1 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
3 * If lockfile is present, and its dotlockfile program is setgid,
4 inc does not need to be setgid.
6 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
8 * Added autoconf test for Miquel van Smoorenburg's liblockfile
9 library, as found on Debian systems.
11 * Added liblockfile support to sbr/lock_file.c.
13 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
15 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
16 increase available memory. Took out %option noyywrap, which
17 wasn't understood by AT&T lex, as well as the -i
18 case-insensitivity flag.
20 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
22 * added a lint target to the Makefiles and a check in autoconf
23 to determine whether lint or lclint exists on the system.
25 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
27 * etc/Makefile.in was incorrectly installing mts.conf.in and
28 sendfiles.in -- fixed. Generated sendfiles script was not a
29 dependency of the `all' target, and was incorrectly included in
30 the distribution. Changed the suffix for the backed-up previous
31 versions of the etc files from the ambiguous .old to .prev. Added
32 call to diff -- only keep the .prev files around if different from
33 the newly-installed versions (intentionally didn't redirect output
34 to /dev/null so you'll notice when your changed versions are
37 * INSTALL never documented the etc/*.old thing. Documented the
38 new etc/*.prev thing (including a note to watch for diff output).
40 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
42 In the map_write routine, a call is made to map_open and this
43 call is supposed to set the "clear" variable to 0 or 1,
44 depending on whether the map file is empty or not. In
45 mh6.8.3, this worked because map_open would set "clear" by
46 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
47 was merged into mbx_open, but the interface for mbx_open
48 doesn't support the clear variable, so that functionality was
49 lost. The map_open interface still contains "int *clear" in
50 the prototype, but never sets it.
52 My patch eliminates "clear" from the map_open interface (I
53 checked to make sure that map_write is the only client of
54 map_open). Furthermore, my patch also sets the "clear"
55 variable properly at the beginning of map_write by calling
56 fstat(). This eliminates the bug in that the value of "clear"
57 being used later in the routine was just stack garbage.
59 Having a bad value of clear causes this next bug to be
60 triggered: The fp file pointer was being opened with fdopen,
61 but in two of the three switch cases it wasn't being closed.
62 In certain cases, this was causing packf to run out of file
63 descriptors if you attempted to pack a large folder.
65 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
67 * Moved the date parsing routines from zotnet/tws to sbr/ (and
68 tws.h to h/). Updated all source files to reflect to new location
71 * Rewrote dparsetime (dtimep.c) to replace the old
72 zotnet/tws/dtimep.c, lexstring.c, lexedit.c, and
73 dtimep.c-lexed. It should now work with flex (although untested
74 with lex), and requires no sed-ing. For now, I have the lexed
75 version in the distribution, so that end-users don't need to worry
76 about running it through flex/lex. I have not added back support
77 for guessing the time zone when it's not specified.
79 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
81 * Added autoconf check for getutent().
83 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
84 friends. Since I can only check on Linux, please check if
85 this works on other systems.
87 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
89 * Applied patch from Peter Maydell to uip/scansbr.c for more
90 checks for write failures.
92 * Unlink temporary file properly in uip/rcvtty.c.
94 * Moved viamail from bindir to libdir.
96 * Changed sendfiles into sendfiles.in, so that path to viamail
99 * Added gzip support to sendfiles.
101 * Added References header to replcomps and replgroupcomps.
103 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
105 * Fixed m_getfld bug which caused segmentation faults when
106 incorporating messages which ended in multiple linefeeds crossing
109 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
111 * msh has been unable to show MIME messages ever since 1.0. Alec
112 Wolman <wolman@cs.washington.edu> tracked down the problem to the
113 -show flag being passed to mhshow. mhshow is equivalent to the
114 old mhn -show, so we don't need the -show anymore. Removed it.
116 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
118 * zotnet/bboards is not longer built by default. Goal is to move
119 the assorted functions in zotnet into sbr or some more logical
122 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
123 as well as Makefiles.
125 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
127 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
128 seperately and redundantly defined, but so that OBJS is a
129 pattern-substituted version of SRCS with suffix .c -> .o. This
130 should make maintainability easier.
132 * Added section to MACHINES indicating what platforms nmh is known
133 to compile and work on, just to give users peace of mind, or
134 something. This is by no means complete or exhaustive, so add
135 whatever you know works.
137 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
139 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
140 enabled" line. If POP3 is the only kind of POP enabled, say so,
141 rather than just saying "yes" (which is ambiguous).
143 * Fixed four warnings in Shantonu's new getpass.c. Needed to
144 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
145 "h/mh.h" for adios(). Also changed ch from char to int to get rid
146 of "comparison is always 1 due to limited range of data type" on EOF.
148 * Added steps to README.developers saying to change the version
149 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
150 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
152 * Changed configure.in to use gcc -Wall even without
153 --enable-debug, to prevent developers compiling optimized from
154 introducing warnings, and to give end-users a warm, fuzzy feeling
155 as they (hopefully) see no warnings come out (except perhaps on
156 the lex output file) even with -Wall.
158 * Renamed getpass() to nmh_getpass() since the prototype for
159 getpass() varies from OS to OS, and we want to _always_ use our
160 version of the function. Fixed all the callers to use
161 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
162 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
163 and the memory leaked -- should have just been declared as static
164 char array. Prepended "Portions of this code are" to the
165 copyright message, as this version has been changed significantly
166 from the BSD version.
168 * Added "nmh-local functions to use in preference to OS versions"
169 section to README.developers (currently just says to use
170 nmh_getpass() instead of system getpass()).
172 * Prepended "Portions of this code are" to the copyright message
175 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
178 This happens on solaris:
181 windex entry incorrect: mts.conf(5) not found.
182 No manual entry for mts.conf.
186 % echo ".so man5/mh-tailor.5" > mts.conf.5
188 done in the man5 directory. We need to add 'mts.conf.5' as a
189 reference sourcing mh-tailor.5.
191 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
193 * Doug informed me that the way I had restored the "lost" version
194 histories was wrong, because `cvs checkout's of old versions of
195 nmh wouldn't work properly. It occurs to me that this could be
196 fixed by simply deleting those tags in the new-location *,v files,
197 but oh well. I'm putting everything back to the way Doug
198 originally had it. To get the old version history for a file that
199 used to be in the top directory, you'll need to "blindly" do a
200 `cvs log' there (even though you won't have a local copy of the
201 file in that directory). `cvs diff' will no longer be able to
202 diff pre-move versions vs. post-move versions -- you'll have to do
203 a lot of manual gyrations with `cvs checkout' and then use `diff'.
205 * I had alphabetized the --configure options in the --help output
206 awhile back, but Shantonu added --enable-apop just under
207 --enable-pop. Put it in alphabetical order and clarified what
208 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
209 --with-mts help line from "mail transport agent" to "mail
210 transport agent/service" so the 's' in "mts" doesn't seem to come
213 * Added two steps to "releasing nmh" in README.developers. After
214 making the tarball, it's a good idea to diff the tree vs. the CVS
215 tree to make sure no files got left out, and then to chown the
216 files so that they're owned by root, preventing a Trojaning attack
217 by a malicious remote user with a UID matching yours.
219 * Changed DIFFERENCES to say that RPOP is not currently supported
220 rather than implying it by saying that APOP, KPOP, and POP[3] are.
222 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
224 * Imported NetBSD version of getpass() and made extensive
225 revisions for compatibility with programs that pipe the password
226 to stdin, such as exmh.
228 * Removed tests for system ruserpass() which sometimes gave
229 phantom positive results. Also, bext to use internal functions if
230 we ever want to change .netrc format to something else, or access
233 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
235 * Restored lost version histories for those moved files by doing a
236 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
237 command so that you can move files (without having physical access
238 to the CVSROOT) without losing versioning. Put MACHINES back at
239 the top level as it needs to be read before building. Fixed DIST
240 variable in {.,docs}/Makefile.in to reflect that and to add
241 missing entry for "INSTALL" file.
243 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
245 * Re-cleaned up nmh documentation (by moving things to docs
246 subdir) and modified Makefile & configure.in to handle the change.
248 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
250 * Scott Blachowicz pointed out that the configure --help output
251 for --enable-masquerade was misleading. Clarified.
253 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
255 * APOP support can be compiled in to inc and msgchk using
258 * To access an APOP host, specify -apop on the command line
259 along with any -host or -user option.
261 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
263 * Upped the version number to 1.0.4+dev until the next nmh release.
265 * Added a "releasing nmh" section to README.developers, while the
266 process was fresh in my mind.
268 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
270 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
271 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
273 * Released nmh-1.0.4.
275 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
277 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
280 It appears that there shouldn't be quotes around the %s in the
281 iso-8859-1 charset entry; xterm passes the remaining arguments
282 to the program, quoting them means that xterm thinks they're
283 part of the program's name.
