1 Fri Mar 17 11:59:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
3 * wesley.craig@umich.edu did not document his previous KPOP patch,
4 so I did so, and asked him to check what I wrote. Unfortunately
5 he didn't notice my misunderstanding of his patch. I wrote that
6 if you #define POPSERVICE "kpop", inc and msgchk will use KPOP
7 exclusively, but if you leave it as "pop3", you can use Wesley's
8 new -kpop switch on a given invocation. Instead, however, -kpop
9 turned out to be necessary on every invocation, and a KPOP user
10 complained. Applied Wesley's new patch, which makes things work
11 like I thought his original patch did. After that, did one more
12 clarifying pass to the documentation in inc.man and msgchk.man.
14 Wed Mar 15 18:45:45 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
16 * When I fixed the long-standing makedir() bugs in January, I had
17 the code call strtoul(..., 0), which I believed to be safe as all
18 modes specified as ASCII constants in the nmh code started with a
19 leading zero (signifying octal), which I did as it would work if
20 internal constants were ever changed to hex. Unfortunately I was
21 unaware of the "Folder-Protect:" .mh_profile entry, which
22 mh-profile.man documents as an octal-only constant, with no
23 leading zero required. I've changed the strtoul() call to an
24 atooi() call and removed the misleading leading zeroes on the
25 ASCII octal constants in the code and man pages. Also changed the
26 "Folder-Protect:" example in the man page to something more
27 interesting than a duplication of the default.
29 * When I added my --enable-masquerade option, you'll note that I
30 didn't make it --enable-nmh-masquerade. I find the --enable-nmh-*
31 options too wordy and I'm not sure why Richard went that route.
32 I've renamed them to just --enable-*, but the old versions will
33 still work as well (they just aren't advertised).
35 * Added a line to the "nmh configuration" output saying whether
38 * Added a new README.developers file. From the file:
40 This file is intended to provide a few tips for anyone doing
41 development on nmh. Developers who learn things "the hard
42 way" about the nmh codebase (as opposed to local info best
43 encoded in a comment) are encouraged to share their wisdom
46 Currently the topics are "autoconf files" and "directory structure".
48 Tue Mar 14 12:41:48 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
50 * Applied, after some finessing,
51 Simon Burge <simonb@thistledown.com.au>'s --with-smtpservers patch:
53 Here's a patch that allows you to add
55 --with-smtpservers=<some.host.name>
57 to the ./configure command line to set the "servers: " line in
58 etc/mts.conf. Around here, we use "mailhost" so that all
59 machines in the current domain just talk to a central machine
60 and nothing else runs an MTA. Now, I can use
62 --with-smtpservers=mailhost
64 instead of having to remember to fix this by hand (and often
65 forgetting to do so!).
67 * Inspired by Simon's patch, added an --enable-masquerade option
68 to configure. It will set the "masquerade:" line of mts.conf.
69 You may specify a subset of the three types of masquerading, like
70 --enable-masquerade="draft_from mmailid", or leave off explicit
71 arguments to enable all three types.
73 * Alphabetized the --enable and --with options in configure.in and
74 INSTALL and added documentation of the two new options to the latter.
76 * Added new dependency for mts.conf: Makefile. If this isn't
77 done, then when you reconfigure nmh with new values for
78 --enable-masquerade or --with-smtpservers, you'll fail to get an
79 updated copy of mts.conf.
81 * Applied Simon Burge <simonb@thistledown.com.au>'s dtimep.lex patch:
83 It seems that some MUA's didn't handle y2k very well - ELM
84 seems to be one of them, and Ultrix's DXmail (based on MH!).
85 I've got a few emails this month that look like:
87 575 Jan 00 Xxxxxx Xxxx 3603 ...
89 22+ Jan 00 Xxx Xxxxx 1771 ...
91 The first has "15 Jan 100" as the date and the second has
92 "19 Jan 00" as the date. The following works around this so
93 that scan, show, sortm, etc work ok.
95 I put Simon's patch under the control of a new #define called
96 FIX_NON_Y2K_COMPLIANT_MUA_DATES. There's some commentary in
97 acconfig.h about when you might not want to #define it.
99 * Created new dtimep.c-lexed with Simon's change using dtimep.lex
100 lexed on Solaris 2.6. Added missing dependency in
101 zotnet/tws/Makefile.in for dtimep.c: dtimep.c-lexed.
103 * Added scan.MMDDYY and scan.YYYYMMDD format files.
105 Mon Mar 13 21:32:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
107 * Applied Sullivan N. Beck <sbeck@cise.ufl.edu>'s mhshow-suffix patch:
109 With the patch below, you can add lines like:
111 mhshow-suffix-application/msword: .doc
112 mhshow-suffix-application/PostScript: .ps
114 to the mhn.defaults file to append the given suffix to a
115 scratch file. This allows applications which require a
116 certain suffix to run properly.
118 * Removed -force_html from lynx entry in mhn.defaults.sh (I
119 believe older versions of lynx lack that option) and added
120 "mhshow-suffix-text/html: .html".
122 * Modified username_extension masquerading to only use the
123 extended address on generated [Resent-]From: lines and SMTP
124 envelope From:. With Neil's original implementation, nmh's global
125 idea of the username was changed, which would result in inc lying
126 and saying you had no new mail because it was looking for a
127 mailbox called, for instance, "dan-nmh" (where username was "dan"
128 and $USERNAME_EXTENSION was "-nmh").
130 * Applied Simon Burge <simonb@thistledown.com.au>'s dtime.c patch:
132 There's a wrap-around problem that affects the implementation
133 of Zeller's congruence in dtime.c. This causes the day-of-week
134 calculations to fail for dates after Feb 29, 2000 (probably up
135 until some year far in the future).
137 Mon Mar 06 12:20:20 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
139 * Applied Neil W Rickert <rickert+nmh@cs.niu.edu>'s msh.c patch:
141 I finally tracked down the problem in msh that was causing
142 errors whenever I tried to examine a 'mmdf' style mailbox.
144 It turns out that not enough memory was being allocated with
145 calloc(), causing memory pointers to be overwritten and
148 Fri Mar 03 16:07:33 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
150 * Changed the new "plussed_user" option to mts.conf's
151 "masquerade:" to "username_extension" after getting feedback from
152 qmail users, who use '-' as a separator rather than '+'. Removed
153 checking of $USERPLUS variable. Now check $USERNAME_EXTENSION,
154 which needs to include the appropriate separator for your MTA
155 ('-', '+', or whatever) as its first character.
157 Thu Mar 02 23:04:30 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
159 * Added a new "boolean" type to mh.h and TRUE and FALSE constants.
161 * Added a note to DIFFERENCES stating that it's out-of-date
162 (Richard was the last one to update it) and that we should
163 consider only documenting incompatibilities with MH there.
165 * Implemented (and documented) a third kind of username
166 masquerading: "plussed user" masquerading. This one was suggested
167 by Neil Rickert <rickert+nmh@cs.niu.edu>. It's based on sendmail's
168 "plussed user" feature, where mail sent to <user>+<string> will be
169 delivered to <user>. When it's enabled, it's controlled by the
170 $USERPLUS environment variable. How is it enabled? Well, that
173 * Renamed the "mmailid:" setting in mts.conf to "masquerade:", and
174 changed it so that rather than being a boolean, it can be set to
175 any combination of the three values "draft_from", "mmailid", and
176 "plussed_user". Thus it is now possible to enable the three types
177 of masquerading individually.
179 * Fixed a bug with "mmailid" masquerading (dating back to MH?)
180 where if it was turned on, ','s would no longer be considered
181 GECOS field delimiters.
183 Wed Mar 01 23:30:50 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
185 * Changed the GECOS-field '&' translation behavior to be
186 controlled by the BSD42 #define rather than GCOS_HACK, since it's
187 apparently always appropriate on OSes where BSD42 is #defined, and
188 never appropriate on any other OSes. Thanks to Kimmo Suominen for
189 responding to my "What is this code here for?" comment in mts.c
190 and explaining the feature.
192 Mon Feb 28 21:50:29 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
194 * Upped the version number to 1.0.3+dev (ideally this should be
195 done by whoever makes a release tar file, immediately after doing
198 * Applied Paul Fox <pgf-spam@foxharp.boston.ma.us>'s scansbr.c
199 patch, posted to comp.mail.mh, which he says prevents loss of mail
200 when inc'ing into a full filesystem.
202 * Changed "echo > stamp-h.in" in Makefile.in to "date > stamp-h.in"
203 so that stamp-h.in will be different each time configure.in and
204 related files are changed, making it easier to check it in (which
205 is necessary to prevent unnecessary autoconf calls).
207 * My declaration of initgroups() in slocal.c to eliminate the "no
208 prototype" warning wasn't portable (FreeBSD 3.[23] choked). Now
209 use AC_EGREP_HEADER to see where initgroups() is declared, if
212 Sun Feb 20 12:17:15 2000 Ruud de Rooij <ruud@ruud.org>
214 * Fix security hole in mhshowsbr.c which allowed untrusted shell
217 * Released nmh 1.0.3.
219 Thu Feb 10 10:54:36 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
221 * Oops. %-escapes on mhstore lines in mhn.defaults.sh should not
222 be surrounded by single quotes, as a shell is not spawned when
223 just saving files, and the filenames will end up with literal
224 quotes embedded in them.
