1 Tue Jul 11 14:18:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * Clarified post.man and send.man for those not completely up on
4 SASL terminology. "SASL encryption layers are not supported for
5 SMTP" means that encryption is supported for the authentication
6 but not for the subsequent data stream.
8 Sat Jul 8 01:36:19 EDT 2000 Ken Hornstein <kenh@cmf.nrl.navy.mil>
10 * Added SASL support for IMAP, POP and SMTP. SASL encryption
11 layers are not supported over SMTP.
13 Sat Jun 10 18:37:59 CEST 2000 Ruud de Rooij <ruud@ruud.org>
15 * Merged mts/sendmail functionality into mts/smtp; switching between
16 smtp and sendmail delivery method is now controlled by mts.conf.
18 * If tsort cannot deal with loops, in addition to defining tsort as
19 cat, also define lorder as echo.
21 * Removed uip/popi.c from list of sources.
23 Thu Jun 08 19:36:57 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
25 * New dtimep.lex didn't parse day names properly. Fixed. Also
26 clarified ambiguous comments preceding day_map[] array (from old
27 dtimep.lex) that probably led to the erroneous cp++ being added.
29 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
31 * Added one more mkstemp invocation to uip/spost.c (which was in a
34 * Applied patch from Peter Maydell to clean up permissions handling
35 and error handling in uip/inc.c.
37 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
39 * Use cat instead of tsort if tsort cannot deal with loops in its
40 input (which is the case for tsort from GNU textutils).
42 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
44 * If lockfile is present, and its dotlockfile program is setgid,
45 inc does not need to be setgid.
47 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
49 * Added autoconf test for Miquel van Smoorenburg's liblockfile
50 library, as found on Debian systems.
52 * Added liblockfile support to sbr/lock_file.c.
54 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
56 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
57 increase available memory. Took out %option noyywrap, which
58 wasn't understood by AT&T lex, as well as the -i
59 case-insensitivity flag.
61 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
63 * Added a lint target to the Makefiles and a check in autoconf
64 to determine whether lint or lclint exists on the system.
66 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
68 * etc/Makefile.in was incorrectly installing mts.conf.in and
69 sendfiles.in -- fixed. Generated sendfiles script was not a
70 dependency of the `all' target, and was incorrectly included in
71 the distribution. Changed the suffix for the backed-up previous
72 versions of the etc files from the ambiguous .old to .prev. Added
73 call to diff -- only keep the .prev files around if different from
74 the newly-installed versions (intentionally didn't redirect output
75 to /dev/null so you'll notice when your changed versions are
78 * INSTALL never documented the etc/*.old thing. Documented the
79 new etc/*.prev thing (including a note to watch for diff output).
81 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
83 In the map_write routine, a call is made to map_open and this
84 call is supposed to set the "clear" variable to 0 or 1,
85 depending on whether the map file is empty or not. In
86 mh6.8.3, this worked because map_open would set "clear" by
87 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
88 was merged into mbx_open, but the interface for mbx_open
89 doesn't support the clear variable, so that functionality was
90 lost. The map_open interface still contains "int *clear" in
91 the prototype, but never sets it.
93 My patch eliminates "clear" from the map_open interface (I
94 checked to make sure that map_write is the only client of
95 map_open). Furthermore, my patch also sets the "clear"
96 variable properly at the beginning of map_write by calling
97 fstat(). This eliminates the bug in that the value of "clear"
98 being used later in the routine was just stack garbage.
100 Having a bad value of clear causes this next bug to be
101 triggered: The fp file pointer was being opened with fdopen,
102 but in two of the three switch cases it wasn't being closed.
103 In certain cases, this was causing packf to run out of file
104 descriptors if you attempted to pack a large folder.
106 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
108 * Moved the date parsing routines from zotnet/tws to sbr/ (and
109 tws.h to h/). Updated all source files to reflect to new location
112 * Rewrote dparsetime (in dtimep.lex -> dtimep.c) to replace the
113 old zotnet/tws/dtimep.c, dtimep.lex, lexstring.c, lexedit.c, and
114 dtimep.c-lexed. It should now work with flex (although untested
115 with lex), and requires no sed-ing. For now, I have the lexed
116 version in the distribution, so that end-users don't need to worry
117 about running it through flex/lex. I have not added back support
118 for guessing the time zone when it's not specified.
120 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
122 * Added autoconf check for getutent().
124 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
125 friends. Since I can only check on Linux, please check if
126 this works on other systems.
128 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
130 * Applied patch from Peter Maydell to uip/scansbr.c for more
131 checks for write failures.
133 * Unlink temporary file properly in uip/rcvtty.c.
135 * Moved viamail from bindir to libdir.
137 * Changed sendfiles into sendfiles.in, so that path to viamail
140 * Added gzip support to sendfiles.
142 * Added References header to replcomps and replgroupcomps.
144 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
146 * Fixed m_getfld bug which caused segmentation faults when
147 incorporating messages which ended in multiple linefeeds crossing
150 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
152 * msh has been unable to show MIME messages ever since 1.0. Alec
153 Wolman <wolman@cs.washington.edu> tracked down the problem to the
154 -show flag being passed to mhshow. mhshow is equivalent to the
155 old mhn -show, so we don't need the -show anymore. Removed it.
157 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
159 * zotnet/bboards is not longer built by default. Goal is to move
160 the assorted functions in zotnet into sbr or some more logical
163 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
164 as well as Makefiles.
166 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
168 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
169 seperately and redundantly defined, but so that OBJS is a
170 pattern-substituted version of SRCS with suffix .c -> .o. This
171 should make maintainability easier.
173 * Added section to MACHINES indicating what platforms nmh is known
174 to compile and work on, just to give users peace of mind, or
175 something. This is by no means complete or exhaustive, so add
176 whatever you know works.
178 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
180 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
181 enabled" line. If POP3 is the only kind of POP enabled, say so,
182 rather than just saying "yes" (which is ambiguous).
184 * Fixed four warnings in Shantonu's new getpass.c. Needed to
185 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
186 "h/mh.h" for adios(). Also changed ch from char to int to get rid
187 of "comparison is always 1 due to limited range of data type" on EOF.
189 * Added steps to README.developers saying to change the version
190 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
191 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
193 * Changed configure.in to use gcc -Wall even without
194 --enable-debug, to prevent developers compiling optimized from
195 introducing warnings, and to give end-users a warm, fuzzy feeling
196 as they (hopefully) see no warnings come out (except perhaps on
197 the lex output file) even with -Wall.
199 * Renamed getpass() to nmh_getpass() since the prototype for
200 getpass() varies from OS to OS, and we want to _always_ use our
201 version of the function. Fixed all the callers to use
202 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
203 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
204 and the memory leaked -- should have just been declared as static
205 char array. Prepended "Portions of this code are" to the
206 copyright message, as this version has been changed significantly
207 from the BSD version.
209 * Added "nmh-local functions to use in preference to OS versions"
210 section to README.developers (currently just says to use
211 nmh_getpass() instead of system getpass()).
213 * Prepended "Portions of this code are" to the copyright message
216 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
219 This happens on solaris:
222 windex entry incorrect: mts.conf(5) not found.
223 No manual entry for mts.conf.
227 % echo ".so man5/mh-tailor.5" > mts.conf.5
229 done in the man5 directory. We need to add 'mts.conf.5' as a
230 reference sourcing mh-tailor.5.
232 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
234 * Doug informed me that the way I had restored the "lost" version
235 histories was wrong, because `cvs checkout's of old versions of
236 nmh wouldn't work properly. It occurs to me that this could be
237 fixed by simply deleting those tags in the new-location *,v files,
238 but oh well. I'm putting everything back to the way Doug
239 originally had it. To get the old version history for a file that
240 used to be in the top directory, you'll need to "blindly" do a
241 `cvs log' there (even though you won't have a local copy of the
242 file in that directory). `cvs diff' will no longer be able to
243 diff pre-move versions vs. post-move versions -- you'll have to do
244 a lot of manual gyrations with `cvs checkout' and then use `diff'.
246 * I had alphabetized the --configure options in the --help output
247 awhile back, but Shantonu added --enable-apop just under
248 --enable-pop. Put it in alphabetical order and clarified what
249 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
250 --with-mts help line from "mail transport agent" to "mail
251 transport agent/service" so the 's' in "mts" doesn't seem to come
254 * Added two steps to "releasing nmh" in README.developers. After
255 making the tarball, it's a good idea to diff the tree vs. the CVS
256 tree to make sure no files got left out, and then to chown the
257 files so that they're owned by root, preventing a Trojaning attack
258 by a malicious remote user with a UID matching yours.
260 * Changed DIFFERENCES to say that RPOP is not currently supported
261 rather than implying it by saying that APOP, KPOP, and POP[3] are.
263 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
265 * Imported NetBSD version of getpass() and made extensive
266 revisions for compatibility with programs that pipe the password
267 to stdin, such as exmh.
