1 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
3 * Applied Todd Miller <Todd.Miller@courtesan.com>'s patch to
4 dropsbr.c to prevent core dumping on packf. Here's the note
7 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
8 core on a file w/o a From line with a line >= BUFSIZ.
9 I noticed this because I had a junk file in my mail
12 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
14 * wesley.craig@umich.edu did not document his previous KPOP patch,
15 so I did so, and asked him to check what I wrote. Unfortunately
16 he didn't notice my misunderstanding of his patch. I wrote that
17 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
18 exclusively, but if you leave it as "pop3", you can use Wesley's
19 new -kpop switch on a given invocation. Instead, however, -kpop
20 turned out to be necessary on every invocation, and a KPOP user
21 complained. Applied Wesley's new patch, which makes things work
22 like I thought his original patch did. After that, did one more
23 clarifying pass to the documentation in inc.man and msgchk.man.
25 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
27 * When I fixed the long-standing makedir() bugs in January, I had
28 the code call strtoul(..., 0), which I believed to be safe as all
29 modes specified as ASCII constants in the nmh code started with a
30 leading zero (signifying octal), which I did as it would work if
31 internal constants were ever changed to hex. Unfortunately I was
32 unaware of the "Folder-Protect:" .mh_profile entry, which
33 mh-profile.man documents as an octal-only constant, with no
34 leading zero required. I've changed the strtoul() call to an
35 atooi() call and removed the misleading leading zeroes on the
36 ASCII octal constants in the code and man pages. Also changed the
37 "Folder-Protect:" example in the man page to something more
38 interesting than a duplication of the default.
40 * When I added my --enable-masquerade option, you'll note that I
41 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
42 options too wordy and I'm not sure why Richard went that route.
43 I've renamed them to just --enable-*, but the old versions will
44 still work as well (they just aren't advertised).
46 * Added a line to the "nmh configuration" output saying whether
49 * Added a new README.developers file. From the file:
51 This file is intended to provide a few tips for anyone doing
52 development on nmh. Developers who learn things "the hard
53 way" about the nmh codebase (as opposed to local info best
54 encoded in a comment) are encouraged to share their wisdom
57 Currently the topics are "autoconf files" and "directory structure".
59 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
61 * Applied, after some finessing,
62 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
64 Here's a patch that allows you to add
66 --with-smtpservers=<some.host.name>
68 to the ./configure command line to set the "servers: " line in
69 etc/mts.conf. Around here, we use "mailhost" so that all
70 machines in the current domain just talk to a central machine
71 and nothing else runs an MTA. Now, I can use
73 --with-smtpservers=mailhost
75 instead of having to remember to fix this by hand (and often
76 forgetting to do so!).
78 * Inspired by Simon's patch, added an --enable-masquerade option
79 to configure. It will set the "masquerade:" line of mts.conf.
80 You may specify a subset of the three types of masquerading, like
81 --enable-masquerade="draft_from mmailid", or leave off explicit
82 arguments to enable all three types.
84 * Alphabetized the --enable and --with options in configure.in and
85 INSTALL and added documentation of the two new options to the latter.
87 * Added new dependency for mts.conf: Makefile. If this isn't
88 done, then when you reconfigure nmh with new values for
89 --enable-masquerade or --with-smtpservers, you'll fail to get an
90 updated copy of mts.conf.
92 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
94 It seems that some MUA's didn't handle y2k very well - ELM
95 seems to be one of them, and Ultrix's DXmail (based on MH!).
96 I've got a few emails this month that look like:
98 575 Jan 00 Xxxxxx Xxxx 3603 ...
100 22+ Jan 00 Xxx Xxxxx 1771 ...
102 The first has "15 Jan 100" as the date and the second has
103 "19 Jan 00" as the date. The following works around this so
104 that scan, show, sortm, etc work ok.
106 I put Simon's patch under the control of a new #define called
107 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
108 acconfig.h about when you might not want to #define it.
110 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
111 lexed on Solaris 2.6. Added missing dependency in
112 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
114 * Added scan.MMDDYY and scan.YYYYMMDD format files.
116 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
118 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
120 With the patch below, you can add lines like:
122 mhshow-suffix-application/msword: .doc
123 mhshow-suffix-application/PostScript: .ps
125 to the mhn.defaults file to append the given suffix to a
126 scratch file. This allows applications which require a
127 certain suffix to run properly.
129 * Removed -force_html from lynx entry in mhn.defaults.sh (I
130 believe older versions of lynx lack that option) and added
131 "mhshow-suffix-text/html: .html".
133 * Modified username_extension masquerading to only use the
134 extended address on generated [Resent-]From: lines and SMTP
135 envelope From:. With Neil's original implementation, nmh's global
136 idea of the username was changed, which would result in inc lying
137 and saying you had no new mail because it was looking for a
138 mailbox called, for instance, "dan-nmh" (where username was "dan"
139 and $USERNAME_EXTENSION was "-nmh").
141 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
143 There's a wrap-around problem that affects the implementation
144 of Zeller's congruence in dtime.c. This causes the day-of-week
145 calculations to fail for dates after Feb 29, 2000 (probably up
146 until some year far in the future).
148 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
150 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
152 I finally tracked down the problem in msh that was causing
153 errors whenever I tried to examine a 'mmdf' style mailbox.
155 It turns out that not enough memory was being allocated with
156 calloc(), causing memory pointers to be overwritten and
159 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
161 * Changed the new "plussed_user" option to mts.conf's
162 "masquerade:" to "username_extension" after getting feedback from
163 qmail users, who use '-' as a separator rather than '+'. Removed
164 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
165 which needs to include the appropriate separator for your MTA
166 ('-', '+', or whatever) as its first character.
168 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
170 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
172 * Added a note to DIFFERENCES stating that it's out-of-date
173 (Richard was the last one to update it) and that we should
174 consider only documenting incompatibilities with MH there.
176 * Implemented (and documented) a third kind of username
177 masquerading: "plussed user" masquerading. This one was suggested
178 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
179 "plussed user" feature, where mail sent to <user>+<string> will be
180 delivered to <user>. When it's enabled, it's controlled by the
181 $USERPLUS environment variable. How is it enabled? Well, that
184 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
185 changed it so that rather than being a boolean, it can be set to
186 any combination of the three values "draft_from", "mmailid", and
187 "plussed_user". Thus it is now possible to enable the three types
188 of masquerading individually.
190 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
191 where if it was turned on, ','s would no longer be considered
192 GECOS field delimiters.
194 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
196 * Changed the GECOS-field '&' translation behavior to be
197 controlled by the BSD42 #define rather than GCOS_HACK, since it's
198 apparently always appropriate on OSes where BSD42 is #defined, and
199 never appropriate on any other OSes. Thanks to Kimmo Suominen for
200 responding to my "What is this code here for?" comment in mts.c
201 and explaining the feature.
203 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
205 * Upped the version number to 1.0.3+dev (ideally this should be
206 done by whoever makes a release tar file, immediately after doing
209 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
210 patch, posted to comp.mail.mh, which he says prevents loss of mail
211 when inc'ing into a full filesystem.
213 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
214 so that stamp-h.in will be different each time configure.in and
215 related files are changed, making it easier to check it in (which
216 is necessary to prevent unnecessary autoconf calls).
218 * My declaration of initgroups() in slocal.c to eliminate the "no
219 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
220 use AC_EGREP_HEADER to see where initgroups() is declared, if
223 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
225 * Fix security hole in mhshowsbr.c which allowed untrusted shell
228 * Released nmh 1.0.3.