226 Fri Feb 04 12:29:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
228 * Whoever originally added the -help switch to all the commands
229 got too cute and had the option itself print out as "-(help)" in
230 the -help output. I guess the idea was to make reference to the
231 fact that clearly you know about the -help option since you're
232 currently looking at its output. I think it's a bad idea to
233 overload the meaning of the parentheses, however -- they're
234 supposed to indicate what abbreviated prefix of the switch you're
235 allowed to specify. It doesn't make sense to show that you're
236 allowed to "abbreviate" the switch to its entire length.
238 Thu Feb 03 17:52:01 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
240 * Applied wesley.craig@umich.edu's KPOP patches. According to him:
242 The following patch fixes a problem with requesting a
243 service key for a machine that has multiple 'A' records. It
244 also makes "-kpop" a command line option, for users who
245 would like to use both "kpop" and "pop".
247 Did no testing of the new features, as I don't have access to a
250 * Modified inc.man and msgchk.man to document Wesley's new -kpop.
252 * Modified INSTALL and config.h.in to reflect the new -kpop feature.
254 Fri Jan 28 17:39:24 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
256 * All %-escapes in mhn.defaults that actually expand to something
257 should be surrounded by single quotes. Added quotes to the ones
258 in mhn.defaults.sh that were missing them.
260 * Added check for lynx to write mhshow-show-text/html line in
263 Thu Jan 27 12:22:25 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
265 * makedir() had multiple bugs dating back to MH. An octal
266 constant was apparently being interpreted as decimal, resulting in
267 directories with no user read or execute permissions, making
268 nested directory creation fail. And there wasn't even an
269 _attempt_ to set desired permissions (e.g. from "Folder-Protect:"
270 in .mh_profile) on the outer directories of a nested directory.
272 * A second `make install' would always fail because the check for
273 whether mh_profile.5 existed was written incorrectly.
275 Wed Jan 26 02:22:00 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
277 * Added documentation on both types of masquerading to post's man
280 Tue Jan 25 22:58:12 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
282 * Doug's portability fix of my setgid inc autodetection had a
283 caching bug -- if you re-ran configure, uip/Makefile would be
284 corrupted, and installation would bomb out on OSes where inc needs
287 * Implemented a new kind of email address masquerading. Usually,
288 when a user writes a custom "From:" header in a draft, nmh uses it
289 rather than generating one. However, the user's true address is
290 used in the SMTP envelope "From:" and is revealed in the "Sender:"
291 header. Now, when mmailid is set to non-zero, the envelope
292 "From:" uses the address specified in the draft "From:" header,
293 and there is no "Sender:" header. This is useful when sending on
294 behalf of a remote POP3 account or when remote mail robots
295 incorrectly use the envelope "From:" in preference to the body
296 "From:". This processing has only been implemented for post, not
297 for the undocumented spost (which was already missing some "From:"
298 processing that post has).
300 Mon Jan 24 22:26:06 2000 Dan Harkless <dan-nmh@dilvish.speed.net>
302 * Got rid of the rest of the gcc -Wall warnings that I didn't have
303 time for on 1999-07-15 (and, it would seem, some new ones people
304 introduced since then). The primary ones were the warnings that
305 default prototypes were being used for [v]snprintf() and
306 str[n]casecmp(). As of right now, there are _no_ compilation
307 warnings except on dtimep.c-lexed (at least under AIX 4.1.5 and
310 Sun Jan 2 23:42:18 2000 Ruud de Rooij <ruud@ruud.org>
312 * Move mhtest from bindir to libdir.
314 * Move sendfiles from libdir to bindir.
316 * Updated sendfiles manpage to reflect this change.
318 * Added documentation for -build and -file switches to repl and
319 forw manpages (patch from Peter Maydell).
321 * Fixed interaction between specifying -cc in profile and -group on
324 Tue Nov 1 13:48:10 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
326 * Changed the version number from 1.0.3 to 1.0.2+dev. There was
327 not unanimous support for my proposed even/odd release/developer
328 version number dichotomy. 1.0.2+dev implies release 1.0.2 plus
331 Fri Oct 29 13:42:51 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
333 * Upped the version number to 1.0.3. If we don't do this, then
334 when people report bugs against 1.0.2, we won't know "which" 1.0.2
335 they're talking about (since the development source is publically
336 available via CVS). I think the Linux kernel version numbers are
337 a good model, so the next time we roll a tarball, it should be
338 version 1.0.4 (or higher -- anyhow, an even-numbered version).
340 Fri Oct 29 06:41:08 1999 Doug Morris <doug@mhost.com>
342 * Released nmh-1.0.2.
344 Tue Oct 26 22:57:00 1999 Doug Morris <doug@mhost.com>
346 * Added check for whether "libtool" is in fact gnu libtool. If
347 it is, it is not used. This is the wrong behavior. If vendor
348 XYZ later on decides to create yet another libtool, we'll be
349 caught again. This works for now.
351 * Minor updates to MACHINES refering to Mac OS X.
353 Thu Oct 21 20:45:37 1999 Doug Morris <doug@mhost.com>
355 * Added check for "libtool" (a ranlib type tool for Mac OS X)
356 and modified Makefiles so that nmh will build under Mac OS X.
358 Sun Oct 17 08:28:56 1999 Ruud de Rooij <ruud@ruud.org>
360 * Changed repl defaults to partly revert to MH behaviour,
361 "-cc all" is now only implied with -group.
363 * The replcomps template includes cc: header again (as in MH).
365 * Updated repl man page to reflect these changes.
367 Sat Oct 16 02:57:47 1999 Doug Morris <doug@mhost.com>
369 * Tweaked configure to handle Solaris and SunOS after the BIND
370 changes. Both need more cleanup.
372 Sat Oct 16 00:17:36 1999 Doug Morris <doug@mhost.com>
374 * Removed BIND define and replaced it with a check for
375 gethostbyname (to determine if the host is DNS aware) and a
376 check for sethostent. This appears to be the right thing to
377 do, but there is no explanation of the reasoning behind the
378 BIND define in the code and it appears to have been used for
381 Wed Oct 13 15:53:53 1999 Doug Morris <doug@mhost.com>
383 * Updated manpages Makefile to link mh-profile.5 to
384 mh_profile.5 after installation. Suggestion from Richard Cohen
385 <richard@jubjub.demon.co.uk>.
387 * Modified configure.in to check for _IO_write_ptr and libio.h
388 to determine whether to define LINUX_STDIO instead of using
391 Mon Oct 4 15:22:46 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
393 * Added '-L' to the calls of 'ls' in configure.in -- I have seen
394 multiple machines in the past where the mail spool was a symlink
395 to a directory on another device with more free space.
397 Fri Oct 1 22:36:56 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
399 * Fixed a portability problem in Doug's fix of a portability
400 problem in my MAILGROUP autoconf support ('ls -l' vs. 'ls -lg').
402 Sat Sep 25 18:40:43 1999 Ruud de Rooij <ruud@ruud.org>
404 * Added config.sub and config.guess to the list of files to be
407 * Fixed bug in sbr/fmt_scan.c where an extra newline would be
408 added if a list of addresses was split over several header lines.
410 * In mts/smtp/smtp.c, undefine strlen and strcpy if they are
411 macros, regardless of platform.
413 * Allow q to quit mhshow, and n to skip to next part. Patch from
414 Kimmo Suominen <kim@tac.nyc.ny.us>.
416 * Modified mhstore to recognize attachments created by sendfiles
417 with x-conversions=gzip.
419 Mon Sep 13 21:20:10 1999 Doug Morris <doug@mhost.com>
421 * added explicit cast to long from time_t for tclock in
424 * Commented out #ifdefs for <sys/ioctl.h> in termsbr.c since
425 it's needed for ioctl() anyway. This prevents a warning about
426 implicit definition of ioctl().
428 * Moved guesses performed by AC_CANONICAL_SYSTEM back into the
429 "User Configuration" section of config.h (moved @TOP@ in
430 acconfig.h) so they're easier to find, should someone actually
431 want to mess with them.
433 Sun Sep 12 15:50:34 1999 Doug Morris <doug@mhost.com>
435 * updated Makefile.in so it recognized COMPLETION-TCSH and
436 COMPLETION-ZSH (only used in make nmhdist).
438 * added prototype for ruserpas to <h/prototypes.h>. Fixes
439 warnings in mhparse.c and mhbuildsbr.c.
441 * added include checks for <time.h> and <sys/time.h> to
442 prevent warnings in fmt_compile.c, fmt_scan.c, lock_file.c,
443 sendsbr.c, mhbuildsbr.c, mhcachesbr.c, picksbr.c, and post.c.
445 * added include for <zotnet/mts/mts.h> to ali.c, scan.c, ap.c,
446 rcvdist.c, rcvstore.c, rcvtty.c, and spost.c to remove
447 warnings about implicit definition of mts_init().
449 * added <grps.h> to slocal.c to prevent warnings about
452 * added <h/signals.h> to prevent warning about missing SIGNAL
455 * added function prototypes to smtp.c, whatnowproc.c,
456 mhbuildsbr.c, mhparse.c, mshcmds.c, show.c, whatnow.c, mhl.c
459 * explicitly declared mbx_style in mshcmds.c and lused in
460 fmtdump.c as type static int instead of just static to
463 * various code cleanups to prevent ambiguous statements
464 (brackets for if/thens and parens for complicated if
468 Sun Sep 12 09:19:27 1999 Doug Morris <doug@mhost.com>
470 * commented out _cleanup() in mf.c because it's the only
471 location in all of the source code where it exists. It was
472 preventing compilation on at least linux.
474 * Added check for <db1/ndbm.h> which is the new location where
475 linux systems appear to be stuffing this header file.
477 Thu Sep 9 23:15:49 1999 Doug Morris <doug@mhost.com>
479 * fixed varous mkstmep bugs introduced in 1.0.1 by me. Whups!
