2 dnl configure.in -- autoconf template for nmh
8 AC_CONFIG_HEADER(config.h)
12 dnl ---------------------
13 dnl define a macro or two
14 dnl ---------------------
16 AC_DEFUN(NMH_PROG_GNU_LIBTOOL, [
17 tmptest=`$LIBTOOL --version 2>&1 | grep GNU`
18 if test x"$tmptest" != x ; then
20 AC_SUBST(GNU_LIBTOOL)dnl
25 dnl What version of nmh are we building?
26 VERSION=`sed -e 's/nmh-//' ${srcdir}/VERSION`
27 echo "configuring for nmh-$VERSION"
30 dnl --------------------------
31 dnl CHECK COMMAND LINE OPTIONS
32 dnl --------------------------
34 dnl Do you want to debug nmh?
37 [ --enable-debug enable nmh code debugging])
38 dnl The old redundant --enable-nmh-debug is deprecated and undocumented.
39 if test x"$enable_nmh_debug" = x"yes"; then
43 dnl Allow users to send email from addresses other than their default?
44 undefine([masquerade])dnl
45 AC_ARG_ENABLE(masquerade,
46 [ --enable-masquerade[='draft_from[ mmailid[ username_extension]]']
47 enable 3 types of email address masquerading [none]],
48 [if test x"$enable_masquerade" = x"yes"; then
49 masquerade="draft_from mmailid username_extension"
51 masquerade="$enable_masquerade"
53 AC_SUBST(masquerade)dnl
55 dnl Do you want mhe support?
58 [ --enable-mhe enable mhe support (DEFAULT)])
60 dnl mhe support is on by default, so define it unless --disable-mhe or the
61 dnl deprecated, undocumented --disable-nmh-mhe are specified.
62 if test x"$enable_mhe" != x"no" -a x"$enable_nmh_mhe" != x"no"; then
66 dnl Do you want client-side support for apop?
67 dnl Note that this appears before pop so that we can enforce enable-pop
69 [ --enable-apop enable client-side support for apop])
70 if test x"$enable_apop" = x"yes"; then
77 dnl Do you want support for hesiod
79 [ --with-hesiod=PREFIX specify location of Hesiod])
80 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
84 dnl Do you want client-side support for kpop
86 [ --with-krb4=PREFIX specify location of Kerberos V4 for kpop support])
87 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
90 AC_DEFINE(KPOP_PRINCIPAL, "pop")dnl
93 dnl Do you want client-side support for pop?
96 [ --enable-pop enable client-side support for pop])
97 dnl The old redundant --enable-nmh-pop is deprecated and undocumented.
98 if test x"$enable_nmh_pop" = x"yes"; then
101 if test x"$enable_pop" = x"yes"; then
104 POPSED='/^%nmhbeginpop%/d;/^%nmhendpop%/d'
106 POPSED='/^%nmhbeginpop%/,/^%nmhendpop%/d'
111 dnl What should be the default editor?
112 undefine([editor])dnl
114 [ --with-editor=EDITOR specify the default editor])
116 if test -n "$with_editor"; then
117 editorpath="$with_editor"
120 dnl What method of posting should post use?
123 [ --with-mts=MTS specify the mail transport agent])
125 if test x"$with_mts" = x"smtp"; then
127 MTSLIB="mts/smtp/libsmtp.a"
128 AC_DEFINE(SMTPMTS)dnl
129 elif test x"$with_mts" = x"sendmail"; then
131 MTSLIB="mts/sendmail/libsend.a"
132 AC_DEFINE(SENDMTS)dnl
135 MTSLIB="mts/smtp/libsmtp.a"
136 AC_DEFINE(SMTPMTS)dnl
142 dnl What should be the default pager?
145 [ --with-pager=PAGER specify the default pager])
147 if test -n "$with_pager"; then
148 pagerpath="$with_pager"
151 dnl What should be the default mail server(s)?
152 undefine([smtpservers])dnl
153 AC_ARG_WITH(smtpservers,
154 [ --with-smtpservers='SMTPSERVER1[ SMTPSERVER2...]'
155 specify the default smtp server(s) [localhost]])
156 if test -n "$with_smtpservers"; then
157 smtpservers="$with_smtpservers"
159 smtpservers="localhost"
161 AC_SUBST(smtpservers)dnl
163 dnl ----------------------------------------------------
164 dnl Default location is /usr/local/nmh/{bin,etc,lib,man}
165 dnl ----------------------------------------------------
166 AC_PREFIX_DEFAULT(/usr/local/nmh)
168 dnl ------------------
169 dnl CHECK THE COMPILER
170 dnl ------------------
171 dnl We want these before the checks,
172 dnl so the checks can modify their values.