285 This %s isn't the same as the "Insert content subtype" one from
286 mhshow-show-* -- it doesn't come from MIME headers and is safe not
289 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
291 * added check in fmt_compile() to handle a single-character
292 format string. fmt_compile() depends on having an array of
293 format characters with an empty item at the end. A
294 single-character format would cause programs using this
295 function to segfault because the algorithm used to decide on
296 the length of the array mistakenly created a single-item array
297 when the format string was one character. This eventually
298 caused problems when the program attempted to test item+1
301 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
303 * Richard Coleman threw out a lot of old MH-specific files in nmh.
304 Much of the stuff, indeed, is not worth saving, but there are
305 nuggets that are very worthwhile, and should probably be added
306 back in. Most important, IMHO, are the MH change logs, as they
307 can help answer questions like "Why is this code like this?" or
308 "How long has this been broken?" or "What was this ever used for?"
310 I've added a new file to the nmh tree called
311 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
312 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
313 to go from newest at the top to oldest at the bottom to match the
314 ChangeLog convention. Unfortunately there are no change logs for
315 versions of MH prior to 3 in the MH tar files available at
316 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
317 are MH-6.6 changes that aren't documented in the logs.
319 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
320 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
321 and its "catman"-type output are a pain to deal with, but I was
322 loath to throw away the formatting, so I converted the file to
323 HTML. The only actual markup in the body are the "<B>" and "<U>"
324 tags, and "<" and ">" instead of '<' and '>', so it's quite
325 doable to view the file in plain ASCII mode as well. Note that
326 some of the changes this file documents as having been made in
327 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
328 and later put in certain 6.8.4 stuff.
330 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
332 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
333 fixing apparent bugs in Dan Winship's new security quoting code:
335 Since upgrading, I've been getting the following errors
336 while attempting to process some MIME messages:
338 (1) Syntax error: Unterminated quoted string
343 (2) line 1/10 (END)Segmentation fault (core dumped)
345 (2) appears to be due to the testing of an unset pointer in
346 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
347 mis-quoting a filename being handed to the shell in
348 mhshowsbr.c:show_content_aux().
350 Resolving the pointer reference issue in
351 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
352 problem in the routine.
354 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
356 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
357 prevent core dumping on packf. Here's the note from his message:
359 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
360 core on a file w/o a From line with a line >= BUFSIZ.
361 I noticed this because I had a junk file in my mail
364 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
366 * wesley.craig@umich.edu did not document his previous KPOP patch,
367 so I did so, and asked him to check what I wrote. Unfortunately
368 he didn't notice my misunderstanding of his patch. I wrote that
369 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
370 exclusively, but if you leave it as "pop3", you can use Wesley's
371 new -kpop switch on a given invocation. Instead, however, -kpop
372 turned out to be necessary on every invocation, and a KPOP user
373 complained. Applied Wesley's new patch, which makes things work
374 like I thought his original patch did. After that, did one more
375 clarifying pass to the documentation in inc.man and msgchk.man.
377 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
379 * When I fixed the long-standing makedir() bugs in January, I had
380 the code call strtoul(..., 0), which I believed to be safe as all
381 modes specified as ASCII constants in the nmh code started with a
382 leading zero (signifying octal), which I did as it would work if
383 internal constants were ever changed to hex. Unfortunately I was
384 unaware of the "Folder-Protect:" .mh_profile entry, which
385 mh-profile.man documents as an octal-only constant, with no
386 leading zero required. I've changed the strtoul() call to an
387 atooi() call and removed the misleading leading zeroes on the
388 ASCII octal constants in the code and man pages. Also changed the
389 "Folder-Protect:" example in the man page to something more
390 interesting than a duplication of the default.
392 * When I added my --enable-masquerade option, you'll note that I
393 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
394 options too wordy and I'm not sure why Richard went that route.
395 I've renamed them to just --enable-*, but the old versions will
396 still work as well (they just aren't advertised).
398 * Added a line to the "nmh configuration" output saying whether
401 * Added a new README.developers file. From the file:
403 This file is intended to provide a few tips for anyone doing
404 development on nmh. Developers who learn things "the hard
405 way" about the nmh codebase (as opposed to local info best
406 encoded in a comment) are encouraged to share their wisdom
409 Currently the topics are "autoconf files" and "directory structure".
411 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
413 * Applied, after some finessing,
414 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
416 Here's a patch that allows you to add
418 --with-smtpservers=<some.host.name>
420 to the ./configure command line to set the "servers: " line in
421 etc/mts.conf. Around here, we use "mailhost" so that all
422 machines in the current domain just talk to a central machine
423 and nothing else runs an MTA. Now, I can use
425 --with-smtpservers=mailhost
427 instead of having to remember to fix this by hand (and often
428 forgetting to do so!).
430 * Inspired by Simon's patch, added an --enable-masquerade option
431 to configure. It will set the "masquerade:" line of mts.conf.
432 You may specify a subset of the three types of masquerading, like
433 --enable-masquerade="draft_from mmailid", or leave off explicit
434 arguments to enable all three types.
436 * Alphabetized the --enable and --with options in configure.in and
437 INSTALL and added documentation of the two new options to the latter.
439 * Added new dependency for mts.conf: Makefile. If this isn't
440 done, then when you reconfigure nmh with new values for
441 --enable-masquerade or --with-smtpservers, you'll fail to get an
442 updated copy of mts.conf.
444 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
446 It seems that some MUA's didn't handle y2k very well - ELM
447 seems to be one of them, and Ultrix's DXmail (based on MH!).
448 I've got a few emails this month that look like:
450 575 Jan 00 Xxxxxx Xxxx 3603 ...
452 22+ Jan 00 Xxx Xxxxx 1771 ...
454 The first has "15 Jan 100" as the date and the second has
455 "19 Jan 00" as the date. The following works around this so
456 that scan, show, sortm, etc work ok.
458 I put Simon's patch under the control of a new #define called
459 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
460 acconfig.h about when you might not want to #define it.
462 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
463 lexed on Solaris 2.6. Added missing dependency in
464 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
466 * Added scan.MMDDYY and scan.YYYYMMDD format files.
468 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
470 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
472 With the patch below, you can add lines like:
474 mhshow-suffix-application/msword: .doc
475 mhshow-suffix-application/PostScript: .ps
477 to the mhn.defaults file to append the given suffix to a
478 scratch file. This allows applications which require a
479 certain suffix to run properly.
481 * Removed -force_html from lynx entry in mhn.defaults.sh (I
482 believe older versions of lynx lack that option) and added
483 "mhshow-suffix-text/html: .html".
485 * Modified username_extension masquerading to only use the
486 extended address on generated [Resent-]From: lines and SMTP
487 envelope From:. With Neil's original implementation, nmh's global
488 idea of the username was changed, which would result in inc lying
489 and saying you had no new mail because it was looking for a
490 mailbox called, for instance, "dan-nmh" (where username was "dan"
491 and $USERNAME_EXTENSION was "-nmh").
493 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
495 There's a wrap-around problem that affects the implementation
496 of Zeller's congruence in dtime.c. This causes the day-of-week
497 calculations to fail for dates after Feb 29, 2000 (probably up
498 until some year far in the future).
500 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
502 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
504 I finally tracked down the problem in msh that was causing
505 errors whenever I tried to examine a 'mmdf' style mailbox.
507 It turns out that not enough memory was being allocated with
508 calloc(), causing memory pointers to be overwritten and
511 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
513 * Changed the new "plussed_user" option to mts.conf's
514 "masquerade:" to "username_extension" after getting feedback from
515 qmail users, who use '-' as a separator rather than '+'. Removed
516 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
517 which needs to include the appropriate separator for your MTA
518 ('-', '+', or whatever) as its first character.
520 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
522 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
524 * Added a note to DIFFERENCES stating that it's out-of-date
525 (Richard was the last one to update it) and that we should
526 consider only documenting incompatibilities with MH there.
528 * Implemented (and documented) a third kind of username
529 masquerading: "plussed user" masquerading. This one was suggested
530 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
531 "plussed user" feature, where mail sent to <user>+<string> will be
532 delivered to <user>. When it's enabled, it's controlled by the
533 $USERPLUS environment variable. How is it enabled? Well, that
536 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
537 changed it so that rather than being a boolean, it can be set to
538 any combination of the three values "draft_from", "mmailid", and
539 "plussed_user". Thus it is now possible to enable the three types
540 of masquerading individually.
542 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
543 where if it was turned on, ','s would no longer be considered
544 GECOS field delimiters.
546 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
548 * Changed the GECOS-field '&' translation behavior to be
549 controlled by the BSD42 #define rather than GCOS_HACK, since it's
550 apparently always appropriate on OSes where BSD42 is #defined, and
551 never appropriate on any other OSes. Thanks to Kimmo Suominen for
552 responding to my "What is this code here for?" comment in mts.c
553 and explaining the feature.