481 * added mh_profile SEGV patch from Richard Cohen
482 <richard@jubjub.demon.co.uk> that prevents crashing when
483 mh_profile doesn't end in a newline. A similar patch was
484 previously sent in by Andrew Bettison <andrewb@zip.com.au>.
486 * fixed bug in associated with MAILGROUP #define (group "mail"
487 is not universal) -- hard to believe, but true.
489 Tue Sep 7 16:47:03 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
491 * Renamed ZSH.COMPLETION to COMPLETION-ZSH and added COMPLETION-TCSH.
493 Tue Aug 17 16:06:29 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
495 * Automated #define of MAILGROUP and installation of inc as setgid mail
496 when the mail spool directory isn't world-writable.
498 Thu Jul 15 18:37:07 1999 Dan Harkless <dan-nmh@dilvish.speed.net>
500 * slocal -debug used to leave a file in /tmp for each message
501 processed. Very bad for folks with slocal -debug in their .forward!
503 * Got rid of a ton of compilation warnings. Most were "junk"
504 warnings due to the use of gcc -Wall (without -Wno-parentheses),
505 but a few represented real bugs. There remain many warnings to be
506 tackled that are due to missing function prototypes (e.g. snprintf()).
508 * Default rcvdistcomps no longer puts a copy of all outgoing
509 messages in outbox. Added an rcvdistcomps.outbox that does.
511 Sat Jun 9 12:22:47 1999 Doug Morris <doug@mhost.com>
513 * Updated configure to check for mkstemp (available on OpenBSD) and
514 substitute it for mktemp if available.
516 Thu May 13 16:40:19 1999 Doug Morris <doug@mhost.com>
518 * Added config.sub and config.guess and updated acconfig.h and
519 configure.in to automatically detect system type and set the
522 Wed May 12 23:41:33 1999 Dan Winship <danw@mit.edu>
524 * Released nmh-1.0.1.
526 Fri May 7 17:18:28 1999 Dan Winship <danw@mit.edu>
528 * Fixed flist to properly deal with relative folder names.
529 Problem noted by Jerry Peek <jpeek@jpeek.com>.
531 * Fixed --with-krb4 to work with original Kerberos 4 libraries as
532 well as the Kerberos 5 compat libraries. Based on a patch from
533 Assar Westerlund <assar@sics.se>.
535 * Added a check in configure.in to test if modf is in libc and
536 link with libm if not. This is needed by at least Digital UNIX.
537 Problem pointed out by Kevin Oberman <oberman@es.net>.
539 * Fix a bug from the "mhn -show" to "mhshow" renaming that
540 made the "list" command in whatnow not work for some users.
541 From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
543 * Replaced "extern int errno" with "#include <errno.h>" in a
544 number of files. Suggested by Stephen Wilson Bailey
547 * Fixed a problem in how "packf -mbox" translated "Return-Path:"
548 lines. From Kimmo Suominen <kim@tac.nyc.ny.us>.
550 * Fixed a segmentation fault in inc. Patch originally from Ruud de
551 Rooij <r.c.m.derooij@twi.tudelft.nl>.
553 * Allow display of 8bit encoded messages. From Kimmo Suominen
556 * Fixed repl to not add line breaks in the middle of long
557 addresses when building a reply. From Ruud de Rooij
558 <r.c.m.derooij@twi.tudelft.nl>.
560 * Added -library switch to spost so it can parse user aliases like
561 post does. From Ruud de Rooij <r.c.m.derooij@twi.tudelft.nl>.
563 * Changed configure.in's check for sigsetjmp to properly deal
564 with systems like Linux where it is a macro. From
565 <elleron@servtech.com>.
567 * Fixed a bug in whatnow that could cause it to sometimes exit
568 without prompting the user. Based on a patch by Richard Geiger
571 * Added code to deal with SIGPIPE in mhl so it doesn't print
572 "Broken pipe" if you quit out of the moreproc.
574 * Documentation: Added a note to MACHINES about Irix make. Added a
575 pointer to the online copy of the MH book in INSTALL. Added
576 some additional information to the whatnow and packf man pages,
577 suggested by Jerry Peek <jpeek@jpeek.com>.
579 * Updated INSTALL, FAQ, etc to not refer to Richard as the
580 maintainer or math.gatech.edu as the home any more.
582 1999-02-06 Richard Coleman <coleman@math.gatech.edu>
586 * Merged mbx_open and mbx_Xopen in dropsbr.c. Fixed
587 mbx_open so that the mode of zero length maildrops
588 would not be changed.
590 * Replaced the substitute version of snprintf() with the
591 one from the Apache web server.
593 * Changed to default mode for creating new messages to 0600
594 (this should have been done a long time ago).
596 * Changed "flist" to handle searching for multiple sequences
597 for each folder. Also flist will now correctly split
598 Unseen-Sequence if it consists of multiple sequences.
600 * Added new switches `-unlink' and `-nounlink' to "refile".
602 * Added new switches `-unlink' and `-nounlink' to "rmm".
604 * More cleanups of slocal output. Changed adorn() to
605 send to stdout, instead of stderr (to match rest of
608 * Merged mbx_create() into mbx_open, so that creating and
609 opening a nonexistent maildrop is done atomically. This
610 removes a bad race condition.
612 * Fixed bug that caused slocal to be unable to save to MMDF
615 * Added new wrapper function usr_folder() to slocal.c to
616 handle adding message to folder (currently, it still uses
617 usr_pipe() to call rcvstore).
619 * seq_list() checks for empty folder before scanning for
620 sequence information.
622 * num_digits() in flist.c and folder.c now returns correct
623 value for 0. Also added sanity check.
625 * folder_delmsgs() now correctly decrements internal message
628 * Don't attempt to read sequence information if folder
631 * Split seq_read into seq_public and seq_private.
633 * Small change to sigmsg.awk, since newer versions of gawk
634 interpret 034 as octal.
636 * In flist, don't scan for sequence information in empty folder.
638 * Updated mhn.defaults.sh to output profile entries for mhshow,
639 mhstore, and mhbuild.
641 * Changed configuration parameter "mhn-access-ftp" to
642 "nmh-access-ftp". Updated man pages
644 * Moved the code in InitMultipart to reverse the order of the
645 parts in a multipart, into its own function "reverse_parts()".
647 * Changed code in mhbuildsbr.c to store unencoded content
648 in the c_cefile structure when building.
650 * Changed code in mhoutsbr.c to look for unencoded content
651 in the c_cefile structure when outputing message.
653 * Changed configuration parameter "mhn-cache" and
654 "mhn-private-cache", to "nmh-cache" and "nmh-private-cache",
655 since it is used in mhstore, mhlist, and mhshow. Updated man pages
657 * Change configuration parameter "mhn-storage" to
658 "nmh-storage", since it is now used in mhstore, mhlist,
659 and mhshow. Updated man pages
661 * Add autoconf support for KPOP (kerberized pop).
663 * Add autoconf support for Hesiod.
665 * Split routines to output a message given a Content structure
666 (output_message, output_content, write7Bit, etc..) to a new
669 * Split output_content(), into output_content() and build_headers().
671 * Changed copy_some_headers() in mhstoresbr.c, to use the linked
672 list of header fields, rather than reopening the message.
674 * Added free_header() to mhfree.c to free structures containing
675 header field information.
677 * Changed get_content() to use the linked list of header fields
678 when parsing the various MIME headers (Content-XXX).
680 * Changed get_content() to store linked list of header field
681 values when parsing a content.
683 * Changed mhbuild, mhn, mhlist, mhshow, mhstore, to use the
684 routines in mhcachesbr.c to handle the content cache.
686 * Split various funtions (find_cache, find_cache_aux, find_cache_aux2,
687 cache_content) into new file mhcachesbr.c.
689 * More calls to sprintf/strcpy (primarily in mhparse.c
690 and mhbuildsbr.c) converted to snprintf/strncpy.
692 * When a message is displayed with `mhshow', it is now
693 removed from the "unseen" sequence.
695 * Change the default "showmimeproc" to "mhshow".
697 * Split "mhn -show" off into separate command "mhshow".
699 * Split "mhn -store" off into separate command "mhstore".
701 * Split "mhn -list" off into separate command "mhlist".
703 * Add sanity checks to context_find(), context_replace(),
704 and context_del(), to abort if context file hasn't been
707 * Add calls to context_read(), to the beginning of all nmh
708 commands (instead of being called indirectly by context_find).
710 * Changes the "substitute" version of vsnprintf/snprintf for
711 operating systems without native versions, to just call the
712 native vsprintf(), and ignore the buffer length. This is
713 faster, but less secure than the previous version that used
714 temporary files. This should only be a problem for systems
715 which do not have a native snprintf(), and require `inc' to
718 * Lots more calls to sprintf/strcpy converted to snprintf/strncpy.
720 * Changes client() routine to take additional parameter, which is
721 the buffer length of the parameter "response". Then added
722 buffer length checks for this parameter.
724 * Changed getws() to get_fields(), since that is apparently the
725 name of a wide character version of gets() on some archetitures.
727 * Lots of sprintf/strcpy calls converted to snprintf/strncpy.
729 * Change the code in most of the commands that take multiple
730 message names/sequences/ranges on the command, such that
731 the msgs array is expanded dynamically. This removes most
732 of the limits on the length of command lines.
734 * Add additional parameter to copyip(), to specify the
735 maximum number of strings that can be copied (security
738 * Create new function getarguments(), to massage the argument
739 vector before parsing it (add any arguments from your
740 profile to the beginning of the argument vector). This
741 also removed the general limit on the number of command line
744 1998-07-04 Richard Coleman <coleman@math.gatech.edu>
748 * Added a new command "delete", that is available during
749 a "whatnow" session. It is equivalent to "quit -delete".