269 * Removed tests for system ruserpass() which sometimes gave
270 phantom positive results. Also, bext to use internal functions if
271 we ever want to change .netrc format to something else, or access
274 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
276 * Restored lost version histories for those moved files by doing a
277 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
278 command so that you can move files (without having physical access
279 to the CVSROOT) without losing versioning. Put MACHINES back at
280 the top level as it needs to be read before building. Fixed DIST
281 variable in {.,docs}/Makefile.in to reflect that and to add
282 missing entry for "INSTALL" file.
284 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
286 * Re-cleaned up nmh documentation (by moving things to docs
287 subdir) and modified Makefile & configure.in to handle the change.
289 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
291 * Scott Blachowicz pointed out that the configure --help output
292 for --enable-masquerade was misleading. Clarified.
294 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
296 * APOP support can be compiled in to inc and msgchk using
299 * To access an APOP host, specify -apop on the command line
300 along with any -host or -user option.
302 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
304 * Upped the version number to 1.0.4+dev until the next nmh release.
306 * Added a "releasing nmh" section to README.developers, while the
307 process was fresh in my mind.
309 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
311 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
312 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
314 * Released nmh-1.0.4.
316 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
318 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
321 It appears that there shouldn't be quotes around the %s in the
322 iso-8859-1 charset entry; xterm passes the remaining arguments
323 to the program, quoting them means that xterm thinks they're
324 part of the program's name.
326 This %s isn't the same as the "Insert content subtype" one from
327 mhshow-show-* -- it doesn't come from MIME headers and is safe not
330 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
332 * added check in fmt_compile() to handle a single-character
333 format string. fmt_compile() depends on having an array of
334 format characters with an empty item at the end. A
335 single-character format would cause programs using this
336 function to segfault because the algorithm used to decide on
337 the length of the array mistakenly created a single-item array
338 when the format string was one character. This eventually
339 caused problems when the program attempted to test item+1
342 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
344 * Richard Coleman threw out a lot of old MH-specific files in nmh.
345 Much of the stuff, indeed, is not worth saving, but there are
346 nuggets that are very worthwhile, and should probably be added
347 back in. Most important, IMHO, are the MH change logs, as they
348 can help answer questions like "Why is this code like this?" or
349 "How long has this been broken?" or "What was this ever used for?"
351 I've added a new file to the nmh tree called
352 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
353 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
354 to go from newest at the top to oldest at the bottom to match the
355 ChangeLog convention. Unfortunately there are no change logs for
356 versions of MH prior to 3 in the MH tar files available at
357 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
358 are MH-6.6 changes that aren't documented in the logs.
360 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
361 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
362 and its "catman"-type output are a pain to deal with, but I was
363 loath to throw away the formatting, so I converted the file to
364 HTML. The only actual markup in the body are the "<B>" and "<U>"
365 tags, and "<" and ">" instead of '<' and '>', so it's quite
366 doable to view the file in plain ASCII mode as well. Note that
367 some of the changes this file documents as having been made in
368 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
369 and later put in certain 6.8.4 stuff.
371 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
373 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
374 fixing apparent bugs in Dan Winship's new security quoting code:
376 Since upgrading, I've been getting the following errors
377 while attempting to process some MIME messages:
379 (1) Syntax error: Unterminated quoted string
384 (2) line 1/10 (END)Segmentation fault (core dumped)
386 (2) appears to be due to the testing of an unset pointer in
387 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
388 mis-quoting a filename being handed to the shell in
389 mhshowsbr.c:show_content_aux().
391 Resolving the pointer reference issue in
392 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
393 problem in the routine.
395 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
397 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
398 prevent core dumping on packf. Here's the note from his message:
400 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
401 core on a file w/o a From line with a line >= BUFSIZ.
402 I noticed this because I had a junk file in my mail
405 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
407 * wesley.craig@umich.edu did not document his previous KPOP patch,
408 so I did so, and asked him to check what I wrote. Unfortunately
409 he didn't notice my misunderstanding of his patch. I wrote that
410 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
411 exclusively, but if you leave it as "pop3", you can use Wesley's
412 new -kpop switch on a given invocation. Instead, however, -kpop
413 turned out to be necessary on every invocation, and a KPOP user
414 complained. Applied Wesley's new patch, which makes things work
415 like I thought his original patch did. After that, did one more
416 clarifying pass to the documentation in inc.man and msgchk.man.
418 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
420 * When I fixed the long-standing makedir() bugs in January, I had
421 the code call strtoul(..., 0), which I believed to be safe as all
422 modes specified as ASCII constants in the nmh code started with a
423 leading zero (signifying octal), which I did as it would work if
424 internal constants were ever changed to hex. Unfortunately I was
425 unaware of the "Folder-Protect:" .mh_profile entry, which
426 mh-profile.man documents as an octal-only constant, with no
427 leading zero required. I've changed the strtoul() call to an
428 atooi() call and removed the misleading leading zeroes on the
429 ASCII octal constants in the code and man pages. Also changed the
430 "Folder-Protect:" example in the man page to something more
431 interesting than a duplication of the default.
433 * When I added my --enable-masquerade option, you'll note that I
434 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
435 options too wordy and I'm not sure why Richard went that route.
436 I've renamed them to just --enable-*, but the old versions will
437 still work as well (they just aren't advertised).
439 * Added a line to the "nmh configuration" output saying whether
442 * Added a new README.developers file. From the file:
444 This file is intended to provide a few tips for anyone doing
445 development on nmh. Developers who learn things "the hard
446 way" about the nmh codebase (as opposed to local info best
447 encoded in a comment) are encouraged to share their wisdom
450 Currently the topics are "autoconf files" and "directory structure".
452 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
454 * Applied, after some finessing,
455 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
457 Here's a patch that allows you to add
459 --with-smtpservers=<some.host.name>
461 to the ./configure command line to set the "servers: " line in
462 etc/mts.conf. Around here, we use "mailhost" so that all
463 machines in the current domain just talk to a central machine
464 and nothing else runs an MTA. Now, I can use
466 --with-smtpservers=mailhost
468 instead of having to remember to fix this by hand (and often
469 forgetting to do so!).
471 * Inspired by Simon's patch, added an --enable-masquerade option
472 to configure. It will set the "masquerade:" line of mts.conf.
473 You may specify a subset of the three types of masquerading, like
474 --enable-masquerade="draft_from mmailid", or leave off explicit
475 arguments to enable all three types.
477 * Alphabetized the --enable and --with options in configure.in and
478 INSTALL and added documentation of the two new options to the latter.
480 * Added new dependency for mts.conf: Makefile. If this isn't
481 done, then when you reconfigure nmh with new values for
482 --enable-masquerade or --with-smtpservers, you'll fail to get an
483 updated copy of mts.conf.
485 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
487 It seems that some MUA's didn't handle y2k very well - ELM
488 seems to be one of them, and Ultrix's DXmail (based on MH!).
489 I've got a few emails this month that look like:
491 575 Jan 00 Xxxxxx Xxxx 3603 ...
493 22+ Jan 00 Xxx Xxxxx 1771 ...
495 The first has "15 Jan 100" as the date and the second has
496 "19 Jan 00" as the date. The following works around this so
497 that scan, show, sortm, etc work ok.
499 I put Simon's patch under the control of a new #define called
500 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
501 acconfig.h about when you might not want to #define it.
503 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
504 lexed on Solaris 2.6. Added missing dependency in
505 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
507 * Added scan.MMDDYY and scan.YYYYMMDD format files.
509 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
511 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
513 With the patch below, you can add lines like:
515 mhshow-suffix-application/msword: .doc
516 mhshow-suffix-application/PostScript: .ps
518 to the mhn.defaults file to append the given suffix to a
519 scratch file. This allows applications which require a
520 certain suffix to run properly.
522 * Removed -force_html from lynx entry in mhn.defaults.sh (I
523 believe older versions of lynx lack that option) and added
524 "mhshow-suffix-text/html: .html".
526 * Modified username_extension masquerading to only use the
527 extended address on generated [Resent-]From: lines and SMTP
528 envelope From:. With Neil's original implementation, nmh's global
529 idea of the username was changed, which would result in inc lying
530 and saying you had no new mail because it was looking for a
531 mailbox called, for instance, "dan-nmh" (where username was "dan"
532 and $USERNAME_EXTENSION was "-nmh").
534 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
536 There's a wrap-around problem that affects the implementation
537 of Zeller's congruence in dtime.c. This causes the day-of-week
538 calculations to fail for dates after Feb 29, 2000 (probably up
539 until some year far in the future).
541 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
543 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
545 I finally tracked down the problem in msh that was causing
546 errors whenever I tried to examine a 'mmdf' style mailbox.
548 It turns out that not enough memory was being allocated with
549 calloc(), causing memory pointers to be overwritten and
552 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
554 * Changed the new "plussed_user" option to mts.conf's
555 "masquerade:" to "username_extension" after getting feedback from
556 qmail users, who use '-' as a separator rather than '+'. Removed
557 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
558 which needs to include the appropriate separator for your MTA
559 ('-', '+', or whatever) as its first character.
561 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
563 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
565 * Added a note to DIFFERENCES stating that it's out-of-date
566 (Richard was the last one to update it) and that we should
567 consider only documenting incompatibilities with MH there.
