROUP #define (group "mail"
526 is not universal) -- hard to believe, but true.
528 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
530 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
532 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
534 * Automated #define of MAILGROUP and installation of inc as setgid mail
535 when the mail spool directory isn't world-writable.
537 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
539 * slocal -debug used to leave a file in /tmp for each message
540 processed. Very bad for folks with slocal -debug in their .forward!
542 * Got rid of a ton of compilation warnings. Most were "junk"
543 warnings due to the use of gcc -Wall (without -Wno-parentheses),
544 but a few represented real bugs. There remain many warnings to be
545 tackled that are due to missing function prototypes (e.g. snprintf()).
547 * Default rcvdistcomps no longer puts a copy of all outgoing
548 messages in outbox. Added an rcvdistcomps.outbox that does.
550 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
552 * Updated configure to check for mkstemp (available on OpenBSD) and
553 substitute it for mktemp if available.
555 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
557 * Added config.sub and config.guess and updated acconfig.h and
558 configure.in to automatically detect system type and set the
561 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
563 * Released nmh-1.0.1.
565 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
567 * Fixed flist to properly deal with relative folder names.
568 Problem noted by Jerry Peek <jpeek@jpeek.com>.
570 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
571 well as the Kerberos 5 compat libraries. Based on a patch from
572 Assar Westerlund <assar@sics.se>.
574 * Added a check in configure.in to test if modf is in libc and
575 link with libm if not. This is needed by at least Digital UNIX.
576 Problem pointed out by Kevin Oberman <oberman@es.net>.
578 * Fix a bug from the "mhn -show" to "mhshow" renaming that
579 made the "list" command in whatnow not work for some users.
580 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
582 * Replaced "extern int errno" with "#include <errno.h>" in a
583 number of files. Suggested by Stephen Wilson Bailey
586 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
587 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
589 * Fixed a segmentation fault in inc. Patch originally from Ruud de
590 Rooij <r.c.m.derooij@twi.tudelft.nl>.
592 * Allow display of 8bit encoded messages. From Kimmo Suominen
595 * Fixed repl to not add line breaks in the middle of long
596 addresses when building a reply. From Ruud de Rooij
597 <r.c.m.derooij@twi.tudelft.nl>.
599 * Added -library switch to spost so it can parse user aliases like
600 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
602 * Changed configure.in's check for sigsetjmp to properly deal
603 with systems like Linux where it is a macro. From
604 <elleron@servtech.com>.
606 * Fixed a bug in whatnow that could cause it to sometimes exit
607 without prompting the user. Based on a patch by Richard Geiger
610 * Added code to deal with SIGPIPE in mhl so it doesn't print
611 "Broken pipe" if you quit out of the moreproc.
613 * Documentation: Added a note to MACHINES about Irix make. Added a
614 pointer to the online copy of the MH book in INSTALL. Added
615 some additional information to the whatnow and packf man pages,
616 suggested by Jerry Peek <jpeek@jpeek.com>.
618 * Updated INSTALL, FAQ, etc to not refer to Richard as the
619 maintainer or math.gatech.edu as the home any more.
621 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
625 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
626 mbx_open so that the mode of zero length maildrops
627 would not be changed.
629 * Replaced the substitute version of snprintf() with the
630 one from the Apache web server.
632 * Changed to default mode for creating new messages to 0600
633 (this should have been done a long time ago).
635 * Changed "flist" to handle searching for multiple sequences
636 for each folder. Also flist will now correctly split
637 Unseen-Sequence if it consists of multiple sequences.
639 * Added new switches `-unlink' and `-nounlink' to "refile".
641 * Added new switches `-unlink' and `-nounlink' to "rmm".
643 * More cleanups of slocal output. Changed adorn() to
644 send to stdout, instead of stderr (to match rest of
647 * Merged mbx_create() into mbx_open, so that creating and
648 opening a nonexistent maildrop is done atomically. This
649 removes a bad race condition.
651 * Fixed bug that caused slocal to be unable to save to MMDF
654 * Added new wrapper function usr_folder() to slocal.c to
655 handle adding message to folder (currently, it still uses
656 usr_pipe() to call rcvstore).
658 * seq_list() checks for empty folder before scanning for
659 sequence information.
661 * num_digits() in flist.c and folder.c now returns correct
662 value for 0. Also added sanity check.
664 * folder_delmsgs() now correctly decrements internal message
667 * Don't attempt to read sequence information if folder
670 * Split seq_read into seq_public and seq_private.
672 * Small change to sigmsg.awk, since newer versions of gawk
673 interpret 034 as octal.
675 * In flist, don't scan for sequence information in empty folder.
677 * Updated mhn.defaults.sh to output profile entries for mhshow,
678 mhstore, and mhbuild.
680 * Changed configuration parameter "mhn-access-ftp" to
681 "nmh-access-ftp". Updated man pages
683 * Moved the code in InitMultipart to reverse the order of the
684 parts in a multipart, into its own function "reverse_parts()".
686 * Changed code in mhbuildsbr.c to store unencoded content
687 in the c_cefile structure when building.
689 * Changed code in mhoutsbr.c to look for unencoded content
690 in the c_cefile structure when outputing message.
692 * Changed configuration parameter "mhn-cache" and
693 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
694 since it is used in mhstore, mhlist, and mhshow. Updated man pages
696 * Change configuration parameter "mhn-storage" to
697 "nmh-storage", since it is now used in mhstore, mhlist,
698 and mhshow. Updated man pages
700 * Add autoconf support for KPOP (kerberized pop).
702 * Add autoconf support for Hesiod.
704 * Split routines to output a message given a Content structure
705 (output_message, output_content, write7Bit, etc..) to a new
708 * Split output_content(), into output_content() and build_headers().
