1 Sat Jul 15 23:13:49 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
3 * Add configure option --with-hash-backup so the backup prefix can
4 be easily changed from "," to "#".
6 Tue Jul 11 14:18:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
8 * Clarified post.man and send.man for those not completely up on
9 SASL terminology. "SASL encryption layers are not supported for
10 SMTP" means that encryption is supported for the authentication
11 but not for the subsequent data stream.
13 Sat Jul 8 01:36:19 EDT 2000 Kimmo Suominen <kim@tac.nyc.ny.us>
15 * Applied Ken Hornstein <kenh@cmf.nrl.navy.mil>'s patches
16 implementing SASL support for POP3 and SMTP. If nmh is compiled
17 with SASL support, using the -sasl switch on the inc, msgchk,
18 post, and send commands will enable authentication encryption for
19 SMTP, and both authentication and data stream encryption for POP3.
21 Sat Jun 10 18:37:59 CEST 2000 Ruud de Rooij <ruud@ruud.org>
23 * Merged mts/sendmail functionality into mts/smtp; switching between
24 smtp and sendmail delivery method is now controlled by mts.conf.
26 * If tsort cannot deal with loops, in addition to defining tsort as
27 cat, also define lorder as echo.
29 * Removed uip/popi.c from list of sources.
31 Thu Jun 08 19:36:57 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
33 * New dtimep.lex didn't parse day names properly. Fixed. Also
34 clarified ambiguous comments preceding day_map[] array (from old
35 dtimep.lex) that probably led to the erroneous cp++ being added.
37 Wed Jun 7 20:52:33 CEST 2000 Ruud de Rooij <ruud@ruud.org>
39 * Added one more mkstemp invocation to uip/spost.c (which was in a
42 * Applied patch from Peter Maydell to clean up permissions handling
43 and error handling in uip/inc.c.
45 Mon Jun 5 22:10:07 CEST 2000 Ruud de Rooij <ruud@ruud.org>
47 * Use cat instead of tsort if tsort cannot deal with loops in its
48 input (which is the case for tsort from GNU textutils).
50 Mon Jun 5 21:14:36 CEST 2000 Ruud de Rooij <ruud@ruud.org>
52 * If lockfile is present, and its dotlockfile program is setgid,
53 inc does not need to be setgid.
55 Sun Jun 4 21:35:40 CEST 2000 Ruud de Rooij <ruud@ruud.org>
57 * Added autoconf test for Miquel van Smoorenburg's liblockfile
58 library, as found on Debian systems.
60 * Added liblockfile support to sbr/lock_file.c.
62 Wed May 31 7:19:30 2000 Shantonu Sen <ssen@mit.edu>
64 * Fixed up dtimep.lex a bit. Added back memory options for AIX to
65 increase available memory. Took out %option noyywrap, which
66 wasn't understood by AT&T lex, as well as the -i
67 case-insensitivity flag.
69 Wed May 31 07:40:45 2000 Doug Morris <doug@mhost.com>
71 * Added a lint target to the Makefiles and a check in autoconf
72 to determine whether lint or lclint exists on the system.
74 Fri May 30 19:21:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
76 * etc/Makefile.in was incorrectly installing mts.conf.in and
77 sendfiles.in -- fixed. Generated sendfiles script was not a
78 dependency of the `all' target, and was incorrectly included in
79 the distribution. Changed the suffix for the backed-up previous
80 versions of the etc files from the ambiguous .old to .prev. Added
81 call to diff -- only keep the .prev files around if different from
82 the newly-installed versions (intentionally didn't redirect output
83 to /dev/null so you'll notice when your changed versions are
86 * INSTALL never documented the etc/*.old thing. Documented the
87 new etc/*.prev thing (including a note to watch for diff output).
89 * Applied Alec Wolman <wolman@cs.washington.edu>'s dropsbr.c patch:
91 In the map_write routine, a call is made to map_open and this
92 call is supposed to set the "clear" variable to 0 or 1,
93 depending on whether the map file is empty or not. In
94 mh6.8.3, this worked because map_open would set "clear" by
95 calling the mbx_Xopen routine. In nmh, the code for mbx_Xopen
96 was merged into mbx_open, but the interface for mbx_open
97 doesn't support the clear variable, so that functionality was
98 lost. The map_open interface still contains "int *clear" in
99 the prototype, but never sets it.
101 My patch eliminates "clear" from the map_open interface (I
102 checked to make sure that map_write is the only client of
103 map_open). Furthermore, my patch also sets the "clear"
104 variable properly at the beginning of map_write by calling
105 fstat(). This eliminates the bug in that the value of "clear"
106 being used later in the routine was just stack garbage.
108 Having a bad value of clear causes this next bug to be
109 triggered: The fp file pointer was being opened with fdopen,
110 but in two of the three switch cases it wasn't being closed.
111 In certain cases, this was causing packf to run out of file
112 descriptors if you attempted to pack a large folder.
114 Mon May 29 7:48:15 2000 Shantonu Sen <ssen@mit.edu>
116 * Moved the date parsing routines from zotnet/tws to sbr/ (and
117 tws.h to h/). Updated all source files to reflect to new location
120 * Rewrote dparsetime (in dtimep.lex -> dtimep.c) to replace the
121 old zotnet/tws/dtimep.c, dtimep.lex, lexstring.c, lexedit.c, and
122 dtimep.c-lexed. It should now work with flex (although untested
123 with lex), and requires no sed-ing. For now, I have the lexed
124 version in the distribution, so that end-users don't need to worry
125 about running it through flex/lex. I have not added back support
126 for guessing the time zone when it's not specified.
128 Sun May 28 17:44:15 CEST 2000 Ruud de Rooij <ruud@ruud.org>
130 * Added autoconf check for getutent().
132 * Changed uip/rcvtty.c and uip/slocal.c to use getutent() and
133 friends. Since I can only check on Linux, please check if
134 this works on other systems.
136 Sun May 28 14:58:49 CEST 2000 Ruud de Rooij <ruud@ruud.org>
138 * Applied patch from Peter Maydell to uip/scansbr.c for more
139 checks for write failures.
141 * Unlink temporary file properly in uip/rcvtty.c.
143 * Moved viamail from bindir to libdir.
145 * Changed sendfiles into sendfiles.in, so that path to viamail
148 * Added gzip support to sendfiles.
150 * Added References header to replcomps and replgroupcomps.
152 Sun May 28 14:39:31 CEST 2000 Ruud de Rooij <ruud@ruud.org>
154 * Fixed m_getfld bug which caused segmentation faults when
155 incorporating messages which ended in multiple linefeeds crossing
158 Fri May 26 13:21:59 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
160 * msh has been unable to show MIME messages ever since 1.0. Alec
161 Wolman <wolman@cs.washington.edu> tracked down the problem to the
162 -show flag being passed to mhshow. mhshow is equivalent to the
163 old mhn -show, so we don't need the -show anymore. Removed it.
165 Fri May 12 02:51:21 2000 Shantonu Sen <ssen@mit.edu>
167 * zotnet/bboards is not longer built by default. Goal is to move
168 the assorted functions in zotnet into sbr or some more logical
171 * Moved zotnet/mf to sbr, and changed mf.h references accordingly,
172 as well as Makefiles.
174 Thu May 11 02:21:34 2000 Shantonu Sen <ssen@mit.edu>
176 * Simplified sbr/Makefile.in so that both SRCS and OBJS aren't
177 seperately and redundantly defined, but so that OBJS is a
178 pattern-substituted version of SRCS with suffix .c -> .o. This
179 should make maintainability easier.
181 * Added section to MACHINES indicating what platforms nmh is known
182 to compile and work on, just to give users peace of mind, or
183 something. This is by no means complete or exhaustive, so add
184 whatever you know works.
186 Tue May 09 20:38:04 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
188 * Alphabetized Shantonu's $pop_kinds output on configure's "pop is
189 enabled" line. If POP3 is the only kind of POP enabled, say so,
190 rather than just saying "yes" (which is ambiguous).
192 * Fixed four warnings in Shantonu's new getpass.c. Needed to
193 #include <stdlib.h> for calloc(), <unistd.h> for ttyname(), and
194 "h/mh.h" for adios(). Also changed ch from char to int to get rid
195 of "comparison is always 1 due to limited range of data type" on EOF.
197 * Added steps to README.developers saying to change the version
198 number to X.Y.Z+dev. Did a little rearranging and changed the FTP
199 dir from /home/ftp to /var/ftp to reflect Doug's new machine.
201 * Changed configure.in to use gcc -Wall even without
202 --enable-debug, to prevent developers compiling optimized from
203 introducing warnings, and to give end-users a warm, fuzzy feeling
204 as they (hopefully) see no warnings come out (except perhaps on
205 the lex output file) even with -Wall.
207 * Renamed getpass() to nmh_getpass() since the prototype for
208 getpass() varies from OS to OS, and we want to _always_ use our
209 version of the function. Fixed all the callers to use
210 nmh_getpass() and added it to prototypes.h. Semi-arbitrarily
211 upped MAX_PASSWORD_LEN from 128 to 256. buf was being calloc()'d
212 and the memory leaked -- should have just been declared as static
213 char array. Prepended "Portions of this code are" to the
214 copyright message, as this version has been changed significantly
215 from the BSD version.
217 * Added "nmh-local functions to use in preference to OS versions"
218 section to README.developers (currently just says to use
219 nmh_getpass() instead of system getpass()).
221 * Prepended "Portions of this code are" to the copyright message
224 * Added mts.conf.5 page per Neil W Rickert <rickert+nmh@cs.niu.edu>'s
227 This happens on solaris:
230 windex entry incorrect: mts.conf(5) not found.