751 * Added another parameter to editfile (in whatnowsbr.c),
752 that controls whether editfile should remember the last
753 program that was exec'ed. This way the whatnow command
754 "mime", will not be re-executed if "edit" is later given
757 * Changed whatnowsbr.c, so that whatnow doesn't abort if
758 mhbuild returns an error.
760 * Added parameter to sendsbr(), so you may specify whether to
761 rename the draft file.
763 * Pass delay time to splitmsg() as a parameter, rather than
764 use a global variable.
766 * Moved code to rename draft file after sending message from
767 splitmsg and sendaux, to sendsbr.
769 * Removed all the code in viamail to split messages and then
770 mail them. Replaced this with the standard sendsbr.c routines.
772 * Changed sendsbr(), so that when splitting messages into
773 messages of type "message/partial", the header fields that
774 are copied are more compliant with RFC-2046.
776 * Fixed mhbuild to track temporary files better. They are
777 now correctly removed when mhbuild aborts.
779 * Created a new man page for "sendfiles". The information
780 about "mhn -viamail" in the "mhn" man page was moved to
783 * Changed the name of the "viamail" shell script to
784 "sendfiles". Modified "sendfiles" to use the new
787 * Moved the functionality for "mhn -viamail" out of mhn,
788 and into a separate executable called "viamail".
790 * When storing MIME contents to a folder using mhn -store,
791 they are now accumulated in a temporary file, and then added
792 to the folder using folder_addmsg().
794 * Moved code to save content to a folder from store_content
795 to new function output_content_folder.
797 * Moved code to save content to file from store_content to
798 new function output_content_file.
800 * Moved code to parse storage format string from store_content
801 to new function parse_format_string.
803 * Fix copy_some_headers() in mhstoresbr.c, so that the
804 correct header fields in the first enclosing message/partial
805 will be copied (according to RFC2046), when using mhn -store
806 to reassemble messages of type message/partial.
808 * Fixed bug to openFTP() in mhparse.c, that caused the
809 tmp file to not be removed, when transferring a
810 message/external file from ftp.
812 * Moved the code in mhparse.c to process -auto switch (scan
813 contents for the attribute "name"), to a new function
814 "get_storeproc" in mhstoresbr.c.
816 * Moved routines to free data structures related to MIME
817 content from mhparse.c and mhbuildsbr.c, to new file
820 * Moved code to show/display MIME content into new
823 * Moved code to store MIME content from into
824 new file mhstoresbr.c
826 * Moved code to parse MIME content into new
829 * Moved code to list information about MIME content
830 into new file mhlistsbr.c.
832 * Move part_ok(), type_ok(), content_error(), flush_errors(),
833 and set_endian() to new file mhmisc.c.
835 * Start to isolate the code to show, list, and store MIME
836 messages. One side effect is that only one flag (-show,
837 -list, or -store) can be used at a time now.
839 * mhn -store -auto wasn't storing file in correct directory.
841 * Removed a few dead variables from sbr/ruserpass.c
843 * move code for creating tmp files, and renaming the
844 the composition draft in mhbuild, from build_mime()
847 * remove left-over code in mhbuild.c, mhbuildsbr.c, for
848 the -[no]auto switch (which isn't used in mhbuild).
850 * split mhn.c into mhn.c and mhnsbr.c (name later changed
853 * split mhbuild.c into mhbuild.c and mhbuildsbr.c.
855 1998-05-25 Richard Coleman <coleman@math.gatech.edu>
859 * Added (unlisted) options [no]dashstuffing to send, post,
860 and whatnow to determine whether to do RFC934 quoting
861 (dashstuffing) for encapsulated BCC messages. The default
862 is still the same (dashstuffing).
864 * Changed the undocumented feature "nodashmunging" in forw
865 and mhl, into the documented feature "nodashstuffing". The
866 default for forw, is still "dashstuffing" for backward
867 compatibility, although I don't believe that bursting
868 RFC934 digests is very common anymore.
870 * Added an option to define REALLYDUMB in the default config.h.
871 But it is not on by default.
873 * moved creation of config file mts.conf from zotnet/mts
874 to etc. This simplified the Makefile in zotnet/mts.
876 * simplified directory support/general to etc.
878 * removed unneeded directory support/bboards.
880 * split getusername() into getusername() and getuserinfo().
882 * Changed getusr() routine to getusername().
884 * Slight cleanup in folder_pack.c on code that records the new
885 number of the "cur" message when packing.
887 1998-05-08 Richard Coleman <coleman@math.gatech.edu>
891 * Change install process, so that hard linking the correct mts
892 library to libmts.a, is not necessary. The final link process
893 uses the original name of the library.
895 * Fixed bug in flist.c and folder.c, so that symbolic links which
896 point to directories, will not decrement the number of directory
899 * Split the function list_content (in mhn.c and mhbuild.c) into
900 list_content and list_debug.
902 * Don't pack (folder -pack) an empty folder.
904 * Exit gracefully in flist.c, if no sequence is specified,
905 and no "Unseen-Sequence" is given in nmh profile.
907 1998-02-27 Richard Coleman <coleman@math.gatech.edu>
911 * Small clarification to the man page for `ali'.
913 * Fix bug in inc.c so that if both flags `-file' and `-truncate'
914 are given, that order doesn't matter.
916 * Fix bug in seq_list.c when realloc'ing for
919 1998-02-23 Richard Coleman <coleman@math.gatech.edu>
923 * Add new section on "Transfer Encodings" to man page for mhbuild.
925 * In mhbuild.c, split compose_content into compose_content
926 (parse and execute composition string), and scan_content (scan
927 content, decided transfer encoding, check for clash with boundary
928 string). I did a good amount of rearranging of this code.
930 * Moved definitions for data structures for parsing MIME
931 messages from mhn.c and mhbuild.c to a new include
934 * Small amount of rearranging in sendsbr.c
936 * Small changes to MAIL.FILTERING file.
938 * Add the file MAIL.FILTERING to nmh distribution.
940 * Add line to packf so that if message begins with
941 "X-Envelope-From:" field, it is converted to "From ".
943 * Fix packf to add "From " line to beginning of message,
944 even if Return-Path doesn't exist.
946 * Add note to MACHINES file that on Linux, configure
947 doesn't find the functions sigsetjmp/siglongjmp.
949 * Fix configuration for machines that don't have (or find)
950 sigsetjmp/siglongjmp.
952 1998-02-11 Richard Coleman <coleman@math.gatech.edu>
956 * Add a configure check for sigsetjmp. Add some conditional
957 #define's in h/signals.h in case it's not found.
959 * Added additional notes about -auto switch in mhn man page.
961 * Added note about MM_CHARSET environment variable to
962 mh-profile(5) man page.
964 * Fix signal problem in mhn.c (change setjmp/longjmp to
965 sigsetjmp/siglongjmp).
967 1998-02-09 Richard Coleman <coleman@math.gatech.edu>
969 * Released nmh-0.22-pre1.
971 * Changed the first line in mhl.format from
972 " -- using template mhl.format -- " to a blank line.
974 * Added note about automimeproc to mh-profile man page.
976 * Reorganize the main entry point for parsing a MIME message
977 or file in mhn. Add new function parse_file() as new main
978 entry point for parsing MIME files.
980 * Add note to mhn man page, that "mhn -file -" will accept the
981 source message on the standard input.
983 * Changed a sanity check in folder_realloc that was too strict.
985 * -norfc934mode is now the default for mhbuild,
986 rather than -rfc934mode.
988 * Fix mhbuild, so that Content-Description and RFC-822 comments
989 from #forw directive will be correctly included if there is
992 * Change mhn to correctly default parts of multipart/digest to
993 message/rfc822 (leftover code from rfc934mode was removed).
995 * Restore HP specific code to zotnet/tws/lexstring.c. Apparently
998 1998-02-06 Richard Coleman <coleman@math.gatech.edu>
1000 * Released nmh-0.21.
1002 * If the file given to mhbuild is "-", then accept the draft on
1003 standard input, and output the MIME message to standard output.
1005 * Cleaned up code in mhbuild.c that decides what transfer
1008 * Cleaned up code in mhbuild.c that decides what character set
1009 to use for text contents.
1011 * Removed old hpux specific code from zotnet/tws/lexstring.c
1013 1998-02-02 Richard Coleman <coleman@math.gatech.edu>
1015 * Released nmh-0.21-pre2.
1017 * Added the "decode" variable to mhl.format and mhl.header.
1019 * Added new variable "decode" to mhlsbr.c to decode text in
1020 header fields as per RFC-2047.
1022 * Make sure that when decoding RFC-2047 header fields, that any
1023 spaces at the ends of the encoded text are not ignored, but the
1024 spaces between encoded word are.
1026 * Removed #ifdef's for MIME. MIME support is always compiled in.
1028 * scan/inc will now decode both Subject and From lines as
1029 RFC-2047 encoded header fields.
1031 * Added new function write_charset_8bit() to sbr. It returns
1032 the character set to use for 8bit text in composition draft.
1033 Changed mhbuild to use this function.
1035 * Split mhn man page into man pages for mhn and mhbuild.
1037 * mhn -show will only now only use default method for content
1038 of type plain, if it is NOT a part of a multipart/alternative.
1040 * Split mhn -build into mhbuild. Did some code cleanup.
1042 * Added support for %(decode) to fmtdump.c.