230 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
232 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
233 be surrounded by single quotes, as a shell is not spawned when
234 just saving files, and the filenames will end up with literal
235 quotes embedded in them.
237 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
239 * Whoever originally added the -help switch to all the commands
240 got too cute and had the option itself print out as "-(help)" in
241 the -help output. One theory is that they were making reference
242 to the fact that clearly you know about the -help option since
243 you're currently looking at its output. I think it's a bad idea
244 to overload the meaning of the parentheses, however -- they're
245 supposed to indicate what abbreviated prefix of the switch you're
248 The other theory is that because you can say something like
249 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
250 by the same list of switches you get with -help, they were saying
251 you can "sorta" abbreviate "-help" as "-". You don't get the
252 "Usage:" string, though, so it's not really the same thing.
254 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
256 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
258 The following patch fixes a problem with requesting a
259 service key for a machine that has multiple 'A' records. It
260 also makes "-kpop" a command line option, for users who
261 would like to use both "kpop" and "pop".
263 Did no testing of the new features, as I don't have access to a
266 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
268 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
270 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
272 * All %-escapes in mhn.defaults that actually expand to something
273 should be surrounded by single quotes. Added quotes to the ones
274 in mhn.defaults.sh that were missing them.
276 * Added check for lynx to write mhshow-show-text/html line in
279 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
281 * makedir() had multiple bugs dating back to MH. An octal
282 constant was apparently being interpreted as decimal, resulting in
283 directories with no user read or execute permissions, making
284 nested directory creation fail. And there wasn't even an
285 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
286 in .mh_profile) on the outer directories of a nested directory.
288 * A second `make install' would always fail because the check for
289 whether mh_profile.5 existed was written incorrectly.
291 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
293 * Added documentation on both types of masquerading to post's man
296 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
298 * Doug's portability fix of my setgid inc autodetection had a
299 caching bug -- if you re-ran configure, uip/Makefile would be
300 corrupted, and installation would bomb out on OSes where inc needs
303 * Implemented a new kind of email address masquerading. Usually,
304 when a user writes a custom "From:" header in a draft, nmh uses it
305 rather than generating one. However, the user's true address is
306 used in the SMTP envelope "From:" and is revealed in the "Sender:"
307 header. Now, when mmailid is set to non-zero, the envelope
308 "From:" uses the address specified in the draft "From:" header,
309 and there is no "Sender:" header. This is useful when sending on
310 behalf of a remote POP3 account or when remote mail robots
311 incorrectly use the envelope "From:" in preference to the body
312 "From:". This processing has only been implemented for post, not
313 for the undocumented spost (which was already missing some "From:"
314 processing that post has).
316 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
318 * Got rid of the rest of the gcc -Wall warnings that I didn't have
319 time for on 1999-07-15 (and, it would seem, some new ones people
320 introduced since then). The primary ones were the warnings that
321 default prototypes were being used for [v]snprintf() and
322 str[n]casecmp(). As of right now, there are _no_ compilation
323 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
326 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
328 * Move mhtest from bindir to libdir.
330 * Move sendfiles from libdir to bindir.
332 * Updated sendfiles manpage to reflect this change.
334 * Added documentation for -build and -file switches to repl and
335 forw manpages (patch from Peter Maydell).
337 * Fixed interaction between specifying -cc in profile and -group on
340 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
342 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
343 not unanimous support for my proposed even/odd release/developer
344 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
347 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
349 * Upped the version number to 1.0.3. If we don't do this, then
350 when people report bugs against 1.0.2, we won't know "which" 1.0.2
351 they're talking about (since the development source is publically
352 available via CVS). I think the Linux kernel version numbers are
353 a good model, so the next time we roll a tarball, it should be
354 version 1.0.4 (or higher -- anyhow, an even-numbered version).
356 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
358 * Released nmh-1.0.2.
360 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
362 * Added check for whether "libtool" is in fact gnu libtool. If
363 it is, it is not used. This is the wrong behavior. If vendor
364 XYZ later on decides to create yet another libtool, we'll be
365 caught again. This works for now.
367 * Minor updates to MACHINES refering to Mac OS X.
369 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
371 * Added check for "libtool" (a ranlib type tool for Mac OS X)
372 and modified Makefiles so that nmh will build under Mac OS X.
374 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
376 * Changed repl defaults to partly revert to MH behaviour,
377 "-cc all" is now only implied with -group.
379 * The replcomps template includes cc: header again (as in MH).
381 * Updated repl man page to reflect these changes.
383 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
385 * Tweaked configure to handle Solaris and SunOS after the BIND
386 changes. Both need more cleanup.
388 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
390 * Removed BIND define and replaced it with a check for
391 gethostbyname (to determine if the host is DNS aware) and a
392 check for sethostent. This appears to be the right thing to
393 do, but there is no explanation of the reasoning behind the
394 BIND define in the code and it appears to have been used for
397 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
399 * Updated manpages Makefile to link mh-profile.5 to
400 mh_profile.5 after installation. Suggestion from Richard Cohen
401 <richard@jubjub.demon.co.uk>.
403 * Modified configure.in to check for _IO_write_ptr and libio.h
404 to determine whether to define LINUX_STDIO instead of using
407 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
409 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
410 multiple machines in the past where the mail spool was a symlink
411 to a directory on another device with more free space.
413 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
415 * Fixed a portability problem in Doug's fix of a portability
416 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
418 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
420 * Added config.sub and config.guess to the list of files to be
423 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
424 added if a list of addresses was split over several header lines.
426 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
427 macros, regardless of platform.
429 * Allow q to quit mhshow, and n to skip to next part. Patch from
430 Kimmo Suominen <kim@tac.nyc.ny.us>.
432 * Modified mhstore to recognize attachments created by sendfiles
433 with x-conversions=gzip.
435 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
437 * added explicit cast to long from time_t for tclock in
440 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
441 it's needed for ioctl() anyway. This prevents a warning about
442 implicit definition of ioctl().
444 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
445 "User Configuration" section of config.h (moved @TOP@ in
446 acconfig.h) so they're easier to find, should someone actually
447 want to mess with them.
449 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
451 * updated Makefile.in so it recognized COMPLETION-TCSH and
452 COMPLETION-ZSH (only used in make nmhdist).
454 * added prototype for ruserpas to <h/prototypes.h>. Fixes
455 warnings in mhparse.c and mhbuildsbr.c.
457 * added include checks for <time.h> and <sys/time.h> to
458 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
459 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
461 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
462 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
463 warnings about implicit definition of mts_init().
465 * added <grps.h> to slocal.c to prevent warnings about
468 * added <h/signals.h> to prevent warning about missing SIGNAL
471 * added function prototypes to smtp.c, whatnowproc.c,
472 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
475 * explicitly declared mbx_style in mshcmds.c and lused in
476 fmtdump.c as type static int instead of just static to
479 * various code cleanups to prevent ambiguous statements
480 (brackets for if/thens and parens for complicated if
484 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
486 * commented out _cleanup() in mf.c because it's the only
487 location in all of the source code where it exists. It was
488 preventing compilation on at least linux.
490 * Added check for <db1/ndbm.h> which is the new location where
491 linux systems appear to be stuffing this header file.
493 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
495 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
497 * added mh_profile SEGV patch from Richard Cohen
498 <richard@jubjub.demon.co.uk> that prevents crashing when
499 mh_profile doesn't end in a newline. A similar patch was
500 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
502 * fixed bug in associated with MAILGROUP #define (group "mail"
503 is not universal) -- hard to believe, but true.