555 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
557 * Upped the version number to 1.0.3+dev (ideally this should be
558 done by whoever makes a release tar file, immediately after doing
561 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
562 patch, posted to comp.mail.mh, which he says prevents loss of mail
563 when inc'ing into a full filesystem.
565 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
566 so that stamp-h.in will be different each time configure.in and
567 related files are changed, making it easier to check it in (which
568 is necessary to prevent unnecessary autoconf calls).
570 * My declaration of initgroups() in slocal.c to eliminate the "no
571 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
572 use AC_EGREP_HEADER to see where initgroups() is declared, if
575 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
577 * Fix security hole in mhshowsbr.c which allowed untrusted shell
580 * Released nmh 1.0.3.
582 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
584 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
585 be surrounded by single quotes, as a shell is not spawned when
586 just saving files, and the filenames will end up with literal
587 quotes embedded in them.
589 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
591 * Whoever originally added the -help switch to all the commands
592 got too cute and had the option itself print out as "-(help)" in
593 the -help output. One theory is that they were making reference
594 to the fact that clearly you know about the -help option since
595 you're currently looking at its output. I think it's a bad idea
596 to overload the meaning of the parentheses, however -- they're
597 supposed to indicate what abbreviated prefix of the switch you're
600 The other theory is that because you can say something like
601 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
602 by the same list of switches you get with -help, they were saying
603 you can "sorta" abbreviate "-help" as "-". You don't get the
604 "Usage:" string, though, so it's not really the same thing.
606 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
608 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
610 The following patch fixes a problem with requesting a
611 service key for a machine that has multiple 'A' records. It
612 also makes "-kpop" a command line option, for users who
613 would like to use both "kpop" and "pop".
615 Did no testing of the new features, as I don't have access to a
618 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
620 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
622 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
624 * All %-escapes in mhn.defaults that actually expand to something
625 should be surrounded by single quotes. Added quotes to the ones
626 in mhn.defaults.sh that were missing them.
628 * Added check for lynx to write mhshow-show-text/html line in
631 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
633 * makedir() had multiple bugs dating back to MH. An octal
634 constant was apparently being interpreted as decimal, resulting in
635 directories with no user read or execute permissions, making
636 nested directory creation fail. And there wasn't even an
637 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
638 in .mh_profile) on the outer directories of a nested directory.
640 * A second `make install' would always fail because the check for
641 whether mh_profile.5 existed was written incorrectly.
643 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
645 * Added documentation on both types of masquerading to post's man
648 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
650 * Doug's portability fix of my setgid inc autodetection had a
651 caching bug -- if you re-ran configure, uip/Makefile would be
652 corrupted, and installation would bomb out on OSes where inc needs
655 * Implemented a new kind of email address masquerading. Usually,
656 when a user writes a custom "From:" header in a draft, nmh uses it
657 rather than generating one. However, the user's true address is
658 used in the SMTP envelope "From:" and is revealed in the "Sender:"
659 header. Now, when mmailid is set to non-zero, the envelope
660 "From:" uses the address specified in the draft "From:" header,
661 and there is no "Sender:" header. This is useful when sending on
662 behalf of a remote POP3 account or when remote mail robots
663 incorrectly use the envelope "From:" in preference to the body
664 "From:". This processing has only been implemented for post, not
665 for the undocumented spost (which was already missing some "From:"
666 processing that post has).
668 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
670 * Got rid of the rest of the gcc -Wall warnings that I didn't have
671 time for on 1999-07-15 (and, it would seem, some new ones people
672 introduced since then). The primary ones were the warnings that
673 default prototypes were being used for [v]snprintf() and
674 str[n]casecmp(). As of right now, there are _no_ compilation
675 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
678 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
680 * Move mhtest from bindir to libdir.
682 * Move sendfiles from libdir to bindir.
684 * Updated sendfiles manpage to reflect this change.
686 * Added documentation for -build and -file switches to repl and
687 forw manpages (patch from Peter Maydell).
689 * Fixed interaction between specifying -cc in profile and -group on
692 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
694 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
695 not unanimous support for my proposed even/odd release/developer
696 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
699 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
701 * Upped the version number to 1.0.3. If we don't do this, then
702 when people report bugs against 1.0.2, we won't know "which" 1.0.2
703 they're talking about (since the development source is publically
704 available via CVS). I think the Linux kernel version numbers are
705 a good model, so the next time we roll a tarball, it should be
706 version 1.0.4 (or higher -- anyhow, an even-numbered version).
708 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
710 * Released nmh-1.0.2.
712 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
714 * Added check for whether "libtool" is in fact gnu libtool. If
715 it is, it is not used. This is the wrong behavior. If vendor
716 XYZ later on decides to create yet another libtool, we'll be
717 caught again. This works for now.
719 * Minor updates to MACHINES refering to Mac OS X.
721 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
723 * Added check for "libtool" (a ranlib type tool for Mac OS X)
724 and modified Makefiles so that nmh will build under Mac OS X.
726 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
728 * Changed repl defaults to partly revert to MH behaviour,
729 "-cc all" is now only implied with -group.
731 * The replcomps template includes cc: header again (as in MH).
733 * Updated repl man page to reflect these changes.
735 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
737 * Tweaked configure to handle Solaris and SunOS after the BIND
738 changes. Both need more cleanup.
740 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
742 * Removed BIND define and replaced it with a check for
743 gethostbyname (to determine if the host is DNS aware) and a
744 check for sethostent. This appears to be the right thing to
745 do, but there is no explanation of the reasoning behind the
746 BIND define in the code and it appears to have been used for
749 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
751 * Updated manpages Makefile to link mh-profile.5 to
752 mh_profile.5 after installation. Suggestion from Richard Cohen
753 <richard@jubjub.demon.co.uk>.
755 * Modified configure.in to check for _IO_write_ptr and libio.h
756 to determine whether to define LINUX_STDIO instead of using
759 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
761 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
762 multiple machines in the past where the mail spool was a symlink
763 to a directory on another device with more free space.
765 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
767 * Fixed a portability problem in Doug's fix of a portability
768 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
770 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
772 * Added config.sub and config.guess to the list of files to be
775 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
776 added if a list of addresses was split over several header lines.
778 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
779 macros, regardless of platform.
781 * Allow q to quit mhshow, and n to skip to next part. Patch from
782 Kimmo Suominen <kim@tac.nyc.ny.us>.
784 * Modified mhstore to recognize attachments created by sendfiles
785 with x-conversions=gzip.
787 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
789 * added explicit cast to long from time_t for tclock in
792 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
793 it's needed for ioctl() anyway. This prevents a warning about
794 implicit definition of ioctl().
796 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
797 "User Configuration" section of config.h (moved @TOP@ in
798 acconfig.h) so they're easier to find, should someone actually
799 want to mess with them.
801 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
803 * updated Makefile.in so it recognized COMPLETION-TCSH and
804 COMPLETION-ZSH (only used in make nmhdist).
806 * added prototype for ruserpas to <h/prototypes.h>. Fixes
807 warnings in mhparse.c and mhbuildsbr.c.
809 * added include checks for <time.h> and <sys/time.h> to
810 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
811 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
813 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
814 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
815 warnings about implicit definition of mts_init().
817 * added <grps.h> to slocal.c to prevent warnings about
820 * added <h/signals.h> to prevent warning about missing SIGNAL
823 * added function prototypes to smtp.c, whatnowproc.c,
824 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
827 * explicitly declared mbx_style in mshcmds.c and lused in
828 fmtdump.c as type static int instead of just static to
831 * various code cleanups to prevent ambiguous statements
832 (brackets for if/thens and parens for complicated if
836 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
838 * commented out _cleanup() in mf.c because it's the only
839 location in all of the source code where it exists. It was
840 preventing compilation on at least linux.
842 * Added check for <db1/ndbm.h> which is the new location where
843 linux systems appear to be stuffing this header file.
845 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
847 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
849 * added mh_profile SEGV patch from Richard Cohen
850 <richard@jubjub.demon.co.uk> that prevents crashing when
851 mh_profile doesn't end in a newline. A similar patch was
852 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
854 * fixed bug in associated with MAILGROUP #define (group "mail"
855 is not universal) -- hard to believe, but true.
857 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
859 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
861 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
863 * Automated #define of MAILGROUP and installation of inc as setgid mail
864 when the mail spool directory isn't world-writable.
866 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
868 * slocal -debug used to leave a file in /tmp for each message
869 processed. Very bad for folks with slocal -debug in their .forward!
871 * Got rid of a ton of compilation warnings. Most were "junk"
872 warnings due to the use of gcc -Wall (without -Wno-parentheses),
873 but a few represented real bugs. There remain many warnings to be
874 tackled that are due to missing function prototypes (e.g. snprintf()).
876 * Default rcvdistcomps no longer puts a copy of all outgoing
877 messages in outbox. Added an rcvdistcomps.outbox that does.
879 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
881 * Updated configure to check for mkstemp (available on OpenBSD) and
882 substitute it for mktemp if available.