569 * Implemented (and documented) a third kind of username
570 masquerading: "plussed user" masquerading. This one was suggested
571 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
572 "plussed user" feature, where mail sent to <user>+<string> will be
573 delivered to <user>. When it's enabled, it's controlled by the
574 $USERPLUS environment variable. How is it enabled? Well, that
577 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
578 changed it so that rather than being a boolean, it can be set to
579 any combination of the three values "draft_from", "mmailid", and
580 "plussed_user". Thus it is now possible to enable the three types
581 of masquerading individually.
583 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
584 where if it was turned on, ','s would no longer be considered
585 GECOS field delimiters.
587 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
589 * Changed the GECOS-field '&' translation behavior to be
590 controlled by the BSD42 #define rather than GCOS_HACK, since it's
591 apparently always appropriate on OSes where BSD42 is #defined, and
592 never appropriate on any other OSes. Thanks to Kimmo Suominen for
593 responding to my "What is this code here for?" comment in mts.c
594 and explaining the feature.
596 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
598 * Upped the version number to 1.0.3+dev (ideally this should be
599 done by whoever makes a release tar file, immediately after doing
602 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
603 patch, posted to comp.mail.mh, which he says prevents loss of mail
604 when inc'ing into a full filesystem.
606 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
607 so that stamp-h.in will be different each time configure.in and
608 related files are changed, making it easier to check it in (which
609 is necessary to prevent unnecessary autoconf calls).
611 * My declaration of initgroups() in slocal.c to eliminate the "no
612 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
613 use AC_EGREP_HEADER to see where initgroups() is declared, if
616 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
618 * Fix security hole in mhshowsbr.c which allowed untrusted shell
621 * Released nmh 1.0.3.
623 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
625 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
626 be surrounded by single quotes, as a shell is not spawned when
627 just saving files, and the filenames will end up with literal
628 quotes embedded in them.
630 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
632 * Whoever originally added the -help switch to all the commands
633 got too cute and had the option itself print out as "-(help)" in
634 the -help output. One theory is that they were making reference
635 to the fact that clearly you know about the -help option since
636 you're currently looking at its output. I think it's a bad idea
637 to overload the meaning of the parentheses, however -- they're
638 supposed to indicate what abbreviated prefix of the switch you're
641 The other theory is that because you can say something like
642 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
643 by the same list of switches you get with -help, they were saying
644 you can "sorta" abbreviate "-help" as "-". You don't get the
645 "Usage:" string, though, so it's not really the same thing.
647 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
649 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
651 The following patch fixes a problem with requesting a
652 service key for a machine that has multiple 'A' records. It
653 also makes "-kpop" a command line option, for users who
654 would like to use both "kpop" and "pop".
656 Did no testing of the new features, as I don't have access to a
659 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
661 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
663 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
665 * All %-escapes in mhn.defaults that actually expand to something
666 should be surrounded by single quotes. Added quotes to the ones
667 in mhn.defaults.sh that were missing them.
669 * Added check for lynx to write mhshow-show-text/html line in
672 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
674 * makedir() had multiple bugs dating back to MH. An octal
675 constant was apparently being interpreted as decimal, resulting in
676 directories with no user read or execute permissions, making
677 nested directory creation fail. And there wasn't even an
678 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
679 in .mh_profile) on the outer directories of a nested directory.
681 * A second `make install' would always fail because the check for
682 whether mh_profile.5 existed was written incorrectly.
684 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
686 * Added documentation on both types of masquerading to post's man
689 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
691 * Doug's portability fix of my setgid inc autodetection had a
692 caching bug -- if you re-ran configure, uip/Makefile would be
693 corrupted, and installation would bomb out on OSes where inc needs
696 * Implemented a new kind of email address masquerading. Usually,
697 when a user writes a custom "From:" header in a draft, nmh uses it
698 rather than generating one. However, the user's true address is
699 used in the SMTP envelope "From:" and is revealed in the "Sender:"
700 header. Now, when mmailid is set to non-zero, the envelope
701 "From:" uses the address specified in the draft "From:" header,
702 and there is no "Sender:" header. This is useful when sending on
703 behalf of a remote POP3 account or when remote mail robots
704 incorrectly use the envelope "From:" in preference to the body
705 "From:". This processing has only been implemented for post, not
706 for the undocumented spost (which was already missing some "From:"
707 processing that post has).
709 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
711 * Got rid of the rest of the gcc -Wall warnings that I didn't have
712 time for on 1999-07-15 (and, it would seem, some new ones people
713 introduced since then). The primary ones were the warnings that
714 default prototypes were being used for [v]snprintf() and
715 str[n]casecmp(). As of right now, there are _no_ compilation
716 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
719 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
721 * Move mhtest from bindir to libdir.
723 * Move sendfiles from libdir to bindir.
725 * Updated sendfiles manpage to reflect this change.
727 * Added documentation for -build and -file switches to repl and
728 forw manpages (patch from Peter Maydell).
730 * Fixed interaction between specifying -cc in profile and -group on
733 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
735 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
736 not unanimous support for my proposed even/odd release/developer
737 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
740 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
742 * Upped the version number to 1.0.3. If we don't do this, then
743 when people report bugs against 1.0.2, we won't know "which" 1.0.2
744 they're talking about (since the development source is publically
745 available via CVS). I think the Linux kernel version numbers are
746 a good model, so the next time we roll a tarball, it should be
747 version 1.0.4 (or higher -- anyhow, an even-numbered version).
749 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
751 * Released nmh-1.0.2.
753 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
755 * Added check for whether "libtool" is in fact gnu libtool. If
756 it is, it is not used. This is the wrong behavior. If vendor
757 XYZ later on decides to create yet another libtool, we'll be
758 caught again. This works for now.
760 * Minor updates to MACHINES refering to Mac OS X.
762 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
764 * Added check for "libtool" (a ranlib type tool for Mac OS X)
765 and modified Makefiles so that nmh will build under Mac OS X.
767 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
769 * Changed repl defaults to partly revert to MH behaviour,
770 "-cc all" is now only implied with -group.
772 * The replcomps template includes cc: header again (as in MH).
774 * Updated repl man page to reflect these changes.
776 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
778 * Tweaked configure to handle Solaris and SunOS after the BIND
779 changes. Both need more cleanup.
781 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
783 * Removed BIND define and replaced it with a check for
784 gethostbyname (to determine if the host is DNS aware) and a
785 check for sethostent. This appears to be the right thing to
786 do, but there is no explanation of the reasoning behind the
787 BIND define in the code and it appears to have been used for
790 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
792 * Updated manpages Makefile to link mh-profile.5 to
793 mh_profile.5 after installation. Suggestion from Richard Cohen
794 <richard@jubjub.demon.co.uk>.
796 * Modified configure.in to check for _IO_write_ptr and libio.h
797 to determine whether to define LINUX_STDIO instead of using
800 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
802 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
803 multiple machines in the past where the mail spool was a symlink
804 to a directory on another device with more free space.
806 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
808 * Fixed a portability problem in Doug's fix of a portability
809 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
811 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
813 * Added config.sub and config.guess to the list of files to be
816 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
817 added if a list of addresses was split over several header lines.
819 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
820 macros, regardless of platform.
822 * Allow q to quit mhshow, and n to skip to next part. Patch from
823 Kimmo Suominen <kim@tac.nyc.ny.us>.
825 * Modified mhstore to recognize attachments created by sendfiles
826 with x-conversions=gzip.
828 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
830 * added explicit cast to long from time_t for tclock in
833 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
834 it's needed for ioctl() anyway. This prevents a warning about
835 implicit definition of ioctl().
837 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
838 "User Configuration" section of config.h (moved @TOP@ in
839 acconfig.h) so they're easier to find, should someone actually
840 want to mess with them.
842 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
844 * updated Makefile.in so it recognized COMPLETION-TCSH and
845 COMPLETION-ZSH (only used in make nmhdist).
847 * added prototype for ruserpas to <h/prototypes.h>. Fixes
848 warnings in mhparse.c and mhbuildsbr.c.
850 * added include checks for <time.h> and <sys/time.h> to
851 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
852 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
854 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
855 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
856 warnings about implicit definition of mts_init().
858 * added <grps.h> to slocal.c to prevent warnings about
861 * added <h/signals.h> to prevent warning about missing SIGNAL
864 * added function prototypes to smtp.c, whatnowproc.c,
865 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
868 * explicitly declared mbx_style in mshcmds.c and lused in
869 fmtdump.c as type static int instead of just static to
872 * various code cleanups to prevent ambiguous statements
873 (brackets for if/thens and parens for complicated if
877 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
879 * commented out _cleanup() in mf.c because it's the only
880 location in all of the source code where it exists. It was
881 preventing compilation on at least linux.
883 * Added check for <db1/ndbm.h> which is the new location where
884 linux systems appear to be stuffing this header file.
886 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
888 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
890 * added mh_profile SEGV patch from Richard Cohen
891 <richard@jubjub.demon.co.uk> that prevents crashing when
892 mh_profile doesn't end in a newline. A similar patch was
893 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
895 * fixed bug in associated with MAILGROUP #define (group "mail"
896 is not universal) -- hard to believe, but true.