173 test -z "$CFLAGS" && CFLAGS= auto_cflags=1
174 if test x"$enable_debug" = x"yes"; then
175 test -z "$LDFLAGS" && LDFLAGS=-g
180 dnl if the user hasn't specified CFLAGS, then
181 dnl if compiler is gcc, then
182 dnl use -O2 and some warning flags
184 if test -n "$auto_cflags"; then
185 if test x"$enable_debug" = x"yes"; then
186 if test -n "$GCC"; then
187 test -z "$CFLAGS" && CFLAGS="-Wall -g" || CFLAGS="$CFLAGS -Wall -g"
189 test -z "$CFLAGS" && CFLAGS=-g || CFLAGS="$CFLAGS -g"
192 test -z "$LDFLAGS" && LDFLAGS=-s
193 if test -n "$GCC"; then
194 test -z "$CFLAGS" && CFLAGS=-O2 || CFLAGS="$CFLAGS -O2"
196 test -z "$CFLAGS" && CFLAGS=-O || CFLAGS="$CFLAGS -O"
201 AC_C_CONST dnl Does compiler support `const'.
203 dnl ------------------
204 dnl CHECK FOR PROGRAMS
205 dnl ------------------
206 AC_PROG_MAKE_SET dnl Does make define $MAKE
207 AC_PROG_INSTALL dnl Check for BSD compatible `install'
208 AC_PROG_RANLIB dnl Check for `ranlib'
209 AC_PROG_AWK dnl Check for mawk,gawk,nawk, then awk
210 AC_PROG_LEX dnl Check for lex/flex
213 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
214 AC_PATH_PROG(cutpath, cut, no, [$pathtmp])
217 dnl try to figure out which one we've got
218 AC_CHECK_PROG(LIBTOOL, libtool, libtool, , [$pathtmp])
221 dnl Check for lorder and tsort commands
222 AC_CHECK_PROG(LORDER, lorder, lorder, no)dnl
223 AC_CHECK_PROG(TSORT, tsort, tsort, no)dnl
225 dnl If either doesn't exist, replace them with echo and cat
226 if test x$ac_cv_prog_LORDER != xlorder -o x$ac_cv_prog_TSORT != xtsort; then
231 dnl Mac OS X has lorder, but sh is too broken for it to work
232 dnl elif test -z "`lorder config/config.c 2>&1 | grep config/config.c`" ; then
235 dnl AC_SUBST(LORDER)dnl
236 dnl AC_SUBST(TSORT)dnl
240 pathtmp=/usr/bin:/bin:/usr/local/bin:/usr/xpg4/bin:/usr/ucb
241 AC_PATH_PROG(lspath, ls, no, [$pathtmp])
243 dnl See how we get ls to display the owner and the group
244 if test "$lspath" != "no"; then
245 AC_CACHE_CHECK(how to get ls to show us the group ownership of a file,
247 [if test x"`$lspath -dl / | $AWK '{print $9}'`" = x"/"; then
248 dnl There were 9 parameters, so unless this is a really bizarre, nonstandard
249 dnl ls, it would seem -l gave us both the user and group. On this type of
250 dnl ls, -g makes _only_ the group be displayed (and not the user).
251 nmh_cv_ls_grpopt="-l"
253 dnl Looks like -l only gave us the user, so we need -g to get the group too.
254 nmh_cv_ls_grpopt="-lg"
259 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
260 AC_PATH_PROG(morepath, more, no, [$pathtmp])
262 dnl If pager is not specified yet,
263 dnl then use `more' as the default.
264 if test -z "$pagerpath"; then
265 pagerpath="$morepath"
267 AC_SUBST(pagerpath)dnl
269 dnl Look for `sendmail'
270 pathtmp=/usr/lib:/usr/sbin:/usr/etc:/usr/ucblib:/usr/bin:/bin
271 AC_PATH_PROG(sendmailpath, sendmail, no, [$pathtmp])
274 pathtmp=/usr/bin:/bin:/usr/ucb:/usr/local/bin
275 AC_PATH_PROG(vipath, vi, no, [$pathtmp])
277 dnl If editor is not specified yet,
278 dnl then use `vi' as the default.