231 No manual entry for mts.conf.
235 % echo ".so man5/mh-tailor.5" > mts.conf.5
237 done in the man5 directory. We need to add 'mts.conf.5' as a
238 reference sourcing mh-tailor.5.
240 Mon May 08 23:51:55 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
242 * Doug informed me that the way I had restored the "lost" version
243 histories was wrong, because `cvs checkout's of old versions of
244 nmh wouldn't work properly. It occurs to me that this could be
245 fixed by simply deleting those tags in the new-location *,v files,
246 but oh well. I'm putting everything back to the way Doug
247 originally had it. To get the old version history for a file that
248 used to be in the top directory, you'll need to "blindly" do a
249 `cvs log' there (even though you won't have a local copy of the
250 file in that directory). `cvs diff' will no longer be able to
251 diff pre-move versions vs. post-move versions -- you'll have to do
252 a lot of manual gyrations with `cvs checkout' and then use `diff'.
254 * I had alphabetized the --configure options in the --help output
255 awhile back, but Shantonu added --enable-apop just under
256 --enable-pop. Put it in alphabetical order and clarified what
257 --enable-apop does vs. --enable-pop and --with-krb4. Also changed
258 --with-mts help line from "mail transport agent" to "mail
259 transport agent/service" so the 's' in "mts" doesn't seem to come
262 * Added two steps to "releasing nmh" in README.developers. After
263 making the tarball, it's a good idea to diff the tree vs. the CVS
264 tree to make sure no files got left out, and then to chown the
265 files so that they're owned by root, preventing a Trojaning attack
266 by a malicious remote user with a UID matching yours.
268 * Changed DIFFERENCES to say that RPOP is not currently supported
269 rather than implying it by saying that APOP, KPOP, and POP[3] are.
271 Sun May 07 18:16:43 2000 Shantonu Sen <ssen@mit.edu>
273 * Imported NetBSD version of getpass() and made extensive
274 revisions for compatibility with programs that pipe the password
275 to stdin, such as exmh.
277 * Removed tests for system ruserpass() which sometimes gave
278 phantom positive results. Also, bext to use internal functions if
279 we ever want to change .netrc format to something else, or access
282 Sat May 06 08:28:09 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
284 * Restored lost version histories for those moved files by doing a
285 manual `mv' in the CVSROOT on mhost. CVS badly needs a `cvs mv'
286 command so that you can move files (without having physical access
287 to the CVSROOT) without losing versioning. Put MACHINES back at
288 the top level as it needs to be read before building. Fixed DIST
289 variable in {.,docs}/Makefile.in to reflect that and to add
290 missing entry for "INSTALL" file.
292 Sat May 06 13:13:07 2000 Doug Morris <doug@mhost.com>
294 * Re-cleaned up nmh documentation (by moving things to docs
295 subdir) and modified Makefile & configure.in to handle the change.
297 Mon Apr 17 21:28:40 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
299 * Scott Blachowicz pointed out that the configure --help output
300 for --enable-masquerade was misleading. Clarified.
302 Mon Apr 17 19:01:00 2000 Shantonu Sen <ssen@mit.edu>
304 * APOP support can be compiled in to inc and msgchk using
307 * To access an APOP host, specify -apop on the command line
308 along with any -host or -user option.
310 Fri Apr 14 23:10:44 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
312 * Upped the version number to 1.0.4+dev until the next nmh release.
314 * Added a "releasing nmh" section to README.developers, while the
315 process was fresh in my mind.
317 Fri Apr 14 18:21:34 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
319 * Added new files README.developers, ChangeLog_MH-3_to_MH-6.6, and
320 ChangeLog_MH-6.7.0_to_MH-6.8.4.html to DIST target in Makefile.in.
322 * Released nmh-1.0.4.
324 Tue Apr 11 21:37:03 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
326 * Applied Brian Campbell <bacam@tardis.ed.ac.uk>'s mhn.defaults.sh
329 It appears that there shouldn't be quotes around the %s in the
330 iso-8859-1 charset entry; xterm passes the remaining arguments
331 to the program, quoting them means that xterm thinks they're
332 part of the program's name.
334 This %s isn't the same as the "Insert content subtype" one from
335 mhshow-show-* -- it doesn't come from MIME headers and is safe not
338 Sun Apr 09 13:03:59 2000 Doug Morris <doug@mhost.com>
340 * added check in fmt_compile() to handle a single-character
341 format string. fmt_compile() depends on having an array of
342 format characters with an empty item at the end. A
343 single-character format would cause programs using this
344 function to segfault because the algorithm used to decide on
345 the length of the array mistakenly created a single-item array
346 when the format string was one character. This eventually
347 caused problems when the program attempted to test item+1
350 Thu Apr 06 21:53:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
352 * Richard Coleman threw out a lot of old MH-specific files in nmh.
353 Much of the stuff, indeed, is not worth saving, but there are
354 nuggets that are very worthwhile, and should probably be added
355 back in. Most important, IMHO, are the MH change logs, as they
356 can help answer questions like "Why is this code like this?" or
357 "How long has this been broken?" or "What was this ever used for?"
359 I've added a new file to the nmh tree called
360 ChangeLog_MH-3_to_MH-6.6. It's cobbled together from the
361 mh-6.8.4/papers/mh*/MHCHANGES files. I've re-ordered the entries
362 to go from newest at the top to oldest at the bottom to match the
363 ChangeLog convention. Unfortunately there are no change logs for
364 versions of MH prior to 3 in the MH tar files available at
365 <ftp://ftp.ics.uci.edu/pub/mh>. Also, it appears to me that there
366 are MH-6.6 changes that aren't documented in the logs.
368 I've also added ChangeLog_MH-6.7.0_to_MH-6.8.4.html. This is
369 based on mh-6.8.4/papers/changes/mh-changes.ms. The nroff format
370 and its "catman"-type output are a pain to deal with, but I was
371 loath to throw away the formatting, so I converted the file to
372 HTML. The only actual markup in the body are the "<B>" and "<U>"
373 tags, and "<" and ">" instead of '<' and '>', so it's quite
374 doable to view the file in plain ASCII mode as well. Note that
375 some of the changes this file documents as having been made in
376 MH-6.8.4 may not be present in nmh -- Richard started with 6.8.3
377 and later put in certain 6.8.4 stuff.
379 Wed Apr 05 21:09:28 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
381 * Applied Eric Schnoebelen <eric@cirr.com>'s mhshowsbr.c patch
382 fixing apparent bugs in Dan Winship's new security quoting code:
384 Since upgrading, I've been getting the following errors
385 while attempting to process some MIME messages:
387 (1) Syntax error: Unterminated quoted string
392 (2) line 1/10 (END)Segmentation fault (core dumped)
394 (2) appears to be due to the testing of an unset pointer in
395 mhshowsbr.c:show_multi_aux(). (1) appears to be caused by
396 mis-quoting a filename being handed to the shell in
397 mhshowsbr.c:show_content_aux().
399 Resolving the pointer reference issue in
400 mhshowsbr.c:show_multi_aux() turned up a similar mis-quoting
401 problem in the routine.
403 Tue Mar 28 16:17:39 2000 Doug Morris <doug@mhost.com>
405 * Applied Todd.Miller@courtesan.com's patch to dropsbr.c to
406 prevent core dumping on packf. Here's the note from his message:
408 Since sizeof(buffer) == sizeof(tmpbuffer) packf will dump
409 core on a file w/o a From line with a line >= BUFSIZ.
410 I noticed this because I had a junk file in my mail
413 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
415 * wesley.craig@umich.edu did not document his previous KPOP patch,
416 so I did so, and asked him to check what I wrote. Unfortunately
417 he didn't notice my misunderstanding of his patch. I wrote that
418 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
419 exclusively, but if you leave it as "pop3", you can use Wesley's
420 new -kpop switch on a given invocation. Instead, however, -kpop
421 turned out to be necessary on every invocation, and a KPOP user
422 complained. Applied Wesley's new patch, which makes things work
423 like I thought his original patch did. After that, did one more
424 clarifying pass to the documentation in inc.man and msgchk.man.
426 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
428 * When I fixed the long-standing makedir() bugs in January, I had
429 the code call strtoul(..., 0), which I believed to be safe as all
430 modes specified as ASCII constants in the nmh code started with a
431 leading zero (signifying octal), which I did as it would work if
432 internal constants were ever changed to hex. Unfortunately I was
433 unaware of the "Folder-Protect:" .mh_profile entry, which
434 mh-profile.man documents as an octal-only constant, with no
435 leading zero required. I've changed the strtoul() call to an
436 atooi() call and removed the misleading leading zeroes on the
437 ASCII octal constants in the code and man pages. Also changed the
438 "Folder-Protect:" example in the man page to something more
439 interesting than a duplication of the default.
441 * When I added my --enable-masquerade option, you'll note that I
442 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
443 options too wordy and I'm not sure why Richard went that route.
444 I've renamed them to just --enable-*, but the old versions will
445 still work as well (they just aren't advertised).
447 * Added a line to the "nmh configuration" output saying whether
450 * Added a new README.developers file. From the file:
452 This file is intended to provide a few tips for anyone doing
453 development on nmh. Developers who learn things "the hard
454 way" about the nmh codebase (as opposed to local info best
455 encoded in a comment) are encouraged to share their wisdom
458 Currently the topics are "autoconf files" and "directory structure".
460 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
462 * Applied, after some finessing,
463 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
465 Here's a patch that allows you to add
467 --with-smtpservers=<some.host.name>
469 to the ./configure command line to set the "servers: " line in
470 etc/mts.conf. Around here, we use "mailhost" so that all
471 machines in the current domain just talk to a central machine
472 and nothing else runs an MTA. Now, I can use
474 --with-smtpservers=mailhost
476 instead of having to remember to fix this by hand (and often
477 forgetting to do so!).