884 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
886 * Added config.sub and config.guess and updated acconfig.h and
887 configure.in to automatically detect system type and set the
890 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
892 * Released nmh-1.0.1.
894 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
896 * Fixed flist to properly deal with relative folder names.
897 Problem noted by Jerry Peek <jpeek@jpeek.com>.
899 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
900 well as the Kerberos 5 compat libraries. Based on a patch from
901 Assar Westerlund <assar@sics.se>.
903 * Added a check in configure.in to test if modf is in libc and
904 link with libm if not. This is needed by at least Digital UNIX.
905 Problem pointed out by Kevin Oberman <oberman@es.net>.
907 * Fix a bug from the "mhn -show" to "mhshow" renaming that
908 made the "list" command in whatnow not work for some users.
909 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
911 * Replaced "extern int errno" with "#include <errno.h>" in a
912 number of files. Suggested by Stephen Wilson Bailey
915 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
916 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
918 * Fixed a segmentation fault in inc. Patch originally from Ruud de
919 Rooij <r.c.m.derooij@twi.tudelft.nl>.
921 * Allow display of 8bit encoded messages. From Kimmo Suominen
924 * Fixed repl to not add line breaks in the middle of long
925 addresses when building a reply. From Ruud de Rooij
926 <r.c.m.derooij@twi.tudelft.nl>.
928 * Added -library switch to spost so it can parse user aliases like
929 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
931 * Changed configure.in's check for sigsetjmp to properly deal
932 with systems like Linux where it is a macro. From
933 <elleron@servtech.com>.
935 * Fixed a bug in whatnow that could cause it to sometimes exit
936 without prompting the user. Based on a patch by Richard Geiger
939 * Added code to deal with SIGPIPE in mhl so it doesn't print
940 "Broken pipe" if you quit out of the moreproc.
942 * Documentation: Added a note to MACHINES about Irix make. Added a
943 pointer to the online copy of the MH book in INSTALL. Added
944 some additional information to the whatnow and packf man pages,
945 suggested by Jerry Peek <jpeek@jpeek.com>.
947 * Updated INSTALL, FAQ, etc to not refer to Richard as the
948 maintainer or math.gatech.edu as the home any more.
950 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
954 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
955 mbx_open so that the mode of zero length maildrops
956 would not be changed.
958 * Replaced the substitute version of snprintf() with the
959 one from the Apache web server.
961 * Changed to default mode for creating new messages to 0600
962 (this should have been done a long time ago).
964 * Changed "flist" to handle searching for multiple sequences
965 for each folder. Also flist will now correctly split
966 Unseen-Sequence if it consists of multiple sequences.
968 * Added new switches `-unlink' and `-nounlink' to "refile".
970 * Added new switches `-unlink' and `-nounlink' to "rmm".
972 * More cleanups of slocal output. Changed adorn() to
973 send to stdout, instead of stderr (to match rest of
976 * Merged mbx_create() into mbx_open, so that creating and
977 opening a nonexistent maildrop is done atomically. This
978 removes a bad race condition.
980 * Fixed bug that caused slocal to be unable to save to MMDF
983 * Added new wrapper function usr_folder() to slocal.c to
984 handle adding message to folder (currently, it still uses
985 usr_pipe() to call rcvstore).
987 * seq_list() checks for empty folder before scanning for
988 sequence information.
990 * num_digits() in flist.c and folder.c now returns correct
991 value for 0. Also added sanity check.
993 * folder_delmsgs() now correctly decrements internal message
996 * Don't attempt to read sequence information if folder
999 * Split seq_read into seq_public and seq_private.
1001 * Small change to sigmsg.awk, since newer versions of gawk
1002 interpret 034 as octal.
1004 * In flist, don't scan for sequence information in empty folder.
1006 * Updated mhn.defaults.sh to output profile entries for mhshow,
1007 mhstore, and mhbuild.
1009 * Changed configuration parameter "mhn-access-ftp" to
1010 "nmh-access-ftp". Updated man pages
1012 * Moved the code in InitMultipart to reverse the order of the
1013 parts in a multipart, into its own function "reverse_parts()".
1015 * Changed code in mhbuildsbr.c to store unencoded content
1016 in the c_cefile structure when building.
1018 * Changed code in mhoutsbr.c to look for unencoded content
1019 in the c_cefile structure when outputing message.
1021 * Changed configuration parameter "mhn-cache" and
1022 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1023 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1025 * Change configuration parameter "mhn-storage" to
1026 "nmh-storage", since it is now used in mhstore, mhlist,
1027 and mhshow. Updated man pages
1029 * Add autoconf support for KPOP (kerberized pop).
1031 * Add autoconf support for Hesiod.
1033 * Split routines to output a message given a Content structure
1034 (output_message, output_content, write7Bit, etc..) to a new
1037 * Split output_content(), into output_content() and build_headers().
1039 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1040 list of header fields, rather than reopening the message.
1042 * Added free_header() to mhfree.c to free structures containing
1043 header field information.
1045 * Changed get_content() to use the linked list of header fields
1046 when parsing the various MIME headers (Content-XXX).
1048 * Changed get_content() to store linked list of header field
1049 values when parsing a content.
1051 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1052 routines in mhcachesbr.c to handle the content cache.
1054 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1055 cache_content) into new file mhcachesbr.c.
1057 * More calls to sprintf/strcpy (primarily in mhparse.c
1058 and mhbuildsbr.c) converted to snprintf/strncpy.
1060 * When a message is displayed with `mhshow', it is now
1061 removed from the "unseen" sequence.
1063 * Change the default "showmimeproc" to "mhshow".
1065 * Split "mhn -show" off into separate command "mhshow".
1067 * Split "mhn -store" off into separate command "mhstore".
1069 * Split "mhn -list" off into separate command "mhlist".
1071 * Add sanity checks to context_find(), context_replace(),
1072 and context_del(), to abort if context file hasn't been
1075 * Add calls to context_read(), to the beginning of all nmh
1076 commands (instead of being called indirectly by context_find).
1078 * Changes the "substitute" version of vsnprintf/snprintf for
1079 operating systems without native versions, to just call the
1080 native vsprintf(), and ignore the buffer length. This is
1081 faster, but less secure than the previous version that used
1082 temporary files. This should only be a problem for systems
1083 which do not have a native snprintf(), and require `inc' to
1086 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1088 * Changes client() routine to take additional parameter, which is
1089 the buffer length of the parameter "response". Then added
1090 buffer length checks for this parameter.
1092 * Changed getws() to get_fields(), since that is apparently the
1093 name of a wide character version of gets() on some archetitures.
1095 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1097 * Change the code in most of the commands that take multiple
1098 message names/sequences/ranges on the command, such that
1099 the msgs array is expanded dynamically. This removes most
1100 of the limits on the length of command lines.
1102 * Add additional parameter to copyip(), to specify the
1103 maximum number of strings that can be copied (security
1106 * Create new function getarguments(), to massage the argument
1107 vector before parsing it (add any arguments from your
1108 profile to the beginning of the argument vector). This
1109 also removed the general limit on the number of command line
1112 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1114 * Released nmh-0.27.
1116 * Added a new command "delete", that is available during
1117 a "whatnow" session. It is equivalent to "quit -delete".
1119 * Added another parameter to editfile (in whatnowsbr.c),
1120 that controls whether editfile should remember the last
1121 program that was exec'ed. This way the whatnow command
1122 "mime", will not be re-executed if "edit" is later given
1125 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1126 mhbuild returns an error.
1128 * Added parameter to sendsbr(), so you may specify whether to
1129 rename the draft file.
1131 * Pass delay time to splitmsg() as a parameter, rather than
1132 use a global variable.
1134 * Moved code to rename draft file after sending message from
1135 splitmsg and sendaux, to sendsbr.
1137 * Removed all the code in viamail to split messages and then
1138 mail them. Replaced this with the standard sendsbr.c routines.
1140 * Changed sendsbr(), so that when splitting messages into
1141 messages of type "message/partial", the header fields that
1142 are copied are more compliant with RFC-2046.
1144 * Fixed mhbuild to track temporary files better. They are
1145 now correctly removed when mhbuild aborts.
1147 * Created a new man page for "sendfiles". The information
1148 about "mhn -viamail" in the "mhn" man page was moved to
1151 * Changed the name of the "viamail" shell script to
1152 "sendfiles". Modified "sendfiles" to use the new
1155 * Moved the functionality for "mhn -viamail" out of mhn,
1156 and into a separate executable called "viamail".
1158 * When storing MIME contents to a folder using mhn -store,
1159 they are now accumulated in a temporary file, and then added
1160 to the folder using folder_addmsg().
1162 * Moved code to save content to a folder from store_content
1163 to new function output_content_folder.
1165 * Moved code to save content to file from store_content to
1166 new function output_content_file.
1168 * Moved code to parse storage format string from store_content
1169 to new function parse_format_string.