505 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
507 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
509 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
511 * Automated #define of MAILGROUP and installation of inc as setgid mail
512 when the mail spool directory isn't world-writable.
514 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
516 * slocal -debug used to leave a file in /tmp for each message
517 processed. Very bad for folks with slocal -debug in their .forward!
519 * Got rid of a ton of compilation warnings. Most were "junk"
520 warnings due to the use of gcc -Wall (without -Wno-parentheses),
521 but a few represented real bugs. There remain many warnings to be
522 tackled that are due to missing function prototypes (e.g. snprintf()).
524 * Default rcvdistcomps no longer puts a copy of all outgoing
525 messages in outbox. Added an rcvdistcomps.outbox that does.
527 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
529 * Updated configure to check for mkstemp (available on OpenBSD) and
530 substitute it for mktemp if available.
532 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
534 * Added config.sub and config.guess and updated acconfig.h and
535 configure.in to automatically detect system type and set the
538 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
540 * Released nmh-1.0.1.
542 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
544 * Fixed flist to properly deal with relative folder names.
545 Problem noted by Jerry Peek <jpeek@jpeek.com>.
547 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
548 well as the Kerberos 5 compat libraries. Based on a patch from
549 Assar Westerlund <assar@sics.se>.
551 * Added a check in configure.in to test if modf is in libc and
552 link with libm if not. This is needed by at least Digital UNIX.
553 Problem pointed out by Kevin Oberman <oberman@es.net>.
555 * Fix a bug from the "mhn -show" to "mhshow" renaming that
556 made the "list" command in whatnow not work for some users.
557 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
559 * Replaced "extern int errno" with "#include <errno.h>" in a
560 number of files. Suggested by Stephen Wilson Bailey
563 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
564 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
566 * Fixed a segmentation fault in inc. Patch originally from Ruud de
567 Rooij <r.c.m.derooij@twi.tudelft.nl>.
569 * Allow display of 8bit encoded messages. From Kimmo Suominen
572 * Fixed repl to not add line breaks in the middle of long
573 addresses when building a reply. From Ruud de Rooij
574 <r.c.m.derooij@twi.tudelft.nl>.
576 * Added -library switch to spost so it can parse user aliases like
577 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
579 * Changed configure.in's check for sigsetjmp to properly deal
580 with systems like Linux where it is a macro. From
581 <elleron@servtech.com>.
583 * Fixed a bug in whatnow that could cause it to sometimes exit
584 without prompting the user. Based on a patch by Richard Geiger
587 * Added code to deal with SIGPIPE in mhl so it doesn't print
588 "Broken pipe" if you quit out of the moreproc.
590 * Documentation: Added a note to MACHINES about Irix make. Added a
591 pointer to the online copy of the MH book in INSTALL. Added
592 some additional information to the whatnow and packf man pages,
593 suggested by Jerry Peek <jpeek@jpeek.com>.
595 * Updated INSTALL, FAQ, etc to not refer to Richard as the
596 maintainer or math.gatech.edu as the home any more.
598 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
602 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
603 mbx_open so that the mode of zero length maildrops
604 would not be changed.
606 * Replaced the substitute version of snprintf() with the
607 one from the Apache web server.
609 * Changed to default mode for creating new messages to 0600
610 (this should have been done a long time ago).
612 * Changed "flist" to handle searching for multiple sequences
613 for each folder. Also flist will now correctly split
614 Unseen-Sequence if it consists of multiple sequences.
616 * Added new switches `-unlink' and `-nounlink' to "refile".
618 * Added new switches `-unlink' and `-nounlink' to "rmm".
620 * More cleanups of slocal output. Changed adorn() to
621 send to stdout, instead of stderr (to match rest of
624 * Merged mbx_create() into mbx_open, so that creating and
625 opening a nonexistent maildrop is done atomically. This
626 removes a bad race condition.
628 * Fixed bug that caused slocal to be unable to save to MMDF
631 * Added new wrapper function usr_folder() to slocal.c to
632 handle adding message to folder (currently, it still uses
633 usr_pipe() to call rcvstore).
635 * seq_list() checks for empty folder before scanning for
636 sequence information.
638 * num_digits() in flist.c and folder.c now returns correct
639 value for 0. Also added sanity check.
641 * folder_delmsgs() now correctly decrements internal message
644 * Don't attempt to read sequence information if folder
647 * Split seq_read into seq_public and seq_private.
649 * Small change to sigmsg.awk, since newer versions of gawk
650 interpret 034 as octal.
652 * In flist, don't scan for sequence information in empty folder.
654 * Updated mhn.defaults.sh to output profile entries for mhshow,
655 mhstore, and mhbuild.
657 * Changed configuration parameter "mhn-access-ftp" to
658 "nmh-access-ftp". Updated man pages
660 * Moved the code in InitMultipart to reverse the order of the
661 parts in a multipart, into its own function "reverse_parts()".
663 * Changed code in mhbuildsbr.c to store unencoded content
664 in the c_cefile structure when building.
666 * Changed code in mhoutsbr.c to look for unencoded content
667 in the c_cefile structure when outputing message.
669 * Changed configuration parameter "mhn-cache" and
670 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
671 since it is used in mhstore, mhlist, and mhshow. Updated man pages
673 * Change configuration parameter "mhn-storage" to
674 "nmh-storage", since it is now used in mhstore, mhlist,
675 and mhshow. Updated man pages
677 * Add autoconf support for KPOP (kerberized pop).
679 * Add autoconf support for Hesiod.
681 * Split routines to output a message given a Content structure
682 (output_message, output_content, write7Bit, etc..) to a new
685 * Split output_content(), into output_content() and build_headers().
687 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
688 list of header fields, rather than reopening the message.
690 * Added free_header() to mhfree.c to free structures containing
691 header field information.
693 * Changed get_content() to use the linked list of header fields
694 when parsing the various MIME headers (Content-XXX).
696 * Changed get_content() to store linked list of header field
697 values when parsing a content.
699 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
700 routines in mhcachesbr.c to handle the content cache.
702 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
703 cache_content) into new file mhcachesbr.c.
705 * More calls to sprintf/strcpy (primarily in mhparse.c
706 and mhbuildsbr.c) converted to snprintf/strncpy.
708 * When a message is displayed with `mhshow', it is now
709 removed from the "unseen" sequence.
711 * Change the default "showmimeproc" to "mhshow".
713 * Split "mhn -show" off into separate command "mhshow".
715 * Split "mhn -store" off into separate command "mhstore".
717 * Split "mhn -list" off into separate command "mhlist".
719 * Add sanity checks to context_find(), context_replace(),
720 and context_del(), to abort if context file hasn't been
723 * Add calls to context_read(), to the beginning of all nmh
724 commands (instead of being called indirectly by context_find).
726 * Changes the "substitute" version of vsnprintf/snprintf for
727 operating systems without native versions, to just call the
728 native vsprintf(), and ignore the buffer length. This is
729 faster, but less secure than the previous version that used
730 temporary files. This should only be a problem for systems
731 which do not have a native snprintf(), and require `inc' to
734 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
736 * Changes client() routine to take additional parameter, which is
737 the buffer length of the parameter "response". Then added
738 buffer length checks for this parameter.
740 * Changed getws() to get_fields(), since that is apparently the
741 name of a wide character version of gets() on some archetitures.
743 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
745 * Change the code in most of the commands that take multiple
746 message names/sequences/ranges on the command, such that
747 the msgs array is expanded dynamically. This removes most
748 of the limits on the length of command lines.