479 * Inspired by Simon's patch, added an --enable-masquerade option
480 to configure. It will set the "masquerade:" line of mts.conf.
481 You may specify a subset of the three types of masquerading, like
482 --enable-masquerade="draft_from mmailid", or leave off explicit
483 arguments to enable all three types.
485 * Alphabetized the --enable and --with options in configure.in and
486 INSTALL and added documentation of the two new options to the latter.
488 * Added new dependency for mts.conf: Makefile. If this isn't
489 done, then when you reconfigure nmh with new values for
490 --enable-masquerade or --with-smtpservers, you'll fail to get an
491 updated copy of mts.conf.
493 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
495 It seems that some MUA's didn't handle y2k very well - ELM
496 seems to be one of them, and Ultrix's DXmail (based on MH!).
497 I've got a few emails this month that look like:
499 575 Jan 00 Xxxxxx Xxxx 3603 ...
501 22+ Jan 00 Xxx Xxxxx 1771 ...
503 The first has "15 Jan 100" as the date and the second has
504 "19 Jan 00" as the date. The following works around this so
505 that scan, show, sortm, etc work ok.
507 I put Simon's patch under the control of a new #define called
508 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
509 acconfig.h about when you might not want to #define it.
511 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
512 lexed on Solaris 2.6. Added missing dependency in
513 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
515 * Added scan.MMDDYY and scan.YYYYMMDD format files.
517 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
519 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
521 With the patch below, you can add lines like:
523 mhshow-suffix-application/msword: .doc
524 mhshow-suffix-application/PostScript: .ps
526 to the mhn.defaults file to append the given suffix to a
527 scratch file. This allows applications which require a
528 certain suffix to run properly.
530 * Removed -force_html from lynx entry in mhn.defaults.sh (I
531 believe older versions of lynx lack that option) and added
532 "mhshow-suffix-text/html: .html".
534 * Modified username_extension masquerading to only use the
535 extended address on generated [Resent-]From: lines and SMTP
536 envelope From:. With Neil's original implementation, nmh's global
537 idea of the username was changed, which would result in inc lying
538 and saying you had no new mail because it was looking for a
539 mailbox called, for instance, "dan-nmh" (where username was "dan"
540 and $USERNAME_EXTENSION was "-nmh").
542 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
544 There's a wrap-around problem that affects the implementation
545 of Zeller's congruence in dtime.c. This causes the day-of-week
546 calculations to fail for dates after Feb 29, 2000 (probably up
547 until some year far in the future).
549 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
551 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
553 I finally tracked down the problem in msh that was causing
554 errors whenever I tried to examine a 'mmdf' style mailbox.
556 It turns out that not enough memory was being allocated with
557 calloc(), causing memory pointers to be overwritten and
560 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
562 * Changed the new "plussed_user" option to mts.conf's
563 "masquerade:" to "username_extension" after getting feedback from
564 qmail users, who use '-' as a separator rather than '+'. Removed
565 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
566 which needs to include the appropriate separator for your MTA
567 ('-', '+', or whatever) as its first character.
569 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
571 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
573 * Added a note to DIFFERENCES stating that it's out-of-date
574 (Richard was the last one to update it) and that we should
575 consider only documenting incompatibilities with MH there.
577 * Implemented (and documented) a third kind of username
578 masquerading: "plussed user" masquerading. This one was suggested
579 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
580 "plussed user" feature, where mail sent to <user>+<string> will be
581 delivered to <user>. When it's enabled, it's controlled by the
582 $USERPLUS environment variable. How is it enabled? Well, that
585 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
586 changed it so that rather than being a boolean, it can be set to
587 any combination of the three values "draft_from", "mmailid", and
588 "plussed_user". Thus it is now possible to enable the three types
589 of masquerading individually.
591 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
592 where if it was turned on, ','s would no longer be considered
593 GECOS field delimiters.
595 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
597 * Changed the GECOS-field '&' translation behavior to be
598 controlled by the BSD42 #define rather than GCOS_HACK, since it's
599 apparently always appropriate on OSes where BSD42 is #defined, and
600 never appropriate on any other OSes. Thanks to Kimmo Suominen for
601 responding to my "What is this code here for?" comment in mts.c
602 and explaining the feature.
604 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
606 * Upped the version number to 1.0.3+dev (ideally this should be
607 done by whoever makes a release tar file, immediately after doing
610 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
611 patch, posted to comp.mail.mh, which he says prevents loss of mail
612 when inc'ing into a full filesystem.
614 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
615 so that stamp-h.in will be different each time configure.in and
616 related files are changed, making it easier to check it in (which
617 is necessary to prevent unnecessary autoconf calls).
619 * My declaration of initgroups() in slocal.c to eliminate the "no
620 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
621 use AC_EGREP_HEADER to see where initgroups() is declared, if
624 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
626 * Fix security hole in mhshowsbr.c which allowed untrusted shell
629 * Released nmh 1.0.3.
631 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
633 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
634 be surrounded by single quotes, as a shell is not spawned when
635 just saving files, and the filenames will end up with literal
636 quotes embedded in them.
638 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
640 * Whoever originally added the -help switch to all the commands
641 got too cute and had the option itself print out as "-(help)" in
642 the -help output. One theory is that they were making reference
643 to the fact that clearly you know about the -help option since
644 you're currently looking at its output. I think it's a bad idea
645 to overload the meaning of the parentheses, however -- they're
646 supposed to indicate what abbreviated prefix of the switch you're
649 The other theory is that because you can say something like
650 "mhstore -" and get "mhstore: - ambiguous. It matches" followed
651 by the same list of switches you get with -help, they were saying
652 you can "sorta" abbreviate "-help" as "-". You don't get the
653 "Usage:" string, though, so it's not really the same thing.
655 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
657 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
659 The following patch fixes a problem with requesting a
660 service key for a machine that has multiple 'A' records. It
661 also makes "-kpop" a command line option, for users who
662 would like to use both "kpop" and "pop".
664 Did no testing of the new features, as I don't have access to a
667 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
669 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
671 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
673 * All %-escapes in mhn.defaults that actually expand to something
674 should be surrounded by single quotes. Added quotes to the ones
675 in mhn.defaults.sh that were missing them.
677 * Added check for lynx to write mhshow-show-text/html line in
680 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
682 * makedir() had multiple bugs dating back to MH. An octal
683 constant was apparently being interpreted as decimal, resulting in
684 directories with no user read or execute permissions, making
685 nested directory creation fail. And there wasn't even an
686 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
687 in .mh_profile) on the outer directories of a nested directory.
689 * A second `make install' would always fail because the check for
690 whether mh_profile.5 existed was written incorrectly.
692 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
694 * Added documentation on both types of masquerading to post's man
697 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
699 * Doug's portability fix of my setgid inc autodetection had a
700 caching bug -- if you re-ran configure, uip/Makefile would be
701 corrupted, and installation would bomb out on OSes where inc needs
704 * Implemented a new kind of email address masquerading. Usually,
705 when a user writes a custom "From:" header in a draft, nmh uses it
706 rather than generating one. However, the user's true address is
707 used in the SMTP envelope "From:" and is revealed in the "Sender:"
708 header. Now, when mmailid is set to non-zero, the envelope
709 "From:" uses the address specified in the draft "From:" header,
710 and there is no "Sender:" header. This is useful when sending on
711 behalf of a remote POP3 account or when remote mail robots
712 incorrectly use the envelope "From:" in preference to the body
713 "From:". This processing has only been implemented for post, not
714 for the undocumented spost (which was already missing some "From:"
715 processing that post has).
717 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
719 * Got rid of the rest of the gcc -Wall warnings that I didn't have
720 time for on 1999-07-15 (and, it would seem, some new ones people
721 introduced since then). The primary ones were the warnings that
722 default prototypes were being used for [v]snprintf() and
723 str[n]casecmp(). As of right now, there are _no_ compilation
724 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
727 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
729 * Move mhtest from bindir to libdir.
731 * Move sendfiles from libdir to bindir.
733 * Updated sendfiles manpage to reflect this change.
735 * Added documentation for -build and -file switches to repl and
736 forw manpages (patch from Peter Maydell).
738 * Fixed interaction between specifying -cc in profile and -group on
741 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
743 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
744 not unanimous support for my proposed even/odd release/developer
745 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
748 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
750 * Upped the version number to 1.0.3. If we don't do this, then
751 when people report bugs against 1.0.2, we won't know "which" 1.0.2
752 they're talking about (since the development source is publically
753 available via CVS). I think the Linux kernel version numbers are
754 a good model, so the next time we roll a tarball, it should be
755 version 1.0.4 (or higher -- anyhow, an even-numbered version).
757 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
759 * Released nmh-1.0.2.
761 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
763 * Added check for whether "libtool" is in fact gnu libtool. If
764 it is, it is not used. This is the wrong behavior. If vendor
765 XYZ later on decides to create yet another libtool, we'll be
766 caught again. This works for now.
768 * Minor updates to MACHINES refering to Mac OS X.
770 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
772 * Added check for "libtool" (a ranlib type tool for Mac OS X)
773 and modified Makefiles so that nmh will build under Mac OS X.
775 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
777 * Changed repl defaults to partly revert to MH behaviour,
778 "-cc all" is now only implied with -group.
780 * The replcomps template includes cc: header again (as in MH).
782 * Updated repl man page to reflect these changes.
784 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
786 * Tweaked configure to handle Solaris and SunOS after the BIND
787 changes. Both need more cleanup.
789 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
791 * Removed BIND define and replaced it with a check for
792 gethostbyname (to determine if the host is DNS aware) and a
793 check for sethostent. This appears to be the right thing to
794 do, but there is no explanation of the reasoning behind the
795 BIND define in the code and it appears to have been used for
798 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
800 * Updated manpages Makefile to link mh-profile.5 to
801 mh_profile.5 after installation. Suggestion from Richard Cohen
802 <richard@jubjub.demon.co.uk>.