1171 * Fix copy_some_headers() in mhstoresbr.c, so that the
1172 correct header fields in the first enclosing message/partial
1173 will be copied (according to RFC2046), when using mhn -store
1174 to reassemble messages of type message/partial.
1176 * Fixed bug to openFTP() in mhparse.c, that caused the
1177 tmp file to not be removed, when transferring a
1178 message/external file from ftp.
1180 * Moved the code in mhparse.c to process -auto switch (scan
1181 contents for the attribute "name"), to a new function
1182 "get_storeproc" in mhstoresbr.c.
1184 * Moved routines to free data structures related to MIME
1185 content from mhparse.c and mhbuildsbr.c, to new file
1188 * Moved code to show/display MIME content into new
1191 * Moved code to store MIME content from into
1192 new file mhstoresbr.c
1194 * Moved code to parse MIME content into new
1197 * Moved code to list information about MIME content
1198 into new file mhlistsbr.c.
1200 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1201 and set_endian() to new file mhmisc.c.
1203 * Start to isolate the code to show, list, and store MIME
1204 messages. One side effect is that only one flag (-show,
1205 -list, or -store) can be used at a time now.
1207 * mhn -store -auto wasn't storing file in correct directory.
1209 * Removed a few dead variables from sbr/ruserpass.c
1211 * move code for creating tmp files, and renaming the
1212 the composition draft in mhbuild, from build_mime()
1215 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1216 the -[no]auto switch (which isn't used in mhbuild).
1218 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1221 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1223 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1225 * Released nmh-0.26.
1227 * Added (unlisted) options [no]dashstuffing to send, post,
1228 and whatnow to determine whether to do RFC934 quoting
1229 (dashstuffing) for encapsulated BCC messages. The default
1230 is still the same (dashstuffing).
1232 * Changed the undocumented feature "nodashmunging" in forw
1233 and mhl, into the documented feature "nodashstuffing". The
1234 default for forw, is still "dashstuffing" for backward
1235 compatibility, although I don't believe that bursting
1236 RFC934 digests is very common anymore.
1238 * Added an option to define REALLYDUMB in the default config.h.
1239 But it is not on by default.
1241 * moved creation of config file mts.conf from zotnet/mts
1242 to etc. This simplified the Makefile in zotnet/mts.
1244 * simplified directory support/general to etc.
1246 * removed unneeded directory support/bboards.
1248 * split getusername() into getusername() and getuserinfo().
1250 * Changed getusr() routine to getusername().
1252 * Slight cleanup in folder_pack.c on code that records the new
1253 number of the "cur" message when packing.
1255 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1257 * Released nmh-0.25.
1259 * Change install process, so that hard linking the correct mts
1260 library to libmts.a, is not necessary. The final link process
1261 uses the original name of the library.
1263 * Fixed bug in flist.c and folder.c, so that symbolic links which
1264 point to directories, will not decrement the number of directory
1267 * Split the function list_content (in mhn.c and mhbuild.c) into
1268 list_content and list_debug.
1270 * Don't pack (folder -pack) an empty folder.
1272 * Exit gracefully in flist.c, if no sequence is specified,
1273 and no "Unseen-Sequence" is given in nmh profile.
1275 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1277 * Released nmh-0.24.
1279 * Small clarification to the man page for `ali'.
1281 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1282 are given, that order doesn't matter.
1284 * Fix bug in seq_list.c when realloc'ing for
1285 large sequence line.
1287 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1289 * Released nmh-0.23.
1291 * Add new section on "Transfer Encodings" to man page for mhbuild.
1293 * In mhbuild.c, split compose_content into compose_content
1294 (parse and execute composition string), and scan_content (scan
1295 content, decided transfer encoding, check for clash with boundary
1296 string). I did a good amount of rearranging of this code.
1298 * Moved definitions for data structures for parsing MIME
1299 messages from mhn.c and mhbuild.c to a new include
1302 * Small amount of rearranging in sendsbr.c
1304 * Small changes to MAIL.FILTERING file.
1306 * Add the file MAIL.FILTERING to nmh distribution.
1308 * Add line to packf so that if message begins with
1309 "X-Envelope-From:" field, it is converted to "From ".
1311 * Fix packf to add "From " line to beginning of message,
1312 even if Return-Path doesn't exist.
1314 * Add note to MACHINES file that on Linux, configure
1315 doesn't find the functions sigsetjmp/siglongjmp.
1317 * Fix configuration for machines that don't have (or find)
1318 sigsetjmp/siglongjmp.
1320 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1322 * Released nmh-0.22.
1324 * Add a configure check for sigsetjmp. Add some conditional
1325 #define's in h/signals.h in case it's not found.
1327 * Added additional notes about -auto switch in mhn man page.
1329 * Added note about MM_CHARSET environment variable to
1330 mh-profile(5) man page.
1332 * Fix signal problem in mhn.c (change setjmp/longjmp to
1333 sigsetjmp/siglongjmp).
1335 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1337 * Released nmh-0.22-pre1.
1339 * Changed the first line in mhl.format from
1340 " -- using template mhl.format -- " to a blank line.
1342 * Added note about automimeproc to mh-profile man page.
1344 * Reorganize the main entry point for parsing a MIME message
1345 or file in mhn. Add new function parse_file() as new main
1346 entry point for parsing MIME files.
1348 * Add note to mhn man page, that "mhn -file -" will accept the
1349 source message on the standard input.
1351 * Changed a sanity check in folder_realloc that was too strict.
1353 * -norfc934mode is now the default for mhbuild,
1354 rather than -rfc934mode.
1356 * Fix mhbuild, so that Content-Description and RFC-822 comments
1357 from #forw directive will be correctly included if there is
1360 * Change mhn to correctly default parts of multipart/digest to
1361 message/rfc822 (leftover code from rfc934mode was removed).
1363 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1366 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1368 * Released nmh-0.21.
1370 * If the file given to mhbuild is "-", then accept the draft on
1371 standard input, and output the MIME message to standard output.
1373 * Cleaned up code in mhbuild.c that decides what transfer
1376 * Cleaned up code in mhbuild.c that decides what character set
1377 to use for text contents.
1379 * Removed old hpux specific code from zotnet/tws/lexstring.c
1381 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1383 * Released nmh-0.21-pre2.
1385 * Added the "decode" variable to mhl.format and mhl.header.
1387 * Added new variable "decode" to mhlsbr.c to decode text in
1388 header fields as per RFC-2047.
1390 * Make sure that when decoding RFC-2047 header fields, that any
1391 spaces at the ends of the encoded text are not ignored, but the
1392 spaces between encoded word are.
1394 * Removed #ifdef's for MIME. MIME support is always compiled in.
1396 * scan/inc will now decode both Subject and From lines as
1397 RFC-2047 encoded header fields.
1399 * Added new function write_charset_8bit() to sbr. It returns
1400 the character set to use for 8bit text in composition draft.
1401 Changed mhbuild to use this function.
1403 * Split mhn man page into man pages for mhn and mhbuild.
1405 * mhn -show will only now only use default method for content
1406 of type plain, if it is NOT a part of a multipart/alternative.
1408 * Split mhn -build into mhbuild. Did some code cleanup.
1410 * Added support for %(decode) to fmtdump.c.
1412 * check_charset() now accepts US-ASCII as a subset of any
1413 ISO-8859-X character set.
1415 * Changed the default "showproc" to mhl, instead of the
1418 * When reading file into mhn composition file, only need read
1419 permissions, not write permissions.
1421 * Added own version of strcasecmp to distribution, since
1422 nmh calls it frequently with NULL pointers (ughh).
1424 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1427 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1429 * Released nmh-0.21-pre1.
1431 * If a message is missing charset parameter to text/plain, show
1432 will assume US-ASCII, rather than just calling showmimeproc.
1434 * Change show.c and mshcmds.c to use check_charset to see if text
1435 message contains valid character set.
1437 * Added new scan format file "scan.nomime" to support/general
1438 that doesn't do any RFC-2047 decoding.
1440 * Modified all the scan format files in support/general to do
1441 RFC-2047 decoding of Subject field.
1443 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1444 ignore whitespace between two valid encoded words, but not
1445 between an encoded word and normal text.
1447 * Created new file sbr/check_charset.c. Moved code from
1448 fmt_rfc2047.c to check for valid character set to this file.
1450 * Added format escape %(decode) to decode contents of "str" register
1451 as a RFC-2047 header field.
1453 * The command install-mh now recognizes the switches -version
1456 * Added a new argument to print_help.c to decide whether to
1457 print profile entries (needed for install-mh to prevent weird
1460 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1461 is initialize to max (mp->lowmsg, 1) rather than always 1.
1463 * Changed macros for sequence/attribute manipulation so that
1464 message status array doesn't need to always start at 1.
1466 * Small cleanups in folder_realloc().
1468 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1470 * Released nmh-0.20.
1472 * Added configure option --with-pager=PAGER.