750 * Add additional parameter to copyip(), to specify the
751 maximum number of strings that can be copied (security
754 * Create new function getarguments(), to massage the argument
755 vector before parsing it (add any arguments from your
756 profile to the beginning of the argument vector). This
757 also removed the general limit on the number of command line
760 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
764 * Added a new command "delete", that is available during
765 a "whatnow" session. It is equivalent to "quit -delete".
767 * Added another parameter to editfile (in whatnowsbr.c),
768 that controls whether editfile should remember the last
769 program that was exec'ed. This way the whatnow command
770 "mime", will not be re-executed if "edit" is later given
773 * Changed whatnowsbr.c, so that whatnow doesn't abort if
774 mhbuild returns an error.
776 * Added parameter to sendsbr(), so you may specify whether to
777 rename the draft file.
779 * Pass delay time to splitmsg() as a parameter, rather than
780 use a global variable.
782 * Moved code to rename draft file after sending message from
783 splitmsg and sendaux, to sendsbr.
785 * Removed all the code in viamail to split messages and then
786 mail them. Replaced this with the standard sendsbr.c routines.
788 * Changed sendsbr(), so that when splitting messages into
789 messages of type "message/partial", the header fields that
790 are copied are more compliant with RFC-2046.
792 * Fixed mhbuild to track temporary files better. They are
793 now correctly removed when mhbuild aborts.
795 * Created a new man page for "sendfiles". The information
796 about "mhn -viamail" in the "mhn" man page was moved to
799 * Changed the name of the "viamail" shell script to
800 "sendfiles". Modified "sendfiles" to use the new
803 * Moved the functionality for "mhn -viamail" out of mhn,
804 and into a separate executable called "viamail".
806 * When storing MIME contents to a folder using mhn -store,
807 they are now accumulated in a temporary file, and then added
808 to the folder using folder_addmsg().
810 * Moved code to save content to a folder from store_content
811 to new function output_content_folder.
813 * Moved code to save content to file from store_content to
814 new function output_content_file.
816 * Moved code to parse storage format string from store_content
817 to new function parse_format_string.
819 * Fix copy_some_headers() in mhstoresbr.c, so that the
820 correct header fields in the first enclosing message/partial
821 will be copied (according to RFC2046), when using mhn -store
822 to reassemble messages of type message/partial.
824 * Fixed bug to openFTP() in mhparse.c, that caused the
825 tmp file to not be removed, when transferring a
826 message/external file from ftp.
828 * Moved the code in mhparse.c to process -auto switch (scan
829 contents for the attribute "name"), to a new function
830 "get_storeproc" in mhstoresbr.c.
832 * Moved routines to free data structures related to MIME
833 content from mhparse.c and mhbuildsbr.c, to new file
836 * Moved code to show/display MIME content into new
839 * Moved code to store MIME content from into
840 new file mhstoresbr.c
842 * Moved code to parse MIME content into new
845 * Moved code to list information about MIME content
846 into new file mhlistsbr.c.
848 * Move part_ok(), type_ok(), content_error(), flush_errors(),
849 and set_endian() to new file mhmisc.c.
851 * Start to isolate the code to show, list, and store MIME
852 messages. One side effect is that only one flag (-show,
853 -list, or -store) can be used at a time now.
855 * mhn -store -auto wasn't storing file in correct directory.
857 * Removed a few dead variables from sbr/ruserpass.c
859 * move code for creating tmp files, and renaming the
860 the composition draft in mhbuild, from build_mime()
863 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
864 the -[no]auto switch (which isn't used in mhbuild).
866 * split mhn.c into mhn.c and mhnsbr.c (name later changed
869 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
871 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
875 * Added (unlisted) options [no]dashstuffing to send, post,
876 and whatnow to determine whether to do RFC934 quoting
877 (dashstuffing) for encapsulated BCC messages. The default
878 is still the same (dashstuffing).
880 * Changed the undocumented feature "nodashmunging" in forw
881 and mhl, into the documented feature "nodashstuffing". The
882 default for forw, is still "dashstuffing" for backward
883 compatibility, although I don't believe that bursting
884 RFC934 digests is very common anymore.
886 * Added an option to define REALLYDUMB in the default config.h.
887 But it is not on by default.
889 * moved creation of config file mts.conf from zotnet/mts
890 to etc. This simplified the Makefile in zotnet/mts.
892 * simplified directory support/general to etc.
894 * removed unneeded directory support/bboards.
896 * split getusername() into getusername() and getuserinfo().
898 * Changed getusr() routine to getusername().
900 * Slight cleanup in folder_pack.c on code that records the new
901 number of the "cur" message when packing.
903 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
907 * Change install process, so that hard linking the correct mts
908 library to libmts.a, is not necessary. The final link process
909 uses the original name of the library.
911 * Fixed bug in flist.c and folder.c, so that symbolic links which
912 point to directories, will not decrement the number of directory
915 * Split the function list_content (in mhn.c and mhbuild.c) into
916 list_content and list_debug.
918 * Don't pack (folder -pack) an empty folder.
920 * Exit gracefully in flist.c, if no sequence is specified,
921 and no "Unseen-Sequence" is given in nmh profile.
923 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
927 * Small clarification to the man page for `ali'.
929 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
930 are given, that order doesn't matter.
932 * Fix bug in seq_list.c when realloc'ing for
935 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
939 * Add new section on "Transfer Encodings" to man page for mhbuild.
941 * In mhbuild.c, split compose_content into compose_content
942 (parse and execute composition string), and scan_content (scan
943 content, decided transfer encoding, check for clash with boundary
944 string). I did a good amount of rearranging of this code.
946 * Moved definitions for data structures for parsing MIME
947 messages from mhn.c and mhbuild.c to a new include
950 * Small amount of rearranging in sendsbr.c
952 * Small changes to MAIL.FILTERING file.
954 * Add the file MAIL.FILTERING to nmh distribution.
956 * Add line to packf so that if message begins with
957 "X-Envelope-From:" field, it is converted to "From ".
959 * Fix packf to add "From " line to beginning of message,
960 even if Return-Path doesn't exist.
962 * Add note to MACHINES file that on Linux, configure
963 doesn't find the functions sigsetjmp/siglongjmp.
965 * Fix configuration for machines that don't have (or find)
966 sigsetjmp/siglongjmp.
968 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
972 * Add a configure check for sigsetjmp. Add some conditional
973 #define's in h/signals.h in case it's not found.
975 * Added additional notes about -auto switch in mhn man page.
977 * Added note about MM_CHARSET environment variable to
978 mh-profile(5) man page.
980 * Fix signal problem in mhn.c (change setjmp/longjmp to
981 sigsetjmp/siglongjmp).
983 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
985 * Released nmh-0.22-pre1.
987 * Changed the first line in mhl.format from
988 " -- using template mhl.format -- " to a blank line.
990 * Added note about automimeproc to mh-profile man page.
992 * Reorganize the main entry point for parsing a MIME message
993 or file in mhn. Add new function parse_file() as new main
994 entry point for parsing MIME files.
996 * Add note to mhn man page, that "mhn -file -" will accept the
997 source message on the standard input.
999 * Changed a sanity check in folder_realloc that was too strict.
1001 * -norfc934mode is now the default for mhbuild,
1002 rather than -rfc934mode.
1004 * Fix mhbuild, so that Content-Description and RFC-822 comments
1005 from #forw directive will be correctly included if there is
1008 * Change mhn to correctly default parts of multipart/digest to
1009 message/rfc822 (leftover code from rfc934mode was removed).