804 * Modified configure.in to check for _IO_write_ptr and libio.h
805 to determine whether to define LINUX_STDIO instead of using
808 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
810 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
811 multiple machines in the past where the mail spool was a symlink
812 to a directory on another device with more free space.
814 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
816 * Fixed a portability problem in Doug's fix of a portability
817 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
819 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
821 * Added config.sub and config.guess to the list of files to be
824 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
825 added if a list of addresses was split over several header lines.
827 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
828 macros, regardless of platform.
830 * Allow q to quit mhshow, and n to skip to next part. Patch from
831 Kimmo Suominen <kim@tac.nyc.ny.us>.
833 * Modified mhstore to recognize attachments created by sendfiles
834 with x-conversions=gzip.
836 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
838 * added explicit cast to long from time_t for tclock in
841 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
842 it's needed for ioctl() anyway. This prevents a warning about
843 implicit definition of ioctl().
845 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
846 "User Configuration" section of config.h (moved @TOP@ in
847 acconfig.h) so they're easier to find, should someone actually
848 want to mess with them.
850 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
852 * updated Makefile.in so it recognized COMPLETION-TCSH and
853 COMPLETION-ZSH (only used in make nmhdist).
855 * added prototype for ruserpas to <h/prototypes.h>. Fixes
856 warnings in mhparse.c and mhbuildsbr.c.
858 * added include checks for <time.h> and <sys/time.h> to
859 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
860 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
862 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
863 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
864 warnings about implicit definition of mts_init().
866 * added <grps.h> to slocal.c to prevent warnings about
869 * added <h/signals.h> to prevent warning about missing SIGNAL
872 * added function prototypes to smtp.c, whatnowproc.c,
873 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
876 * explicitly declared mbx_style in mshcmds.c and lused in
877 fmtdump.c as type static int instead of just static to
880 * various code cleanups to prevent ambiguous statements
881 (brackets for if/thens and parens for complicated if
885 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
887 * commented out _cleanup() in mf.c because it's the only
888 location in all of the source code where it exists. It was
889 preventing compilation on at least linux.
891 * Added check for <db1/ndbm.h> which is the new location where
892 linux systems appear to be stuffing this header file.
894 Thu Sep 09 23:15:49 1999 Doug Morris <doug@mhost.com>
896 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
898 * added mh_profile SEGV patch from Richard Cohen
899 <richard@jubjub.demon.co.uk> that prevents crashing when
900 mh_profile doesn't end in a newline. A similar patch was
901 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
903 * fixed bug in associated with MAILGROUP #define (group "mail"
904 is not universal) -- hard to believe, but true.
906 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
908 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
910 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
912 * Automated #define of MAILGROUP and installation of inc as setgid mail
913 when the mail spool directory isn't world-writable.
915 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
917 * slocal -debug used to leave a file in /tmp for each message
918 processed. Very bad for folks with slocal -debug in their .forward!
920 * Got rid of a ton of compilation warnings. Most were "junk"
921 warnings due to the use of gcc -Wall (without -Wno-parentheses),
922 but a few represented real bugs. There remain many warnings to be
923 tackled that are due to missing function prototypes (e.g. snprintf()).
925 * Default rcvdistcomps no longer puts a copy of all outgoing
926 messages in outbox. Added an rcvdistcomps.outbox that does.
928 Sat Jun 09 12:22:47 1999 Doug Morris <doug@mhost.com>
930 * Updated configure to check for mkstemp (available on OpenBSD) and
931 substitute it for mktemp if available.
933 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
935 * Added config.sub and config.guess and updated acconfig.h and
936 configure.in to automatically detect system type and set the
939 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
941 * Released nmh-1.0.1.
943 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
945 * Fixed flist to properly deal with relative folder names.
946 Problem noted by Jerry Peek <jpeek@jpeek.com>.
948 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
949 well as the Kerberos 5 compat libraries. Based on a patch from
950 Assar Westerlund <assar@sics.se>.
952 * Added a check in configure.in to test if modf is in libc and
953 link with libm if not. This is needed by at least Digital UNIX.
954 Problem pointed out by Kevin Oberman <oberman@es.net>.
956 * Fix a bug from the "mhn -show" to "mhshow" renaming that
957 made the "list" command in whatnow not work for some users.
958 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
960 * Replaced "extern int errno" with "#include <errno.h>" in a
961 number of files. Suggested by Stephen Wilson Bailey
964 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
965 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
967 * Fixed a segmentation fault in inc. Patch originally from Ruud de
968 Rooij <r.c.m.derooij@twi.tudelft.nl>.
970 * Allow display of 8bit encoded messages. From Kimmo Suominen
973 * Fixed repl to not add line breaks in the middle of long
974 addresses when building a reply. From Ruud de Rooij
975 <r.c.m.derooij@twi.tudelft.nl>.
977 * Added -library switch to spost so it can parse user aliases like
978 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
980 * Changed configure.in's check for sigsetjmp to properly deal
981 with systems like Linux where it is a macro. From
982 <elleron@servtech.com>.
984 * Fixed a bug in whatnow that could cause it to sometimes exit
985 without prompting the user. Based on a patch by Richard Geiger
988 * Added code to deal with SIGPIPE in mhl so it doesn't print
989 "Broken pipe" if you quit out of the moreproc.
991 * Documentation: Added a note to MACHINES about Irix make. Added a
992 pointer to the online copy of the MH book in INSTALL. Added
993 some additional information to the whatnow and packf man pages,
994 suggested by Jerry Peek <jpeek@jpeek.com>.
996 * Updated INSTALL, FAQ, etc to not refer to Richard as the
997 maintainer or math.gatech.edu as the home any more.
999 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
1003 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
1004 mbx_open so that the mode of zero length maildrops
1005 would not be changed.
1007 * Replaced the substitute version of snprintf() with the
1008 one from the Apache web server.
1010 * Changed to default mode for creating new messages to 0600
1011 (this should have been done a long time ago).
1013 * Changed "flist" to handle searching for multiple sequences
1014 for each folder. Also flist will now correctly split
1015 Unseen-Sequence if it consists of multiple sequences.
1017 * Added new switches `-unlink' and `-nounlink' to "refile".
1019 * Added new switches `-unlink' and `-nounlink' to "rmm".
1021 * More cleanups of slocal output. Changed adorn() to
1022 send to stdout, instead of stderr (to match rest of
1025 * Merged mbx_create() into mbx_open, so that creating and
1026 opening a nonexistent maildrop is done atomically. This
1027 removes a bad race condition.
1029 * Fixed bug that caused slocal to be unable to save to MMDF
1032 * Added new wrapper function usr_folder() to slocal.c to
1033 handle adding message to folder (currently, it still uses
1034 usr_pipe() to call rcvstore).
1036 * seq_list() checks for empty folder before scanning for
1037 sequence information.
1039 * num_digits() in flist.c and folder.c now returns correct
1040 value for 0. Also added sanity check.
1042 * folder_delmsgs() now correctly decrements internal message
1045 * Don't attempt to read sequence information if folder
1048 * Split seq_read into seq_public and seq_private.
1050 * Small change to sigmsg.awk, since newer versions of gawk
1051 interpret 034 as octal.
1053 * In flist, don't scan for sequence information in empty folder.
1055 * Updated mhn.defaults.sh to output profile entries for mhshow,
1056 mhstore, and mhbuild.
1058 * Changed configuration parameter "mhn-access-ftp" to
1059 "nmh-access-ftp". Updated man pages
1061 * Moved the code in InitMultipart to reverse the order of the
1062 parts in a multipart, into its own function "reverse_parts()".
1064 * Changed code in mhbuildsbr.c to store unencoded content
1065 in the c_cefile structure when building.
1067 * Changed code in mhoutsbr.c to look for unencoded content
1068 in the c_cefile structure when outputing message.
1070 * Changed configuration parameter "mhn-cache" and
1071 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
1072 since it is used in mhstore, mhlist, and mhshow. Updated man pages
1074 * Change configuration parameter "mhn-storage" to
1075 "nmh-storage", since it is now used in mhstore, mhlist,
1076 and mhshow. Updated man pages
1078 * Add autoconf support for KPOP (kerberized pop).
1080 * Add autoconf support for Hesiod.
1082 * Split routines to output a message given a Content structure
1083 (output_message, output_content, write7Bit, etc..) to a new
1086 * Split output_content(), into output_content() and build_headers().
1088 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
1089 list of header fields, rather than reopening the message.
1091 * Added free_header() to mhfree.c to free structures containing
1092 header field information.
1094 * Changed get_content() to use the linked list of header fields
1095 when parsing the various MIME headers (Content-XXX).
1097 * Changed get_content() to store linked list of header field
1098 values when parsing a content.
1100 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
1101 routines in mhcachesbr.c to handle the content cache.
1103 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
1104 cache_content) into new file mhcachesbr.c.
1106 * More calls to sprintf/strcpy (primarily in mhparse.c
1107 and mhbuildsbr.c) converted to snprintf/strncpy.
1109 * When a message is displayed with `mhshow', it is now
1110 removed from the "unseen" sequence.
1112 * Change the default "showmimeproc" to "mhshow".
1114 * Split "mhn -show" off into separate command "mhshow".
1116 * Split "mhn -store" off into separate command "mhstore".
1118 * Split "mhn -list" off into separate command "mhlist".
1120 * Add sanity checks to context_find(), context_replace(),
1121 and context_del(), to abort if context file hasn't been
1124 * Add calls to context_read(), to the beginning of all nmh
1125 commands (instead of being called indirectly by context_find).
