1 /* config.h.in. Generated automatically from configure.in by autoheader. */
3 /****** BEGIN USER CONFIGURATION SECTION *****/
6 * IMPORTANT: You should no longer need to edit this file to handle
7 * your operating system. That should be handled and set correctly by
10 * These are slowly being phased out, but currently
11 * not everyone is auto-configured. Then decide if you
12 * wish to change the features that are compiled into nmh.
16 * Turn on locale (setlocale) support
21 * Define to 1 the type of file locking to use. You need to
22 * make sure the type of locking you use is compatible with
23 * other programs which may modify your maildrops.
24 * Currently you can only use one type.
27 /* #define FCNTL_LOCKING 1 */
28 /* #define LOCKF_LOCKING 1 */
29 /* #define FLOCK_LOCKING 1 */
32 * If you have defined DOT_LOCKING, then the default is to
33 * place the lock files in the same directory as the file that
34 * is to be locked. Alternately, if you define LOCKDIR, you
35 * can specify that all lock files go in a specific directory.
36 * Don't define this unless you know you need it.
38 /* #define LOCKDIR "/usr/spool/locks" */
41 * Define this if your passwords are stored in some type of
42 * distributed name service, such as NIS, or NIS+.
47 * Directs nmh not to try and rewrite addresses
48 * to their official form. You probably don't
49 * want to change this without good reason.
54 * Define this if you do not want nmh to attach the local hostname
55 * to local addresses. You must also define DUMB. You probably
56 * dont' need this unless you are behind a firewall.
58 /* #define REALLYDUMB 1 */
61 * Directs inc/slocal to extract the envelope sender from "From "
62 * line. If inc/slocal is saving message to folder, then this
63 * sender information is then used to create a Return-Path
64 * header which is then added to the message.
69 * If defined, slocal will use `mbox' format when saving to
70 * your standard mail spool. If not defined, it will use
76 * If this is defined, nmh will recognize the ~ construct.
81 * Compile simple ftp client into mhn. This will be used by mhn
82 * for ftp access unless you have specified another access method
83 * in your .mh_profile or mhn.defaults. Use the "mhn-access-ftp"
84 * profile entry to override this. Check mhn(1) man page for
90 * If you enable POP support, this is the the port name
91 * that nmh will use. Make sure this is defined in your
92 * /etc/services file (or its NIS/NIS+ equivalent). If you
93 * are using KPOP, you will probably need to change this
96 #define POPSERVICE "pop3"
99 * Define the default creation modes for folders and messages.
101 #define DEFAULT_FOLDER_MODE "0700"
102 #define DEFAULT_MESSAGE_MODE "0600"
105 * The prefix which is prepended to the name of messages when they
106 * are "removed" by rmm. This should typically be `,' or `#'
108 #define BACKUP_PREFIX ","
111 * Name of link to file to which you are replying.
116 * If wait/waitpid returns an int (no union wait).
120 /* The following are autoconfigured, but you may wish to override the
121 * decisions of autoconf (and AC_CANONICAL_SYSTEM) and do your own
122 * thing. If so, you can modify the definitions. The Comments are as
125 /* these three are only used in vmh.c, which currently is not being
126 * built anyway. -Doug */
127 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX, SCO5 */
129 /* Defined for Solaris 2.x, Irix, OSF/1, HP-UX, AIX */
131 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS */
134 /* Defined for SunOS 4, FreeBSD, NetBSD, OpenBSD, BSD/OS -- does
135 * PicoBSD have uname? :) */
138 /* Defined for SCO5 */
141 /* This tells nmh to use the Linux _IO_*_ptr defines from libio.h */
145 /***** END USER CONFIGURATION SECTION *****/
147 /* Define to empty if the keyword does not work. */
150 /* Define to `int' if <sys/types.h> doesn't define. */
153 /* Define if your struct stat has st_blksize. */
154 #undef HAVE_ST_BLKSIZE
156 /* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
157 #undef HAVE_SYS_WAIT_H
159 /* Define if you have <vfork.h>. */
162 /* Define to `int' if <sys/types.h> doesn't define. */
165 /* Define to `long' if <sys/types.h> doesn't define. */
168 /* Define to `int' if <sys/types.h> doesn't define. */
171 /* Define as the return type of signal handlers (int or void). */
174 /* Define to `unsigned' if <sys/types.h> doesn't define. */
177 /* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
178 #undef STAT_MACROS_BROKEN
180 /* Define if you have the ANSI C header files. */
183 /* Define on System V Release 4. */
186 /* Define if you can safely include both <sys/time.h> and <time.h>. */
187 #undef TIME_WITH_SYS_TIME
189 /* Define to `int' if <sys/types.h> doesn't define. */
192 /* Define vfork as fork if vfork does not work. */
196 * Define this if you want SMTP (simple mail transport protocol)
197 * support. When sending mail, instead of passing the message to
198 * the mail transport agent (typically sendmail), nmh will open a
199 * socket connection to the mail port on the machine specified in
200 * the `mts.conf' file (default is localhost), and speak SMTP directly.
205 * Use sendmail as transport agent. Post messages by piping
206 * them directly to sendmail.
211 * Define this to compile client-side support for pop into
212 * inc and msgchk. Do not change this value manually. You
213 * must run configure with the '--enable-nmh-pop' option
214 * to correctly build the pop client support.
219 * Define this to compile client-side support for kpop
220 * (kerberized pop) into inc and msgchk. Do not change this
221 * value manually. You must run configure with the option
222 * '--with-krb4=PREFIX' to correctly build the kpop client support.