898 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
900 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
902 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
904 * Automated #define of MAILGROUP and installation of inc as setgid mail
905 when the mail spool directory isn't world-writable.
907 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
909 * slocal -debug used to leave a file in /tmp for each message
910 processed. Very bad for folks with slocal -debug in their .forward!
912 * Got rid of a ton of compilation warnings. Most were "junk"
913 warnings due to the use of gcc -Wall (without -Wno-parentheses),
914 but a few represented real bugs. There remain many warnings to be
915 tackled that are due to missing function prototypes (e.g. snprintf()).
917 * Default rcvdistcomps no longer puts a copy of all outgoing
918 messages in outbox. Added an rcvdistcomps.outbox that does.
920 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
922 * Updated configure to check for mkstemp (available on OpenBSD) and
923 substitute it for mktemp if available.
925 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
927 * Added config.sub and config.guess and updated acconfig.h and
928 configure.in to automatically detect system type and set the
931 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
933 * Released nmh-1.0.1.
935 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
937 * Fixed flist to properly deal with relative folder names.
938 Problem noted by Jerry Peek <jpeek@jpeek.com>.
940 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
941 well as the Kerberos 5 compat libraries. Based on a patch from
942 Assar Westerlund <assar@sics.se>.
944 * Added a check in configure.in to test if modf is in libc and
945 link with libm if not. This is needed by at least Digital UNIX.
946 Problem pointed out by Kevin Oberman <oberman@es.net>.
948 * Fix a bug from the "mhn -show" to "mhshow" renaming that
949 made the "list" command in whatnow not work for some users.
950 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
952 * Replaced "extern int errno" with "#include <errno.h>" in a
953 number of files. Suggested by Stephen Wilson Bailey
956 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
957 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
959 * Fixed a segmentation fault in inc. Patch originally from Ruud de
960 Rooij <r.c.m.derooij@twi.tudelft.nl>.
962 * Allow display of 8bit encoded messages. From Kimmo Suominen
965 * Fixed repl to not add line breaks in the middle of long
966 addresses when building a reply. From Ruud de Rooij
967 <r.c.m.derooij@twi.tudelft.nl>.
969 * Added -library switch to spost so it can parse user aliases like
970 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
972 * Changed configure.in's check for sigsetjmp to properly deal
973 with systems like Linux where it is a macro. From
974 <elleron@servtech.com>.
976 * Fixed a bug in whatnow that could cause it to sometimes exit
977 without prompting the user. Based on a patch by Richard Geiger
980 * Added code to deal with SIGPIPE in mhl so it doesn't print
981 "Broken pipe" if you quit out of the moreproc.
983 * Documentation: Added a note to MACHINES about Irix make. Added a
984 pointer to the online copy of the MH book in INSTALL. Added
985 some additional information to the whatnow and packf man pages,
986 suggested by Jerry Peek <jpeek@jpeek.com>.
988 * Updated INSTALL, FAQ, etc to not refer to Richard as the
989 maintainer or math.gatech.edu as the home any more.
991 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
995 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
996 mbx_open so that the mode of zero length maildrops
997 would not be changed.
999 * Replaced the substitute version of snprintf() with the
1000 one from the Apache web server.
1002 * Changed to default mode for creating new messages to 0600
1003 (this should have been done a long time ago).
1005 * Changed "flist" to handle searching for multiple sequences
1006 for each folder. Also flist will now correctly split
1007 Unseen-Sequence if it consists of multiple sequences.
1009 * Added new switches `-unlink' and `-nounlink' to "refile".
1011 * Added new switches `-unlink' and `-nounlink' to "rmm".
1013 * More cleanups of slocal output. Changed adorn() to
1014 send to stdout, instead of stderr (to match rest of
1017 * Merged mbx_create() into mbx_open, so that creating and
1018 opening a nonexistent maildrop is done atomically. This
1019 removes a bad race condition.
1021 * Fixed bug that caused slocal to be unable to save to MMDF
1024 * Added new wrapper function usr_folder() to slocal.c to
1025 handle adding message to folder (currently, it still uses
1026 usr_pipe() to call rcvstore).
1028 * seq_list() checks for empty folder before scanning for
1029 sequence information.
1031 * num_digits() in flist.c and folder.c now returns correct
1032 value for 0. Also added sanity check.
1034 * folder_delmsgs() now correctly decrements internal message
1037 * Don't attempt to read sequence information if folder
1040 * Split seq_read into seq_public and seq_private.
1042 * Small change to sigmsg.awk, since newer versions of gawk
1043 interpret 034 as octal.
1045 * In flist, don't scan for sequence information in empty folder.
1047 * Updated mhn.defaults.sh to output profile entries for mhshow,
1048 mhstore, and mhbuild.
1050 * Changed configuration parameter "mhn-access-ftp" to
1051 "nmh-access-ftp". Updated man pages
1053 * Moved the code in InitMultipart to reverse the order of the
1054 parts in a multipart, into its own function "reverse_parts()".
1056 * Changed code in mhbuildsbr.c to store unencoded content
1057 in the c_cefile structure when building.
1059 * Changed code in mhoutsbr.c to look for unencoded content
1060 in the c_cefile structure when outputing message.
1062 * Changed configuration parameter "mhn-cache" and
1063 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1064 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1066 * Change configuration parameter "mhn-storage" to
1067 "nmh-storage", since it is now used in mhstore, mhlist,
1068 and mhshow. Updated man pages
1070 * Add autoconf support for KPOP (kerberized pop).
1072 * Add autoconf support for Hesiod.
1074 * Split routines to output a message given a Content structure
1075 (output_message, output_content, write7Bit, etc..) to a new
1078 * Split output_content(), into output_content() and build_headers().
1080 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1081 list of header fields, rather than reopening the message.
1083 * Added free_header() to mhfree.c to free structures containing
1084 header field information.
1086 * Changed get_content() to use the linked list of header fields
1087 when parsing the various MIME headers (Content-XXX).
1089 * Changed get_content() to store linked list of header field
1090 values when parsing a content.
1092 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1093 routines in mhcachesbr.c to handle the content cache.
1095 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1096 cache_content) into new file mhcachesbr.c.
1098 * More calls to sprintf/strcpy (primarily in mhparse.c
1099 and mhbuildsbr.c) converted to snprintf/strncpy.
1101 * When a message is displayed with `mhshow', it is now
1102 removed from the "unseen" sequence.
1104 * Change the default "showmimeproc" to "mhshow".
1106 * Split "mhn -show" off into separate command "mhshow".
1108 * Split "mhn -store" off into separate command "mhstore".
1110 * Split "mhn -list" off into separate command "mhlist".
1112 * Add sanity checks to context_find(), context_replace(),
1113 and context_del(), to abort if context file hasn't been
1116 * Add calls to context_read(), to the beginning of all nmh
1117 commands (instead of being called indirectly by context_find).
1119 * Changes the "substitute" version of vsnprintf/snprintf for
1120 operating systems without native versions, to just call the
1121 native vsprintf(), and ignore the buffer length. This is
1122 faster, but less secure than the previous version that used
1123 temporary files. This should only be a problem for systems
1124 which do not have a native snprintf(), and require `inc' to
1127 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1129 * Changes client() routine to take additional parameter, which is
1130 the buffer length of the parameter "response". Then added
1131 buffer length checks for this parameter.
1133 * Changed getws() to get_fields(), since that is apparently the
1134 name of a wide character version of gets() on some archetitures.
1136 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1138 * Change the code in most of the commands that take multiple
1139 message names/sequences/ranges on the command, such that
1140 the msgs array is expanded dynamically. This removes most
1141 of the limits on the length of command lines.
1143 * Add additional parameter to copyip(), to specify the
1144 maximum number of strings that can be copied (security
1147 * Create new function getarguments(), to massage the argument
1148 vector before parsing it (add any arguments from your
1149 profile to the beginning of the argument vector). This
1150 also removed the general limit on the number of command line
1153 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1155 * Released nmh-0.27.
1157 * Added a new command "delete", that is available during
1158 a "whatnow" session. It is equivalent to "quit -delete".
1160 * Added another parameter to editfile (in whatnowsbr.c),
1161 that controls whether editfile should remember the last
1162 program that was exec'ed. This way the whatnow command
1163 "mime", will not be re-executed if "edit" is later given
1166 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1167 mhbuild returns an error.
1169 * Added parameter to sendsbr(), so you may specify whether to
1170 rename the draft file.
1172 * Pass delay time to splitmsg() as a parameter, rather than
1173 use a global variable.
1175 * Moved code to rename draft file after sending message from
1176 splitmsg and sendaux, to sendsbr.
1178 * Removed all the code in viamail to split messages and then
1179 mail them. Replaced this with the standard sendsbr.c routines.
1181 * Changed sendsbr(), so that when splitting messages into
1182 messages of type "message/partial", the header fields that
1183 are copied are more compliant with RFC-2046.
1185 * Fixed mhbuild to track temporary files better. They are
1186 now correctly removed when mhbuild aborts.