1044 * check_charset() now accepts US-ASCII as a subset of any
1045 ISO-8859-X character set.
1047 * Changed the default "showproc" to mhl, instead of the
1050 * When reading file into mhn composition file, only need read
1051 permissions, not write permissions.
1053 * Added own version of strcasecmp to distribution, since
1054 nmh calls it frequently with NULL pointers (ughh).
1056 * Replaced uleq.c with strcasecmp. Removed uleq.c from
1059 1998-01-22 Richard Coleman <coleman@math.gatech.edu>
1061 * Released nmh-0.21-pre1.
1063 * If a message is missing charset parameter to text/plain, show
1064 will assume US-ASCII, rather than just calling showmimeproc.
1066 * Change show.c and mshcmds.c to use check_charset to see if text
1067 message contains valid character set.
1069 * Added new scan format file "scan.nomime" to support/general
1070 that doesn't do any RFC-2047 decoding.
1072 * Modified all the scan format files in support/general to do
1073 RFC-2047 decoding of Subject field.
1075 * Did more work on sbr/fmt_rfc2047.c, so that it will correctly
1076 ignore whitespace between two valid encoded words, but not
1077 between an encoded word and normal text.
1079 * Created new file sbr/check_charset.c. Moved code from
1080 fmt_rfc2047.c to check for valid character set to this file.
1082 * Added format escape %(decode) to decode contents of "str" register
1083 as a RFC-2047 header field.
1085 * The command install-mh now recognizes the switches -version
1088 * Added a new argument to print_help.c to decide whether to
1089 print profile entries (needed for install-mh to prevent weird
1092 * Changed folder_read.c and folder_realloc.c so that mp->lowoff
1093 is initialize to max (mp->lowmsg, 1) rather than always 1.
1095 * Changed macros for sequence/attribute manipulation so that
1096 message status array doesn't need to always start at 1.
1098 * Small cleanups in folder_realloc().
1100 1998-01-09 Richard Coleman <coleman@math.gatech.edu>
1102 * Released nmh-0.20.
1104 * Added configure option --with-pager=PAGER.
1106 * Added configure option --with-editor=EDITOR.
1108 * Changed the default format file for mhl (mhl.format) to
1109 also ignore (not display) the header fields Content-Type,
1110 Content-Transfer-Encoding, and Content-ID
1112 * Fixed core dump in addrsbr.c when using %(proper) format function
1113 and the To: line was missing.
1115 * Added the file ZSH.COMPLETION to the distribution.
1117 1998-01-04 Richard Coleman <coleman@math.gatech.edu>
1119 * Released nmh-0.20-pre2.
1121 * Added new switch -snoop to both `msgchk' and `inc', so you can
1122 watch the POP transaction.
1124 * Changed "replgroupcomps" to check for Mail-Followup-To header
1125 first, and use it if available.
1127 * Changed "replcomps" to check for Mail-Reply-To header
1128 first, and use it if available.
1130 1998-01-03 Richard Coleman <coleman@math.gatech.edu>
1132 * Released nmh-0.20-pre1.
1134 * Changed seq_list.c to dynamically enlarge the buffer for
1135 collecting the message ranges in a long sequence line.
1136 This should remove the last hard limit on the size of a
1139 * Changed seq_read.c so that can read long sequence lines.
1140 It will use multiple calls to m_getfld() when m_getfld()
1141 returns the state FLDPLUS.
1143 * Changed brkstring.c to dynamically add more space for pointers
1144 if necessary. This is needed when splitting up large sequence
1147 * Did some small cleanups in seq_save.c.
1149 * Added new switches `-[no]unseen' to rcvstore, to control
1150 whether new messages are added to Unseen-Sequence.
1152 * Moved locking routines (zotnet/mts/lock.c) to sbr/lock_file.c
1154 * Changed the internal UNSEEN flag to SELECT_UNSEEN which is
1155 more appropriate. Changed the MHPATH flag to ALLOW_NEW.
1157 * Changed "replcomps" to not include CC and TO lines so that
1158 that reply message is only directed at the author of the
1159 message to which you are replying.
1161 * Added new switch `-group' to command repl, which causes repl
1162 to use new forms file "replgroupcomps". This is intended for
1163 making group replies.
1165 * Removed #ifdef for ATHENA.
1167 1997-12-28 Richard Coleman <coleman@math.gatech.edu>
1169 * Released nmh-0.19.
1171 * Fix repl,forw so that switch `-form file' will not abort
1172 as ambiguious (silly mistake on my part).
1174 * Cleaned up the mhn man page. Added info about a few escapes
1175 for the formatting/display strings that were not documented
1176 (%%, %t). Moved the BNF grammar for the mime composition file,
1177 to the end of the man page.
1179 * Added the options -[no]format to the command repl. The
1180 switch `-format' will filter the message to which you are
1181 replying with the standard message filter "mhl.reply", which
1182 is now included in the distribution. The `-noformat' option
1183 will negate the use of -format or -filter and not include
1184 the message to which you are replying in the draft.
1186 * Did some cleaning and reorganization on many of the man
1189 * Added debugging switch `-debug' to mhparam, which displays
1190 the values of all `procs' (and some other misc configuration
1191 info) that nmh keeps in global variables.
1193 * When using `refile -preserve', if a conflict occurs, then use
1194 the next available number above the message number you wish
1197 * In forw.c, split the code for creating MIME style forwarding
1198 out of copy_draft, and into copy_mime_draft.
1200 * Move routines in mark.c to print sequences, into new
1201 file sbr/seq_print.c
1203 * flist will now update the current folder.
1205 * Added the switches -[no]fast to flist, to replace
1206 -[no]total. The previous switches are still accepted
1207 but now undocumented.
1209 * More reorganization in flist of the code for
1212 * The command "flist +foo -all" will now scan the folder
1213 "foo" and all its 1st level children.
1215 * Add missing include file <h/mh.h> to sbr/snprintf.c
1217 * Fix alarm bug in rcvtty, so that when it calls external
1218 process, the alarm is never longer than 30 minutes.
1220 1997-12-17 Richard Coleman <coleman@math.gatech.edu>
1222 * Released nmh-0.18.
1224 * Fixed bug in mark, so that "mark -list -seq foo" will
1225 correctly indicate if "foo" is a private sequence. I found
1226 this bug mentioned in Jerry Peek's book.
1228 * Simplified the code in seq_setcur(), since seq_addmsg() now
1229 retains the public/private status of sequences.
1231 * Changed sequence handling so that if the switches -public
1232 or -nopublic, are not specified for the commands mark, pick,
1233 or rcvstore, then existing sequences will retain their
1234 previous public/private status.
1236 * mhparam now handles the mh-sequences profile entry
1239 * flist -all will now also check readonly folders (for
1242 * Improve the leaf optimization for folder command.
1243 It will now track the number of directories in a folder,
1244 and stop stat'ing files once it has hit all the subfolders.
1246 * Renamed m_getfolder to getfolder. Changed getfolder to
1247 take option to determine whether it should get current
1248 folder, or just default folder (Inbox). Changed rcvstore,
1249 inc, and rmf to use the new getfolder.
1251 * flist now indicates if a sequence is private.
1253 * Change WUNTRACED to 0, in pidwait.c, so that commands will
1254 wait for stopped processes.
1256 * conflict will dynamically allocate space for group names,
1257 so it can now handle system with more than 100 groups.
1259 1997-12-09 Richard Coleman <coleman@math.gatech.edu>
1261 * Released nmh-0.18-pre4.
1263 * Check if we have enough message status space, before we
1264 call folder_realloc() in burst, mhpath, and m_draft().
1266 * mhn will now correctly identify a formatting string of "-"
1267 for the option -store, and send content to stdout.
1269 * Change the way that memory for message status is
1270 allocated. It is dynamcially allocated separately from
1271 the folder/message structure. This required changing
1272 folder_read.c, folder_realloc.c, folder_free.c.
1274 * Removed all the MTR code (experimental code for message
1277 * Renamed m_readfolder.c to folder_read.c and simplified
1280 * Renamed m_freefolder.c to folder_free.c.
1282 * Add function trim() to slocal.c to pretty print
1283 the debugging output.
1285 * Changed the name of m_packfolder() to folder_pack().
1286 Changed the name of m_remsg() to folder_realloc().
1288 Wed Dec 3 23:33:38 1997 Richard Coleman <coleman@math.gatech.edu>
1290 * Released nmh-0.18-pre3.
1292 * Changed installation to add `flists' which is hard linked
1293 to `flist'. This is a equivalent to `flist -all'.
1295 * For flist, -showzero is on by default.
1297 * Major changes to flist. Default is now for flist to search
1298 current folder. The switch `-all' is now used to specify
1299 searching all top level folders. The new switch `-showzero'
1300 is used to print out folders that don't contain any messages
1301 in the given sequence.
1303 * Split BuildFolderList in flist.c into 2 functions
1304 (BuildFolderList, BuildFolderListR). Changed these functions
1305 so that flist now does better leaf optimization, and will stop
1306 stat'ing directory entries when it knows it has hit all the
1307 subdirectories of a given directory.
1309 * Reorganized code in folder.c, so that all relevant folders
1310 are scanned first and information recorded. Then all the
1311 folder summaries at printed out at one time.
1313 * Made the options of folder(s) more orthogonal. Now
1314 "folder -all -noheader -nototal" will do the right thing.
1316 * Added `-noall' switch to folder, for completeness.
1318 * Changed the default mode for creation of new folders
1321 * Slightly changed the format for flist. It now indicates
1322 if a folder is current. Also the width of the various
1323 fields are now calculated at runtime.