279 if test -z "$editorpath"; then
282 AC_SUBST(editorpath)dnl
284 dnl Check for broken vi
285 AC_CACHE_CHECK(for broken vi, nmh_cv_attvibug,
286 [if echo 'r /nonexist-file
287 q' | ex > /dev/null 2>&1
294 if test "$nmh_cv_attvibug" = yes; then
295 AC_DEFINE(ATTVIBUG)dnl
298 dnl ----------------------------------------------------------
299 dnl FIND MAIL SPOOL AND SEE IF WE NEED TO MAKE inc SETGID MAIL
300 dnl ----------------------------------------------------------
301 AC_CACHE_CHECK(where mail spool is located, nmh_cv_mailspool,
302 [for mailspool in /var/mail dnl
305 /dev/null; dnl Just in case we fall through
307 test -d $mailspool && break
309 nmh_cv_mailspool=$mailspool
311 mailspool=$nmh_cv_mailspool
312 AC_SUBST(mailspool)dnl
314 dnl See whether the mail spool directory is world-writable.
315 if test "$lspath" != "no" -a "$cutpath" != "no"; then
316 AC_CACHE_CHECK(whether the mail spool is world-writable,
317 nmh_cv_mailspool_world_writable,
318 [if test "`$lspath -dlL $mailspool | $cutpath -c9`" = "-"; then
319 nmh_cv_mailspool_world_writable=no
321 nmh_cv_mailspool_world_writable=yes
325 dnl ...If it's not, we need to #define MAILGROUP to 1 and make inc setgid.
326 if test x"$nmh_cv_mailspool_world_writable" = x"no"; then
327 dnl do we really need both of these?
328 AC_DEFINE(MAILGROUP)dnl
331 AC_SUBST(SETGID_MAIL)dnl
333 dnl Use ls to see which group owns the mail spool directory.
334 AC_CACHE_CHECK(what group owns the mail spool, nmh_cv_ls_mail_grp,
335 [nmh_cv_ls_mail_grp=`$lspath -dL $nmh_cv_ls_grpopt $mailspool|$AWK '{print $4}'`
337 MAIL_SPOOL_GRP=$nmh_cv_ls_mail_grp
338 AC_SUBST(MAIL_SPOOL_GRP)dnl
340 dnl ------------------
341 dnl CHECK HEADER FILES
342 dnl ------------------
348 AC_CHECK_HEADERS(string.h memory.h stdlib.h unistd.h errno.h fcntl.h \
349 limits.h crypt.h termcap.h termio.h termios.h locale.h \
350 netdb.h sys/param.h sys/time.h sys/utsname.h arpa/inet.h \
354 AC_CACHE_CHECK(POSIX termios, nmh_cv_sys_posix_termios,
355 [AC_TRY_LINK([#include <sys/types.h>
357 #include <termios.h>],
358 [/* SunOS 4.0.3 has termios.h but not the library calls. */
360 nmh_cv_sys_posix_termios=yes, nmh_cv_sys_posix_termios=no)])
362 if test $nmh_cv_sys_posix_termios = yes; then
363 AC_CACHE_CHECK(TIOCGWINSZ in termios.h,
364 nmh_cv_header_termios_h_tiocgwinsz,
365 [AC_TRY_LINK([#include <sys/types.h>
366 #include <termios.h>],
367 [int x = TIOCGWINSZ;],
368 nmh_cv_header_termios_h_tiocgwinsz=yes,
369 nmh_cv_header_termios_h_tiocgwinsz=no)])
371 nmh_cv_header_termios_h_tiocgwinsz=no
374 if test $nmh_cv_header_termios_h_tiocgwinsz = no; then
375 AC_CACHE_CHECK(TIOCGWINSZ in sys/ioctl.h,
376 nmh_cv_header_sys_ioctl_h_tiocgwinsz,
377 [AC_TRY_LINK([#include <sys/types.h>
378 #include <sys/ioctl.h>],
379 [int x = TIOCGWINSZ;],
380 nmh_cv_header_sys_ioctl_h_tiocgwinsz=yes,
381 nmh_cv_header_sys_ioctl_h_tiocgwinsz=no)])
382 if test $nmh_cv_header_sys_ioctl_h_tiocgwinsz = yes; then
383 AC_DEFINE(GWINSZ_IN_SYS_IOCTL)
388 dnl Checks for _IO_write_ptr. A Linuxism used by nmh on linux. We
389 dnl really use a whole set of them, but this check should be