710 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
711 list of header fields, rather than reopening the message.
713 * Added free_header() to mhfree.c to free structures containing
714 header field information.
716 * Changed get_content() to use the linked list of header fields
717 when parsing the various MIME headers (Content-XXX).
719 * Changed get_content() to store linked list of header field
720 values when parsing a content.
722 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
723 routines in mhcachesbr.c to handle the content cache.
725 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
726 cache_content) into new file mhcachesbr.c.
728 * More calls to sprintf/strcpy (primarily in mhparse.c
729 and mhbuildsbr.c) converted to snprintf/strncpy.
731 * When a message is displayed with `mhshow', it is now
732 removed from the "unseen" sequence.
734 * Change the default "showmimeproc" to "mhshow".
736 * Split "mhn -show" off into separate command "mhshow".
738 * Split "mhn -store" off into separate command "mhstore".
740 * Split "mhn -list" off into separate command "mhlist".
742 * Add sanity checks to context_find(), context_replace(),
743 and context_del(), to abort if context file hasn't been
746 * Add calls to context_read(), to the beginning of all nmh
747 commands (instead of being called indirectly by context_find).
749 * Changes the "substitute" version of vsnprintf/snprintf for
750 operating systems without native versions, to just call the
751 native vsprintf(), and ignore the buffer length. This is
752 faster, but less secure than the previous version that used
753 temporary files. This should only be a problem for systems
754 which do not have a native snprintf(), and require `inc' to
757 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
759 * Changes client() routine to take additional parameter, which is
760 the buffer length of the parameter "response". Then added
761 buffer length checks for this parameter.
763 * Changed getws() to get_fields(), since that is apparently the
764 name of a wide character version of gets() on some archetitures.
766 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
768 * Change the code in most of the commands that take multiple
769 message names/sequences/ranges on the command, such that
770 the msgs array is expanded dynamically. This removes most
771 of the limits on the length of command lines.
773 * Add additional parameter to copyip(), to specify the
774 maximum number of strings that can be copied (security
777 * Create new function getarguments(), to massage the argument
778 vector before parsing it (add any arguments from your
779 profile to the beginning of the argument vector). This
780 also removed the general limit on the number of command line
783 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
787 * Added a new command "delete", that is available during
788 a "whatnow" session. It is equivalent to "quit -delete".
790 * Added another parameter to editfile (in whatnowsbr.c),
791 that controls whether editfile should remember the last
792 program that was exec'ed. This way the whatnow command
793 "mime", will not be re-executed if "edit" is later given
796 * Changed whatnowsbr.c, so that whatnow doesn't abort if
797 mhbuild returns an error.
799 * Added parameter to sendsbr(), so you may specify whether to
800 rename the draft file.
802 * Pass delay time to splitmsg() as a parameter, rather than
803 use a global variable.
805 * Moved code to rename draft file after sending message from
806 splitmsg and sendaux, to sendsbr.
808 * Removed all the code in viamail to split messages and then
809 mail them. Replaced this with the standard sendsbr.c routines.
811 * Changed sendsbr(), so that when splitting messages into
812 messages of type "message/partial", the header fields that
813 are copied are more compliant with RFC-2046.
815 * Fixed mhbuild to track temporary files better. They are
816 now correctly removed when mhbuild aborts.
818 * Created a new man page for "sendfiles". The information
819 about "mhn -viamail" in the "mhn" man page was moved to
822 * Changed the name of the "viamail" shell script to
823 "sendfiles". Modified "sendfiles" to use the new
826 * Moved the functionality for "mhn -viamail" out of mhn,
827 and into a separate executable called "viamail".
829 * When storing MIME contents to a folder using mhn -store,
830 they are now accumulated in a temporary file, and then added
831 to the folder using folder_addmsg().
833 * Moved code to save content to a folder from store_content
834 to new function output_content_folder.
836 * Moved code to save content to file from store_content to
837 new function output_content_file.
839 * Moved code to parse storage format string from store_content
840 to new function parse_format_string.
842 * Fix copy_some_headers() in mhstoresbr.c, so that the
843 correct header fields in the first enclosing message/partial
844 will be copied (according to RFC2046), when using mhn -store
845 to reassemble messages of type message/partial.
847 * Fixed bug to openFTP() in mhparse.c, that caused the
848 tmp file to not be removed, when transferring a
849 message/external file from ftp.
851 * Moved the code in mhparse.c to process -auto switch (scan
852 contents for the attribute "name"), to a new function
853 "get_storeproc" in mhstoresbr.c.
855 * Moved routines to free data structures related to MIME
856 content from mhparse.c and mhbuildsbr.c, to new file
859 * Moved code to show/display MIME content into new
862 * Moved code to store MIME content from into
863 new file mhstoresbr.c
865 * Moved code to parse MIME content into new
868 * Moved code to list information about MIME content
869 into new file mhlistsbr.c.
871 * Move part_ok(), type_ok(), content_error(), flush_errors(),
872 and set_endian() to new file mhmisc.c.
874 * Start to isolate the code to show, list, and store MIME
875 messages. One side effect is that only one flag (-show,
876 -list, or -store) can be used at a time now.
878 * mhn -store -auto wasn't storing file in correct directory.
880 * Removed a few dead variables from sbr/ruserpass.c
882 * move code for creating tmp files, and renaming the
883 the composition draft in mhbuild, from build_mime()
886 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
887 the -[no]auto switch (which isn't used in mhbuild).
889 * split mhn.c into mhn.c and mhnsbr.c (name later changed
892 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
894 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
898 * Added (unlisted) options [no]dashstuffing to send, post,
899 and whatnow to determine whether to do RFC934 quoting
900 (dashstuffing) for encapsulated BCC messages. The default
901 is still the same (dashstuffing).