227 * Define this to "pop" when using Kerberos V4
229 #undef KPOP_PRINCIPAL
232 * Define this to compile support for using Hesiod to locate
233 * pop servers into inc and msgchk. Do not change this value
234 * manually. You must run configure with the option
235 * '--with-hesiod=PREFIX' to correctly build Hesiod support.
240 * Compile in support for the Emacs front-end mh-e.
244 /* Define to 1 if your termcap library has the ospeed variable */
246 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */
247 #undef MUST_DEFINE_OSPEED
249 /* Define to 1 if you have reliable signals */
250 #undef RELIABLE_SIGNALS
252 /* Define to 1 if you use POSIX style signal handling */
256 /* Define to 1 if you use BSD style signal handling (and can block signals) */
260 /* Define to 1 if you use SYS style signal handling (and can block signals) */
264 /* Define to 1 if you have no signal blocking at all (bummer) */
265 #undef NO_SIGNAL_BLOCKING
267 /* Define to `unsigned int' if <sys/types.h> or <signal.h> doesn't define */
271 * Define to 1 if your vi has ATT bug, such that it returns
272 * non-zero exit codes on `pseudo-errors'.
277 * Define to 1 if you need to make `inc' set-group-id because your mail spool is
278 * not world writable. There are no guarantees as to the safety of doing this,
279 * but this #define will add some extra security checks.
283 /* Define ruserpass as _ruserpass if your libraries have a bug *
284 * such that it can't find ruserpass, but can find _ruserpass. */
287 /* Define if your system defines TIOCGWINSZ in sys/ioctl.h. */
288 #undef GWINSZ_IN_SYS_IOCTL
290 /* Define if your system defines `struct winsize' in sys/ptem.h. */
291 #undef WINSIZE_IN_PTEM
293 /* Define to 1 if struct tm has gmtoff */
294 #undef HAVE_TM_GMTOFF
296 /* Define if your system has sigsetjmp */
297 #undef HAVE_SIGSETJMP
299 /* Define if you have the gethostbyname function. */
300 #undef HAVE_GETHOSTBYNAME
302 /* Define if you have the killpg function. */
305 /* Define if you have the lstat function. */
308 /* Define if you have the mkstemp function. */
311 /* Define if you have the sethostent function. */
312 #undef HAVE_SETHOSTENT
314 /* Define if you have the sigaction function. */
315 #undef HAVE_SIGACTION
317 /* Define if you have the sigblock function. */
320 /* Define if you have the sighold function. */
323 /* Define if you have the sigprocmask function. */
324 #undef HAVE_SIGPROCMASK
326 /* Define if you have the sigrelse function. */
329 /* Define if you have the sigsetmask function. */
330 #undef HAVE_SIGSETMASK
332 /* Define if you have the snprintf function. */
335 /* Define if you have the strdup function. */
338 /* Define if you have the strerror function. */
341 /* Define if you have the tzset function. */
344 /* Define if you have the uname function. */
347 /* Define if you have the wait3 function. */
350 /* Define if you have the waitpid function. */
353 /* Define if you have the writev function. */
356 /* Define if you have the <arpa/ftp.h> header file. */
357 #undef HAVE_ARPA_FTP_H
359 /* Define if you have the <arpa/inet.h> header file. */
360 #undef HAVE_ARPA_INET_H
362 /* Define if you have the <crypt.h> header file. */
365 /* Define if you have the <db1/ndbm.h> header file. */
366 #undef HAVE_DB1_NDBM_H
368 /* Define if you have the <dirent.h> header file. */
371 /* Define if you have the <errno.h> header file. */
374 /* Define if you have the <fcntl.h> header file. */
377 /* Define if you have the <limits.h> header file. */
380 /* Define if you have the <locale.h> header file. */
383 /* Define if you have the <memory.h> header file. */
386 /* Define if you have the <ndir.h> header file. */
389 /* Define if you have the <netdb.h> header file. */
392 /* Define if you have the <stdlib.h> header file. */
395 /* Define if you have the <string.h> header file. */
398 /* Define if you have the <sys/dir.h> header file. */
399 #undef HAVE_SYS_DIR_H
401 /* Define if you have the <sys/ndir.h> header file. */
402 #undef HAVE_SYS_NDIR_H
404 /* Define if you have the <sys/param.h> header file. */
405 #undef HAVE_SYS_PARAM_H
407 /* Define if you have the <sys/time.h> header file. */
408 #undef HAVE_SYS_TIME_H
410 /* Define if you have the <sys/utsname.h> header file. */
411 #undef HAVE_SYS_UTSNAME_H
413 /* Define if you have the <termcap.h> header file. */
414 #undef HAVE_TERMCAP_H
416 /* Define if you have the <termio.h> header file. */
419 /* Define if you have the <termios.h> header file. */
420 #undef HAVE_TERMIOS_H
422 /* Define if you have the <unistd.h> header file. */
425 /* Define if you have the m library (-lm). */
428 /* Define if you have the mkstemp library (-lmkstemp). */
429 #undef HAVE_LIBMKSTEMP
431 /* Define if you have the ndbm library (-lndbm). */
434 /* Define if you have the nsl library (-lnsl). */
437 /* Define if you have the resolv library (-lresolv). */
438 #undef HAVE_LIBRESOLV
440 /* Define if you have the socket library (-lsocket). */
441 #undef HAVE_LIBSOCKET