1325 * Changed the format for folder(s). Folder names
1326 are now left justified. The width of the various fields
1327 are calculated at runtime.
1329 Sun Nov 30 19:14:53 1997 Richard Coleman <coleman@math.gatech.edu>
1331 * Released nmh-0.18-pre2.
1333 * Add paragraph to man page for install-mh and to INSTALL file
1334 about checking for global mh.profile.
1336 * Renamed m_find() to context_find().
1337 Renamed m_replace() to context_replace().
1338 Renamed m_delete() to context_del().
1339 Renamed m_update() to context_save().
1340 Renamed m_getdefs() to context_read().
1341 Renamed m_foil() to context_foil().
1343 * Change rcvstore to use routine folder_addmsg(), instead of
1344 adding message to folder itself.
1346 * Changed refile, so that if the switch -preserve is used,
1347 and a conflict occurs for a particular folder, then folder_addmsg()
1348 will just use next highest available number for that folder,
1351 * Make folder_addmsg() more robust. It will make repeated
1352 attempts to link file into folder if link returns with
1355 * Fix bug, so that that if forking sendmail, HELO will be sent
1356 unless clientname: option is defined but empty (so now it
1357 is the same as the direct smtp code).
1359 * Changed sprintb to snprintb (now we pass the buffer length
1360 to new routine). Changed code to use new function.
1362 * Added snprintf to sbr. Added configure check to build it
1363 if you don't have a native version (but haven't changed much
1364 code to use it yet).
1366 Thu Nov 13 18:42:18 1997 Richard Coleman <coleman@math.gatech.edu>
1368 * Released nmh-0.18-pre1.
1370 * Fixed alarm bug in slocal, so that alarm is never
1371 called with a value larger than 30 mintues.
1373 * Fixed race condition in rmm and refile, so that
1374 context is updated before external rmmproc is called.
1376 * Removed all the OVERHEAD code.
1378 * Move code to add message to folder from refile.c
1381 Fri Jul 25 19:39:29 1997 Richard Coleman <coleman@math.gatech.edu>
1383 * Did some rearranging of the internals of inc.c.
1385 * Make -inplace the default for anno, forw, dist, and repl.
1387 * Changed --enable-smtp to --with-mts={smtp,sendmail}
1389 * Created new directory mts/sendmail for direct sendmail
1390 interface (although it currently still uses SMTP).
1392 * Removed all the TMA (trusted mail agent) code
1394 * Removed all the TTYD (terminal access daemon) code
1396 * Removed all the MF (uucp filtering) code.
1398 * Removed all the code for BERK.
1400 * Removed all the code for stand-alone delivery (MHMTS).
1402 * Split the file mts/sendmail/smail.c into sendmail.c and
1403 smtp.c. Changed the name of the directory to mts/smtp.
1405 * Changed autoconf to use @sysconfdir@ for location of
1406 configuration files.
1408 * Changed #define in mhn.c from FTP to BUILTIN_FTP.
1410 Mon Jul 21 03:22:34 1997 Richard Coleman <coleman@math.gatech.edu>
1412 * Released nmh-0.17.
1414 * MAKEDEFS weren't passed down to recursive makes correctly.
1416 * slocal.c now checks for UTMP_FILE and _PATH_UTMP instead
1417 of hard-coding "/etc/utmp".
1419 * rcvtty.c check for _PATH_UTMP if UTMP_FILE is not
1422 * Remove configure checks for ulong and ushort. Changed
1423 code to just use unsigned {short, long}.
1425 * Change addmsg function in refile.c to return new
1426 number of refiled message.
1428 * Added check in get_returnpath for empty unixbuf.
1430 * Cleanup of sbr/pidstatus to use more POSIX macros
1431 for return value of wait().
1433 * Change configure to also check /bin for "more".
1435 Sat Jul 12 00:02:23 1997 Richard Coleman <coleman@math.gatech.edu>
1437 * Released nmh-0.16.
1439 Mon Jun 23 20:13:24 1997 Richard Coleman <coleman@math.gatech.edu>
1441 * Added automimeproc, which should replace automhnproc.
1443 * multipart messages will no longer abort for messages
1444 of type 8bit or binary (although we still can't really
1445 deal with binary messages, yet).
1447 * Fix double free of c_storage. From John MacMillan.
1449 * mhn now treats unknown subtypes of "text" as text/plain.
1451 * mhn changed so that specifying mhn-show-multipart, or
1452 mhn-show-multipart/{mixed, alternate, etc...) will override
1453 the use of the internal method for displaying these types.
1454 Previously mhn would always use the internal method for subtypes
1455 mixed, alternate, digest, and parallel (even if an alternate
1456 method was specified in mhn.defaults).
1458 * mhn show treats unknown subtypes of multipart, as type
1459 multipart/mixed (as specified RFC2046).
1461 * mhn checks for the parameter "name" rather than "x-name".
1462 From MH-6.8.4 patch.
1464 * Fix double free of ctinfo in user_content when using
1465 #forw with single message. From John MacMillan (and
1468 * Changed -mhnproc switch for show, to -showmimeproc.
1470 * Changed profile entry "mhnproc" to "showmimeproc".
1472 * Added "mime" option to "whatnow", which calls the program
1473 "buildmimeproc" (default is mhn -build) to process MIME
1476 * Added -build switch to mhn, to process MIME composition
1479 * Did some reorganizing of mhn.c.
1481 * Changed casting in mts/sendmail/smail.c from (char) to
1482 (signed char) so SMTP reply codes work correctly for machines
1483 which used unsigned chars by default.
1485 Sat Jun 21 01:21:47 1997 Richard Coleman <coleman@math.gatech.edu>
1487 * Released nmh-0.15.
1489 * Added new form "scan.unseen" to distribution. It marks messages
1490 which are in any sequence in Unseen-Sequence.
1492 * Do some rearranging of date/time code in zotnet/tws/dtime.c
1494 * Fix sign extension bugs in fmt_scan.c.
1496 * Fix m_atoi.c so that strings ending in non-digit characters
1499 * Split code in burst.c so that finding delimiters of digested
1500 messages and bursting a message into multiple messages are
1501 two separate functions (find_delim and burst).
1503 * Add workaround fo AC_PATH_PROG in configure.in, so
1504 that BSD4.4 machines can find sendmail, vi, more.
1506 * Added "-width" option to rcvtty.
1508 * Change a few variable names in zotnet/mts/client.c since
1509 they conflict with defines on AIX.
1511 * Makefile in zotnet/tws assumes lexing of dtimep.lex was
1512 unsuccessful if resulting file is less than 500 lines long
1513 (rather than 10, which was previous value), since AIX
1514 sed gives mangled file of about 200 lines.
1516 * Extract code in rcvstore.c to link message into folder,
1517 and put in own subroutine.
1519 * Extract code in refile.c to link message into folder,
1520 and put in own subroutine.
1522 * Moved code to remove messages from folder into own
1523 routine "folder_delmsgs" in sbr. Changed rmm.c and
1524 refile.c to use new routine.
1526 Fri May 16 06:09:31 1997 Richard Coleman <coleman@math.gatech.edu>
1528 * Renamed m_seqok to seq_nameok.
1530 * Changed m_setunseen, msh, mshcmds, flist, and scan to use
1533 * Changed m_seqflag to return the number of a sequence rather
1534 than its bit flag. Changed its name to seq_getnum and renamed
1535 file to sbr/seq_getnum.c.
1537 * Removed function m_seqnew and file sbr/m_seqnew.c since it is
1540 * Added zero switch to m_seqadd function to zero out bits before
1541 adding message to sequence.
1543 * Renamed function m_setvis to m_setunseen, and renamed
1544 corresponding file in sbr.
1546 * Renamed function m_setseq to m_setprev, and renamed corresponding
1549 * Changed mark.c and pick.c to use m_seqaddsel and m_seqdelsel.
1551 * Added new function m_seqdelsel to m_seqdel.c, which deletes
1552 all selected messages from a sequence.
1554 * Added new function m_seqaddsel to m_seqadd.c, which adds all
1555 selected messages to a sequence.
1557 * Split sbr/m_seqnew.c into m_seqadd.c, m_seqdel.c, m_seqnew.c,
1560 Thu May 15 00:53:17 1997 Richard Coleman <coleman@math.gatech.edu>
1562 * Renamed function pack_folder to m_packfolder, and moved it
1563 from uip/folder.c into its own file sbr/m_packfolder.c
1565 Wed May 14 23:38:00 1997 Richard Coleman <coleman@math.gatech.edu>
1567 * Changed function m_gmsg to m_readfolder. Renamed file
1568 sbr/m_gmsg.c to sbr/m_readfolder.c.
1570 Mon May 5 19:57:11 1997 Richard Coleman <coleman@math.gatech.edu>
1572 * Expanded rcvtty man page, and added small patch from
1573 MH-6.8.4 distribution.
1575 Fri May 2 15:24:34 1997 Richard Coleman <coleman@math.gatech.edu>
1577 * Released nmh-0.14.
1579 * Comment out configure test and code for tgetent to allocate its
1580 own termcap buffer when passed a NULL argument.
1582 Sat Apr 26 03:46:38 1997 Richard Coleman <coleman@math.gatech.edu>
1584 * Added new options `-checkmime', `-nocheckmime', and `-mhnproc'
1585 to show. Restructured code to handle options to various
1586 `procs' better. Deprecated `-noshowproc' option and NOMHNPROC
1587 environment variable.
1589 * Added new man page `mh-draft' which documents the
1590 draft folder facility in nmh.