903 * Changed the undocumented feature "nodashmunging" in forw
904 and mhl, into the documented feature "nodashstuffing". The
905 default for forw, is still "dashstuffing" for backward
906 compatibility, although I don't believe that bursting
907 RFC934 digests is very common anymore.
909 * Added an option to define REALLYDUMB in the default config.h.
910 But it is not on by default.
912 * moved creation of config file mts.conf from zotnet/mts
913 to etc. This simplified the Makefile in zotnet/mts.
915 * simplified directory support/general to etc.
917 * removed unneeded directory support/bboards.
919 * split getusername() into getusername() and getuserinfo().
921 * Changed getusr() routine to getusername().
923 * Slight cleanup in folder_pack.c on code that records the new
924 number of the "cur" message when packing.
926 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
930 * Change install process, so that hard linking the correct mts
931 library to libmts.a, is not necessary. The final link process
932 uses the original name of the library.
934 * Fixed bug in flist.c and folder.c, so that symbolic links which
935 point to directories, will not decrement the number of directory
938 * Split the function list_content (in mhn.c and mhbuild.c) into
939 list_content and list_debug.
941 * Don't pack (folder -pack) an empty folder.
943 * Exit gracefully in flist.c, if no sequence is specified,
944 and no "Unseen-Sequence" is given in nmh profile.
946 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
950 * Small clarification to the man page for `ali'.
952 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
953 are given, that order doesn't matter.
955 * Fix bug in seq_list.c when realloc'ing for
958 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
962 * Add new section on "Transfer Encodings" to man page for mhbuild.
964 * In mhbuild.c, split compose_content into compose_content
965 (parse and execute composition string), and scan_content (scan
966 content, decided transfer encoding, check for clash with boundary
967 string). I did a good amount of rearranging of this code.
969 * Moved definitions for data structures for parsing MIME
970 messages from mhn.c and mhbuild.c to a new include
973 * Small amount of rearranging in sendsbr.c
975 * Small changes to MAIL.FILTERING file.
977 * Add the file MAIL.FILTERING to nmh distribution.
979 * Add line to packf so that if message begins with
980 "X-Envelope-From:" field, it is converted to "From ".
982 * Fix packf to add "From " line to beginning of message,
983 even if Return-Path doesn't exist.
985 * Add note to MACHINES file that on Linux, configure
986 doesn't find the functions sigsetjmp/siglongjmp.
988 * Fix configuration for machines that don't have (or find)
989 sigsetjmp/siglongjmp.
991 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
995 * Add a configure check for sigsetjmp. Add some conditional
996 #define's in h/signals.h in case it's not found.
998 * Added additional notes about -auto switch in mhn man page.
1000 * Added note about MM_CHARSET environment variable to
1001 mh-profile(5) man page.
1003 * Fix signal problem in mhn.c (change setjmp/longjmp to
1004 sigsetjmp/siglongjmp).
1006 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1008 * Released nmh-0.22-pre1.
1010 * Changed the first line in mhl.format from
1011 " -- using template mhl.format -- " to a blank line.
1013 * Added note about automimeproc to mh-profile man page.
1015 * Reorganize the main entry point for parsing a MIME message
1016 or file in mhn. Add new function parse_file() as new main
1017 entry point for parsing MIME files.
1019 * Add note to mhn man page, that "mhn -file -" will accept the
1020 source message on the standard input.
1022 * Changed a sanity check in folder_realloc that was too strict.
1024 * -norfc934mode is now the default for mhbuild,
1025 rather than -rfc934mode.
1027 * Fix mhbuild, so that Content-Description and RFC-822 comments
1028 from #forw directive will be correctly included if there is
1031 * Change mhn to correctly default parts of multipart/digest to
1032 message/rfc822 (leftover code from rfc934mode was removed).
1034 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1037 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1039 * Released nmh-0.21.
1041 * If the file given to mhbuild is "-", then accept the draft on
1042 standard input, and output the MIME message to standard output.
1044 * Cleaned up code in mhbuild.c that decides what transfer
1047 * Cleaned up code in mhbuild.c that decides what character set
1048 to use for text contents.
1050 * Removed old hpux specific code from zotnet/tws/lexstring.c
1052 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1054 * Released nmh-0.21-pre2.
1056 * Added the "decode" variable to mhl.format and mhl.header.
1058 * Added new variable "decode" to mhlsbr.c to decode text in
1059 header fields as per RFC-2047.
1061 * Make sure that when decoding RFC-2047 header fields, that any
1062 spaces at the ends of the encoded text are not ignored, but the
1063 spaces between encoded word are.
1065 * Removed #ifdef's for MIME. MIME support is always compiled in.
1067 * scan/inc will now decode both Subject and From lines as
1068 RFC-2047 encoded header fields.
1070 * Added new function write_charset_8bit() to sbr. It returns
1071 the character set to use for 8bit text in composition draft.
1072 Changed mhbuild to use this function.
1074 * Split mhn man page into man pages for mhn and mhbuild.
1076 * mhn -show will only now only use default method for content
1077 of type plain, if it is NOT a part of a multipart/alternative.
1079 * Split mhn -build into mhbuild. Did some code cleanup.
1081 * Added support for %(decode) to fmtdump.c.
1083 * check_charset() now accepts US-ASCII as a subset of any
1084 ISO-8859-X character set.
1086 * Changed the default "showproc" to mhl, instead of the
1089 * When reading file into mhn composition file, only need read
1090 permissions, not write permissions.
1092 * Added own version of strcasecmp to distribution, since
1093 nmh calls it frequently with NULL pointers (ughh).