1188 * Created a new man page for "sendfiles". The information
1189 about "mhn -viamail" in the "mhn" man page was moved to
1192 * Changed the name of the "viamail" shell script to
1193 "sendfiles". Modified "sendfiles" to use the new
1196 * Moved the functionality for "mhn -viamail" out of mhn,
1197 and into a separate executable called "viamail".
1199 * When storing MIME contents to a folder using mhn -store,
1200 they are now accumulated in a temporary file, and then added
1201 to the folder using folder_addmsg().
1203 * Moved code to save content to a folder from store_content
1204 to new function output_content_folder.
1206 * Moved code to save content to file from store_content to
1207 new function output_content_file.
1209 * Moved code to parse storage format string from store_content
1210 to new function parse_format_string.
1212 * Fix copy_some_headers() in mhstoresbr.c, so that the
1213 correct header fields in the first enclosing message/partial
1214 will be copied (according to RFC2046), when using mhn -store
1215 to reassemble messages of type message/partial.
1217 * Fixed bug to openFTP() in mhparse.c, that caused the
1218 tmp file to not be removed, when transferring a
1219 message/external file from ftp.
1221 * Moved the code in mhparse.c to process -auto switch (scan
1222 contents for the attribute "name"), to a new function
1223 "get_storeproc" in mhstoresbr.c.
1225 * Moved routines to free data structures related to MIME
1226 content from mhparse.c and mhbuildsbr.c, to new file
1229 * Moved code to show/display MIME content into new
1232 * Moved code to store MIME content from into
1233 new file mhstoresbr.c
1235 * Moved code to parse MIME content into new
1238 * Moved code to list information about MIME content
1239 into new file mhlistsbr.c.
1241 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1242 and set_endian() to new file mhmisc.c.
1244 * Start to isolate the code to show, list, and store MIME
1245 messages. One side effect is that only one flag (-show,
1246 -list, or -store) can be used at a time now.
1248 * mhn -store -auto wasn't storing file in correct directory.
1250 * Removed a few dead variables from sbr/ruserpass.c
1252 * move code for creating tmp files, and renaming the
1253 the composition draft in mhbuild, from build_mime()
1256 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1257 the -[no]auto switch (which isn't used in mhbuild).
1259 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1262 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1264 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1266 * Released nmh-0.26.
1268 * Added (unlisted) options [no]dashstuffing to send, post,
1269 and whatnow to determine whether to do RFC934 quoting
1270 (dashstuffing) for encapsulated BCC messages. The default
1271 is still the same (dashstuffing).
1273 * Changed the undocumented feature "nodashmunging" in forw
1274 and mhl, into the documented feature "nodashstuffing". The
1275 default for forw, is still "dashstuffing" for backward
1276 compatibility, although I don't believe that bursting
1277 RFC934 digests is very common anymore.
1279 * Added an option to define REALLYDUMB in the default config.h.
1280 But it is not on by default.
1282 * moved creation of config file mts.conf from zotnet/mts
1283 to etc. This simplified the Makefile in zotnet/mts.
1285 * simplified directory support/general to etc.
1287 * removed unneeded directory support/bboards.
1289 * split getusername() into getusername() and getuserinfo().
1291 * Changed getusr() routine to getusername().
1293 * Slight cleanup in folder_pack.c on code that records the new
1294 number of the "cur" message when packing.
1296 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1298 * Released nmh-0.25.
1300 * Change install process, so that hard linking the correct mts
1301 library to libmts.a, is not necessary. The final link process
1302 uses the original name of the library.
1304 * Fixed bug in flist.c and folder.c, so that symbolic links which
1305 point to directories, will not decrement the number of directory
1308 * Split the function list_content (in mhn.c and mhbuild.c) into
1309 list_content and list_debug.
1311 * Don't pack (folder -pack) an empty folder.
1313 * Exit gracefully in flist.c, if no sequence is specified,
1314 and no "Unseen-Sequence" is given in nmh profile.
1316 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1318 * Released nmh-0.24.
1320 * Small clarification to the man page for `ali'.
1322 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1323 are given, that order doesn't matter.
1325 * Fix bug in seq_list.c when realloc'ing for
1326 large sequence line.
1328 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1330 * Released nmh-0.23.
1332 * Add new section on "Transfer Encodings" to man page for mhbuild.
1334 * In mhbuild.c, split compose_content into compose_content
1335 (parse and execute composition string), and scan_content (scan
1336 content, decided transfer encoding, check for clash with boundary
1337 string). I did a good amount of rearranging of this code.
1339 * Moved definitions for data structures for parsing MIME
1340 messages from mhn.c and mhbuild.c to a new include
1343 * Small amount of rearranging in sendsbr.c
1345 * Small changes to MAIL.FILTERING file.
1347 * Add the file MAIL.FILTERING to nmh distribution.
1349 * Add line to packf so that if message begins with
1350 "X-Envelope-From:" field, it is converted to "From ".
1352 * Fix packf to add "From " line to beginning of message,
1353 even if Return-Path doesn't exist.
1355 * Add note to MACHINES file that on Linux, configure
1356 doesn't find the functions sigsetjmp/siglongjmp.
1358 * Fix configuration for machines that don't have (or find)
1359 sigsetjmp/siglongjmp.
1361 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1363 * Released nmh-0.22.
1365 * Add a configure check for sigsetjmp. Add some conditional
1366 #define's in h/signals.h in case it's not found.
1368 * Added additional notes about -auto switch in mhn man page.
1370 * Added note about MM_CHARSET environment variable to
1371 mh-profile(5) man page.
1373 * Fix signal problem in mhn.c (change setjmp/longjmp to
1374 sigsetjmp/siglongjmp).
1376 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1378 * Released nmh-0.22-pre1.
1380 * Changed the first line in mhl.format from
1381 " -- using template mhl.format -- " to a blank line.
1383 * Added note about automimeproc to mh-profile man page.
1385 * Reorganize the main entry point for parsing a MIME message
1386 or file in mhn. Add new function parse_file() as new main
1387 entry point for parsing MIME files.
1389 * Add note to mhn man page, that "mhn -file -" will accept the
1390 source message on the standard input.
1392 * Changed a sanity check in folder_realloc that was too strict.
1394 * -norfc934mode is now the default for mhbuild,
1395 rather than -rfc934mode.
1397 * Fix mhbuild, so that Content-Description and RFC-822 comments
1398 from #forw directive will be correctly included if there is
1401 * Change mhn to correctly default parts of multipart/digest to
1402 message/rfc822 (leftover code from rfc934mode was removed).
1404 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1407 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1409 * Released nmh-0.21.
1411 * If the file given to mhbuild is "-", then accept the draft on
1412 standard input, and output the MIME message to standard output.
1414 * Cleaned up code in mhbuild.c that decides what transfer
1417 * Cleaned up code in mhbuild.c that decides what character set
1418 to use for text contents.
1420 * Removed old hpux specific code from zotnet/tws/lexstring.c
1422 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1424 * Released nmh-0.21-pre2.
1426 * Added the "decode" variable to mhl.format and mhl.header.
1428 * Added new variable "decode" to mhlsbr.c to decode text in
1429 header fields as per RFC-2047.
1431 * Make sure that when decoding RFC-2047 header fields, that any
1432 spaces at the ends of the encoded text are not ignored, but the
1433 spaces between encoded word are.
1435 * Removed #ifdef's for MIME. MIME support is always compiled in.
1437 * scan/inc will now decode both Subject and From lines as
1438 RFC-2047 encoded header fields.
1440 * Added new function write_charset_8bit() to sbr. It returns
1441 the character set to use for 8bit text in composition draft.
1442 Changed mhbuild to use this function.
1444 * Split mhn man page into man pages for mhn and mhbuild.
1446 * mhn -show will only now only use default method for content
1447 of type plain, if it is NOT a part of a multipart/alternative.
1449 * Split mhn -build into mhbuild. Did some code cleanup.
1451 * Added support for %(decode) to fmtdump.c.
1453 * check_charset() now accepts US-ASCII as a subset of any
1454 ISO-8859-X character set.
1456 * Changed the default "showproc" to mhl, instead of the
1459 * When reading file into mhn composition file, only need read
1460 permissions, not write permissions.
1462 * Added own version of strcasecmp to distribution, since
1463 nmh calls it frequently with NULL pointers (ughh).
1465 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1468 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1470 * Released nmh-0.21-pre1.
1472 * If a message is missing charset parameter to text/plain, show
1473 will assume US-ASCII, rather than just calling showmimeproc.
1475 * Change show.c and mshcmds.c to use check_charset to see if text
1476 message contains valid character set.
1478 * Added new scan format file "scan.nomime" to support/general
1479 that doesn't do any RFC-2047 decoding.
1481 * Modified all the scan format files in support/general to do
1482 RFC-2047 decoding of Subject field.
1484 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1485 ignore whitespace between two valid encoded words, but not
1486 between an encoded word and normal text.
1488 * Created new file sbr/check_charset.c. Moved code from
1489 fmt_rfc2047.c to check for valid character set to this file.
1491 * Added format escape %(decode) to decode contents of "str" register
1492 as a RFC-2047 header field.