392 AC_CHECK_HEADER(libio.h, [
393 AC_EGREP_HEADER(_IO_write_ptr, libio.h, [
394 AC_DEFINE(LINUX_STDIO) ]) ])
396 AC_CHECK_HEADER([sys/ptem.h], AC_DEFINE(WINSIZE_IN_PTEM))
402 AC_CHECK_LIB(mkstemp,mkstemp)
403 AC_CHECK_FUNCS(waitpid wait3 sigaction sigprocmask sigblock sigsetmask \
404 sighold sigrelse writev lstat uname tzset killpg mkstemp \
407 dnl solaris screws this up
408 AC_CHECK_FUNC(gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)],
409 AC_CHECK_LIB(nsl, gethostbyname, [AC_DEFINE(HAVE_GETHOSTBYNAME)] ) )
411 dnl sigsetjmp may be a macro
412 AC_MSG_CHECKING(for sigsetjmp)
413 AC_TRY_LINK([#include <setjmp.h>], [sigsetjmp((void *)0, 0);],
414 [AC_DEFINE(HAVE_SIGSETJMP) AC_MSG_RESULT(yes)], AC_MSG_RESULT(no))
416 AC_REPLACE_FUNCS(snprintf strerror strdup)
418 dnl Look for the initgroups() declaration. On AIX 4.[13], Solaris 4.1.3, and
419 dnl ULTRIX 4.2A the function is defined in libc but there's no declaration in
420 dnl any system header.
422 dnl On Solaris 2.[456], the declaration is in <grp.h>. On HP-UX 9-11 and
423 dnl (reportedly) FreeBSD 3.[23], it's in <unistd.h>. Any other locations we
425 AC_EGREP_HEADER(initgroups, grp.h, AC_DEFINE(INITGROUPS_HEADER, <grp.h>),
426 AC_EGREP_HEADER(initgroups, unistd.h,
427 AC_DEFINE(INITGROUPS_HEADER, <unistd.h>)))
429 dnl On AIX 4.1, snprintf() is defined in libc.a but there's no prototype in
430 dnl <stdio.h> or elsewhere. Apparently it's not officially supported (though it
431 dnl seems to work perfectly and IBM apparently uses it in internal code).
432 dnl Anyhow, if we omit our own snprintf() and vsnprintf() prototypes when we
433 dnl HAVE_SNPRINTF, we get a billion warnings at compile time. Use the C
434 dnl preprocessor to preprocess stdio.h and make sure that there's actually a
436 AC_EGREP_HEADER(snprintf, stdio.h, AC_DEFINE(HAVE_SNPRINTF_PROTOTYPE))
438 dnl -------------------
439 dnl CHECK FOR LIBRARIES
440 dnl -------------------
441 dnl Check location of modf
442 AC_CHECK_FUNC(modf, , AC_CHECK_LIB(m, modf))
444 dnl Checks for network libraries (nsl, socket)
447 termcap_curses_order="termcap curses ncurses"
448 for lib in $termcap_curses_order; do
449 AC_CHECK_LIB(${lib}, tgetent, [TERMLIB="-l$lib"; break])
458 AC_CHECK_FUNC(dbm_open, ,
459 AC_CHECK_LIB(ndbm, dbm_open, ,
460 AC_CHECK_LIB(dbm, dbm_open)))
465 AC_CHECK_HEADERS(db1/ndbm.h)
470 if test x"$with_hesiod" != x -a x"$with_hesiod" != x"no"; then
471 if test x"$with_hesiod" != x"yes"; then
472 HESIOD_INCLUDES="-I$with_hesiod/include"
473 HESIOD_LIBS="-L$with_hesiod/lib"
475 AC_CHECK_FUNC(res_send, ,
476 AC_CHECK_LIB(resolv, res_send))
477 AC_CHECK_LIB(hesiod, hes_resolve, [HESIOD_LIBS="$HESIOD_LIBS -lhesiod"],
478 [AC_MSG_ERROR(Hesiod library not found)], $HESIOD_LIBS)
480 AC_SUBST(HESIOD_INCLUDES)dnl
481 AC_SUBST(HESIOD_LIBS)dnl
483 dnl ----------------------------------
484 dnl CHECK FOR KRB4 (Kerberos4 support)
485 dnl ----------------------------------
486 if test x"$with_krb4" != x -a x"$with_krb4" != x"no"; then
487 if test x"$with_krb4" != x"yes"; then
488 KRB4_INCLUDES="-I$with_krb4/include"