1095 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1098 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1100 * Released nmh-0.21-pre1.
1102 * If a message is missing charset parameter to text/plain, show
1103 will assume US-ASCII, rather than just calling showmimeproc.
1105 * Change show.c and mshcmds.c to use check_charset to see if text
1106 message contains valid character set.
1108 * Added new scan format file "scan.nomime" to support/general
1109 that doesn't do any RFC-2047 decoding.
1111 * Modified all the scan format files in support/general to do
1112 RFC-2047 decoding of Subject field.
1114 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1115 ignore whitespace between two valid encoded words, but not
1116 between an encoded word and normal text.
1118 * Created new file sbr/check_charset.c. Moved code from
1119 fmt_rfc2047.c to check for valid character set to this file.
1121 * Added format escape %(decode) to decode contents of "str" register
1122 as a RFC-2047 header field.
1124 * The command install-mh now recognizes the switches -version
1127 * Added a new argument to print_help.c to decide whether to
1128 print profile entries (needed for install-mh to prevent weird
1131 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1132 is initialize to max (mp->lowmsg, 1) rather than always 1.
1134 * Changed macros for sequence/attribute manipulation so that
1135 message status array doesn't need to always start at 1.
1137 * Small cleanups in folder_realloc().
1139 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1141 * Released nmh-0.20.
1143 * Added configure option --with-pager=PAGER.
1145 * Added configure option --with-editor=EDITOR.
1147 * Changed the default format file for mhl (mhl.format) to
1148 also ignore (not display) the header fields Content-Type,
1149 Content-Transfer-Encoding, and Content-ID
1151 * Fixed core dump in addrsbr.c when using %(proper) format function
1152 and the To: line was missing.
1154 * Added the file ZSH.COMPLETION to the distribution.
1156 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1158 * Released nmh-0.20-pre2.
1160 * Added new switch -snoop to both `msgchk' and `inc', so you can
1161 watch the POP transaction.
1163 * Changed "replgroupcomps" to check for Mail-Followup-To header
1164 first, and use it if available.
1166 * Changed "replcomps" to check for Mail-Reply-To header
1167 first, and use it if available.
1169 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1171 * Released nmh-0.20-pre1.
1173 * Changed seq_list.c to dynamically enlarge the buffer for
1174 collecting the message ranges in a long sequence line.
1175 This should remove the last hard limit on the size of a
1178 * Changed seq_read.c so that can read long sequence lines.
1179 It will use multiple calls to m_getfld() when m_getfld()
1180 returns the state FLDPLUS.
1182 * Changed brkstring.c to dynamically add more space for pointers
1183 if necessary. This is needed when splitting up large sequence
1186 * Did some small cleanups in seq_save.c.
1188 * Added new switches `-[no]unseen' to rcvstore, to control
1189 whether new messages are added to Unseen-Sequence.
1191 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1193 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1194 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1196 * Changed "replcomps" to not include CC and TO lines so that
1197 that reply message is only directed at the author of the
1198 message to which you are replying.
1200 * Added new switch `-group' to command repl, which causes repl
1201 to use new forms file "replgroupcomps". This is intended for
1202 making group replies.
1204 * Removed #ifdef for ATHENA.
1206 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1208 * Released nmh-0.19.
1210 * Fix repl,forw so that switch `-form file' will not abort
1211 as ambiguious (silly mistake on my part).
1213 * Cleaned up the mhn man page. Added info about a few escapes
1214 for the formatting/display strings that were not documented
1215 (%%, %t). Moved the BNF grammar for the mime composition file,
1216 to the end of the man page.
1218 * Added the options -[no]format to the command repl. The
1219 switch `-format' will filter the message to which you are
1220 replying with the standard message filter "mhl.reply", which
1221 is now included in the distribution. The `-noformat' option
1222 will negate the use of -format or -filter and not include
1223 the message to which you are replying in the draft.
1225 * Did some cleaning and reorganization on many of the man
1228 * Added debugging switch `-debug' to mhparam, which displays
1229 the values of all `procs' (and some other misc configuration
1230 info) that nmh keeps in global variables.
1232 * When using `refile -preserve', if a conflict occurs, then use
1233 the next available number above the message number you wish
1236 * In forw.c, split the code for creating MIME style forwarding
1237 out of copy_draft, and into copy_mime_draft.
1239 * Move routines in mark.c to print sequences, into new
1240 file sbr/seq_print.c
1242 * flist will now update the current folder.
1244 * Added the switches -[no]fast to flist, to replace
1245 -[no]total. The previous switches are still accepted
1246 but now undocumented.
1248 * More reorganization in flist of the code for
1251 * The command "flist +foo -all" will now scan the folder
1252 "foo" and all its 1st level children.
1254 * Add missing include file <h/mh.h> to sbr/snprintf.c
1256 * Fix alarm bug in rcvtty, so that when it calls external
1257 process, the alarm is never longer than 30 minutes.
1259 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1261 * Released nmh-0.18.
1263 * Fixed bug in mark, so that "mark -list -seq foo" will
1264 correctly indicate if "foo" is a private sequence. I found
1265 this bug mentioned in Jerry Peek's book.
1267 * Simplified the code in seq_setcur(), since seq_addmsg() now
1268 retains the public/private status of sequences.
1270 * Changed sequence handling so that if the switches -public
1271 or -nopublic, are not specified for the commands mark, pick,
1272 or rcvstore, then existing sequences will retain their
1273 previous public/private status.
1275 * mhparam now handles the mh-sequences profile entry
1278 * flist -all will now also check readonly folders (for
1281 * Improve the leaf optimization for folder command.