1127 * Changes the "substitute" version of vsnprintf/snprintf for
1128 operating systems without native versions, to just call the
1129 native vsprintf(), and ignore the buffer length. This is
1130 faster, but less secure than the previous version that used
1131 temporary files. This should only be a problem for systems
1132 which do not have a native snprintf(), and require `inc' to
1135 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
1137 * Changes client() routine to take additional parameter, which is
1138 the buffer length of the parameter "response". Then added
1139 buffer length checks for this parameter.
1141 * Changed getws() to get_fields(), since that is apparently the
1142 name of a wide character version of gets() on some archetitures.
1144 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
1146 * Change the code in most of the commands that take multiple
1147 message names/sequences/ranges on the command, such that
1148 the msgs array is expanded dynamically. This removes most
1149 of the limits on the length of command lines.
1151 * Add additional parameter to copyip(), to specify the
1152 maximum number of strings that can be copied (security
1155 * Create new function getarguments(), to massage the argument
1156 vector before parsing it (add any arguments from your
1157 profile to the beginning of the argument vector). This
1158 also removed the general limit on the number of command line
1161 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
1163 * Released nmh-0.27.
1165 * Added a new command "delete", that is available during
1166 a "whatnow" session. It is equivalent to "quit -delete".
1168 * Added another parameter to editfile (in whatnowsbr.c),
1169 that controls whether editfile should remember the last
1170 program that was exec'ed. This way the whatnow command
1171 "mime", will not be re-executed if "edit" is later given
1174 * Changed whatnowsbr.c, so that whatnow doesn't abort if
1175 mhbuild returns an error.
1177 * Added parameter to sendsbr(), so you may specify whether to
1178 rename the draft file.
1180 * Pass delay time to splitmsg() as a parameter, rather than
1181 use a global variable.
1183 * Moved code to rename draft file after sending message from
1184 splitmsg and sendaux, to sendsbr.
1186 * Removed all the code in viamail to split messages and then
1187 mail them. Replaced this with the standard sendsbr.c routines.
1189 * Changed sendsbr(), so that when splitting messages into
1190 messages of type "message/partial", the header fields that
1191 are copied are more compliant with RFC-2046.
1193 * Fixed mhbuild to track temporary files better. They are
1194 now correctly removed when mhbuild aborts.
1196 * Created a new man page for "sendfiles". The information
1197 about "mhn -viamail" in the "mhn" man page was moved to
1200 * Changed the name of the "viamail" shell script to
1201 "sendfiles". Modified "sendfiles" to use the new
1204 * Moved the functionality for "mhn -viamail" out of mhn,
1205 and into a separate executable called "viamail".
1207 * When storing MIME contents to a folder using mhn -store,
1208 they are now accumulated in a temporary file, and then added
1209 to the folder using folder_addmsg().
1211 * Moved code to save content to a folder from store_content
1212 to new function output_content_folder.
1214 * Moved code to save content to file from store_content to
1215 new function output_content_file.
1217 * Moved code to parse storage format string from store_content
1218 to new function parse_format_string.
1220 * Fix copy_some_headers() in mhstoresbr.c, so that the
1221 correct header fields in the first enclosing message/partial
1222 will be copied (according to RFC2046), when using mhn -store
1223 to reassemble messages of type message/partial.
1225 * Fixed bug to openFTP() in mhparse.c, that caused the
1226 tmp file to not be removed, when transferring a
1227 message/external file from ftp.
1229 * Moved the code in mhparse.c to process -auto switch (scan
1230 contents for the attribute "name"), to a new function
1231 "get_storeproc" in mhstoresbr.c.
1233 * Moved routines to free data structures related to MIME
1234 content from mhparse.c and mhbuildsbr.c, to new file
1237 * Moved code to show/display MIME content into new
1240 * Moved code to store MIME content from into
1241 new file mhstoresbr.c
1243 * Moved code to parse MIME content into new
1246 * Moved code to list information about MIME content
1247 into new file mhlistsbr.c.
1249 * Move part_ok(), type_ok(), content_error(), flush_errors(),
1250 and set_endian() to new file mhmisc.c.
1252 * Start to isolate the code to show, list, and store MIME
1253 messages. One side effect is that only one flag (-show,
1254 -list, or -store) can be used at a time now.
1256 * mhn -store -auto wasn't storing file in correct directory.
1258 * Removed a few dead variables from sbr/ruserpass.c
1260 * move code for creating tmp files, and renaming the
1261 the composition draft in mhbuild, from build_mime()
1264 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
1265 the -[no]auto switch (which isn't used in mhbuild).
1267 * split mhn.c into mhn.c and mhnsbr.c (name later changed
1270 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
1272 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
1274 * Released nmh-0.26.
1276 * Added (unlisted) options [no]dashstuffing to send, post,
1277 and whatnow to determine whether to do RFC934 quoting
1278 (dashstuffing) for encapsulated BCC messages. The default
1279 is still the same (dashstuffing).
1281 * Changed the undocumented feature "nodashmunging" in forw
1282 and mhl, into the documented feature "nodashstuffing". The
1283 default for forw, is still "dashstuffing" for backward
1284 compatibility, although I don't believe that bursting
1285 RFC934 digests is very common anymore.
1287 * Added an option to define REALLYDUMB in the default config.h.
1288 But it is not on by default.
1290 * moved creation of config file mts.conf from zotnet/mts
1291 to etc. This simplified the Makefile in zotnet/mts.
1293 * simplified directory support/general to etc.
1295 * removed unneeded directory support/bboards.
1297 * split getusername() into getusername() and getuserinfo().
1299 * Changed getusr() routine to getusername().
1301 * Slight cleanup in folder_pack.c on code that records the new
1302 number of the "cur" message when packing.
1304 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
1306 * Released nmh-0.25.
1308 * Change install process, so that hard linking the correct mts
1309 library to libmts.a, is not necessary. The final link process
1310 uses the original name of the library.
1312 * Fixed bug in flist.c and folder.c, so that symbolic links which
1313 point to directories, will not decrement the number of directory
1316 * Split the function list_content (in mhn.c and mhbuild.c) into
1317 list_content and list_debug.
1319 * Don't pack (folder -pack) an empty folder.
1321 * Exit gracefully in flist.c, if no sequence is specified,
1322 and no "Unseen-Sequence" is given in nmh profile.
1324 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
1326 * Released nmh-0.24.
1328 * Small clarification to the man page for `ali'.
1330 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
1331 are given, that order doesn't matter.
1333 * Fix bug in seq_list.c when realloc'ing for
1334 large sequence line.
1336 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
1338 * Released nmh-0.23.
1340 * Add new section on "Transfer Encodings" to man page for mhbuild.
1342 * In mhbuild.c, split compose_content into compose_content
1343 (parse and execute composition string), and scan_content (scan
1344 content, decided transfer encoding, check for clash with boundary
1345 string). I did a good amount of rearranging of this code.
1347 * Moved definitions for data structures for parsing MIME
1348 messages from mhn.c and mhbuild.c to a new include
1351 * Small amount of rearranging in sendsbr.c
1353 * Small changes to MAIL.FILTERING file.
1355 * Add the file MAIL.FILTERING to nmh distribution.
1357 * Add line to packf so that if message begins with
1358 "X-Envelope-From:" field, it is converted to "From ".
1360 * Fix packf to add "From " line to beginning of message,
1361 even if Return-Path doesn't exist.
1363 * Add note to MACHINES file that on Linux, configure
1364 doesn't find the functions sigsetjmp/siglongjmp.
1366 * Fix configuration for machines that don't have (or find)
1367 sigsetjmp/siglongjmp.
1369 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
1371 * Released nmh-0.22.
1373 * Add a configure check for sigsetjmp. Add some conditional
1374 #define's in h/signals.h in case it's not found.
1376 * Added additional notes about -auto switch in mhn man page.
1378 * Added note about MM_CHARSET environment variable to
1379 mh-profile(5) man page.
1381 * Fix signal problem in mhn.c (change setjmp/longjmp to
1382 sigsetjmp/siglongjmp).
1384 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
1386 * Released nmh-0.22-pre1.
1388 * Changed the first line in mhl.format from
1389 " -- using template mhl.format -- " to a blank line.
1391 * Added note about automimeproc to mh-profile man page.
1393 * Reorganize the main entry point for parsing a MIME message
1394 or file in mhn. Add new function parse_file() as new main
1395 entry point for parsing MIME files.
1397 * Add note to mhn man page, that "mhn -file -" will accept the
1398 source message on the standard input.
1400 * Changed a sanity check in folder_realloc that was too strict.
1402 * -norfc934mode is now the default for mhbuild,
1403 rather than -rfc934mode.
1405 * Fix mhbuild, so that Content-Description and RFC-822 comments
1406 from #forw directive will be correctly included if there is
1409 * Change mhn to correctly default parts of multipart/digest to
1410 message/rfc822 (leftover code from rfc934mode was removed).
1412 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
1415 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1417 * Released nmh-0.21.
1419 * If the file given to mhbuild is "-", then accept the draft on
1420 standard input, and output the MIME message to standard output.
1422 * Cleaned up code in mhbuild.c that decides what transfer
1425 * Cleaned up code in mhbuild.c that decides what character set
1426 to use for text contents.
1428 * Removed old hpux specific code from zotnet/tws/lexstring.c
1430 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1432 * Released nmh-0.21-pre2.
1434 * Added the "decode" variable to mhl.format and mhl.header.
1436 * Added new variable "decode" to mhlsbr.c to decode text in
1437 header fields as per RFC-2047.
1439 * Make sure that when decoding RFC-2047 header fields, that any
1440 spaces at the ends of the encoded text are not ignored, but the
1441 spaces between encoded word are.
1443 * Removed #ifdef's for MIME. MIME support is always compiled in.