1592 * Renamed fmtsbr.h to fmt_scan.h. Renamed fmtcompile.h
1595 * split fmtsbr.c into fmt_scan.c and fmt_new.c. Renamed
1596 fmtcompile.c to fmt_compile.c, and formataddr.c to
1599 * `send -help' wasn't showing the -(no)mime and -split
1602 Fri Apr 25 02:50:36 1997 Richard Coleman <coleman@math.gatech.edu>
1604 * Released nmh-0.13.
1606 * Changed mhpath so it doesn't abort if a message sequence
1607 such as "mhpath all" expands to more than 1000 messages.
1608 Also mhpath now dynamically reallocated space for message
1609 names (The number of command line arguments is still limited
1612 * Did some general restructuring of the code in folder.c
1613 that checks for folder information, and prints it.
1615 Thu Apr 24 01:04:37 1997 Richard Coleman <coleman@math.gatech.edu>
1617 * Changed `folder' to reallocate space for folder names if
1618 necessary. So `folders' can now handle more than 300 folders.
1620 Tue Apr 22 14:01:26 1997 Richard Coleman <coleman@math.gatech.edu>
1622 * Change configure to use a compile check to see if the tm struct
1623 has tm_gmtoff, rather than using egrep.
1625 Mon Apr 21 02:19:17 1997 Richard Coleman <coleman@math.gatech.edu>
1627 * Released nmh-0.12.
1629 * Had set_exists and unset_exists macros backwards.
1631 * Released nmh-0.11.
1633 Thu Apr 10 02:39:53 1997 Richard Coleman <coleman@math.gatech.edu>
1635 * Added documentation to mh-profile.man about the various
1636 `procs' (mhlproc, showproc, lproc, etc...).
1638 * Replace the bit twiddling for SELECTED, UNSEEN, and
1639 mp->attrstats with macros.
1641 * If system doesn't have SIGEMT (like Linux), then use SIGTERM
1644 * Change fstat to stat in m_gmsg.c since Linux wants
1647 * Merge Linux patch sent in by Michel Oosterhof (original
1648 patch from bsa@kf8nh.wariat.org).
1650 * Document an undocumented MH feature. mhn -form mhl.null
1651 will suppress the display of the message header.
1653 * mhparam will now return "mhparam etcdir".
1655 * Add catproc to /config/config.c and use that in show.c
1656 and mshcmds.c, rather than hard coding in /bin/cat.
1658 * Add mhnproc to the list of `procs' in mh-profile.man.
1660 * Add configure test for lorder and tsort commands.
1662 * Commented out the padding in the `msgs` struct in h/mh.h
1664 * Change m_gmsg.c to allocate elements to the `info' array by
1665 500 elements at a time (rather than MAXFOLDERS / 5).
1667 * Add note to man page for mhmail that zero length messages are
1668 not sent. Need to use -body "" to send empty messages.
1670 * zotnet/mts/mts.c : compare character with '\0', not NULL.
1672 * sbr/getcpy.c : assign '\0' to character, not NULL.
1674 * add m_fmsg to most programs in uip so that they explicitly free
1675 folder/message structure when done with folder.
1677 * uip/slocal.c : cleanup processing of sender. Make sure it is
1678 defined even if message is missing "From " line.
1680 Mon Mar 31 03:37:35 1997 Richard Coleman <coleman@math.gatech.edu>
1682 * Released nmh-0.10.
1684 Sun Mar 30 21:46:17 1997 Richard Coleman <coleman@math.gatech.edu>
1686 * Add configure check for <locale.h>. Turn on LOCALE support
1689 Thu Mar 20 03:21:24 1997 Richard Coleman <coleman@math.gatech.edu>
1691 * Reversed previous decision to retain "From " lines in slocal.
1692 The "From " line is now removed from all messages.
1694 * inc now saves the date from the "From " envelope in the
1695 Delivery-Date header for all messages.
1697 * sbr/m_getfld.c: Clean up processing of Return-Path and
1698 Delivery-Date from the "From " envelope.
1700 Mon Mar 17 19:03:36 1997 Richard Coleman <coleman@math.gatech.edu>
1702 * client.c: cast iaddr to int before comparing return value
1703 of inet_addr with NOTOK.
1705 Tue Mar 11 04:38:10 1997 Richard Coleman <coleman@math.gatech.edu>
1707 * Grep test for signal names was failing on some OS'es because
1708 of missing tabs in regex.
1710 Sat Mar 8 01:58:22 1997 Richard Coleman <coleman@math.gatech.edu>
1712 * Released nmh-0.09.
1714 * Move config files and format files to *.old before installing.
1716 * Add configure check for killpg.
1718 * msh.c: include <termios.h> instead of <termio.h> and
1721 * prompter.c: don't include <sys/ioctl.h> anymore.
1723 Thu Mar 6 04:03:24 1997 Richard Coleman <coleman@math.gatech.edu>
1725 * Added `-mime' and `-nomime' options to `repl'.
1728 Tue Mar 4 03:10:37 1997 Richard Coleman <coleman@math.gatech.edu>
1730 * ruserpass.c : removed conflicting prototypes.
1732 * rcvtty.c : Fixed rcvtty to obey terminal permissions granted
1733 by `mesg' command. Previously only worked on BSD machines.
1735 Mon Mar 3 00:18:59 1997 Richard Coleman <coleman@math.gatech.edu>
1737 * rcvtty.c : Changed to use #define UTMP_FILE (if exists) rather
1738 than hard coded "/etc/utmp".
1740 * Released nmh-0.08.
1742 * Changed slocal to lock .maildelivery (or file given by -maildelivery)
1743 when accessing ndbm/db file for duplicate suppression, instead of
1744 locking database itself.
1746 Thu Feb 27 05:28:09 1997 Richard Coleman <coleman@math.gatech.edu>
1748 * Added slocal action `mmdf' to deliver to a file in mmdf format.
1750 * Changed the slocal actions `file' and `>' to always deliver in
1751 mbox (uucp) format rather than be determined by RPATHS config
1754 * Changed the slocal action `mbox' to deliver in mbox (uucp) format
1755 rather than mmdf format.
1757 * slocal now adds Delivery-Date field to all messages (previously it
1758 only added it to messages when delivering them to a file). The
1759 "From " line is now retained on all messages if compiling with
1760 RPATHS, rather than being discarded.
1762 * rcvpack no longer adds the Delivery-Date field to messages.
1764 Sun Feb 23 22:03:54 1997 Richard Coleman <coleman@math.gatech.edu>
1766 * Removed the script packmbox, since it's functionality has been
1769 * Changed packf so that it uses mbox (uucp) format by default
1770 rather than mmdf format. Added options -mbox and -mmdf to
1771 packf so you can choose the preferred format.
1773 * Changed rcvpack so that it uses mbox (uucp) format by default
1774 rather than mmdf format. Added options -mbox and -mmdf to
1775 rcvpack so you can choose the preferred format.
1777 Tue Feb 18 00:01:05 1997 Richard Coleman <coleman@math.gatech.edu>
1779 * Changed nmh to use dot locking by default (although you
1780 can still easily change this in config.h).
1782 * Simplified locking code. Removed code allowing setting of
1783 locking type in mts.conf. Now the locking type and locking
1784 directory (if any) can only be set at compile time.
1786 Fri Feb 14 02:49:18 1997 Richard Coleman <coleman@math.gatech.edu>
1788 * Prefer getting timezone information from tm->gmtoff rather
1789 than tzset and external timezone variable.
1791 Thu Feb 13 00:35:45 1997 Richard Coleman <coleman@math.gatech.edu>
1793 * Fixed typo in ruserpass.c in the variable toktabs.
1795 * When ruserpass was added to LIBOBJS, it was missing
1798 * Released nmh-0.07.
1800 Tue Feb 11 01:29:47 1997 Richard Coleman <coleman@math.gatech.edu>
1802 * Add check to configure, so that if ruserpass, or _ruserpass
1803 is not found, build version of ruserpass in sbr.
1805 * Added define's to discard.c, m_getfld.c, and scansbr.c so
1806 the code that manipulates internals of stdio, will build
1809 * Added #define to control whether to compile the simple
1810 built-in FTP client in mhn.
1812 * Added configure check for ushort and ulong. Change code
1813 to use ushort/ulong rather than u_short/u_long.
1815 * A couple of small cleanups in locking code.
1817 * Added configure check for gmtoff element in struct tm.
1819 * Added configure check for tzset.
1821 Fri Feb 7 03:01:57 1997 Richard Coleman <coleman@math.gatech.edu>
1823 * Released nmh-0.06.
1825 * Removed code for machines that don't have socket
1826 interface (how could they get mail anyway?).
1828 * Removed code for BSD41 machines. I don't think there are
1829 many such machines around anymore.
1831 * Add configure check for function uname, and prefer it
1832 over gethostname. General cleanup of zotnet/mts/mts.c.
1834 * Change all `lseek' calls to use POSIX symbolic constants
1835 SEEK_SET, SEEK_CUR, SEEK_END.
1837 Thu Feb 6 01:16:30 1997 Richard Coleman <coleman@math.gatech.edu>
1839 * Check lex generated file in zotnet/tws and use
1840 pre-generated version if necessary.
1842 * Released nmh-0.05.
1844 * Change to use reliable signals on all platforms that have
1845 sigaction. Change so that interrupted system calls are
1846 restarted for all signals except SIGALRM. This fixes alarm
1847 handling code in smail.c for BSD based systems.
1849 * Added lorder and tsort commands so that created libs can
1850 be linked in one pass.
1852 Tue Feb 4 01:33:00 1997 Richard Coleman <coleman@math.gatech.edu>
1854 * Changed pidwait so that while it is waiting for a child,
1855 it should block signals rather than ignore them.