1282 It will now track the number of directories in a folder,
1283 and stop stat'ing files once it has hit all the subfolders.
1285 * Renamed m_getfolder to getfolder. Changed getfolder to
1286 take option to determine whether it should get current
1287 folder, or just default folder (Inbox). Changed rcvstore,
1288 inc, and rmf to use the new getfolder.
1290 * flist now indicates if a sequence is private.
1292 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1293 wait for stopped processes.
1295 * conflict will dynamically allocate space for group names,
1296 so it can now handle system with more than 100 groups.
1298 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1300 * Released nmh-0.18-pre4.
1302 * Check if we have enough message status space, before we
1303 call folder_realloc() in burst, mhpath, and m_draft().
1305 * mhn will now correctly identify a formatting string of "-"
1306 for the option -store, and send content to stdout.
1308 * Change the way that memory for message status is
1309 allocated. It is dynamcially allocated separately from
1310 the folder/message structure. This required changing
1311 folder_read.c, folder_realloc.c, folder_free.c.
1313 * Removed all the MTR code (experimental code for message
1316 * Renamed m_readfolder.c to folder_read.c and simplified
1319 * Renamed m_freefolder.c to folder_free.c.
1321 * Add function trim() to slocal.c to pretty print
1322 the debugging output.
1324 * Changed the name of m_packfolder() to folder_pack().
1325 Changed the name of m_remsg() to folder_realloc().
1327 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1329 * Released nmh-0.18-pre3.
1331 * Changed installation to add `flists' which is hard linked
1332 to `flist'. This is a equivalent to `flist -all'.
1334 * For flist, -showzero is on by default.
1336 * Major changes to flist. Default is now for flist to search
1337 current folder. The switch `-all' is now used to specify
1338 searching all top level folders. The new switch `-showzero'
1339 is used to print out folders that don't contain any messages
1340 in the given sequence.
1342 * Split BuildFolderList in flist.c into 2 functions
1343 (BuildFolderList, BuildFolderListR). Changed these functions
1344 so that flist now does better leaf optimization, and will stop
1345 stat'ing directory entries when it knows it has hit all the
1346 subdirectories of a given directory.
1348 * Reorganized code in folder.c, so that all relevant folders
1349 are scanned first and information recorded. Then all the
1350 folder summaries at printed out at one time.
1352 * Made the options of folder(s) more orthogonal. Now
1353 "folder -all -noheader -nototal" will do the right thing.
1355 * Added `-noall' switch to folder, for completeness.
1357 * Changed the default mode for creation of new folders
1360 * Slightly changed the format for flist. It now indicates
1361 if a folder is current. Also the width of the various
1362 fields are now calculated at runtime.
1364 * Changed the format for folder(s). Folder names
1365 are now left justified. The width of the various fields
1366 are calculated at runtime.
1368 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1370 * Released nmh-0.18-pre2.
1372 * Add paragraph to man page for install-mh and to INSTALL file
1373 about checking for global mh.profile.
1375 * Renamed m_find() to context_find().
1376 Renamed m_replace() to context_replace().
1377 Renamed m_delete() to context_del().
1378 Renamed m_update() to context_save().
1379 Renamed m_getdefs() to context_read().
1380 Renamed m_foil() to context_foil().
1382 * Change rcvstore to use routine folder_addmsg(), instead of
1383 adding message to folder itself.
1385 * Changed refile, so that if the switch -preserve is used,
1386 and a conflict occurs for a particular folder, then folder_addmsg()
1387 will just use next highest available number for that folder,
1390 * Make folder_addmsg() more robust. It will make repeated
1391 attempts to link file into folder if link returns with
1394 * Fix bug, so that that if forking sendmail, HELO will be sent
1395 unless clientname: option is defined but empty (so now it
1396 is the same as the direct smtp code).
1398 * Changed sprintb to snprintb (now we pass the buffer length
1399 to new routine). Changed code to use new function.
1401 * Added snprintf to sbr. Added configure check to build it
1402 if you don't have a native version (but haven't changed much
1403 code to use it yet).
1405 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1407 * Released nmh-0.18-pre1.
1409 * Fixed alarm bug in slocal, so that alarm is never
1410 called with a value larger than 30 mintues.
1412 * Fixed race condition in rmm and refile, so that
1413 context is updated before external rmmproc is called.
1415 * Removed all the OVERHEAD code.
1417 * Move code to add message to folder from refile.c
1420 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1422 * Did some rearranging of the internals of inc.c.
1424 * Make -inplace the default for anno, forw, dist, and repl.
1426 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1428 * Created new directory mts/sendmail for direct sendmail
1429 interface (although it currently still uses SMTP).
1431 * Removed all the TMA (trusted mail agent) code
1433 * Removed all the TTYD (terminal access daemon) code
1435 * Removed all the MF (uucp filtering) code.
1437 * Removed all the code for BERK.
1439 * Removed all the code for stand-alone delivery (MHMTS).
1441 * Split the file mts/sendmail/smail.c into sendmail.c and
1442 smtp.c. Changed the name of the directory to mts/smtp.
1444 * Changed autoconf to use @sysconfdir@ for location of
1445 configuration files.
1447 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1449 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1451 * Released nmh-0.17.
1453 * MAKEDEFS weren't passed down to recursive makes correctly.
1455 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1456 of hard-coding "/etc/utmp".
1458 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1461 * Remove configure checks for ulong and ushort. Changed
1462 code to just use unsigned {short, long}.
1464 * Change addmsg function in refile.c to return new
1465 number of refiled message.
1467 * Added check in get_returnpath for empty unixbuf.
1469 * Cleanup of sbr/pidstatus to use more POSIX macros
1470 for return value of wait().
1472 * Change configure to also check /bin for "more".