1445 * scan/inc will now decode both Subject and From lines as
1446 RFC-2047 encoded header fields.
1448 * Added new function write_charset_8bit() to sbr. It returns
1449 the character set to use for 8bit text in composition draft.
1450 Changed mhbuild to use this function.
1452 * Split mhn man page into man pages for mhn and mhbuild.
1454 * mhn -show will only now only use default method for content
1455 of type plain, if it is NOT a part of a multipart/alternative.
1457 * Split mhn -build into mhbuild. Did some code cleanup.
1459 * Added support for %(decode) to fmtdump.c.
1461 * check_charset() now accepts US-ASCII as a subset of any
1462 ISO-8859-X character set.
1464 * Changed the default "showproc" to mhl, instead of the
1467 * When reading file into mhn composition file, only need read
1468 permissions, not write permissions.
1470 * Added own version of strcasecmp to distribution, since
1471 nmh calls it frequently with NULL pointers (ughh).
1473 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1476 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1478 * Released nmh-0.21-pre1.
1480 * If a message is missing charset parameter to text/plain, show
1481 will assume US-ASCII, rather than just calling showmimeproc.
1483 * Change show.c and mshcmds.c to use check_charset to see if text
1484 message contains valid character set.
1486 * Added new scan format file "scan.nomime" to support/general
1487 that doesn't do any RFC-2047 decoding.
1489 * Modified all the scan format files in support/general to do
1490 RFC-2047 decoding of Subject field.
1492 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1493 ignore whitespace between two valid encoded words, but not
1494 between an encoded word and normal text.
1496 * Created new file sbr/check_charset.c. Moved code from
1497 fmt_rfc2047.c to check for valid character set to this file.
1499 * Added format escape %(decode) to decode contents of "str" register
1500 as a RFC-2047 header field.
1502 * The command install-mh now recognizes the switches -version
1505 * Added a new argument to print_help.c to decide whether to
1506 print profile entries (needed for install-mh to prevent weird
1509 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1510 is initialize to max (mp->lowmsg, 1) rather than always 1.
1512 * Changed macros for sequence/attribute manipulation so that
1513 message status array doesn't need to always start at 1.
1515 * Small cleanups in folder_realloc().
1517 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1519 * Released nmh-0.20.
1521 * Added configure option --with-pager=PAGER.
1523 * Added configure option --with-editor=EDITOR.
1525 * Changed the default format file for mhl (mhl.format) to
1526 also ignore (not display) the header fields Content-Type,
1527 Content-Transfer-Encoding, and Content-ID
1529 * Fixed core dump in addrsbr.c when using %(proper) format function
1530 and the To: line was missing.
1532 * Added the file ZSH.COMPLETION to the distribution.
1534 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1536 * Released nmh-0.20-pre2.
1538 * Added new switch -snoop to both `msgchk' and `inc', so you can
1539 watch the POP transaction.
1541 * Changed "replgroupcomps" to check for Mail-Followup-To header
1542 first, and use it if available.
1544 * Changed "replcomps" to check for Mail-Reply-To header
1545 first, and use it if available.
1547 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1549 * Released nmh-0.20-pre1.
1551 * Changed seq_list.c to dynamically enlarge the buffer for
1552 collecting the message ranges in a long sequence line.
1553 This should remove the last hard limit on the size of a
1556 * Changed seq_read.c so that can read long sequence lines.
1557 It will use multiple calls to m_getfld() when m_getfld()
1558 returns the state FLDPLUS.
1560 * Changed brkstring.c to dynamically add more space for pointers
1561 if necessary. This is needed when splitting up large sequence
1564 * Did some small cleanups in seq_save.c.
1566 * Added new switches `-[no]unseen' to rcvstore, to control
1567 whether new messages are added to Unseen-Sequence.
1569 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1571 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1572 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1574 * Changed "replcomps" to not include CC and TO lines so that
1575 that reply message is only directed at the author of the
1576 message to which you are replying.
1578 * Added new switch `-group' to command repl, which causes repl
1579 to use new forms file "replgroupcomps". This is intended for
1580 making group replies.
1582 * Removed #ifdef for ATHENA.
1584 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1586 * Released nmh-0.19.
1588 * Fix repl,forw so that switch `-form file' will not abort
1589 as ambiguious (silly mistake on my part).
1591 * Cleaned up the mhn man page. Added info about a few escapes
1592 for the formatting/display strings that were not documented
1593 (%%, %t). Moved the BNF grammar for the mime composition file,
1594 to the end of the man page.
1596 * Added the options -[no]format to the command repl. The
1597 switch `-format' will filter the message to which you are
1598 replying with the standard message filter "mhl.reply", which
1599 is now included in the distribution. The `-noformat' option
1600 will negate the use of -format or -filter and not include
1601 the message to which you are replying in the draft.
1603 * Did some cleaning and reorganization on many of the man
1606 * Added debugging switch `-debug' to mhparam, which displays
1607 the values of all `procs' (and some other misc configuration
1608 info) that nmh keeps in global variables.
1610 * When using `refile -preserve', if a conflict occurs, then use
1611 the next available number above the message number you wish
1614 * In forw.c, split the code for creating MIME style forwarding
1615 out of copy_draft, and into copy_mime_draft.
1617 * Move routines in mark.c to print sequences, into new
1618 file sbr/seq_print.c
1620 * flist will now update the current folder.
1622 * Added the switches -[no]fast to flist, to replace
1623 -[no]total. The previous switches are still accepted
1624 but now undocumented.
1626 * More reorganization in flist of the code for
1629 * The command "flist +foo -all" will now scan the folder
1630 "foo" and all its 1st level children.
1632 * Add missing include file <h/mh.h> to sbr/snprintf.c
1634 * Fix alarm bug in rcvtty, so that when it calls external
1635 process, the alarm is never longer than 30 minutes.
1637 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1639 * Released nmh-0.18.
1641 * Fixed bug in mark, so that "mark -list -seq foo" will
1642 correctly indicate if "foo" is a private sequence. I found
1643 this bug mentioned in Jerry Peek's book.
1645 * Simplified the code in seq_setcur(), since seq_addmsg() now
1646 retains the public/private status of sequences.
1648 * Changed sequence handling so that if the switches -public
1649 or -nopublic, are not specified for the commands mark, pick,
1650 or rcvstore, then existing sequences will retain their
1651 previous public/private status.
1653 * mhparam now handles the mh-sequences profile entry
1656 * flist -all will now also check readonly folders (for
1659 * Improve the leaf optimization for folder command.
1660 It will now track the number of directories in a folder,
1661 and stop stat'ing files once it has hit all the subfolders.
1663 * Renamed m_getfolder to getfolder. Changed getfolder to
1664 take option to determine whether it should get current
1665 folder, or just default folder (Inbox). Changed rcvstore,
1666 inc, and rmf to use the new getfolder.
1668 * flist now indicates if a sequence is private.
1670 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1671 wait for stopped processes.
1673 * conflict will dynamically allocate space for group names,
1674 so it can now handle system with more than 100 groups.
1676 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1678 * Released nmh-0.18-pre4.
1680 * Check if we have enough message status space, before we
1681 call folder_realloc() in burst, mhpath, and m_draft().
1683 * mhn will now correctly identify a formatting string of "-"
1684 for the option -store, and send content to stdout.
1686 * Change the way that memory for message status is
1687 allocated. It is dynamcially allocated separately from
1688 the folder/message structure. This required changing
1689 folder_read.c, folder_realloc.c, folder_free.c.
1691 * Removed all the MTR code (experimental code for message
1694 * Renamed m_readfolder.c to folder_read.c and simplified
1697 * Renamed m_freefolder.c to folder_free.c.
1699 * Add function trim() to slocal.c to pretty print
1700 the debugging output.
1702 * Changed the name of m_packfolder() to folder_pack().
1703 Changed the name of m_remsg() to folder_realloc().
1705 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1707 * Released nmh-0.18-pre3.
1709 * Changed installation to add `flists' which is hard linked
1710 to `flist'. This is a equivalent to `flist -all'.
1712 * For flist, -showzero is on by default.
1714 * Major changes to flist. Default is now for flist to search
1715 current folder. The switch `-all' is now used to specify
1716 searching all top level folders. The new switch `-showzero'
1717 is used to print out folders that don't contain any messages
1718 in the given sequence.
1720 * Split BuildFolderList in flist.c into 2 functions
1721 (BuildFolderList, BuildFolderListR). Changed these functions
1722 so that flist now does better leaf optimization, and will stop
1723 stat'ing directory entries when it knows it has hit all the
1724 subdirectories of a given directory.
1726 * Reorganized code in folder.c, so that all relevant folders
1727 are scanned first and information recorded. Then all the
1728 folder summaries at printed out at one time.
1730 * Made the options of folder(s) more orthogonal. Now
1731 "folder -all -noheader -nototal" will do the right thing.
1733 * Added `-noall' switch to folder, for completeness.
1735 * Changed the default mode for creation of new folders
1738 * Slightly changed the format for flist. It now indicates
1739 if a folder is current. Also the width of the various
1740 fields are now calculated at runtime.
1742 * Changed the format for folder(s). Folder names
1743 are now left justified. The width of the various fields
1744 are calculated at runtime.
1746 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1748 * Released nmh-0.18-pre2.
1750 * Add paragraph to man page for install-mh and to INSTALL file
1751 about checking for global mh.profile.
1753 * Renamed m_find() to context_find().
1754 Renamed m_replace() to context_replace().
1755 Renamed m_delete() to context_del().
1756 Renamed m_update() to context_save().
1757 Renamed m_getdefs() to context_read().
1758 Renamed m_foil() to context_foil().
1760 * Change rcvstore to use routine folder_addmsg(), instead of
1761 adding message to folder itself.