1011 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1014 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1016 * Released nmh-0.21.
1018 * If the file given to mhbuild is "-", then accept the draft on
1019 standard input, and output the MIME message to standard output.
1021 * Cleaned up code in mhbuild.c that decides what transfer
1024 * Cleaned up code in mhbuild.c that decides what character set
1025 to use for text contents.
1027 * Removed old hpux specific code from zotnet/tws/lexstring.c
1029 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1031 * Released nmh-0.21-pre2.
1033 * Added the "decode" variable to mhl.format and mhl.header.
1035 * Added new variable "decode" to mhlsbr.c to decode text in
1036 header fields as per RFC-2047.
1038 * Make sure that when decoding RFC-2047 header fields, that any
1039 spaces at the ends of the encoded text are not ignored, but the
1040 spaces between encoded word are.
1042 * Removed #ifdef's for MIME. MIME support is always compiled in.
1044 * scan/inc will now decode both Subject and From lines as
1045 RFC-2047 encoded header fields.
1047 * Added new function write_charset_8bit() to sbr. It returns
1048 the character set to use for 8bit text in composition draft.
1049 Changed mhbuild to use this function.
1051 * Split mhn man page into man pages for mhn and mhbuild.
1053 * mhn -show will only now only use default method for content
1054 of type plain, if it is NOT a part of a multipart/alternative.
1056 * Split mhn -build into mhbuild. Did some code cleanup.
1058 * Added support for %(decode) to fmtdump.c.
1060 * check_charset() now accepts US-ASCII as a subset of any
1061 ISO-8859-X character set.
1063 * Changed the default "showproc" to mhl, instead of the
1066 * When reading file into mhn composition file, only need read
1067 permissions, not write permissions.
1069 * Added own version of strcasecmp to distribution, since
1070 nmh calls it frequently with NULL pointers (ughh).
1072 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1075 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1077 * Released nmh-0.21-pre1.
1079 * If a message is missing charset parameter to text/plain, show
1080 will assume US-ASCII, rather than just calling showmimeproc.
1082 * Change show.c and mshcmds.c to use check_charset to see if text
1083 message contains valid character set.
1085 * Added new scan format file "scan.nomime" to support/general
1086 that doesn't do any RFC-2047 decoding.
1088 * Modified all the scan format files in support/general to do
1089 RFC-2047 decoding of Subject field.
1091 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1092 ignore whitespace between two valid encoded words, but not
1093 between an encoded word and normal text.
1095 * Created new file sbr/check_charset.c. Moved code from
1096 fmt_rfc2047.c to check for valid character set to this file.
1098 * Added format escape %(decode) to decode contents of "str" register
1099 as a RFC-2047 header field.
1101 * The command install-mh now recognizes the switches -version
1104 * Added a new argument to print_help.c to decide whether to
1105 print profile entries (needed for install-mh to prevent weird
1108 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1109 is initialize to max (mp->lowmsg, 1) rather than always 1.
1111 * Changed macros for sequence/attribute manipulation so that
1112 message status array doesn't need to always start at 1.
1114 * Small cleanups in folder_realloc().
1116 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1118 * Released nmh-0.20.
1120 * Added configure option --with-pager=PAGER.
1122 * Added configure option --with-editor=EDITOR.
1124 * Changed the default format file for mhl (mhl.format) to
1125 also ignore (not display) the header fields Content-Type,
1126 Content-Transfer-Encoding, and Content-ID
1128 * Fixed core dump in addrsbr.c when using %(proper) format function
1129 and the To: line was missing.
1131 * Added the file ZSH.COMPLETION to the distribution.
1133 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1135 * Released nmh-0.20-pre2.
1137 * Added new switch -snoop to both `msgchk' and `inc', so you can
1138 watch the POP transaction.
1140 * Changed "replgroupcomps" to check for Mail-Followup-To header
1141 first, and use it if available.
1143 * Changed "replcomps" to check for Mail-Reply-To header
1144 first, and use it if available.
1146 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1148 * Released nmh-0.20-pre1.
1150 * Changed seq_list.c to dynamically enlarge the buffer for
1151 collecting the message ranges in a long sequence line.
1152 This should remove the last hard limit on the size of a
1155 * Changed seq_read.c so that can read long sequence lines.
1156 It will use multiple calls to m_getfld() when m_getfld()
1157 returns the state FLDPLUS.
1159 * Changed brkstring.c to dynamically add more space for pointers
1160 if necessary. This is needed when splitting up large sequence
1163 * Did some small cleanups in seq_save.c.
1165 * Added new switches `-[no]unseen' to rcvstore, to control
1166 whether new messages are added to Unseen-Sequence.
1168 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1170 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1171 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1173 * Changed "replcomps" to not include CC and TO lines so that
1174 that reply message is only directed at the author of the
1175 message to which you are replying.
1177 * Added new switch `-group' to command repl, which causes repl
1178 to use new forms file "replgroupcomps". This is intended for
1179 making group replies.
1181 * Removed #ifdef for ATHENA.
1183 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1185 * Released nmh-0.19.
1187 * Fix repl,forw so that switch `-form file' will not abort
1188 as ambiguious (silly mistake on my part).
1190 * Cleaned up the mhn man page. Added info about a few escapes
1191 for the formatting/display strings that were not documented
1192 (%%, %t). Moved the BNF grammar for the mime composition file,
1193 to the end of the man page.
1195 * Added the options -[no]format to the command repl. The
1196 switch `-format' will filter the message to which you are
1197 replying with the standard message filter "mhl.reply", which
1198 is now included in the distribution. The `-noformat' option
1199 will negate the use of -format or -filter and not include
1200 the message to which you are replying in the draft.
1202 * Did some cleaning and reorganization on many of the man
1205 * Added debugging switch `-debug' to mhparam, which displays
1206 the values of all `procs' (and some other misc configuration
1207 info) that nmh keeps in global variables.
1209 * When using `refile -preserve', if a conflict occurs, then use
1210 the next available number above the message number you wish
1213 * In forw.c, split the code for creating MIME style forwarding
1214 out of copy_draft, and into copy_mime_draft.
1216 * Move routines in mark.c to print sequences, into new
1217 file sbr/seq_print.c
1219 * flist will now update the current folder.
1221 * Added the switches -[no]fast to flist, to replace
1222 -[no]total. The previous switches are still accepted
1223 but now undocumented.
1225 * More reorganization in flist of the code for
1228 * The command "flist +foo -all" will now scan the folder
1229 "foo" and all its 1st level children.
1231 * Add missing include file <h/mh.h> to sbr/snprintf.c
1233 * Fix alarm bug in rcvtty, so that when it calls external
1234 process, the alarm is never longer than 30 minutes.
1236 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1238 * Released nmh-0.18.
1240 * Fixed bug in mark, so that "mark -list -seq foo" will
1241 correctly indicate if "foo" is a private sequence. I found
1242 this bug mentioned in Jerry Peek's book.
1244 * Simplified the code in seq_setcur(), since seq_addmsg() now
1245 retains the public/private status of sequences.
1247 * Changed sequence handling so that if the switches -public
1248 or -nopublic, are not specified for the commands mark, pick,
1249 or rcvstore, then existing sequences will retain their
1250 previous public/private status.
1252 * mhparam now handles the mh-sequences profile entry
1255 * flist -all will now also check readonly folders (for
1258 * Improve the leaf optimization for folder command.
1259 It will now track the number of directories in a folder,
1260 and stop stat'ing files once it has hit all the subfolders.