1474 * Added configure option --with-editor=EDITOR.
1476 * Changed the default format file for mhl (mhl.format) to
1477 also ignore (not display) the header fields Content-Type,
1478 Content-Transfer-Encoding, and Content-ID
1480 * Fixed core dump in addrsbr.c when using %(proper) format function
1481 and the To: line was missing.
1483 * Added the file ZSH.COMPLETION to the distribution.
1485 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1487 * Released nmh-0.20-pre2.
1489 * Added new switch -snoop to both `msgchk' and `inc', so you can
1490 watch the POP transaction.
1492 * Changed "replgroupcomps" to check for Mail-Followup-To header
1493 first, and use it if available.
1495 * Changed "replcomps" to check for Mail-Reply-To header
1496 first, and use it if available.
1498 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1500 * Released nmh-0.20-pre1.
1502 * Changed seq_list.c to dynamically enlarge the buffer for
1503 collecting the message ranges in a long sequence line.
1504 This should remove the last hard limit on the size of a
1507 * Changed seq_read.c so that can read long sequence lines.
1508 It will use multiple calls to m_getfld() when m_getfld()
1509 returns the state FLDPLUS.
1511 * Changed brkstring.c to dynamically add more space for pointers
1512 if necessary. This is needed when splitting up large sequence
1515 * Did some small cleanups in seq_save.c.
1517 * Added new switches `-[no]unseen' to rcvstore, to control
1518 whether new messages are added to Unseen-Sequence.
1520 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1522 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1523 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1525 * Changed "replcomps" to not include CC and TO lines so that
1526 that reply message is only directed at the author of the
1527 message to which you are replying.
1529 * Added new switch `-group' to command repl, which causes repl
1530 to use new forms file "replgroupcomps". This is intended for
1531 making group replies.
1533 * Removed #ifdef for ATHENA.
1535 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1537 * Released nmh-0.19.
1539 * Fix repl,forw so that switch `-form file' will not abort
1540 as ambiguious (silly mistake on my part).
1542 * Cleaned up the mhn man page. Added info about a few escapes
1543 for the formatting/display strings that were not documented
1544 (%%, %t). Moved the BNF grammar for the mime composition file,
1545 to the end of the man page.
1547 * Added the options -[no]format to the command repl. The
1548 switch `-format' will filter the message to which you are
1549 replying with the standard message filter "mhl.reply", which
1550 is now included in the distribution. The `-noformat' option
1551 will negate the use of -format or -filter and not include
1552 the message to which you are replying in the draft.
1554 * Did some cleaning and reorganization on many of the man
1557 * Added debugging switch `-debug' to mhparam, which displays
1558 the values of all `procs' (and some other misc configuration
1559 info) that nmh keeps in global variables.
1561 * When using `refile -preserve', if a conflict occurs, then use
1562 the next available number above the message number you wish
1565 * In forw.c, split the code for creating MIME style forwarding
1566 out of copy_draft, and into copy_mime_draft.
1568 * Move routines in mark.c to print sequences, into new
1569 file sbr/seq_print.c
1571 * flist will now update the current folder.
1573 * Added the switches -[no]fast to flist, to replace
1574 -[no]total. The previous switches are still accepted
1575 but now undocumented.
1577 * More reorganization in flist of the code for
1580 * The command "flist +foo -all" will now scan the folder
1581 "foo" and all its 1st level children.
1583 * Add missing include file <h/mh.h> to sbr/snprintf.c
1585 * Fix alarm bug in rcvtty, so that when it calls external
1586 process, the alarm is never longer than 30 minutes.
1588 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1590 * Released nmh-0.18.
1592 * Fixed bug in mark, so that "mark -list -seq foo" will
1593 correctly indicate if "foo" is a private sequence. I found
1594 this bug mentioned in Jerry Peek's book.
1596 * Simplified the code in seq_setcur(), since seq_addmsg() now
1597 retains the public/private status of sequences.
1599 * Changed sequence handling so that if the switches -public
1600 or -nopublic, are not specified for the commands mark, pick,
1601 or rcvstore, then existing sequences will retain their
1602 previous public/private status.
1604 * mhparam now handles the mh-sequences profile entry
1607 * flist -all will now also check readonly folders (for
1610 * Improve the leaf optimization for folder command.
1611 It will now track the number of directories in a folder,
1612 and stop stat'ing files once it has hit all the subfolders.
1614 * Renamed m_getfolder to getfolder. Changed getfolder to
1615 take option to determine whether it should get current
1616 folder, or just default folder (Inbox). Changed rcvstore,
1617 inc, and rmf to use the new getfolder.
1619 * flist now indicates if a sequence is private.
1621 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1622 wait for stopped processes.
1624 * conflict will dynamically allocate space for group names,
1625 so it can now handle system with more than 100 groups.
1627 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1629 * Released nmh-0.18-pre4.
1631 * Check if we have enough message status space, before we
1632 call folder_realloc() in burst, mhpath, and m_draft().
1634 * mhn will now correctly identify a formatting string of "-"
1635 for the option -store, and send content to stdout.
1637 * Change the way that memory for message status is
1638 allocated. It is dynamcially allocated separately from
1639 the folder/message structure. This required changing
1640 folder_read.c, folder_realloc.c, folder_free.c.
1642 * Removed all the MTR code (experimental code for message
1645 * Renamed m_readfolder.c to folder_read.c and simplified
1648 * Renamed m_freefolder.c to folder_free.c.
1650 * Add function trim() to slocal.c to pretty print
1651 the debugging output.
1653 * Changed the name of m_packfolder() to folder_pack().
1654 Changed the name of m_remsg() to folder_realloc().
1656 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1658 * Released nmh-0.18-pre3.
1660 * Changed installation to add `flists' which is hard linked
1661 to `flist'. This is a equivalent to `flist -all'.
1663 * For flist, -showzero is on by default.
1665 * Major changes to flist. Default is now for flist to search
1666 current folder. The switch `-all' is now used to specify
1667 searching all top level folders. The new switch `-showzero'
1668 is used to print out folders that don't contain any messages
1669 in the given sequence.
1671 * Split BuildFolderList in flist.c into 2 functions
1672 (BuildFolderList, BuildFolderListR). Changed these functions
1673 so that flist now does better leaf optimization, and will stop
1674 stat'ing directory entries when it knows it has hit all the
1675 subdirectories of a given directory.
1677 * Reorganized code in folder.c, so that all relevant folders
1678 are scanned first and information recorded. Then all the
1679 folder summaries at printed out at one time.
1681 * Made the options of folder(s) more orthogonal. Now
1682 "folder -all -noheader -nototal" will do the right thing.
1684 * Added `-noall' switch to folder, for completeness.
1686 * Changed the default mode for creation of new folders
1689 * Slightly changed the format for flist. It now indicates
1690 if a folder is current. Also the width of the various
1691 fields are now calculated at runtime.
1693 * Changed the format for folder(s). Folder names
1694 are now left justified. The width of the various fields
1695 are calculated at runtime.
1697 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1699 * Released nmh-0.18-pre2.
1701 * Add paragraph to man page for install-mh and to INSTALL file
1702 about checking for global mh.profile.
1704 * Renamed m_find() to context_find().
1705 Renamed m_replace() to context_replace().
1706 Renamed m_delete() to context_del().
1707 Renamed m_update() to context_save().
1708 Renamed m_getdefs() to context_read().
1709 Renamed m_foil() to context_foil().
1711 * Change rcvstore to use routine folder_addmsg(), instead of
1712 adding message to folder itself.
1714 * Changed refile, so that if the switch -preserve is used,
1715 and a conflict occurs for a particular folder, then folder_addmsg()
1716 will just use next highest available number for that folder,
1719 * Make folder_addmsg() more robust. It will make repeated
1720 attempts to link file into folder if link returns with
1723 * Fix bug, so that that if forking sendmail, HELO will be sent
1724 unless clientname: option is defined but empty (so now it
1725 is the same as the direct smtp code).
1727 * Changed sprintb to snprintb (now we pass the buffer length
1728 to new routine). Changed code to use new function.
1730 * Added snprintf to sbr. Added configure check to build it
1731 if you don't have a native version (but haven't changed much
1732 code to use it yet).
1734 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1736 * Released nmh-0.18-pre1.
1738 * Fixed alarm bug in slocal, so that alarm is never
1739 called with a value larger than 30 mintues.
1741 * Fixed race condition in rmm and refile, so that
1742 context is updated before external rmmproc is called.
1744 * Removed all the OVERHEAD code.
1746 * Move code to add message to folder from refile.c
1749 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1751 * Did some rearranging of the internals of inc.c.
1753 * Make -inplace the default for anno, forw, dist, and repl.
1755 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1757 * Created new directory mts/sendmail for direct sendmail
1758 interface (although it currently still uses SMTP).
1760 * Removed all the TMA (trusted mail agent) code
1762 * Removed all the TTYD (terminal access daemon) code
1764 * Removed all the MF (uucp filtering) code.