489 if test -d "$with_krb4/include/kerberosIV"; then
490 KRB4_INCLUDES="$KRB4_INCLUDES -I$with_krb4/include/kerberosIV"
492 KRB4_LIBS="-L$with_krb4/lib"
493 elif test -d /usr/include/kerberosIV; then
494 KRB4_INCLUDES="-I/usr/include/kerberosIV"
496 AC_CHECK_LIB(krb4, krb_rd_req,
497 [KRB4_LIBS="$KRB4_LIBS -lkrb4 -ldes425 -lkrb5 -lcrypto -lcom_err"],
498 [AC_CHECK_LIB(krb, krb_rd_req,
499 [KRB4_LIBS="$KRB4_LIBS -lkrb -ldes"],
500 [AC_MSG_ERROR(Kerberos 4 libraries not found)],
502 $KRB4_LIBS -ldes425 -lkrb5 -lcrypto -lcom_err)
504 AC_SUBST(KRB4_INCLUDES)dnl
505 AC_SUBST(KRB4_LIBS)dnl
507 dnl ---------------------
508 dnl CHECK TERMCAP LIBRARY
509 dnl ---------------------
511 dnl Add the termcap library, so that the following configure
512 dnl tests will find it when it tries to link test programs.
513 nmh_save_LIBS="$LIBS"
514 LIBS="$TERMLIB $LIBS"
516 dnl Checks for external variable ospeed in the termcap library.
517 AC_CACHE_CHECK(if an include file defines ospeed,
518 nmh_cv_decl_ospeed_include_defines,
520 [#include <sys/types.h>
526 #endif], [ospeed = 0;],
527 nmh_cv_decl_ospeed_include_defines=yes,
528 nmh_cv_decl_ospeed_include_defines=no)])
530 if test $nmh_cv_decl_ospeed_include_defines = no; then
531 AC_CACHE_CHECK(if you must define ospeed,
532 nmh_cv_decl_ospeed_must_define,
533 [AC_TRY_LINK( ,[extern short ospeed; ospeed = 0;],
534 nmh_cv_decl_ospeed_must_define=yes,
535 nmh_cv_decl_ospeed_must_define=no)])
538 if test $nmh_cv_decl_ospeed_include_defines = yes; then
539 AC_DEFINE(HAVE_OSPEED)
540 elif test $nmh_cv_decl_ospeed_must_define = yes; then
541 AC_DEFINE(HAVE_OSPEED)
542 AC_DEFINE(MUST_DEFINE_OSPEED)
545 dnl dnl Checks if tgetent accepts NULL and will
546 dnl dnl allocate its own termcap buffer.
547 dnl AC_CACHE_CHECK(if tgetent accepts NULL,
548 dnl nmh_cv_func_tgetent_accepts_null,
549 dnl [AC_TRY_RUN([main(){int i = tgetent((char*)0,"vt100");exit(!i || i == -1);}],
550 dnl nmh_cv_func_tgetent_accepts_null=yes,
551 dnl nmh_cv_func_tgetent_accepts_null=no,
552 dnl nmh_cv_func_tgetent_accepts_null=no)])
553 dnl if test $nmh_cv_func_tgetent_accepts_null = yes; then
554 dnl AC_DEFINE(TGETENT_ACCEPTS_NULL)
557 dnl Now put the libraries back to what it was before we
558 dnl starting checking the termcap library.
559 LIBS="$nmh_save_LIBS"
571 dnl Check for sigset_t. Currently I'm looking in
572 dnl <sys/types.h> and <signal.h>. Others might need
574 AC_CACHE_CHECK(for sigset_t, nmh_cv_type_sigset_t,
576 [#include <sys/types.h>
577 #include <signal.h>], [sigset_t tempsigset;],
578 nmh_cv_type_sigset_t=yes, nmh_cv_type_sigset_t=no)])
579 if test $nmh_cv_type_sigset_t = no; then
580 AC_DEFINE(sigset_t, unsigned int)
588 AC_CACHE_CHECK(for tm_gmtoff in struct tm, nmh_cv_struct_tm_gmtoff,
590 [#ifdef TIME_WITH_SYS_TIME
591 # include <sys/time.h>
594 # ifdef TM_IN_SYS_TIME
595 # include <sys/time.h>
600 [struct tm temptm; temptm.tm_gmtoff = 0;],
601 nmh_cv_struct_tm_gmtoff=yes, nmh_cv_struct_tm_gmtoff=no)])
602 if test $nmh_cv_struct_tm_gmtoff = yes; then
603 AC_DEFINE(HAVE_TM_GMTOFF)
609 dnl What style of signal do you have (POSIX, BSD, or SYSV)?