1262 * Renamed m_getfolder to getfolder. Changed getfolder to
1263 take option to determine whether it should get current
1264 folder, or just default folder (Inbox). Changed rcvstore,
1265 inc, and rmf to use the new getfolder.
1267 * flist now indicates if a sequence is private.
1269 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1270 wait for stopped processes.
1272 * conflict will dynamically allocate space for group names,
1273 so it can now handle system with more than 100 groups.
1275 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1277 * Released nmh-0.18-pre4.
1279 * Check if we have enough message status space, before we
1280 call folder_realloc() in burst, mhpath, and m_draft().
1282 * mhn will now correctly identify a formatting string of "-"
1283 for the option -store, and send content to stdout.
1285 * Change the way that memory for message status is
1286 allocated. It is dynamcially allocated separately from
1287 the folder/message structure. This required changing
1288 folder_read.c, folder_realloc.c, folder_free.c.
1290 * Removed all the MTR code (experimental code for message
1293 * Renamed m_readfolder.c to folder_read.c and simplified
1296 * Renamed m_freefolder.c to folder_free.c.
1298 * Add function trim() to slocal.c to pretty print
1299 the debugging output.
1301 * Changed the name of m_packfolder() to folder_pack().
1302 Changed the name of m_remsg() to folder_realloc().
1304 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1306 * Released nmh-0.18-pre3.
1308 * Changed installation to add `flists' which is hard linked
1309 to `flist'. This is a equivalent to `flist -all'.
1311 * For flist, -showzero is on by default.
1313 * Major changes to flist. Default is now for flist to search
1314 current folder. The switch `-all' is now used to specify
1315 searching all top level folders. The new switch `-showzero'
1316 is used to print out folders that don't contain any messages
1317 in the given sequence.
1319 * Split BuildFolderList in flist.c into 2 functions
1320 (BuildFolderList, BuildFolderListR). Changed these functions
1321 so that flist now does better leaf optimization, and will stop
1322 stat'ing directory entries when it knows it has hit all the
1323 subdirectories of a given directory.
1325 * Reorganized code in folder.c, so that all relevant folders
1326 are scanned first and information recorded. Then all the
1327 folder summaries at printed out at one time.
1329 * Made the options of folder(s) more orthogonal. Now
1330 "folder -all -noheader -nototal" will do the right thing.
1332 * Added `-noall' switch to folder, for completeness.
1334 * Changed the default mode for creation of new folders
1337 * Slightly changed the format for flist. It now indicates
1338 if a folder is current. Also the width of the various
1339 fields are now calculated at runtime.
1341 * Changed the format for folder(s). Folder names
1342 are now left justified. The width of the various fields
1343 are calculated at runtime.
1345 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1347 * Released nmh-0.18-pre2.
1349 * Add paragraph to man page for install-mh and to INSTALL file
1350 about checking for global mh.profile.
1352 * Renamed m_find() to context_find().
1353 Renamed m_replace() to context_replace().
1354 Renamed m_delete() to context_del().
1355 Renamed m_update() to context_save().
1356 Renamed m_getdefs() to context_read().
1357 Renamed m_foil() to context_foil().
1359 * Change rcvstore to use routine folder_addmsg(), instead of
1360 adding message to folder itself.
1362 * Changed refile, so that if the switch -preserve is used,
1363 and a conflict occurs for a particular folder, then folder_addmsg()
1364 will just use next highest available number for that folder,
1367 * Make folder_addmsg() more robust. It will make repeated
1368 attempts to link file into folder if link returns with
1371 * Fix bug, so that that if forking sendmail, HELO will be sent
1372 unless clientname: option is defined but empty (so now it
1373 is the same as the direct smtp code).
1375 * Changed sprintb to snprintb (now we pass the buffer length
1376 to new routine). Changed code to use new function.
1378 * Added snprintf to sbr. Added configure check to build it
1379 if you don't have a native version (but haven't changed much
1380 code to use it yet).
1382 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1384 * Released nmh-0.18-pre1.
1386 * Fixed alarm bug in slocal, so that alarm is never
1387 called with a value larger than 30 mintues.
1389 * Fixed race condition in rmm and refile, so that
1390 context is updated before external rmmproc is called.
1392 * Removed all the OVERHEAD code.
1394 * Move code to add message to folder from refile.c
1397 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1399 * Did some rearranging of the internals of inc.c.
1401 * Make -inplace the default for anno, forw, dist, and repl.
1403 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1405 * Created new directory mts/sendmail for direct sendmail
1406 interface (although it currently still uses SMTP).
1408 * Removed all the TMA (trusted mail agent) code
1410 * Removed all the TTYD (terminal access daemon) code
1412 * Removed all the MF (uucp filtering) code.
1414 * Removed all the code for BERK.
1416 * Removed all the code for stand-alone delivery (MHMTS).
1418 * Split the file mts/sendmail/smail.c into sendmail.c and
1419 smtp.c. Changed the name of the directory to mts/smtp.
1421 * Changed autoconf to use @sysconfdir@ for location of
1422 configuration files.
1424 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1426 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1428 * Released nmh-0.17.
1430 * MAKEDEFS weren't passed down to recursive makes correctly.
1432 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1433 of hard-coding "/etc/utmp".
1435 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1438 * Remove configure checks for ulong and ushort. Changed
1439 code to just use unsigned {short, long}.
1441 * Change addmsg function in refile.c to return new
1442 number of refiled message.
1444 * Added check in get_returnpath for empty unixbuf.
1446 * Cleanup of sbr/pidstatus to use more POSIX macros
1447 for return value of wait().
1449 * Change configure to also check /bin for "more".
1451 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1453 * Released nmh-0.16.
1455 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1457 * Added automimeproc, which should replace automhnproc.
1459 * multipart messages will no longer abort for messages
1460 of type 8bit or binary (although we still can't really
1461 deal with binary messages, yet).
1463 * Fix double free of c_storage. From John MacMillan.
1465 * mhn now treats unknown subtypes of "text" as text/plain.
1467 * mhn changed so that specifying mhn-show-multipart, or
1468 mhn-show-multipart/{mixed, alternate, etc...) will override
1469 the use of the internal method for displaying these types.
1470 Previously mhn would always use the internal method for subtypes
1471 mixed, alternate, digest, and parallel (even if an alternate
1472 method was specified in mhn.defaults).
1474 * mhn show treats unknown subtypes of multipart, as type
1475 multipart/mixed (as specified RFC2046).
1477 * mhn checks for the parameter "name" rather than "x-name".
1478 From MH-6.8.4 patch.
1480 * Fix double free of ctinfo in user_content when using
1481 #forw with single message. From John MacMillan (and
1484 * Changed -mhnproc switch for show, to -showmimeproc.
1486 * Changed profile entry "mhnproc" to "showmimeproc".
1488 * Added "mime" option to "whatnow", which calls the program
1489 "buildmimeproc" (default is mhn -build) to process MIME
1492 * Added -build switch to mhn, to process MIME composition
1495 * Did some reorganizing of mhn.c.
1497 * Changed casting in mts/sendmail/smail.c from (char) to
1498 (signed char) so SMTP reply codes work correctly for machines
1499 which used unsigned chars by default.
1501 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1503 * Released nmh-0.15.
1505 * Added new form "scan.unseen" to distribution. It marks messages
1506 which are in any sequence in Unseen-Sequence.
1508 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1510 * Fix sign extension bugs in fmt_scan.c.