1494 * The command install-mh now recognizes the switches -version
1497 * Added a new argument to print_help.c to decide whether to
1498 print profile entries (needed for install-mh to prevent weird
1501 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1502 is initialize to max (mp->lowmsg, 1) rather than always 1.
1504 * Changed macros for sequence/attribute manipulation so that
1505 message status array doesn't need to always start at 1.
1507 * Small cleanups in folder_realloc().
1509 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1511 * Released nmh-0.20.
1513 * Added configure option --with-pager=PAGER.
1515 * Added configure option --with-editor=EDITOR.
1517 * Changed the default format file for mhl (mhl.format) to
1518 also ignore (not display) the header fields Content-Type,
1519 Content-Transfer-Encoding, and Content-ID
1521 * Fixed core dump in addrsbr.c when using %(proper) format function
1522 and the To: line was missing.
1524 * Added the file ZSH.COMPLETION to the distribution.
1526 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1528 * Released nmh-0.20-pre2.
1530 * Added new switch -snoop to both `msgchk' and `inc', so you can
1531 watch the POP transaction.
1533 * Changed "replgroupcomps" to check for Mail-Followup-To header
1534 first, and use it if available.
1536 * Changed "replcomps" to check for Mail-Reply-To header
1537 first, and use it if available.
1539 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1541 * Released nmh-0.20-pre1.
1543 * Changed seq_list.c to dynamically enlarge the buffer for
1544 collecting the message ranges in a long sequence line.
1545 This should remove the last hard limit on the size of a
1548 * Changed seq_read.c so that can read long sequence lines.
1549 It will use multiple calls to m_getfld() when m_getfld()
1550 returns the state FLDPLUS.
1552 * Changed brkstring.c to dynamically add more space for pointers
1553 if necessary. This is needed when splitting up large sequence
1556 * Did some small cleanups in seq_save.c.
1558 * Added new switches `-[no]unseen' to rcvstore, to control
1559 whether new messages are added to Unseen-Sequence.
1561 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1563 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1564 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1566 * Changed "replcomps" to not include CC and TO lines so that
1567 that reply message is only directed at the author of the
1568 message to which you are replying.
1570 * Added new switch `-group' to command repl, which causes repl
1571 to use new forms file "replgroupcomps". This is intended for
1572 making group replies.
1574 * Removed #ifdef for ATHENA.
1576 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1578 * Released nmh-0.19.
1580 * Fix repl,forw so that switch `-form file' will not abort
1581 as ambiguious (silly mistake on my part).
1583 * Cleaned up the mhn man page. Added info about a few escapes
1584 for the formatting/display strings that were not documented
1585 (%%, %t). Moved the BNF grammar for the mime composition file,
1586 to the end of the man page.
1588 * Added the options -[no]format to the command repl. The
1589 switch `-format' will filter the message to which you are
1590 replying with the standard message filter "mhl.reply", which
1591 is now included in the distribution. The `-noformat' option
1592 will negate the use of -format or -filter and not include
1593 the message to which you are replying in the draft.
1595 * Did some cleaning and reorganization on many of the man
1598 * Added debugging switch `-debug' to mhparam, which displays
1599 the values of all `procs' (and some other misc configuration
1600 info) that nmh keeps in global variables.
1602 * When using `refile -preserve', if a conflict occurs, then use
1603 the next available number above the message number you wish
1606 * In forw.c, split the code for creating MIME style forwarding
1607 out of copy_draft, and into copy_mime_draft.
1609 * Move routines in mark.c to print sequences, into new
1610 file sbr/seq_print.c
1612 * flist will now update the current folder.
1614 * Added the switches -[no]fast to flist, to replace
1615 -[no]total. The previous switches are still accepted
1616 but now undocumented.
1618 * More reorganization in flist of the code for
1621 * The command "flist +foo -all" will now scan the folder
1622 "foo" and all its 1st level children.
1624 * Add missing include file <h/mh.h> to sbr/snprintf.c
1626 * Fix alarm bug in rcvtty, so that when it calls external
1627 process, the alarm is never longer than 30 minutes.
1629 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1631 * Released nmh-0.18.
1633 * Fixed bug in mark, so that "mark -list -seq foo" will
1634 correctly indicate if "foo" is a private sequence. I found
1635 this bug mentioned in Jerry Peek's book.
1637 * Simplified the code in seq_setcur(), since seq_addmsg() now
1638 retains the public/private status of sequences.
1640 * Changed sequence handling so that if the switches -public
1641 or -nopublic, are not specified for the commands mark, pick,
1642 or rcvstore, then existing sequences will retain their
1643 previous public/private status.
1645 * mhparam now handles the mh-sequences profile entry
1648 * flist -all will now also check readonly folders (for
1651 * Improve the leaf optimization for folder command.
1652 It will now track the number of directories in a folder,
1653 and stop stat'ing files once it has hit all the subfolders.
1655 * Renamed m_getfolder to getfolder. Changed getfolder to
1656 take option to determine whether it should get current
1657 folder, or just default folder (Inbox). Changed rcvstore,
1658 inc, and rmf to use the new getfolder.
1660 * flist now indicates if a sequence is private.
1662 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1663 wait for stopped processes.
1665 * conflict will dynamically allocate space for group names,
1666 so it can now handle system with more than 100 groups.
1668 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1670 * Released nmh-0.18-pre4.
1672 * Check if we have enough message status space, before we
1673 call folder_realloc() in burst, mhpath, and m_draft().
1675 * mhn will now correctly identify a formatting string of "-"
1676 for the option -store, and send content to stdout.
1678 * Change the way that memory for message status is
1679 allocated. It is dynamcially allocated separately from
1680 the folder/message structure. This required changing
1681 folder_read.c, folder_realloc.c, folder_free.c.
1683 * Removed all the MTR code (experimental code for message
1686 * Renamed m_readfolder.c to folder_read.c and simplified
1689 * Renamed m_freefolder.c to folder_free.c.
1691 * Add function trim() to slocal.c to pretty print
1692 the debugging output.
1694 * Changed the name of m_packfolder() to folder_pack().
1695 Changed the name of m_remsg() to folder_realloc().
1697 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1699 * Released nmh-0.18-pre3.
1701 * Changed installation to add `flists' which is hard linked
1702 to `flist'. This is a equivalent to `flist -all'.
1704 * For flist, -showzero is on by default.
1706 * Major changes to flist. Default is now for flist to search
1707 current folder. The switch `-all' is now used to specify
1708 searching all top level folders. The new switch `-showzero'
1709 is used to print out folders that don't contain any messages
1710 in the given sequence.
1712 * Split BuildFolderList in flist.c into 2 functions
1713 (BuildFolderList, BuildFolderListR). Changed these functions
1714 so that flist now does better leaf optimization, and will stop
1715 stat'ing directory entries when it knows it has hit all the
1716 subdirectories of a given directory.
1718 * Reorganized code in folder.c, so that all relevant folders
1719 are scanned first and information recorded. Then all the
1720 folder summaries at printed out at one time.
1722 * Made the options of folder(s) more orthogonal. Now
1723 "folder -all -noheader -nototal" will do the right thing.
1725 * Added `-noall' switch to folder, for completeness.
1727 * Changed the default mode for creation of new folders
1730 * Slightly changed the format for flist. It now indicates
1731 if a folder is current. Also the width of the various
1732 fields are now calculated at runtime.
1734 * Changed the format for folder(s). Folder names
1735 are now left justified. The width of the various fields
1736 are calculated at runtime.
1738 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1740 * Released nmh-0.18-pre2.
1742 * Add paragraph to man page for install-mh and to INSTALL file
1743 about checking for global mh.profile.
1745 * Renamed m_find() to context_find().
1746 Renamed m_replace() to context_replace().
1747 Renamed m_delete() to context_del().
1748 Renamed m_update() to context_save().
1749 Renamed m_getdefs() to context_read().
1750 Renamed m_foil() to context_foil().
1752 * Change rcvstore to use routine folder_addmsg(), instead of
1753 adding message to folder itself.
1755 * Changed refile, so that if the switch -preserve is used,
1756 and a conflict occurs for a particular folder, then folder_addmsg()
1757 will just use next highest available number for that folder,
1760 * Make folder_addmsg() more robust. It will make repeated
1761 attempts to link file into folder if link returns with
1764 * Fix bug, so that that if forking sendmail, HELO will be sent
1765 unless clientname: option is defined but empty (so now it
1766 is the same as the direct smtp code).
1768 * Changed sprintb to snprintb (now we pass the buffer length
1769 to new routine). Changed code to use new function.
1771 * Added snprintf to sbr. Added configure check to build it
1772 if you don't have a native version (but haven't changed much
1773 code to use it yet).
1775 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1777 * Released nmh-0.18-pre1.
1779 * Fixed alarm bug in slocal, so that alarm is never
1780 called with a value larger than 30 mintues.
1782 * Fixed race condition in rmm and refile, so that
1783 context is updated before external rmmproc is called.
1785 * Removed all the OVERHEAD code.