1766 * Removed all the code for BERK.
1768 * Removed all the code for stand-alone delivery (MHMTS).
1770 * Split the file mts/sendmail/smail.c into sendmail.c and
1771 smtp.c. Changed the name of the directory to mts/smtp.
1773 * Changed autoconf to use @sysconfdir@ for location of
1774 configuration files.
1776 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1778 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1780 * Released nmh-0.17.
1782 * MAKEDEFS weren't passed down to recursive makes correctly.
1784 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1785 of hard-coding "/etc/utmp".
1787 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1790 * Remove configure checks for ulong and ushort. Changed
1791 code to just use unsigned {short, long}.
1793 * Change addmsg function in refile.c to return new
1794 number of refiled message.
1796 * Added check in get_returnpath for empty unixbuf.
1798 * Cleanup of sbr/pidstatus to use more POSIX macros
1799 for return value of wait().
1801 * Change configure to also check /bin for "more".
1803 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1805 * Released nmh-0.16.
1807 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1809 * Added automimeproc, which should replace automhnproc.
1811 * multipart messages will no longer abort for messages
1812 of type 8bit or binary (although we still can't really
1813 deal with binary messages, yet).
1815 * Fix double free of c_storage. From John MacMillan.
1817 * mhn now treats unknown subtypes of "text" as text/plain.
1819 * mhn changed so that specifying mhn-show-multipart, or
1820 mhn-show-multipart/{mixed, alternate, etc...) will override
1821 the use of the internal method for displaying these types.
1822 Previously mhn would always use the internal method for subtypes
1823 mixed, alternate, digest, and parallel (even if an alternate
1824 method was specified in mhn.defaults).
1826 * mhn show treats unknown subtypes of multipart, as type
1827 multipart/mixed (as specified RFC2046).
1829 * mhn checks for the parameter "name" rather than "x-name".
1830 From MH-6.8.4 patch.
1832 * Fix double free of ctinfo in user_content when using
1833 #forw with single message. From John MacMillan (and
1836 * Changed -mhnproc switch for show, to -showmimeproc.
1838 * Changed profile entry "mhnproc" to "showmimeproc".
1840 * Added "mime" option to "whatnow", which calls the program
1841 "buildmimeproc" (default is mhn -build) to process MIME
1844 * Added -build switch to mhn, to process MIME composition
1847 * Did some reorganizing of mhn.c.
1849 * Changed casting in mts/sendmail/smail.c from (char) to
1850 (signed char) so SMTP reply codes work correctly for machines
1851 which used unsigned chars by default.
1853 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1855 * Released nmh-0.15.
1857 * Added new form "scan.unseen" to distribution. It marks messages
1858 which are in any sequence in Unseen-Sequence.
1860 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1862 * Fix sign extension bugs in fmt_scan.c.
1864 * Fix m_atoi.c so that strings ending in non-digit characters
1867 * Split code in burst.c so that finding delimiters of digested
1868 messages and bursting a message into multiple messages are
1869 two separate functions (find_delim and burst).
1871 * Add workaround fo AC_PATH_PROG in configure.in, so
1872 that BSD4.4 machines can find sendmail, vi, more.
1874 * Added "-width" option to rcvtty.
1876 * Change a few variable names in zotnet/mts/client.c since
1877 they conflict with defines on AIX.
1879 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1880 unsuccessful if resulting file is less than 500 lines long
1881 (rather than 10, which was previous value), since AIX
1882 sed gives mangled file of about 200 lines.
1884 * Extract code in rcvstore.c to link message into folder,
1885 and put in own subroutine.
1887 * Extract code in refile.c to link message into folder,
1888 and put in own subroutine.
1890 * Moved code to remove messages from folder into own
1891 routine "folder_delmsgs" in sbr. Changed rmm.c and
1892 refile.c to use new routine.
1894 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1896 * Renamed m_seqok to seq_nameok.
1898 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1901 * Changed m_seqflag to return the number of a sequence rather
1902 than its bit flag. Changed its name to seq_getnum and renamed
1903 file to sbr/seq_getnum.c.
1905 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1908 * Added zero switch to m_seqadd function to zero out bits before
1909 adding message to sequence.
1911 * Renamed function m_setvis to m_setunseen, and renamed
1912 corresponding file in sbr.
1914 * Renamed function m_setseq to m_setprev, and renamed corresponding
1917 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1919 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1920 all selected messages from a sequence.
1922 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1923 selected messages to a sequence.
1925 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1928 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1930 * Renamed function pack_folder to m_packfolder, and moved it
1931 from uip/folder.c into its own file sbr/m_packfolder.c
1933 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1935 * Changed function m_gmsg to m_readfolder. Renamed file
1936 sbr/m_gmsg.c to sbr/m_readfolder.c.
1938 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1940 * Expanded rcvtty man page, and added small patch from
1941 MH-6.8.4 distribution.
1943 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1945 * Released nmh-0.14.
1947 * Comment out configure test and code for tgetent to allocate its
1948 own termcap buffer when passed a NULL argument.
1950 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1952 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1953 to show. Restructured code to handle options to various
1954 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1955 environment variable.
1957 * Added new man page `mh-draft' which documents the
1958 draft folder facility in nmh.
1960 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1963 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1964 fmtcompile.c to fmt_compile.c, and formataddr.c to
1967 * `send -help' wasn't showing the -(no)mime and -split
1970 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1972 * Released nmh-0.13.
1974 * Changed mhpath so it doesn't abort if a message sequence
1975 such as "mhpath all" expands to more than 1000 messages.
1976 Also mhpath now dynamically reallocated space for message
1977 names (The number of command line arguments is still limited
1980 * Did some general restructuring of the code in folder.c
1981 that checks for folder information, and prints it.
1983 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1985 * Changed `folder' to reallocate space for folder names if
1986 necessary. So `folders' can now handle more than 300 folders.
1988 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1990 * Change configure to use a compile check to see if the tm struct
1991 has tm_gmtoff, rather than using egrep.
1993 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1995 * Released nmh-0.12.
1997 * Had set_exists and unset_exists macros backwards.
1999 * Released nmh-0.11.
2001 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2003 * Added documentation to mh-profile.man about the various
2004 `procs' (mhlproc, showproc, lproc, etc...).
2006 * Replace the bit twiddling for SELECTED, UNSEEN, and
2007 mp->attrstats with macros.
2009 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2012 * Change fstat to stat in m_gmsg.c since Linux wants
2015 * Merge Linux patch sent in by Michel Oosterhof (original
2016 patch from bsa@kf8nh.wariat.org).
2018 * Document an undocumented MH feature. mhn -form mhl.null
2019 will suppress the display of the message header.
2021 * mhparam will now return "mhparam etcdir".
2023 * Add catproc to /config/config.c and use that in show.c
2024 and mshcmds.c, rather than hard coding in /bin/cat.
2026 * Add mhnproc to the list of `procs' in mh-profile.man.
2028 * Add configure test for lorder and tsort commands.
2030 * Commented out the padding in the `msgs` struct in h/mh.h
2032 * Change m_gmsg.c to allocate elements to the `info' array by
2033 500 elements at a time (rather than MAXFOLDERS / 5).
2035 * Add note to man page for mhmail that zero length messages are
2036 not sent. Need to use -body "" to send empty messages.
2038 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2040 * sbr/getcpy.c : assign '\0' to character, not NULL.
2042 * add m_fmsg to most programs in uip so that they explicitly free
2043 folder/message structure when done with folder.
2045 * uip/slocal.c : cleanup processing of sender. Make sure it is
2046 defined even if message is missing "From " line.
2048 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2050 * Released nmh-0.10.
2052 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2054 * Add configure check for <locale.h>. Turn on LOCALE support
2057 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2059 * Reversed previous decision to retain "From " lines in slocal.
2060 The "From " line is now removed from all messages.
2062 * inc now saves the date from the "From " envelope in the
2063 Delivery-Date header for all messages.
2065 * sbr/m_getfld.c: Clean up processing of Return-Path and
2066 Delivery-Date from the "From " envelope.
2068 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2070 * client.c: cast iaddr to int before comparing return value
2071 of inet_addr with NOTOK.
2073 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2075 * Grep test for signal names was failing on some OS'es because
2076 of missing tabs in regex.
2078 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2080 * Released nmh-0.09.
2082 * Move config files and format files to *.old before installing.
2084 * Add configure check for killpg.
2086 * msh.c: include <termios.h> instead of <termio.h> and
2089 * prompter.c: don't include <sys/ioctl.h> anymore.
2091 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2093 * Added `-mime' and `-nomime' options to `repl'.
2096 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2098 * ruserpass.c : removed conflicting prototypes.
2100 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2101 by `mesg' command. Previously only worked on BSD machines.
2103 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2105 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2106 than hard coded "/etc/utmp".
2108 * Released nmh-0.08.