1512 * Fix m_atoi.c so that strings ending in non-digit characters
1515 * Split code in burst.c so that finding delimiters of digested
1516 messages and bursting a message into multiple messages are
1517 two separate functions (find_delim and burst).
1519 * Add workaround fo AC_PATH_PROG in configure.in, so
1520 that BSD4.4 machines can find sendmail, vi, more.
1522 * Added "-width" option to rcvtty.
1524 * Change a few variable names in zotnet/mts/client.c since
1525 they conflict with defines on AIX.
1527 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1528 unsuccessful if resulting file is less than 500 lines long
1529 (rather than 10, which was previous value), since AIX
1530 sed gives mangled file of about 200 lines.
1532 * Extract code in rcvstore.c to link message into folder,
1533 and put in own subroutine.
1535 * Extract code in refile.c to link message into folder,
1536 and put in own subroutine.
1538 * Moved code to remove messages from folder into own
1539 routine "folder_delmsgs" in sbr. Changed rmm.c and
1540 refile.c to use new routine.
1542 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1544 * Renamed m_seqok to seq_nameok.
1546 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1549 * Changed m_seqflag to return the number of a sequence rather
1550 than its bit flag. Changed its name to seq_getnum and renamed
1551 file to sbr/seq_getnum.c.
1553 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1556 * Added zero switch to m_seqadd function to zero out bits before
1557 adding message to sequence.
1559 * Renamed function m_setvis to m_setunseen, and renamed
1560 corresponding file in sbr.
1562 * Renamed function m_setseq to m_setprev, and renamed corresponding
1565 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1567 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1568 all selected messages from a sequence.
1570 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1571 selected messages to a sequence.
1573 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1576 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1578 * Renamed function pack_folder to m_packfolder, and moved it
1579 from uip/folder.c into its own file sbr/m_packfolder.c
1581 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1583 * Changed function m_gmsg to m_readfolder. Renamed file
1584 sbr/m_gmsg.c to sbr/m_readfolder.c.
1586 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1588 * Expanded rcvtty man page, and added small patch from
1589 MH-6.8.4 distribution.
1591 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1593 * Released nmh-0.14.
1595 * Comment out configure test and code for tgetent to allocate its
1596 own termcap buffer when passed a NULL argument.
1598 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1600 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1601 to show. Restructured code to handle options to various
1602 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1603 environment variable.
1605 * Added new man page `mh-draft' which documents the
1606 draft folder facility in nmh.
1608 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1611 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1612 fmtcompile.c to fmt_compile.c, and formataddr.c to
1615 * `send -help' wasn't showing the -(no)mime and -split
1618 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1620 * Released nmh-0.13.
1622 * Changed mhpath so it doesn't abort if a message sequence
1623 such as "mhpath all" expands to more than 1000 messages.
1624 Also mhpath now dynamically reallocated space for message
1625 names (The number of command line arguments is still limited
1628 * Did some general restructuring of the code in folder.c
1629 that checks for folder information, and prints it.
1631 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1633 * Changed `folder' to reallocate space for folder names if
1634 necessary. So `folders' can now handle more than 300 folders.
1636 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1638 * Change configure to use a compile check to see if the tm struct
1639 has tm_gmtoff, rather than using egrep.
1641 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1643 * Released nmh-0.12.
1645 * Had set_exists and unset_exists macros backwards.
1647 * Released nmh-0.11.
1649 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1651 * Added documentation to mh-profile.man about the various
1652 `procs' (mhlproc, showproc, lproc, etc...).
1654 * Replace the bit twiddling for SELECTED, UNSEEN, and
1655 mp->attrstats with macros.
1657 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1660 * Change fstat to stat in m_gmsg.c since Linux wants
1663 * Merge Linux patch sent in by Michel Oosterhof (original
1664 patch from bsa@kf8nh.wariat.org).
1666 * Document an undocumented MH feature. mhn -form mhl.null
1667 will suppress the display of the message header.
1669 * mhparam will now return "mhparam etcdir".
1671 * Add catproc to /config/config.c and use that in show.c
1672 and mshcmds.c, rather than hard coding in /bin/cat.
1674 * Add mhnproc to the list of `procs' in mh-profile.man.
1676 * Add configure test for lorder and tsort commands.
1678 * Commented out the padding in the `msgs` struct in h/mh.h
1680 * Change m_gmsg.c to allocate elements to the `info' array by
1681 500 elements at a time (rather than MAXFOLDERS / 5).
1683 * Add note to man page for mhmail that zero length messages are
1684 not sent. Need to use -body "" to send empty messages.
1686 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1688 * sbr/getcpy.c : assign '\0' to character, not NULL.
1690 * add m_fmsg to most programs in uip so that they explicitly free
1691 folder/message structure when done with folder.
1693 * uip/slocal.c : cleanup processing of sender. Make sure it is
1694 defined even if message is missing "From " line.
1696 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1698 * Released nmh-0.10.
1700 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1702 * Add configure check for <locale.h>. Turn on LOCALE support
1705 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1707 * Reversed previous decision to retain "From " lines in slocal.
1708 The "From " line is now removed from all messages.
1710 * inc now saves the date from the "From " envelope in the
1711 Delivery-Date header for all messages.
1713 * sbr/m_getfld.c: Clean up processing of Return-Path and
1714 Delivery-Date from the "From " envelope.
1716 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1718 * client.c: cast iaddr to int before comparing return value
1719 of inet_addr with NOTOK.
1721 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1723 * Grep test for signal names was failing on some OS'es because
1724 of missing tabs in regex.
1726 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1728 * Released nmh-0.09.
1730 * Move config files and format files to *.old before installing.
1732 * Add configure check for killpg.
1734 * msh.c: include <termios.h> instead of <termio.h> and
1737 * prompter.c: don't include <sys/ioctl.h> anymore.
1739 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1741 * Added `-mime' and `-nomime' options to `repl'.
1744 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1746 * ruserpass.c : removed conflicting prototypes.
1748 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1749 by `mesg' command. Previously only worked on BSD machines.
1751 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1753 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1754 than hard coded "/etc/utmp".
1756 * Released nmh-0.08.
1758 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1759 when accessing ndbm/db file for duplicate suppression, instead of
1760 locking database itself.
1762 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1764 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1766 * Changed the slocal actions `file' and `>' to always deliver in
1767 mbox (uucp) format rather than be determined by RPATHS config
1770 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1771 rather than mmdf format.
1773 * slocal now adds Delivery-Date field to all messages (previously it
1774 only added it to messages when delivering them to a file). The
1775 "From " line is now retained on all messages if compiling with
1776 RPATHS, rather than being discarded.
1778 * rcvpack no longer adds the Delivery-Date field to messages.
1780 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1782 * Removed the script packmbox, since it's functionality has been
1785 * Changed packf so that it uses mbox (uucp) format by default
1786 rather than mmdf format. Added options -mbox and -mmdf to
1787 packf so you can choose the preferred format.
1789 * Changed rcvpack so that it uses mbox (uucp) format by default
1790 rather than mmdf format. Added options -mbox and -mmdf to
1791 rcvpack so you can choose the preferred format.
1793 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1795 * Changed nmh to use dot locking by default (although you
1796 can still easily change this in config.h).
1798 * Simplified locking code. Removed code allowing setting of
1799 locking type in mts.conf. Now the locking type and locking
1800 directory (if any) can only be set at compile time.
1802 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1804 * Prefer getting timezone information from tm->gmtoff rather
1805 than tzset and external timezone variable.
1807 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1809 * Fixed typo in ruserpass.c in the variable toktabs.