1474 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1476 * Released nmh-0.16.
1478 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1480 * Added automimeproc, which should replace automhnproc.
1482 * multipart messages will no longer abort for messages
1483 of type 8bit or binary (although we still can't really
1484 deal with binary messages, yet).
1486 * Fix double free of c_storage. From John MacMillan.
1488 * mhn now treats unknown subtypes of "text" as text/plain.
1490 * mhn changed so that specifying mhn-show-multipart, or
1491 mhn-show-multipart/{mixed, alternate, etc...) will override
1492 the use of the internal method for displaying these types.
1493 Previously mhn would always use the internal method for subtypes
1494 mixed, alternate, digest, and parallel (even if an alternate
1495 method was specified in mhn.defaults).
1497 * mhn show treats unknown subtypes of multipart, as type
1498 multipart/mixed (as specified RFC2046).
1500 * mhn checks for the parameter "name" rather than "x-name".
1501 From MH-6.8.4 patch.
1503 * Fix double free of ctinfo in user_content when using
1504 #forw with single message. From John MacMillan (and
1507 * Changed -mhnproc switch for show, to -showmimeproc.
1509 * Changed profile entry "mhnproc" to "showmimeproc".
1511 * Added "mime" option to "whatnow", which calls the program
1512 "buildmimeproc" (default is mhn -build) to process MIME
1515 * Added -build switch to mhn, to process MIME composition
1518 * Did some reorganizing of mhn.c.
1520 * Changed casting in mts/sendmail/smail.c from (char) to
1521 (signed char) so SMTP reply codes work correctly for machines
1522 which used unsigned chars by default.
1524 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1526 * Released nmh-0.15.
1528 * Added new form "scan.unseen" to distribution. It marks messages
1529 which are in any sequence in Unseen-Sequence.
1531 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1533 * Fix sign extension bugs in fmt_scan.c.
1535 * Fix m_atoi.c so that strings ending in non-digit characters
1538 * Split code in burst.c so that finding delimiters of digested
1539 messages and bursting a message into multiple messages are
1540 two separate functions (find_delim and burst).
1542 * Add workaround fo AC_PATH_PROG in configure.in, so
1543 that BSD4.4 machines can find sendmail, vi, more.
1545 * Added "-width" option to rcvtty.
1547 * Change a few variable names in zotnet/mts/client.c since
1548 they conflict with defines on AIX.
1550 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1551 unsuccessful if resulting file is less than 500 lines long
1552 (rather than 10, which was previous value), since AIX
1553 sed gives mangled file of about 200 lines.
1555 * Extract code in rcvstore.c to link message into folder,
1556 and put in own subroutine.
1558 * Extract code in refile.c to link message into folder,
1559 and put in own subroutine.
1561 * Moved code to remove messages from folder into own
1562 routine "folder_delmsgs" in sbr. Changed rmm.c and
1563 refile.c to use new routine.
1565 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1567 * Renamed m_seqok to seq_nameok.
1569 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1572 * Changed m_seqflag to return the number of a sequence rather
1573 than its bit flag. Changed its name to seq_getnum and renamed
1574 file to sbr/seq_getnum.c.
1576 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1579 * Added zero switch to m_seqadd function to zero out bits before
1580 adding message to sequence.
1582 * Renamed function m_setvis to m_setunseen, and renamed
1583 corresponding file in sbr.
1585 * Renamed function m_setseq to m_setprev, and renamed corresponding
1588 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1590 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1591 all selected messages from a sequence.
1593 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1594 selected messages to a sequence.
1596 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1599 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1601 * Renamed function pack_folder to m_packfolder, and moved it
1602 from uip/folder.c into its own file sbr/m_packfolder.c
1604 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1606 * Changed function m_gmsg to m_readfolder. Renamed file
1607 sbr/m_gmsg.c to sbr/m_readfolder.c.
1609 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1611 * Expanded rcvtty man page, and added small patch from
1612 MH-6.8.4 distribution.
1614 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1616 * Released nmh-0.14.
1618 * Comment out configure test and code for tgetent to allocate its
1619 own termcap buffer when passed a NULL argument.
1621 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1623 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1624 to show. Restructured code to handle options to various
1625 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1626 environment variable.
1628 * Added new man page `mh-draft' which documents the
1629 draft folder facility in nmh.
1631 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1634 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1635 fmtcompile.c to fmt_compile.c, and formataddr.c to
1638 * `send -help' wasn't showing the -(no)mime and -split
1641 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1643 * Released nmh-0.13.
1645 * Changed mhpath so it doesn't abort if a message sequence
1646 such as "mhpath all" expands to more than 1000 messages.
1647 Also mhpath now dynamically reallocated space for message
1648 names (The number of command line arguments is still limited
1651 * Did some general restructuring of the code in folder.c
1652 that checks for folder information, and prints it.
1654 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1656 * Changed `folder' to reallocate space for folder names if
1657 necessary. So `folders' can now handle more than 300 folders.
1659 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1661 * Change configure to use a compile check to see if the tm struct
1662 has tm_gmtoff, rather than using egrep.
1664 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1666 * Released nmh-0.12.
1668 * Had set_exists and unset_exists macros backwards.
1670 * Released nmh-0.11.
1672 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1674 * Added documentation to mh-profile.man about the various
1675 `procs' (mhlproc, showproc, lproc, etc...).
1677 * Replace the bit twiddling for SELECTED, UNSEEN, and
1678 mp->attrstats with macros.
1680 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1683 * Change fstat to stat in m_gmsg.c since Linux wants
1686 * Merge Linux patch sent in by Michel Oosterhof (original
1687 patch from bsa@kf8nh.wariat.org).