2110 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2111 when accessing ndbm/db file for duplicate suppression, instead of
2112 locking database itself.
2114 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2116 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2118 * Changed the slocal actions `file' and `>' to always deliver in
2119 mbox (uucp) format rather than be determined by RPATHS config
2122 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2123 rather than mmdf format.
2125 * slocal now adds Delivery-Date field to all messages (previously it
2126 only added it to messages when delivering them to a file). The
2127 "From " line is now retained on all messages if compiling with
2128 RPATHS, rather than being discarded.
2130 * rcvpack no longer adds the Delivery-Date field to messages.
2132 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2134 * Removed the script packmbox, since it's functionality has been
2137 * Changed packf so that it uses mbox (uucp) format by default
2138 rather than mmdf format. Added options -mbox and -mmdf to
2139 packf so you can choose the preferred format.
2141 * Changed rcvpack so that it uses mbox (uucp) format by default
2142 rather than mmdf format. Added options -mbox and -mmdf to
2143 rcvpack so you can choose the preferred format.
2145 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2147 * Changed nmh to use dot locking by default (although you
2148 can still easily change this in config.h).
2150 * Simplified locking code. Removed code allowing setting of
2151 locking type in mts.conf. Now the locking type and locking
2152 directory (if any) can only be set at compile time.
2154 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2156 * Prefer getting timezone information from tm->gmtoff rather
2157 than tzset and external timezone variable.
2159 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2161 * Fixed typo in ruserpass.c in the variable toktabs.
2163 * When ruserpass was added to LIBOBJS, it was missing
2166 * Released nmh-0.07.
2168 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2170 * Add check to configure, so that if ruserpass, or _ruserpass
2171 is not found, build version of ruserpass in sbr.
2173 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2174 the code that manipulates internals of stdio, will build
2177 * Added #define to control whether to compile the simple
2178 built-in FTP client in mhn.
2180 * Added configure check for ushort and ulong. Change code
2181 to use ushort/ulong rather than u_short/u_long.
2183 * A couple of small cleanups in locking code.
2185 * Added configure check for gmtoff element in struct tm.
2187 * Added configure check for tzset.
2189 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2191 * Released nmh-0.06.
2193 * Removed code for machines that don't have socket
2194 interface (how could they get mail anyway?).
2196 * Removed code for BSD41 machines. I don't think there are
2197 many such machines around anymore.
2199 * Add configure check for function uname, and prefer it
2200 over gethostname. General cleanup of zotnet/mts/mts.c.
2202 * Change all `lseek' calls to use POSIX symbolic constants
2203 SEEK_SET, SEEK_CUR, SEEK_END.
2205 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2207 * Check lex generated file in zotnet/tws and use
2208 pre-generated version if necessary.
2210 * Released nmh-0.05.
2212 * Change to use reliable signals on all platforms that have
2213 sigaction. Change so that interrupted system calls are
2214 restarted for all signals except SIGALRM. This fixes alarm
2215 handling code in smail.c for BSD based systems.
2217 * Added lorder and tsort commands so that created libs can
2218 be linked in one pass.
2220 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2222 * Changed pidwait so that while it is waiting for a child,
2223 it should block signals rather than ignore them.
2225 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2227 * Add checks to configure for dbm_open and -lndbm.
2229 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2231 * folder -pop and folder -push were freeing some memory too
2232 quickly, which caused the entry popped from the stack to not
2233 become the current folder.
2235 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2237 * Released nmh-0.04.
2239 * Define ospeed and PC in termsbr.c is OS doesn't have
2242 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2244 * editfile will create a symbolic link to the altmsg if it
2245 can't make a link, on any machine supporting lstat. Formerly
2246 this would happen only on BSD42 based machines.
2248 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2250 * traverse (in popsbr.c) wasn't calling va_start before using
2251 variable argument list. Fixes core dump in inc when using POP.
2253 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2255 * The variable pass in remotemail needed to be set to
2256 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2259 * inc and msgchk were using -rpop by default when configured
2260 with POP support. Default is now -norpop.
2262 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2264 * By default, post will now give the SMTP HELO command with
2265 the local hostname. If you specify a hostname with the
2266 clientname: option in mts.conf file, post will give the
2267 HELO command with that name instead. If the argument to the
2268 clientname: option is empty, no HELO command is given.
2269 (From the MH-6.8.4 diff)
2271 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2273 * When using `-help' for a command, it will also print its
2274 profile compents from .mh_profile. (From MH-6.8.4 diff)
2276 * "slocal -file" will now correctly takes its input from
2277 a file (currently need to specify full path).
2279 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2281 * "slocal -debug" will now issue a warning if a non-blank
2282 line in the .maildelivery file has less than 5 fields.
2284 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2286 * Changed slocal so that code for duplicate suppression
2287 (MH config was MSGID) is always built. Added the options
2288 -[no]suppressdup to slocal to turn this on/off.
2290 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2292 * Released nmh-0.03.
2294 * Fixed problem where mark would core dump if no
2295 .mh_sequence file existed.
2297 * Fixed problem where slocal would core dump if -debug
2298 option was given, and certain headers were missing.
2300 * Added patch to slocal to add `folder' (+) action, which
2301 is shorthand for piping message to rcvstore. Updated
2304 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2306 * Changed flist option -unseen to -[no]all. Cleaned up
2309 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2311 * Fixed flist. Changed the profile component `Folder-Order'
2312 to `Flist-Order. Added option `-sequence' to flist, so
2313 you can specify the name of the sequence to search for.
2315 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2317 * A few minor portability cleanups. Changed to use PATH_MAX
2318 rather than MAXPATHLEN. Don't assume ospeed variable exists
2319 in termsbr.c. Removed some conflicting prototypes.
2321 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2323 * Add configure test to check if tgetent will accept NULL
2324 and allocate its own buffer. Borrowed from zsh.
2326 * Changed libpath to etcpath.
2328 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2330 * Cleaned up source code and Makefiles, so that if your `make'
2331 supports the VPATH option, you can build nmh in a different
2332 directory from where the source code is located.
2334 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2336 * Released nmh-0.02.
2338 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2340 * Split mhook man page into man pages for rcvdist, rcvpack,
2343 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2345 * Changed code to use strerror, rather than using sys_errlist
2346 and sys_nerr directly.
2348 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2350 * -compat switch from install-mh removed.
2352 * Changed the default POP port from "pop" to "pop3".
2354 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2356 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2357 (again) to mhn.defaults.sh. Changed find_program (again) to
2358 mhn.find.sh. mhn.defaults.sh now takes the search path
2359 as an argument. Default search path is now specified in Makefile
2360 rather than in script.
2362 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2364 * Changed mtstailor file to mts.conf. Updated man pages.
2366 * Changed si_value to si_val in mhn.c, since it conflicts with
2367 macro defined on Solaris.
2369 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2371 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2372 support for Emacs front-end mhe. It is on by default.
2374 * Added the following configure options: --enable-nmh-pop to
2375 enable client side pop support, --enable-nmh-smtp to enable
2376 SMTP support. Client-side pop support now compiles. Man
2377 pages for inc, msgchk, mh-chart now correctly added pop
2380 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2382 * Added configure test for bug in C libraries where linker
2383 can't find ruserpass, but can find _ruserpass.
2385 * Fixed configure test so that termcap variable ospeed is
2388 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2390 * Source files converted to ANSI C.
2392 * md5 now compiled separately rather than being included
2393 in mhn.c. Changed md5 to use memset and memcpy.
2395 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2397 * Collected the error routines adios, advise, admonish, and advertise
2398 into one file (error.c), and did some rearranging of the code.
2400 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2402 * Added awk script sigmsg.awk (originally written by
2403 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2404 automatically generate signal messages for pidstatus.c.
2405 Added files sbr/signals.c, h/signals.h. Code now uses
2406 sigprocmask to block signals (if available). Code now uses
2407 signal blocking on non-BSD machines.
2409 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2411 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2413 * Released nmh-0.01.
2415 * Added configure code to check for type of signals functions
2416 you have (POSIX or BSD style signals). Added function
2417 SIGPROCMASK to simulate sigprocmask on machines that don't
2420 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2422 * Added -version switch to all commands. Also added to
2425 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2427 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2428 POSIX termios.h style functions if present.
2430 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2432 * Changed support/general/bootmhn.sh to output new mhn_defaults
2433 file to standard output by default (makes it easier for testing).
2434 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2435 script to find_program.
2437 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2439 * Added patch to uip/folder.c from exmh distribution to
2440 speed up -recurse option.
2442 * Added flist command from exmh distribution. It doesn't work
2443 yet, but it compiles :-)
2445 * Changed default location for install to
2446 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2447 and configuration files go in nmh/etc, and support binaries go
2448 in nmh/lib. Of course, all this can now be changed in the top
2451 * Started with mh-6.8.3 as based and converted to autoconf.
2452 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2453 Pop support and plenty of other things, are now broken.