1787 * Move code to add message to folder from refile.c
1790 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1792 * Did some rearranging of the internals of inc.c.
1794 * Make -inplace the default for anno, forw, dist, and repl.
1796 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1798 * Created new directory mts/sendmail for direct sendmail
1799 interface (although it currently still uses SMTP).
1801 * Removed all the TMA (trusted mail agent) code
1803 * Removed all the TTYD (terminal access daemon) code
1805 * Removed all the MF (uucp filtering) code.
1807 * Removed all the code for BERK.
1809 * Removed all the code for stand-alone delivery (MHMTS).
1811 * Split the file mts/sendmail/smail.c into sendmail.c and
1812 smtp.c. Changed the name of the directory to mts/smtp.
1814 * Changed autoconf to use @sysconfdir@ for location of
1815 configuration files.
1817 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1819 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1821 * Released nmh-0.17.
1823 * MAKEDEFS weren't passed down to recursive makes correctly.
1825 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1826 of hard-coding "/etc/utmp".
1828 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1831 * Remove configure checks for ulong and ushort. Changed
1832 code to just use unsigned {short, long}.
1834 * Change addmsg function in refile.c to return new
1835 number of refiled message.
1837 * Added check in get_returnpath for empty unixbuf.
1839 * Cleanup of sbr/pidstatus to use more POSIX macros
1840 for return value of wait().
1842 * Change configure to also check /bin for "more".
1844 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1846 * Released nmh-0.16.
1848 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1850 * Added automimeproc, which should replace automhnproc.
1852 * multipart messages will no longer abort for messages
1853 of type 8bit or binary (although we still can't really
1854 deal with binary messages, yet).
1856 * Fix double free of c_storage. From John MacMillan.
1858 * mhn now treats unknown subtypes of "text" as text/plain.
1860 * mhn changed so that specifying mhn-show-multipart, or
1861 mhn-show-multipart/{mixed, alternate, etc...) will override
1862 the use of the internal method for displaying these types.
1863 Previously mhn would always use the internal method for subtypes
1864 mixed, alternate, digest, and parallel (even if an alternate
1865 method was specified in mhn.defaults).
1867 * mhn show treats unknown subtypes of multipart, as type
1868 multipart/mixed (as specified RFC2046).
1870 * mhn checks for the parameter "name" rather than "x-name".
1871 From MH-6.8.4 patch.
1873 * Fix double free of ctinfo in user_content when using
1874 #forw with single message. From John MacMillan (and
1877 * Changed -mhnproc switch for show, to -showmimeproc.
1879 * Changed profile entry "mhnproc" to "showmimeproc".
1881 * Added "mime" option to "whatnow", which calls the program
1882 "buildmimeproc" (default is mhn -build) to process MIME
1885 * Added -build switch to mhn, to process MIME composition
1888 * Did some reorganizing of mhn.c.
1890 * Changed casting in mts/sendmail/smail.c from (char) to
1891 (signed char) so SMTP reply codes work correctly for machines
1892 which used unsigned chars by default.
1894 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1896 * Released nmh-0.15.
1898 * Added new form "scan.unseen" to distribution. It marks messages
1899 which are in any sequence in Unseen-Sequence.
1901 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1903 * Fix sign extension bugs in fmt_scan.c.
1905 * Fix m_atoi.c so that strings ending in non-digit characters
1908 * Split code in burst.c so that finding delimiters of digested
1909 messages and bursting a message into multiple messages are
1910 two separate functions (find_delim and burst).
1912 * Add workaround fo AC_PATH_PROG in configure.in, so
1913 that BSD4.4 machines can find sendmail, vi, more.
1915 * Added "-width" option to rcvtty.
1917 * Change a few variable names in zotnet/mts/client.c since
1918 they conflict with defines on AIX.
1920 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1921 unsuccessful if resulting file is less than 500 lines long
1922 (rather than 10, which was previous value), since AIX
1923 sed gives mangled file of about 200 lines.
1925 * Extract code in rcvstore.c to link message into folder,
1926 and put in own subroutine.
1928 * Extract code in refile.c to link message into folder,
1929 and put in own subroutine.
1931 * Moved code to remove messages from folder into own
1932 routine "folder_delmsgs" in sbr. Changed rmm.c and
1933 refile.c to use new routine.
1935 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1937 * Renamed m_seqok to seq_nameok.
1939 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1942 * Changed m_seqflag to return the number of a sequence rather
1943 than its bit flag. Changed its name to seq_getnum and renamed
1944 file to sbr/seq_getnum.c.
1946 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1949 * Added zero switch to m_seqadd function to zero out bits before
1950 adding message to sequence.
1952 * Renamed function m_setvis to m_setunseen, and renamed
1953 corresponding file in sbr.
1955 * Renamed function m_setseq to m_setprev, and renamed corresponding
1958 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1960 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1961 all selected messages from a sequence.
1963 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1964 selected messages to a sequence.
1966 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1969 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1971 * Renamed function pack_folder to m_packfolder, and moved it
1972 from uip/folder.c into its own file sbr/m_packfolder.c
1974 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1976 * Changed function m_gmsg to m_readfolder. Renamed file
1977 sbr/m_gmsg.c to sbr/m_readfolder.c.
1979 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1981 * Expanded rcvtty man page, and added small patch from
1982 MH-6.8.4 distribution.
1984 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1986 * Released nmh-0.14.
1988 * Comment out configure test and code for tgetent to allocate its
1989 own termcap buffer when passed a NULL argument.
1991 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1993 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1994 to show. Restructured code to handle options to various
1995 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1996 environment variable.
1998 * Added new man page `mh-draft' which documents the
1999 draft folder facility in nmh.
2001 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
2004 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
2005 fmtcompile.c to fmt_compile.c, and formataddr.c to
2008 * `send -help' wasn't showing the -(no)mime and -split
2011 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
2013 * Released nmh-0.13.
2015 * Changed mhpath so it doesn't abort if a message sequence
2016 such as "mhpath all" expands to more than 1000 messages.
2017 Also mhpath now dynamically reallocated space for message
2018 names (The number of command line arguments is still limited
2021 * Did some general restructuring of the code in folder.c
2022 that checks for folder information, and prints it.
2024 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
2026 * Changed `folder' to reallocate space for folder names if
2027 necessary. So `folders' can now handle more than 300 folders.
2029 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
2031 * Change configure to use a compile check to see if the tm struct
2032 has tm_gmtoff, rather than using egrep.
2034 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
2036 * Released nmh-0.12.
2038 * Had set_exists and unset_exists macros backwards.
2040 * Released nmh-0.11.
2042 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2044 * Added documentation to mh-profile.man about the various
2045 `procs' (mhlproc, showproc, lproc, etc...).
2047 * Replace the bit twiddling for SELECTED, UNSEEN, and
2048 mp->attrstats with macros.
2050 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2053 * Change fstat to stat in m_gmsg.c since Linux wants
2056 * Merge Linux patch sent in by Michel Oosterhof (original
2057 patch from bsa@kf8nh.wariat.org).
2059 * Document an undocumented MH feature. mhn -form mhl.null
2060 will suppress the display of the message header.
2062 * mhparam will now return "mhparam etcdir".
2064 * Add catproc to /config/config.c and use that in show.c
2065 and mshcmds.c, rather than hard coding in /bin/cat.
2067 * Add mhnproc to the list of `procs' in mh-profile.man.
2069 * Add configure test for lorder and tsort commands.
2071 * Commented out the padding in the `msgs` struct in h/mh.h
2073 * Change m_gmsg.c to allocate elements to the `info' array by
2074 500 elements at a time (rather than MAXFOLDERS / 5).
2076 * Add note to man page for mhmail that zero length messages are
2077 not sent. Need to use -body "" to send empty messages.
2079 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2081 * sbr/getcpy.c : assign '\0' to character, not NULL.
2083 * add m_fmsg to most programs in uip so that they explicitly free
2084 folder/message structure when done with folder.
2086 * uip/slocal.c : cleanup processing of sender. Make sure it is
2087 defined even if message is missing "From " line.
2089 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2091 * Released nmh-0.10.
2093 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2095 * Add configure check for <locale.h>. Turn on LOCALE support
2098 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2100 * Reversed previous decision to retain "From " lines in slocal.
2101 The "From " line is now removed from all messages.
2103 * inc now saves the date from the "From " envelope in the
2104 Delivery-Date header for all messages.
2106 * sbr/m_getfld.c: Clean up processing of Return-Path and
2107 Delivery-Date from the "From " envelope.
2109 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2111 * client.c: cast iaddr to int before comparing return value
2112 of inet_addr with NOTOK.
2114 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2116 * Grep test for signal names was failing on some OS'es because
2117 of missing tabs in regex.
2119 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2121 * Released nmh-0.09.
2123 * Move config files and format files to *.old before installing.
2125 * Add configure check for killpg.
2127 * msh.c: include <termios.h> instead of <termio.h> and
2130 * prompter.c: don't include <sys/ioctl.h> anymore.
2132 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2134 * Added `-mime' and `-nomime' options to `repl'.
2137 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2139 * ruserpass.c : removed conflicting prototypes.