1689 * Document an undocumented MH feature. mhn -form mhl.null
1690 will suppress the display of the message header.
1692 * mhparam will now return "mhparam etcdir".
1694 * Add catproc to /config/config.c and use that in show.c
1695 and mshcmds.c, rather than hard coding in /bin/cat.
1697 * Add mhnproc to the list of `procs' in mh-profile.man.
1699 * Add configure test for lorder and tsort commands.
1701 * Commented out the padding in the `msgs` struct in h/mh.h
1703 * Change m_gmsg.c to allocate elements to the `info' array by
1704 500 elements at a time (rather than MAXFOLDERS / 5).
1706 * Add note to man page for mhmail that zero length messages are
1707 not sent. Need to use -body "" to send empty messages.
1709 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1711 * sbr/getcpy.c : assign '\0' to character, not NULL.
1713 * add m_fmsg to most programs in uip so that they explicitly free
1714 folder/message structure when done with folder.
1716 * uip/slocal.c : cleanup processing of sender. Make sure it is
1717 defined even if message is missing "From " line.
1719 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1721 * Released nmh-0.10.
1723 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1725 * Add configure check for <locale.h>. Turn on LOCALE support
1728 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1730 * Reversed previous decision to retain "From " lines in slocal.
1731 The "From " line is now removed from all messages.
1733 * inc now saves the date from the "From " envelope in the
1734 Delivery-Date header for all messages.
1736 * sbr/m_getfld.c: Clean up processing of Return-Path and
1737 Delivery-Date from the "From " envelope.
1739 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1741 * client.c: cast iaddr to int before comparing return value
1742 of inet_addr with NOTOK.
1744 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1746 * Grep test for signal names was failing on some OS'es because
1747 of missing tabs in regex.
1749 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1751 * Released nmh-0.09.
1753 * Move config files and format files to *.old before installing.
1755 * Add configure check for killpg.
1757 * msh.c: include <termios.h> instead of <termio.h> and
1760 * prompter.c: don't include <sys/ioctl.h> anymore.
1762 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1764 * Added `-mime' and `-nomime' options to `repl'.
1767 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1769 * ruserpass.c : removed conflicting prototypes.
1771 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1772 by `mesg' command. Previously only worked on BSD machines.
1774 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1776 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1777 than hard coded "/etc/utmp".
1779 * Released nmh-0.08.
1781 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1782 when accessing ndbm/db file for duplicate suppression, instead of
1783 locking database itself.
1785 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1787 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1789 * Changed the slocal actions `file' and `>' to always deliver in
1790 mbox (uucp) format rather than be determined by RPATHS config
1793 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1794 rather than mmdf format.
1796 * slocal now adds Delivery-Date field to all messages (previously it
1797 only added it to messages when delivering them to a file). The
1798 "From " line is now retained on all messages if compiling with
1799 RPATHS, rather than being discarded.
1801 * rcvpack no longer adds the Delivery-Date field to messages.
1803 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1805 * Removed the script packmbox, since it's functionality has been
1808 * Changed packf so that it uses mbox (uucp) format by default
1809 rather than mmdf format. Added options -mbox and -mmdf to
1810 packf so you can choose the preferred format.
1812 * Changed rcvpack so that it uses mbox (uucp) format by default
1813 rather than mmdf format. Added options -mbox and -mmdf to
1814 rcvpack so you can choose the preferred format.
1816 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1818 * Changed nmh to use dot locking by default (although you
1819 can still easily change this in config.h).
1821 * Simplified locking code. Removed code allowing setting of
1822 locking type in mts.conf. Now the locking type and locking
1823 directory (if any) can only be set at compile time.
1825 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1827 * Prefer getting timezone information from tm->gmtoff rather
1828 than tzset and external timezone variable.
1830 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1832 * Fixed typo in ruserpass.c in the variable toktabs.
1834 * When ruserpass was added to LIBOBJS, it was missing
1837 * Released nmh-0.07.
1839 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1841 * Add check to configure, so that if ruserpass, or _ruserpass
1842 is not found, build version of ruserpass in sbr.
1844 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1845 the code that manipulates internals of stdio, will build
1848 * Added #define to control whether to compile the simple
1849 built-in FTP client in mhn.
1851 * Added configure check for ushort and ulong. Change code
1852 to use ushort/ulong rather than u_short/u_long.
1854 * A couple of small cleanups in locking code.
1856 * Added configure check for gmtoff element in struct tm.
1858 * Added configure check for tzset.
1860 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1862 * Released nmh-0.06.
1864 * Removed code for machines that don't have socket
1865 interface (how could they get mail anyway?).
1867 * Removed code for BSD41 machines. I don't think there are
1868 many such machines around anymore.
1870 * Add configure check for function uname, and prefer it
1871 over gethostname. General cleanup of zotnet/mts/mts.c.
1873 * Change all `lseek' calls to use POSIX symbolic constants
1874 SEEK_SET, SEEK_CUR, SEEK_END.
1876 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1878 * Check lex generated file in zotnet/tws and use
1879 pre-generated version if necessary.
1881 * Released nmh-0.05.
1883 * Change to use reliable signals on all platforms that have
1884 sigaction. Change so that interrupted system calls are
1885 restarted for all signals except SIGALRM. This fixes alarm
1886 handling code in smail.c for BSD based systems.
1888 * Added lorder and tsort commands so that created libs can
1889 be linked in one pass.
1891 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1893 * Changed pidwait so that while it is waiting for a child,
1894 it should block signals rather than ignore them.
1896 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1898 * Add checks to configure for dbm_open and -lndbm.
1900 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1902 * folder -pop and folder -push were freeing some memory too
1903 quickly, which caused the entry popped from the stack to not
1904 become the current folder.