610 AC_MSG_CHECKING(what style of signals to use)
611 if test $ac_cv_func_sigaction = yes -a $ac_cv_func_sigprocmask = yes; then
612 signals_style=POSIX_SIGNALS
613 AC_DEFINE(POSIX_SIGNALS)
614 AC_DEFINE(RELIABLE_SIGNALS)
615 elif test $ac_cv_func_sigblock = yes -a $ac_cv_func_sigsetmask = yes; then
616 signals_style=BSD_SIGNALS
617 AC_DEFINE(BSD_SIGNALS)
618 AC_DEFINE(RELIABLE_SIGNALS)
619 elif test $ac_cv_func_sighold = yes -a $ac_cv_func_sigrelse = yes; then
620 signals_style=SYSV_SIGNALS
621 AC_DEFINE(SYSV_SIGNALS)
623 signals_style=NO_SIGNAL_BLOCKING
624 AC_DEFINE(NO_SIGNAL_BLOCKING)
627 AC_MSG_RESULT($signals_style)
629 dnl Where is <signal.h> located? Needed as input for signames.awk
630 AC_CACHE_CHECK(where signal.h is located, nmh_cv_path_signal_h,
631 [for SIGNAL_H in /usr/include/bsd/sys/signal.h dnl Next
632 /usr/include/asm/signal.h dnl Linux 1.3.0 and above
633 /usr/include/asm/signum.h dnl some versions of Linux/Alpha
634 /usr/include/linux/signal.h dnl Linux up to 1.2.11
635 /usr/include/sys/signal.h dnl Almost everybody else
636 /dev/null; dnl Just in case we fall through
638 test -f $SIGNAL_H && \
639 grep '#[ ]*define[ ][ ]*SIG[0-9A-Z]*[ ]*[0-9][0-9]*' $SIGNAL_H > /dev/null && \
642 nmh_cv_path_signal_h=$SIGNAL_H
644 SIGNAL_H=$nmh_cv_path_signal_h
645 AC_SUBST(SIGNAL_H)dnl
648 dnl OS SPECIFIC DEFINES
689 AC_DEFINE(SCO_5_STDIO)
697 AC_OUTPUT(Makefile config/Makefile h/Makefile sbr/Makefile uip/Makefile \
698 zotnet/Makefile zotnet/mts/Makefile zotnet/tws/Makefile \
699 zotnet/mf/Makefile zotnet/bboards/Makefile mts/Makefile \
700 mts/smtp/Makefile mts/sendmail/Makefile mts/mmdf/Makefile \
701 etc/Makefile man/Makefile, \
702 [test -z "$CONFIG_HEADERS" || echo > stamp-h])
704 dnl Umm, what's the point of these assignments?? -- <dan-nmh@dilvish.speed.net>
705 eval "nmhbin=${bindir}"; eval "nmhbin2=${nmhbin}"
706 eval "nmhsysconf=${sysconfdir}"; eval "nmhsysconf2=${nmhsysconf}"
707 eval "nmhlib=${libdir}"; eval "nmhlib2=${nmhlib}"
708 eval "nmhman=${mandir}"
711 if test x"$enable_pop" = x"yes"; then
713 if test x"$enable_apop" = x"yes"; then
714 pop_kinds="${pop_kinds} apop"
716 if test x"$with_krb4" = x"yes"; then
717 pop_kinds="${pop_kinds} kpop"
719 if test "$pop_kinds" = "yes (pop"; then
722 pop_kinds="${pop_kinds})"
729 nmh version : ${VERSION}
730 target os : ${target}
732 compiler flags : ${CFLAGS}
733 linker flags : ${LDFLAGS}
734 source code location : ${srcdir}
735 binary install path : ${nmhbin2}
736 libary install path : ${nmhlib2}
737 config files install path : ${nmhsysconf2}
738 man page install path : ${nmhman}
739 transport system : ${MTS}
740 default smtp servers : ${smtpservers}
741 default editor : ${editorpath}
742 default pager : ${pagerpath}
743 email address masquerading : ${masquerade}
744 pop is enabled : ${pop_kinds}"