2141 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2142 by `mesg' command. Previously only worked on BSD machines.
2144 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2146 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2147 than hard coded "/etc/utmp".
2149 * Released nmh-0.08.
2151 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2152 when accessing ndbm/db file for duplicate suppression, instead of
2153 locking database itself.
2155 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2157 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2159 * Changed the slocal actions `file' and `>' to always deliver in
2160 mbox (uucp) format rather than be determined by RPATHS config
2163 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2164 rather than mmdf format.
2166 * slocal now adds Delivery-Date field to all messages (previously it
2167 only added it to messages when delivering them to a file). The
2168 "From " line is now retained on all messages if compiling with
2169 RPATHS, rather than being discarded.
2171 * rcvpack no longer adds the Delivery-Date field to messages.
2173 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2175 * Removed the script packmbox, since it's functionality has been
2178 * Changed packf so that it uses mbox (uucp) format by default
2179 rather than mmdf format. Added options -mbox and -mmdf to
2180 packf so you can choose the preferred format.
2182 * Changed rcvpack so that it uses mbox (uucp) format by default
2183 rather than mmdf format. Added options -mbox and -mmdf to
2184 rcvpack so you can choose the preferred format.
2186 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2188 * Changed nmh to use dot locking by default (although you
2189 can still easily change this in config.h).
2191 * Simplified locking code. Removed code allowing setting of
2192 locking type in mts.conf. Now the locking type and locking
2193 directory (if any) can only be set at compile time.
2195 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2197 * Prefer getting timezone information from tm->gmtoff rather
2198 than tzset and external timezone variable.
2200 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2202 * Fixed typo in ruserpass.c in the variable toktabs.
2204 * When ruserpass was added to LIBOBJS, it was missing
2207 * Released nmh-0.07.
2209 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2211 * Add check to configure, so that if ruserpass, or _ruserpass
2212 is not found, build version of ruserpass in sbr.
2214 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2215 the code that manipulates internals of stdio, will build
2218 * Added #define to control whether to compile the simple
2219 built-in FTP client in mhn.
2221 * Added configure check for ushort and ulong. Change code
2222 to use ushort/ulong rather than u_short/u_long.
2224 * A couple of small cleanups in locking code.
2226 * Added configure check for gmtoff element in struct tm.
2228 * Added configure check for tzset.
2230 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2232 * Released nmh-0.06.
2234 * Removed code for machines that don't have socket
2235 interface (how could they get mail anyway?).
2237 * Removed code for BSD41 machines. I don't think there are
2238 many such machines around anymore.
2240 * Add configure check for function uname, and prefer it
2241 over gethostname. General cleanup of zotnet/mts/mts.c.
2243 * Change all `lseek' calls to use POSIX symbolic constants
2244 SEEK_SET, SEEK_CUR, SEEK_END.
2246 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2248 * Check lex generated file in zotnet/tws and use
2249 pre-generated version if necessary.
2251 * Released nmh-0.05.
2253 * Change to use reliable signals on all platforms that have
2254 sigaction. Change so that interrupted system calls are
2255 restarted for all signals except SIGALRM. This fixes alarm
2256 handling code in smail.c for BSD based systems.
2258 * Added lorder and tsort commands so that created libs can
2259 be linked in one pass.
2261 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2263 * Changed pidwait so that while it is waiting for a child,
2264 it should block signals rather than ignore them.
2266 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2268 * Add checks to configure for dbm_open and -lndbm.
2270 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2272 * folder -pop and folder -push were freeing some memory too
2273 quickly, which caused the entry popped from the stack to not
2274 become the current folder.
2276 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2278 * Released nmh-0.04.
2280 * Define ospeed and PC in termsbr.c is OS doesn't have
2283 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2285 * editfile will create a symbolic link to the altmsg if it
2286 can't make a link, on any machine supporting lstat. Formerly
2287 this would happen only on BSD42 based machines.
2289 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2291 * traverse (in popsbr.c) wasn't calling va_start before using
2292 variable argument list. Fixes core dump in inc when using POP.
2294 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2296 * The variable pass in remotemail needed to be set to
2297 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2300 * inc and msgchk were using -rpop by default when configured
2301 with POP support. Default is now -norpop.
2303 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2305 * By default, post will now give the SMTP HELO command with
2306 the local hostname. If you specify a hostname with the
2307 clientname: option in mts.conf file, post will give the
2308 HELO command with that name instead. If the argument to the
2309 clientname: option is empty, no HELO command is given.
2310 (From the MH-6.8.4 diff)
2312 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2314 * When using `-help' for a command, it will also print its
2315 profile compents from .mh_profile. (From MH-6.8.4 diff)
2317 * "slocal -file" will now correctly takes its input from
2318 a file (currently need to specify full path).
2320 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2322 * "slocal -debug" will now issue a warning if a non-blank
2323 line in the .maildelivery file has less than 5 fields.
2325 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2327 * Changed slocal so that code for duplicate suppression
2328 (MH config was MSGID) is always built. Added the options
2329 -[no]suppressdup to slocal to turn this on/off.
2331 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2333 * Released nmh-0.03.
2335 * Fixed problem where mark would core dump if no
2336 .mh_sequence file existed.
2338 * Fixed problem where slocal would core dump if -debug
2339 option was given, and certain headers were missing.
2341 * Added patch to slocal to add `folder' (+) action, which
2342 is shorthand for piping message to rcvstore. Updated
2345 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2347 * Changed flist option -unseen to -[no]all. Cleaned up
2350 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2352 * Fixed flist. Changed the profile component `Folder-Order'
2353 to `Flist-Order. Added option `-sequence' to flist, so
2354 you can specify the name of the sequence to search for.
2356 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2358 * A few minor portability cleanups. Changed to use PATH_MAX
2359 rather than MAXPATHLEN. Don't assume ospeed variable exists
2360 in termsbr.c. Removed some conflicting prototypes.
2362 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2364 * Add configure test to check if tgetent will accept NULL
2365 and allocate its own buffer. Borrowed from zsh.
2367 * Changed libpath to etcpath.
2369 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2371 * Cleaned up source code and Makefiles, so that if your `make'
2372 supports the VPATH option, you can build nmh in a different
2373 directory from where the source code is located.
2375 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2377 * Released nmh-0.02.
2379 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2381 * Split mhook man page into man pages for rcvdist, rcvpack,
2384 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2386 * Changed code to use strerror, rather than using sys_errlist
2387 and sys_nerr directly.
2389 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2391 * -compat switch from install-mh removed.
2393 * Changed the default POP port from "pop" to "pop3".
2395 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2397 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2398 (again) to mhn.defaults.sh. Changed find_program (again) to
2399 mhn.find.sh. mhn.defaults.sh now takes the search path
2400 as an argument. Default search path is now specified in Makefile
2401 rather than in script.
2403 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2405 * Changed mtstailor file to mts.conf. Updated man pages.
2407 * Changed si_value to si_val in mhn.c, since it conflicts with
2408 macro defined on Solaris.
2410 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2412 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2413 support for Emacs front-end mhe. It is on by default.
2415 * Added the following configure options: --enable-nmh-pop to
2416 enable client side pop support, --enable-nmh-smtp to enable
2417 SMTP support. Client-side pop support now compiles. Man
2418 pages for inc, msgchk, mh-chart now correctly added pop
2421 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2423 * Added configure test for bug in C libraries where linker
2424 can't find ruserpass, but can find _ruserpass.
2426 * Fixed configure test so that termcap variable ospeed is
2429 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2431 * Source files converted to ANSI C.
2433 * md5 now compiled separately rather than being included
2434 in mhn.c. Changed md5 to use memset and memcpy.
2436 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2438 * Collected the error routines adios, advise, admonish, and advertise
2439 into one file (error.c), and did some rearranging of the code.
2441 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2443 * Added awk script sigmsg.awk (originally written by
2444 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2445 automatically generate signal messages for pidstatus.c.
2446 Added files sbr/signals.c, h/signals.h. Code now uses
2447 sigprocmask to block signals (if available). Code now uses
2448 signal blocking on non-BSD machines.
2450 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2452 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2454 * Released nmh-0.01.
2456 * Added configure code to check for type of signals functions
2457 you have (POSIX or BSD style signals). Added function
2458 SIGPROCMASK to simulate sigprocmask on machines that don't
2461 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2463 * Added -version switch to all commands. Also added to
2466 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2468 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2469 POSIX termios.h style functions if present.
2471 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2473 * Changed support/general/bootmhn.sh to output new mhn_defaults
2474 file to standard output by default (makes it easier for testing).
2475 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2476 script to find_program.
2478 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2480 * Added patch to uip/folder.c from exmh distribution to
2481 speed up -recurse option.
2483 * Added flist command from exmh distribution. It doesn't work
2484 yet, but it compiles :-)
2486 * Changed default location for install to
2487 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2488 and configuration files go in nmh/etc, and support binaries go
2489 in nmh/lib. Of course, all this can now be changed in the top
2492 * Started with mh-6.8.3 as based and converted to autoconf.
2493 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2494 Pop support and plenty of other things, are now broken.
projects / mmh / blob