1857 Mon Feb 3 21:05:30 1997 Richard Coleman <coleman@math.gatech.edu>
1859 * Add checks to configure for dbm_open and -lndbm.
1861 Thu Jan 30 05:15:42 1997 Richard Coleman <coleman@math.gatech.edu>
1863 * folder -pop and folder -push were freeing some memory too
1864 quickly, which caused the entry popped from the stack to not
1865 become the current folder.
1867 Wed Jan 29 01:28:02 1997 Richard Coleman <coleman@math.gatech.edu>
1869 * Released nmh-0.04.
1871 * Define ospeed and PC in termsbr.c is OS doesn't have
1874 Sun Jan 26 20:25:10 1997 Richard Coleman <coleman@math.gatech.edu>
1876 * editfile will create a symbolic link to the altmsg if it
1877 can't make a link, on any machine supporting lstat. Formerly
1878 this would happen only on BSD42 based machines.
1880 Sat Jan 25 22:54:26 1997 Richard Coleman <coleman@math.gatech.edu>
1882 * traverse (in popsbr.c) wasn't calling va_start before using
1883 variable argument list. Fixes core dump in inc when using POP.
1885 Fri Jan 24 03:27:59 1997 Richard Coleman <coleman@math.gatech.edu>
1887 * The variable pass in remotemail needed to be set to
1888 NULL. (From MH-6.8.4 diff). Fixes core dump of msgchk when
1891 * inc and msgchk were using -rpop by default when configured
1892 with POP support. Default is now -norpop.
1894 Thu Jan 23 02:01:17 1997 Richard Coleman <coleman@math.gatech.edu>
1896 * By default, post will now give the SMTP HELO command with
1897 the local hostname. If you specify a hostname with the
1898 clientname: option in mts.conf file, post will give the
1899 HELO command with that name instead. If the argument to the
1900 clientname: option is empty, no HELO command is given.
1901 (From the MH-6.8.4 diff)
1903 Wed Jan 22 01:55:45 1997 Richard Coleman <coleman@math.gatech.edu>
1905 * When using `-help' for a command, it will also print its
1906 profile compents from .mh_profile. (From MH-6.8.4 diff)
1908 * "slocal -file" will now correctly takes its input from
1909 a file (currently need to specify full path).
1911 Sun Jan 19 20:37:21 1997 Richard Coleman <coleman@math.gatech.edu>
1913 * "slocal -debug" will now issue a warning if a non-blank
1914 line in the .maildelivery file has less than 5 fields.
1916 Sat Jan 18 02:26:41 1997 Richard Coleman <coleman@math.gatech.edu>
1918 * Changed slocal so that code for duplicate suppression
1919 (MH config was MSGID) is always built. Added the options
1920 -[no]suppressdup to slocal to turn this on/off.
1922 Thu Jan 16 00:26:34 1997 Richard Coleman <coleman@math.gatech.edu>
1924 * Released nmh-0.03.
1926 * Fixed problem where mark would core dump if no
1927 .mh_sequence file existed.
1929 * Fixed problem where slocal would core dump if -debug
1930 option was given, and certain headers were missing.
1932 * Added patch to slocal to add `folder' (+) action, which
1933 is shorthand for piping message to rcvstore. Updated
1936 Wed Jan 15 21:30:17 1997 Richard Coleman <coleman@math.gatech.edu>
1938 * Changed flist option -unseen to -[no]all. Cleaned up
1941 Fri Jan 10 20:36:33 1997 Richard Coleman <coleman@math.gatech.edu>
1943 * Fixed flist. Changed the profile component `Folder-Order'
1944 to `Flist-Order. Added option `-sequence' to flist, so
1945 you can specify the name of the sequence to search for.
1947 Thu Jan 9 00:20:48 1997 Richard Coleman <coleman@math.gatech.edu>
1949 * A few minor portability cleanups. Changed to use PATH_MAX
1950 rather than MAXPATHLEN. Don't assume ospeed variable exists
1951 in termsbr.c. Removed some conflicting prototypes.
1953 Wed Jan 8 11:05:02 1997 Richard Coleman <coleman@math.gatech.edu>
1955 * Add configure test to check if tgetent will accept NULL
1956 and allocate its own buffer. Borrowed from zsh.
1958 * Changed libpath to etcpath.
1960 Mon Jan 6 04:15:35 1997 Richard Coleman <coleman@math.gatech.edu>
1962 * Cleaned up source code and Makefiles, so that if your `make'
1963 supports the VPATH option, you can build nmh in a different
1964 directory from where the source code is located.
1966 Fri Jan 3 05:05:18 1997 Richard Coleman <coleman@math.gatech.edu>
1968 * Released nmh-0.02.
1970 Wed Jan 1 17:41:52 1997 Richard Coleman <coleman@math.gatech.edu>
1972 * Split mhook man page into man pages for rcvdist, rcvpack,
1975 Tue Dec 31 03:07:48 1996 Richard Coleman <coleman@math.gatech.edu>
1977 * Changed code to use strerror, rather than using sys_errlist
1978 and sys_nerr directly.
1980 Mon Dec 30 02:15:25 1996 Richard Coleman <coleman@math.gatech.edu>
1982 * -compat switch from install-mh removed.
1984 * Changed the default POP port from "pop" to "pop3".
1986 Sat Dec 28 13:25:05 1996 Richard Coleman <coleman@math.gatech.edu>
1988 * Changed mhn_defaults to mhn.defaults. Changed create_mhn_defaults
1989 (again) to mhn.defaults.sh. Changed find_program (again) to
1990 mhn.find.sh. mhn.defaults.sh now takes the search path
1991 as an argument. Default search path is now specified in Makefile
1992 rather than in script.
1994 Fri Dec 27 16:34:01 1996 Richard Coleman <coleman@math.gatech.edu>
1996 * Changed mtstailor file to mts.conf. Updated man pages.
1998 * Changed si_value to si_val in mhn.c, since it conflicts with
1999 macro defined on Solaris.
2001 Thu Dec 26 02:50:15 1996 Richard Coleman <coleman@math.gatech.edu>
2003 * Added --enable-nmh-mhe (and --disable-nmh-mhe) to enable/disable
2004 support for Emacs front-end mhe. It is on by default.
2006 * Added the following configure options: --enable-nmh-pop to
2007 enable client side pop support, --enable-nmh-smtp to enable
2008 SMTP support. Client-side pop support now compiles. Man
2009 pages for inc, msgchk, mh-chart now correctly added pop
2012 Tue Dec 24 14:33:20 1996 Richard Coleman <coleman@math.gatech.edu>
2014 * Added configure test for bug in C libraries where linker
2015 can't find ruserpass, but can find _ruserpass.
2017 * Fixed configure test so that termcap variable ospeed is
2020 Mon Dec 23 19:40:17 1996 Richard Coleman <coleman@math.gatech.edu>
2022 * Source files converted to ANSI C.
2024 * md5 now compiled separately rather than being included
2025 in mhn.c. Changed md5 to use memset and memcpy.
2027 Fri Dec 20 02:29:37 1996 Richard Coleman <coleman@math.gatech.edu>
2029 * Collected the error routines adios, advise, admonish, and advertise
2030 into one file (error.c), and did some rearranging of the code.
2032 Thu Dec 19 19:05:29 1996 Richard Coleman <coleman@math.gatech.edu>
2034 * Added awk script sigmsg.awk (originally written by
2035 Geoff Wing <mason@werple.apana.org.au> for zsh) to
2036 automatically generate signal messages for pidstatus.c.
2037 Added files sbr/signals.c, h/signals.h. Code now uses
2038 sigprocmask to block signals (if available). Code now uses
2039 signal blocking on non-BSD machines.
2041 Wed Dec 18 01:55:17 1996 Richard Coleman <coleman@math.gatech.edu>
2043 * Add configure check for ATTVIBUG. From Soren's mh autoconf work.
2045 * Released nmh-0.01.
2047 * Added configure code to check for type of signals functions
2048 you have (POSIX or BSD style signals). Added function
2049 SIGPROCMASK to simulate sigprocmask on machines that don't
2052 Fri Dec 13 19:40:48 1996 Richard Coleman <coleman@math.gatech.edu>
2054 * Added -version switch to all commands. Also added to
2057 Mon Dec 9 16:36:54 1996 Richard Coleman <coleman@math.gatech.edu>
2059 * Renamed uip/trmsbr.c to termsbr.c and changed it to use
2060 POSIX termios.h style functions if present.
2062 Tue Dec 3 16:18:39 1996 Richard Coleman <coleman@math.gatech.edu>
2064 * Changed support/general/bootmhn.sh to output new mhn_defaults
2065 file to standard output by default (makes it easier for testing).
2066 Changed name of script to create_mhn_defaults. Changed bootmhn.findit
2067 script to find_program.
2069 Sun Dec 1 10:00:00 1996 Richard Coleman <coleman@math.gatech.edu>
2071 * Added patch to uip/folder.c from exmh distribution to
2072 speed up -recurse option.
2074 * Added flist command from exmh distribution. It doesn't work
2075 yet, but it compiles :-)
2077 * Changed default location for install to
2078 /usr/local/nmh/{bin,etc,lib,man}. Split files so that format
2079 and configuration files go in nmh/etc, and support binaries go
2080 in nmh/lib. Of course, all this can now be changed in the top
2083 * Started with mh-6.8.3 as based and converted to autoconf.
2084 Rewrote all the Makefiles. Currently only works with sendmail/smtp.
2085 Pop support and plenty of other things, are now broken.
projects / mmh / blob