1763 * Changed refile, so that if the switch -preserve is used,
1764 and a conflict occurs for a particular folder, then folder_addmsg()
1765 will just use next highest available number for that folder,
1768 * Make folder_addmsg() more robust. It will make repeated
1769 attempts to link file into folder if link returns with
1772 * Fix bug, so that that if forking sendmail, HELO will be sent
1773 unless clientname: option is defined but empty (so now it
1774 is the same as the direct smtp code).
1776 * Changed sprintb to snprintb (now we pass the buffer length
1777 to new routine). Changed code to use new function.
1779 * Added snprintf to sbr. Added configure check to build it
1780 if you don't have a native version (but haven't changed much
1781 code to use it yet).
1783 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1785 * Released nmh-0.18-pre1.
1787 * Fixed alarm bug in slocal, so that alarm is never
1788 called with a value larger than 30 mintues.
1790 * Fixed race condition in rmm and refile, so that
1791 context is updated before external rmmproc is called.
1793 * Removed all the OVERHEAD code.
1795 * Move code to add message to folder from refile.c
1798 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1800 * Did some rearranging of the internals of inc.c.
1802 * Make -inplace the default for anno, forw, dist, and repl.
1804 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1806 * Created new directory mts/sendmail for direct sendmail
1807 interface (although it currently still uses SMTP).
1809 * Removed all the TMA (trusted mail agent) code
1811 * Removed all the TTYD (terminal access daemon) code
1813 * Removed all the MF (uucp filtering) code.
1815 * Removed all the code for BERK.
1817 * Removed all the code for stand-alone delivery (MHMTS).
1819 * Split the file mts/sendmail/smail.c into sendmail.c and
1820 smtp.c. Changed the name of the directory to mts/smtp.
1822 * Changed autoconf to use @sysconfdir@ for location of
1823 configuration files.
1825 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1827 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1829 * Released nmh-0.17.
1831 * MAKEDEFS weren't passed down to recursive makes correctly.
1833 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1834 of hard-coding "/etc/utmp".
1836 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1839 * Remove configure checks for ulong and ushort. Changed
1840 code to just use unsigned {short, long}.
1842 * Change addmsg function in refile.c to return new
1843 number of refiled message.
1845 * Added check in get_returnpath for empty unixbuf.
1847 * Cleanup of sbr/pidstatus to use more POSIX macros
1848 for return value of wait().
1850 * Change configure to also check /bin for "more".
1852 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1854 * Released nmh-0.16.
1856 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1858 * Added automimeproc, which should replace automhnproc.
1860 * multipart messages will no longer abort for messages
1861 of type 8bit or binary (although we still can't really
1862 deal with binary messages, yet).
1864 * Fix double free of c_storage. From John MacMillan.
1866 * mhn now treats unknown subtypes of "text" as text/plain.
1868 * mhn changed so that specifying mhn-show-multipart, or
1869 mhn-show-multipart/{mixed, alternate, etc...) will override
1870 the use of the internal method for displaying these types.
1871 Previously mhn would always use the internal method for subtypes
1872 mixed, alternate, digest, and parallel (even if an alternate
1873 method was specified in mhn.defaults).
1875 * mhn show treats unknown subtypes of multipart, as type
1876 multipart/mixed (as specified RFC2046).
1878 * mhn checks for the parameter "name" rather than "x-name".
1879 From MH-6.8.4 patch.
1881 * Fix double free of ctinfo in user_content when using
1882 #forw with single message. From John MacMillan (and
1885 * Changed -mhnproc switch for show, to -showmimeproc.
1887 * Changed profile entry "mhnproc" to "showmimeproc".
1889 * Added "mime" option to "whatnow", which calls the program
1890 "buildmimeproc" (default is mhn -build) to process MIME
1893 * Added -build switch to mhn, to process MIME composition
1896 * Did some reorganizing of mhn.c.
1898 * Changed casting in mts/sendmail/smail.c from (char) to
1899 (signed char) so SMTP reply codes work correctly for machines
1900 which used unsigned chars by default.
1902 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1904 * Released nmh-0.15.
1906 * Added new form "scan.unseen" to distribution. It marks messages
1907 which are in any sequence in Unseen-Sequence.
1909 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1911 * Fix sign extension bugs in fmt_scan.c.
1913 * Fix m_atoi.c so that strings ending in non-digit characters
1916 * Split code in burst.c so that finding delimiters of digested
1917 messages and bursting a message into multiple messages are
1918 two separate functions (find_delim and burst).
1920 * Add workaround fo AC_PATH_PROG in configure.in, so
1921 that BSD4.4 machines can find sendmail, vi, more.
1923 * Added "-width" option to rcvtty.
1925 * Change a few variable names in zotnet/mts/client.c since
1926 they conflict with defines on AIX.
1928 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1929 unsuccessful if resulting file is less than 500 lines long
1930 (rather than 10, which was previous value), since AIX
1931 sed gives mangled file of about 200 lines.
1933 * Extract code in rcvstore.c to link message into folder,
1934 and put in own subroutine.
1936 * Extract code in refile.c to link message into folder,
1937 and put in own subroutine.
1939 * Moved code to remove messages from folder into own
1940 routine "folder_delmsgs" in sbr. Changed rmm.c and
1941 refile.c to use new routine.
1943 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1945 * Renamed m_seqok to seq_nameok.
1947 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1950 * Changed m_seqflag to return the number of a sequence rather
1951 than its bit flag. Changed its name to seq_getnum and renamed
1952 file to sbr/seq_getnum.c.
1954 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1957 * Added zero switch to m_seqadd function to zero out bits before
1958 adding message to sequence.
1960 * Renamed function m_setvis to m_setunseen, and renamed
1961 corresponding file in sbr.
1963 * Renamed function m_setseq to m_setprev, and renamed corresponding
1966 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1968 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1969 all selected messages from a sequence.
1971 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1972 selected messages to a sequence.
1974 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1977 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1979 * Renamed function pack_folder to m_packfolder, and moved it
1980 from uip/folder.c into its own file sbr/m_packfolder.c
1982 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1984 * Changed function m_gmsg to m_readfolder. Renamed file
1985 sbr/m_gmsg.c to sbr/m_readfolder.c.
1987 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1989 * Expanded rcvtty man page, and added small patch from
1990 MH-6.8.4 distribution.
1992 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1994 * Released nmh-0.14.
1996 * Comment out configure test and code for tgetent to allocate its
1997 own termcap buffer when passed a NULL argument.
1999 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
2001 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
2002 to show. Restructured code to handle options to various
2003 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
2004 environment variable.
2006 * Added new man page `mh-draft' which documents the
2007 draft folder facility in nmh.
2009 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
2012 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
2013 fmtcompile.c to fmt_compile.c, and formataddr.c to
2016 * `send -help' wasn't showing the -(no)mime and -split
2019 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
2021 * Released nmh-0.13.
2023 * Changed mhpath so it doesn't abort if a message sequence
2024 such as "mhpath all" expands to more than 1000 messages.
2025 Also mhpath now dynamically reallocated space for message
2026 names (The number of command line arguments is still limited
2029 * Did some general restructuring of the code in folder.c
2030 that checks for folder information, and prints it.
2032 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
2034 * Changed `folder' to reallocate space for folder names if
2035 necessary. So `folders' can now handle more than 300 folders.
2037 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
2039 * Change configure to use a compile check to see if the tm struct
2040 has tm_gmtoff, rather than using egrep.
2042 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
2044 * Released nmh-0.12.
2046 * Had set_exists and unset_exists macros backwards.
2048 * Released nmh-0.11.
2050 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
2052 * Added documentation to mh-profile.man about the various
2053 `procs' (mhlproc, showproc, lproc, etc...).
2055 * Replace the bit twiddling for SELECTED, UNSEEN, and
2056 mp->attrstats with macros.
2058 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
2061 * Change fstat to stat in m_gmsg.c since Linux wants
2064 * Merge Linux patch sent in by Michel Oosterhof (original
2065 patch from bsa@kf8nh.wariat.org).
2067 * Document an undocumented MH feature. mhn -form mhl.null
2068 will suppress the display of the message header.
2070 * mhparam will now return "mhparam etcdir".
2072 * Add catproc to /config/config.c and use that in show.c
2073 and mshcmds.c, rather than hard coding in /bin/cat.
2075 * Add mhnproc to the list of `procs' in mh-profile.man.
2077 * Add configure test for lorder and tsort commands.
2079 * Commented out the padding in the `msgs` struct in h/mh.h
2081 * Change m_gmsg.c to allocate elements to the `info' array by
2082 500 elements at a time (rather than MAXFOLDERS / 5).
2084 * Add note to man page for mhmail that zero length messages are
2085 not sent. Need to use -body "" to send empty messages.
2087 * zotnet/mts/mts.c : compare character with '\0', not NULL.
2089 * sbr/getcpy.c : assign '\0' to character, not NULL.
2091 * add m_fmsg to most programs in uip so that they explicitly free
2092 folder/message structure when done with folder.
2094 * uip/slocal.c : cleanup processing of sender. Make sure it is
2095 defined even if message is missing "From " line.
2097 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
2099 * Released nmh-0.10.
2101 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
2103 * Add configure check for <locale.h>. Turn on LOCALE support
2106 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
2108 * Reversed previous decision to retain "From " lines in slocal.
2109 The "From " line is now removed from all messages.
2111 * inc now saves the date from the "From " envelope in the
2112 Delivery-Date header for all messages.
2114 * sbr/m_getfld.c: Clean up processing of Return-Path and
2115 Delivery-Date from the "From " envelope.
2117 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
2119 * client.c: cast iaddr to int before comparing return value
2120 of inet_addr with NOTOK.
2122 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
2124 * Grep test for signal names was failing on some OS'es because
2125 of missing tabs in regex.