1906 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1908 * Released nmh-0.04.
1910 * Define ospeed and PC in termsbr.c is OS doesn't have
1913 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1915 * editfile will create a symbolic link to the altmsg if it
1916 can't make a link, on any machine supporting lstat. Formerly
1917 this would happen only on BSD42 based machines.
1919 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1921 * traverse (in popsbr.c) wasn't calling va_start before using
1922 variable argument list. Fixes core dump in inc when using POP.
1924 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1926 * The variable pass in remotemail needed to be set to
1927 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1930 * inc and msgchk were using -rpop by default when configured
1931 with POP support. Default is now -norpop.
1933 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1935 * By default, post will now give the SMTP HELO command with
1936 the local hostname. If you specify a hostname with the
1937 clientname: option in mts.conf file, post will give the
1938 HELO command with that name instead. If the argument to the
1939 clientname: option is empty, no HELO command is given.
1940 (From the MH-6.8.4 diff)
1942 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1944 * When using `-help' for a command, it will also print its
1945 profile compents from .mh_profile. (From MH-6.8.4 diff)
1947 * "slocal -file" will now correctly takes its input from
1948 a file (currently need to specify full path).
1950 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1952 * "slocal -debug" will now issue a warning if a non-blank
1953 line in the .maildelivery file has less than 5 fields.
1955 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1957 * Changed slocal so that code for duplicate suppression
1958 (MH config was MSGID) is always built. Added the options
1959 -[no]suppressdup to slocal to turn this on/off.
1961 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1963 * Released nmh-0.03.
1965 * Fixed problem where mark would core dump if no
1966 .mh_sequence file existed.
1968 * Fixed problem where slocal would core dump if -debug
1969 option was given, and certain headers were missing.
1971 * Added patch to slocal to add `folder' (+) action, which
1972 is shorthand for piping message to rcvstore. Updated
1975 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1977 * Changed flist option -unseen to -[no]all. Cleaned up
1980 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1982 * Fixed flist. Changed the profile component `Folder-Order'
1983 to `Flist-Order. Added option `-sequence' to flist, so
1984 you can specify the name of the sequence to search for.
1986 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1988 * A few minor portability cleanups. Changed to use PATH_MAX
1989 rather than MAXPATHLEN. Don't assume ospeed variable exists
1990 in termsbr.c. Removed some conflicting prototypes.
1992 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1994 * Add configure test to check if tgetent will accept NULL
1995 and allocate its own buffer. Borrowed from zsh.
1997 * Changed libpath to etcpath.
1999 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2001 * Cleaned up source code and Makefiles, so that if your `make'
2002 supports the VPATH option, you can build nmh in a different
2003 directory from where the source code is located.
2005 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2007 * Released nmh-0.02.
2009 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2011 * Split mhook man page into man pages for rcvdist, rcvpack,
2014 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2016 * Changed code to use strerror, rather than using sys_errlist
2017 and sys_nerr directly.
2019 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2021 * -compat switch from install-mh removed.
2023 * Changed the default POP port from "pop" to "pop3".
2025 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2027 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2028 (again) to mhn.defaults.sh. Changed find_program (again) to
2029 mhn.find.sh. mhn.defaults.sh now takes the search path
2030 as an argument. Default search path is now specified in Makefile
2031 rather than in script.
2033 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2035 * Changed mtstailor file to mts.conf. Updated man pages.
2037 * Changed si_value to si_val in mhn.c, since it conflicts with
2038 macro defined on Solaris.
2040 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2042 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2043 support for Emacs front-end mhe. It is on by default.
2045 * Added the following configure options: --enable-nmh-pop to
2046 enable client side pop support, --enable-nmh-smtp to enable
2047 SMTP support. Client-side pop support now compiles. Man
2048 pages for inc, msgchk, mh-chart now correctly added pop
2051 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2053 * Added configure test for bug in C libraries where linker
2054 can't find ruserpass, but can find _ruserpass.
2056 * Fixed configure test so that termcap variable ospeed is
2059 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2061 * Source files converted to ANSI C.
2063 * md5 now compiled separately rather than being included
2064 in mhn.c. Changed md5 to use memset and memcpy.
2066 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2068 * Collected the error routines adios, advise, admonish, and advertise
2069 into one file (error.c), and did some rearranging of the code.
2071 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2073 * Added awk script sigmsg.awk (originally written by
2074 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2075 automatically generate signal messages for pidstatus.c.
2076 Added files sbr/signals.c, h/signals.h. Code now uses
2077 sigprocmask to block signals (if available). Code now uses
2078 signal blocking on non-BSD machines.
2080 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2082 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2084 * Released nmh-0.01.
2086 * Added configure code to check for type of signals functions
2087 you have (POSIX or BSD style signals). Added function
2088 SIGPROCMASK to simulate sigprocmask on machines that don't
2091 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2093 * Added -version switch to all commands. Also added to
2096 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2098 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2099 POSIX termios.h style functions if present.
2101 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2103 * Changed support/general/bootmhn.sh to output new mhn_defaults
2104 file to standard output by default (makes it easier for testing).
2105 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2106 script to find_program.
2108 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2110 * Added patch to uip/folder.c from exmh distribution to
2111 speed up -recurse option.
2113 * Added flist command from exmh distribution. It doesn't work
2114 yet, but it compiles :-)
2116 * Changed default location for install to
2117 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2118 and configuration files go in nmh/etc, and support binaries go
2119 in nmh/lib. Of course, all this can now be changed in the top
2122 * Started with mh-6.8.3 as based and converted to autoconf.
2123 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2124 Pop support and plenty of other things, are now broken.
projects / mmh / blob