1811 * When ruserpass was added to LIBOBJS, it was missing
1814 * Released nmh-0.07.
1816 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1818 * Add check to configure, so that if ruserpass, or _ruserpass
1819 is not found, build version of ruserpass in sbr.
1821 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1822 the code that manipulates internals of stdio, will build
1825 * Added #define to control whether to compile the simple
1826 built-in FTP client in mhn.
1828 * Added configure check for ushort and ulong. Change code
1829 to use ushort/ulong rather than u_short/u_long.
1831 * A couple of small cleanups in locking code.
1833 * Added configure check for gmtoff element in struct tm.
1835 * Added configure check for tzset.
1837 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1839 * Released nmh-0.06.
1841 * Removed code for machines that don't have socket
1842 interface (how could they get mail anyway?).
1844 * Removed code for BSD41 machines. I don't think there are
1845 many such machines around anymore.
1847 * Add configure check for function uname, and prefer it
1848 over gethostname. General cleanup of zotnet/mts/mts.c.
1850 * Change all `lseek' calls to use POSIX symbolic constants
1851 SEEK_SET, SEEK_CUR, SEEK_END.
1853 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1855 * Check lex generated file in zotnet/tws and use
1856 pre-generated version if necessary.
1858 * Released nmh-0.05.
1860 * Change to use reliable signals on all platforms that have
1861 sigaction. Change so that interrupted system calls are
1862 restarted for all signals except SIGALRM. This fixes alarm
1863 handling code in smail.c for BSD based systems.
1865 * Added lorder and tsort commands so that created libs can
1866 be linked in one pass.
1868 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1870 * Changed pidwait so that while it is waiting for a child,
1871 it should block signals rather than ignore them.
1873 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1875 * Add checks to configure for dbm_open and -lndbm.
1877 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1879 * folder -pop and folder -push were freeing some memory too
1880 quickly, which caused the entry popped from the stack to not
1881 become the current folder.
1883 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1885 * Released nmh-0.04.
1887 * Define ospeed and PC in termsbr.c is OS doesn't have
1890 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1892 * editfile will create a symbolic link to the altmsg if it
1893 can't make a link, on any machine supporting lstat. Formerly
1894 this would happen only on BSD42 based machines.
1896 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1898 * traverse (in popsbr.c) wasn't calling va_start before using
1899 variable argument list. Fixes core dump in inc when using POP.
1901 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1903 * The variable pass in remotemail needed to be set to
1904 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1907 * inc and msgchk were using -rpop by default when configured
1908 with POP support. Default is now -norpop.
1910 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1912 * By default, post will now give the SMTP HELO command with
1913 the local hostname. If you specify a hostname with the
1914 clientname: option in mts.conf file, post will give the
1915 HELO command with that name instead. If the argument to the
1916 clientname: option is empty, no HELO command is given.
1917 (From the MH-6.8.4 diff)
1919 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1921 * When using `-help' for a command, it will also print its
1922 profile compents from .mh_profile. (From MH-6.8.4 diff)
1924 * "slocal -file" will now correctly takes its input from
1925 a file (currently need to specify full path).
1927 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1929 * "slocal -debug" will now issue a warning if a non-blank
1930 line in the .maildelivery file has less than 5 fields.
1932 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1934 * Changed slocal so that code for duplicate suppression
1935 (MH config was MSGID) is always built. Added the options
1936 -[no]suppressdup to slocal to turn this on/off.
1938 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1940 * Released nmh-0.03.
1942 * Fixed problem where mark would core dump if no
1943 .mh_sequence file existed.
1945 * Fixed problem where slocal would core dump if -debug
1946 option was given, and certain headers were missing.
1948 * Added patch to slocal to add `folder' (+) action, which
1949 is shorthand for piping message to rcvstore. Updated
1952 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1954 * Changed flist option -unseen to -[no]all. Cleaned up
1957 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1959 * Fixed flist. Changed the profile component `Folder-Order'
1960 to `Flist-Order. Added option `-sequence' to flist, so
1961 you can specify the name of the sequence to search for.
1963 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1965 * A few minor portability cleanups. Changed to use PATH_MAX
1966 rather than MAXPATHLEN. Don't assume ospeed variable exists
1967 in termsbr.c. Removed some conflicting prototypes.
1969 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1971 * Add configure test to check if tgetent will accept NULL
1972 and allocate its own buffer. Borrowed from zsh.
1974 * Changed libpath to etcpath.
1976 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
1978 * Cleaned up source code and Makefiles, so that if your `make'
1979 supports the VPATH option, you can build nmh in a different
1980 directory from where the source code is located.
1982 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
1984 * Released nmh-0.02.
1986 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
1988 * Split mhook man page into man pages for rcvdist, rcvpack,
1991 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
1993 * Changed code to use strerror, rather than using sys_errlist
1994 and sys_nerr directly.
1996 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
1998 * -compat switch from install-mh removed.
2000 * Changed the default POP port from "pop" to "pop3".
2002 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2004 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2005 (again) to mhn.defaults.sh. Changed find_program (again) to
2006 mhn.find.sh. mhn.defaults.sh now takes the search path
2007 as an argument. Default search path is now specified in Makefile
2008 rather than in script.
2010 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2012 * Changed mtstailor file to mts.conf. Updated man pages.
2014 * Changed si_value to si_val in mhn.c, since it conflicts with
2015 macro defined on Solaris.
2017 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2019 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2020 support for Emacs front-end mhe. It is on by default.
2022 * Added the following configure options: --enable-nmh-pop to
2023 enable client side pop support, --enable-nmh-smtp to enable
2024 SMTP support. Client-side pop support now compiles. Man
2025 pages for inc, msgchk, mh-chart now correctly added pop
2028 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2030 * Added configure test for bug in C libraries where linker
2031 can't find ruserpass, but can find _ruserpass.
2033 * Fixed configure test so that termcap variable ospeed is
2036 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2038 * Source files converted to ANSI C.
2040 * md5 now compiled separately rather than being included
2041 in mhn.c. Changed md5 to use memset and memcpy.
2043 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2045 * Collected the error routines adios, advise, admonish, and advertise
2046 into one file (error.c), and did some rearranging of the code.
2048 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2050 * Added awk script sigmsg.awk (originally written by
2051 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2052 automatically generate signal messages for pidstatus.c.
2053 Added files sbr/signals.c, h/signals.h. Code now uses
2054 sigprocmask to block signals (if available). Code now uses
2055 signal blocking on non-BSD machines.
2057 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2059 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2061 * Released nmh-0.01.
2063 * Added configure code to check for type of signals functions
2064 you have (POSIX or BSD style signals). Added function
2065 SIGPROCMASK to simulate sigprocmask on machines that don't
2068 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2070 * Added -version switch to all commands. Also added to
2073 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2075 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2076 POSIX termios.h style functions if present.
2078 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2080 * Changed support/general/bootmhn.sh to output new mhn_defaults
2081 file to standard output by default (makes it easier for testing).
2082 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2083 script to find_program.
2085 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2087 * Added patch to uip/folder.c from exmh distribution to
2088 speed up -recurse option.
2090 * Added flist command from exmh distribution. It doesn't work
2091 yet, but it compiles :-)
2093 * Changed default location for install to
2094 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2095 and configuration files go in nmh/etc, and support binaries go
2096 in nmh/lib. Of course, all this can now be changed in the top
2099 * Started with mh-6.8.3 as based and converted to autoconf.
2100 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2101 Pop support and plenty of other things, are now broken.
projects / mmh / blob