2127 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
2129 * Released nmh-0.09.
2131 * Move config files and format files to *.old before installing.
2133 * Add configure check for killpg.
2135 * msh.c: include <termios.h> instead of <termio.h> and
2138 * prompter.c: don't include <sys/ioctl.h> anymore.
2140 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
2142 * Added `-mime' and `-nomime' options to `repl'.
2145 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
2147 * ruserpass.c : removed conflicting prototypes.
2149 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
2150 by `mesg' command. Previously only worked on BSD machines.
2152 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
2154 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
2155 than hard coded "/etc/utmp".
2157 * Released nmh-0.08.
2159 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
2160 when accessing ndbm/db file for duplicate suppression, instead of
2161 locking database itself.
2163 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
2165 * Added slocal action `mmdf' to deliver to a file in mmdf format.
2167 * Changed the slocal actions `file' and `>' to always deliver in
2168 mbox (uucp) format rather than be determined by RPATHS config
2171 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
2172 rather than mmdf format.
2174 * slocal now adds Delivery-Date field to all messages (previously it
2175 only added it to messages when delivering them to a file). The
2176 "From " line is now retained on all messages if compiling with
2177 RPATHS, rather than being discarded.
2179 * rcvpack no longer adds the Delivery-Date field to messages.
2181 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
2183 * Removed the script packmbox, since it's functionality has been
2186 * Changed packf so that it uses mbox (uucp) format by default
2187 rather than mmdf format. Added options -mbox and -mmdf to
2188 packf so you can choose the preferred format.
2190 * Changed rcvpack so that it uses mbox (uucp) format by default
2191 rather than mmdf format. Added options -mbox and -mmdf to
2192 rcvpack so you can choose the preferred format.
2194 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
2196 * Changed nmh to use dot locking by default (although you
2197 can still easily change this in config.h).
2199 * Simplified locking code. Removed code allowing setting of
2200 locking type in mts.conf. Now the locking type and locking
2201 directory (if any) can only be set at compile time.
2203 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
2205 * Prefer getting timezone information from tm->gmtoff rather
2206 than tzset and external timezone variable.
2208 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
2210 * Fixed typo in ruserpass.c in the variable toktabs.
2212 * When ruserpass was added to LIBOBJS, it was missing
2215 * Released nmh-0.07.
2217 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
2219 * Add check to configure, so that if ruserpass, or _ruserpass
2220 is not found, build version of ruserpass in sbr.
2222 * Added define's to discard.c, m_getfld.c, and scansbr.c so
2223 the code that manipulates internals of stdio, will build
2226 * Added #define to control whether to compile the simple
2227 built-in FTP client in mhn.
2229 * Added configure check for ushort and ulong. Change code
2230 to use ushort/ulong rather than u_short/u_long.
2232 * A couple of small cleanups in locking code.
2234 * Added configure check for gmtoff element in struct tm.
2236 * Added configure check for tzset.
2238 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
2240 * Released nmh-0.06.
2242 * Removed code for machines that don't have socket
2243 interface (how could they get mail anyway?).
2245 * Removed code for BSD41 machines. I don't think there are
2246 many such machines around anymore.
2248 * Add configure check for function uname, and prefer it
2249 over gethostname. General cleanup of zotnet/mts/mts.c.
2251 * Change all `lseek' calls to use POSIX symbolic constants
2252 SEEK_SET, SEEK_CUR, SEEK_END.
2254 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
2256 * Check lex generated file in zotnet/tws and use
2257 pre-generated version if necessary.
2259 * Released nmh-0.05.
2261 * Change to use reliable signals on all platforms that have
2262 sigaction. Change so that interrupted system calls are
2263 restarted for all signals except SIGALRM. This fixes alarm
2264 handling code in smail.c for BSD based systems.
2266 * Added lorder and tsort commands so that created libs can
2267 be linked in one pass.
2269 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
2271 * Changed pidwait so that while it is waiting for a child,
2272 it should block signals rather than ignore them.
2274 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
2276 * Add checks to configure for dbm_open and -lndbm.
2278 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
2280 * folder -pop and folder -push were freeing some memory too
2281 quickly, which caused the entry popped from the stack to not
2282 become the current folder.
2284 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
2286 * Released nmh-0.04.
2288 * Define ospeed and PC in termsbr.c is OS doesn't have
2291 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
2293 * editfile will create a symbolic link to the altmsg if it
2294 can't make a link, on any machine supporting lstat. Formerly
2295 this would happen only on BSD42 based machines.
2297 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
2299 * traverse (in popsbr.c) wasn't calling va_start before using
2300 variable argument list. Fixes core dump in inc when using POP.
2302 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
2304 * The variable pass in remotemail needed to be set to
2305 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
2308 * inc and msgchk were using -rpop by default when configured
2309 with POP support. Default is now -norpop.
2311 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
2313 * By default, post will now give the SMTP HELO command with
2314 the local hostname. If you specify a hostname with the
2315 clientname: option in mts.conf file, post will give the
2316 HELO command with that name instead. If the argument to the
2317 clientname: option is empty, no HELO command is given.
2318 (From the MH-6.8.4 diff)
2320 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
2322 * When using `-help' for a command, it will also print its
2323 profile compents from .mh_profile. (From MH-6.8.4 diff)
2325 * "slocal -file" will now correctly takes its input from
2326 a file (currently need to specify full path).
2328 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
2330 * "slocal -debug" will now issue a warning if a non-blank
2331 line in the .maildelivery file has less than 5 fields.
2333 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
2335 * Changed slocal so that code for duplicate suppression
2336 (MH config was MSGID) is always built. Added the options
2337 -[no]suppressdup to slocal to turn this on/off.
2339 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
2341 * Released nmh-0.03.
2343 * Fixed problem where mark would core dump if no
2344 .mh_sequence file existed.
2346 * Fixed problem where slocal would core dump if -debug
2347 option was given, and certain headers were missing.
2349 * Added patch to slocal to add `folder' (+) action, which
2350 is shorthand for piping message to rcvstore. Updated
2353 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
2355 * Changed flist option -unseen to -[no]all. Cleaned up
2358 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
2360 * Fixed flist. Changed the profile component `Folder-Order'
2361 to `Flist-Order. Added option `-sequence' to flist, so
2362 you can specify the name of the sequence to search for.
2364 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
2366 * A few minor portability cleanups. Changed to use PATH_MAX
2367 rather than MAXPATHLEN. Don't assume ospeed variable exists
2368 in termsbr.c. Removed some conflicting prototypes.
2370 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
2372 * Add configure test to check if tgetent will accept NULL
2373 and allocate its own buffer. Borrowed from zsh.
2375 * Changed libpath to etcpath.
2377 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
2379 * Cleaned up source code and Makefiles, so that if your `make'
2380 supports the VPATH option, you can build nmh in a different
2381 directory from where the source code is located.
2383 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
2385 * Released nmh-0.02.
2387 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
2389 * Split mhook man page into man pages for rcvdist, rcvpack,
2392 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
2394 * Changed code to use strerror, rather than using sys_errlist
2395 and sys_nerr directly.
2397 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
2399 * -compat switch from install-mh removed.
2401 * Changed the default POP port from "pop" to "pop3".
2403 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
2405 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
2406 (again) to mhn.defaults.sh. Changed find_program (again) to
2407 mhn.find.sh. mhn.defaults.sh now takes the search path
2408 as an argument. Default search path is now specified in Makefile
2409 rather than in script.
2411 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
2413 * Changed mtstailor file to mts.conf. Updated man pages.
2415 * Changed si_value to si_val in mhn.c, since it conflicts with
2416 macro defined on Solaris.
2418 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2420 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2421 support for Emacs front-end mhe. It is on by default.
2423 * Added the following configure options: --enable-nmh-pop to
2424 enable client side pop support, --enable-nmh-smtp to enable
2425 SMTP support. Client-side pop support now compiles. Man
2426 pages for inc, msgchk, mh-chart now correctly added pop
2429 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2431 * Added configure test for bug in C libraries where linker
2432 can't find ruserpass, but can find _ruserpass.
2434 * Fixed configure test so that termcap variable ospeed is
2437 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2439 * Source files converted to ANSI C.
2441 * md5 now compiled separately rather than being included
2442 in mhn.c. Changed md5 to use memset and memcpy.
2444 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2446 * Collected the error routines adios, advise, admonish, and advertise
2447 into one file (error.c), and did some rearranging of the code.
2449 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2451 * Added awk script sigmsg.awk (originally written by
2452 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2453 automatically generate signal messages for pidstatus.c.
2454 Added files sbr/signals.c, h/signals.h. Code now uses
2455 sigprocmask to block signals (if available). Code now uses
2456 signal blocking on non-BSD machines.
2458 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2460 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2462 * Released nmh-0.01.
2464 * Added configure code to check for type of signals functions
2465 you have (POSIX or BSD style signals). Added function
2466 SIGPROCMASK to simulate sigprocmask on machines that don't
2469 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2471 * Added -version switch to all commands. Also added to
2474 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2476 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2477 POSIX termios.h style functions if present.
2479 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2481 * Changed support/general/bootmhn.sh to output new mhn_defaults
2482 file to standard output by default (makes it easier for testing).
2483 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2484 script to find_program.
2486 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2488 * Added patch to uip/folder.c from exmh distribution to
2489 speed up -recurse option.
2491 * Added flist command from exmh distribution. It doesn't work
2492 yet, but it compiles :-)
2494 * Changed default location for install to
2495 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2496 and configuration files go in nmh/etc, and support binaries go
2497 in nmh/lib. Of course, all this can now be changed in the top
2500 * Started with mh-6.8.3 as based and converted to autoconf.
2501 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2502 Pop support and plenty of other things, are now broken.
projects / mmh / blob